hey man great job !! i have had mine for 2 years now have done 5,400 cuts which is about 125 signs .... i use 5052 billet .063 and .100 for all my metal art ... the machine is awesome as you said and its a killer money maker i love it 😊 great video love that you keep your shop clean as well. spicer Design is an awesome guy to follow he does great videos ... thanks Richie
Get some more water in your table, so about half inch from the top, it really helps with stopping warping and the parts are never hot when they come off.
It’s not bad, I do let the machine rest about every 6-7 minutes if it’s running straight this way it allows the plasma cutter to cool down, and the compressor to refill.
nice man, Although I would have just put the filter right on or near the Air compressor, and have filtered air to all your tools, not just that one, unless you're just plugging in all your tools into the filters where it sits.
nice work...........get going with QCAD & SheetCAM designing your own parts (not Confusion 360) more water in the table is a double edged sword............really makes a mess........ we built removable Plexi splash guards for our little Crossfire table....post Covid there is tons of it around and we got 4x4 sheets from local School Dept. when I design in bend kerfs I use a "dashed" line approach esp on long bends to keep everything aligned always keeping the ends solid...........enjoy.....73 Mike K1FNX near Boston
Super cool vid! Congrats on the new setup! I’m trying to get there myself. I’ve been reading a lot on this machine. I saw that some are doing 1.5x the recommended 6CFM @ 90PSI. I noticed yours was at 5.1CFM @ 90PSI. Has this given you any issues since starting? Thanks in advance.
That cut quality is insane. Mind sharing your 2d profile settings? I'm getting really inconsistent results on 14ga with smaller detailed work like lettering. Been running 40A 140ipm with all different lead in and finishing pass settings. Big stuff looks great. Small stuff looks like cat puke. 😮
SUPER BADASS my man! Great purchase, and I LOVE mine too. You’re doing life right. Good on ya!
Hell yeah man thanks! 🔥
hey man great job !! i have had mine for 2 years now have done 5,400 cuts which is about 125 signs .... i use 5052 billet .063 and .100 for all my metal art ... the machine is awesome as you said and its a killer money maker i love it 😊 great video love that you keep your shop clean as well. spicer Design is an awesome guy to follow he does great videos ... thanks Richie
Thank you man! Still using it now!
Great job buddy! Good luck with the new setup. Looks like youve got a pretty good handle on it.
Thank you brother!
Great job Brother. Thank you for the video, simple and to the point.
Thank you, appreciate it!
Ordering mine next week. Ready to get going.
Hell yeah man! 🔥
Nice ...keep up the good work
Appreciate it!
Nice work,they look great machines
Thank you!
Nice
Thanks!
Get some more water in your table, so about half inch from the top, it really helps with stopping warping and the parts are never hot when they come off.
That is true! I did fill up the water more and it helped a lot!
How well does that compressor keep up?
It’s not bad, I do let the machine rest about every 6-7 minutes if it’s running straight this way it allows the plasma cutter to cool down, and the compressor to refill.
nice man, Although I would have just put the filter right on or near the Air compressor, and have filtered air to all your tools, not just that one, unless you're just plugging in all your tools into the filters where it sits.
I actually added a second filter right off the compressor!
@@JaimmyAC nice!
I've got a question. Does the software allow you to set the table size, allowing you the ability to expand the table size down the road if you want?
Yes, I believe the software is the same, even for the bigger table.
Does the plasma cutter cut into the support beams coming out of the water? Would they need to be replaced eventually? Nice video
After a while yes you would need to replace them, I just recently flipped them, so they should be good for a while.
And floorboards!!!!😂
nice work...........get going with QCAD & SheetCAM designing your own parts (not Confusion 360) more water in the table is a double edged sword............really makes a mess........ we built removable Plexi splash guards for our little Crossfire table....post Covid there is tons of it around and we got 4x4 sheets from local School Dept. when I design in bend kerfs I use a "dashed" line approach esp on long bends to keep everything aligned always keeping the ends solid...........enjoy.....73 Mike K1FNX near Boston
It’s bad ass I love it!
Need a small CNC brake now.
That would be sick!
What software do you use for cad and cam and is it easy to use?
Fusion360. Yea it’s not that bad!
Guapoooooo❤❤❤
Super cool vid! Congrats on the new setup! I’m trying to get there myself. I’ve been reading a lot on this machine. I saw that some are doing 1.5x the recommended 6CFM @ 90PSI. I noticed yours was at 5.1CFM @ 90PSI. Has this given you any issues since starting? Thanks in advance.
No issues at all, the compressor has been holding up just fine for long cuts no problem!
@@JaimmyAC That’s interesting, appreciate your feedback. I’ll be looking to get that same one for my garage. :)
That cut quality is insane. Mind sharing your 2d profile settings? I'm getting really inconsistent results on 14ga with smaller detailed work like lettering. Been running 40A 140ipm with all different lead in and finishing pass settings. Big stuff looks great. Small stuff looks like cat puke. 😮
Haha, I honestly forgot what settings I am using it at for 14 gauge, but I can get back to you on that!
Are you still liking the plasma cutter?
I love it!
Where's my beer opener?
It’s waiting here for you!
Need a new rad cover!!!
Let me know! I can make a custom one for you!
Would you be intrested in a collab ?
I’m interested