Hello, I know now 4 years ago from posting your video. However, I have problem need to be solved. I don't know if it's because machine or cam system. our machine is VF2TR and Mastercam 2017. later I tried many times to operate multi axis nc program but no success. I don't have this template mentioned in time (25:26) and also I don't have these settings (300 to 305). Is it normal for such VF2TR because there are another settings like (205 to... I don't remember now) for MRZP (neither Mater nor sleeve)
Hi, I have a Haas and Mastercam with a 4th (A) axis. Is it possible to do 4th DWO option during simultaneous work? That is, if you fix the cylindrical stock off-axis, it will freewheel as if it were a crankshaft, but will it be able to process evenly from all sides? Is this possible? I am resetting the parts in full axis right now. I just wondered about the DWO convenience. Is this option included when I buy 5 Axis? By the way u r great man John.
if we first even fully use c axis on lathe make minium atleast hex LOL if he would know it could do many parts one setup he would put silly jobs on that machine that allready had programs on other machine. 2 new machine came and he told mayby rotary come and not even remember lathe has c why waste that on silly parts that can break machine without never even use c. like old machine LOL parts like bolt. first lathe and center drill. then mill hex. then back lathe. or do hex and center drill same time. simple custom makro i allready have LOL milling makro just converted c axis
I don't fear 5 axis. Just too broke to afford one.
Great video, thank you. One thing though, it's really three ops. The dovetail prep is also an op. You have to include it in your quote.
Thanks for the educational video. I hast opened my eyes and made me hungry to learn more.
Hello, I know now 4 years ago from posting your video. However, I have problem need to be solved. I don't know if it's because machine or cam system. our machine is VF2TR and Mastercam 2017. later I tried many times to operate multi axis nc program but no success. I don't have this template mentioned in time (25:26) and also I don't have these settings (300 to 305). Is it normal for such VF2TR because there are another settings like (205 to... I don't remember now) for MRZP (neither Mater nor sleeve)
Tku so much for ur 5th axis information, it's very useful operators
It is a very much informative video. Thanks.👍
Thanks for the information sir..it was very useful in my work journey. 👍
Antonmursidmegaiudustri🙏🙏🙏🙏🙏✌💝👌🇲🇨🇲🇨🇲🇨🇲🇨🇲🇨✌💝👌
21:55 there it is. now it rotate correct. correect your video. its annoying error lol
I need to buy 4th axis and add rotary table on the plate, so I will save $$$, any advices ?
Congratulations 👏.
5 axis look like fun
Great Video
assuming you don't have DWO/TCPC, how you set your CAM if Y axis resulted from A-90 and A90 is different than Y axis of the rotary axis (C)?
move part in cad software and post new program. if stock change. do it again. and hope cad code is correct and not need read line by line LOL.
Hi, I have a Haas and Mastercam with a 4th (A) axis. Is it possible to do 4th DWO option during simultaneous work? That is, if you fix the cylindrical stock off-axis, it will freewheel as if it were a crankshaft, but will it be able to process evenly from all sides? Is this possible? I am resetting the parts in full axis right now. I just wondered about the DWO convenience. Is this option included when I buy 5 Axis? By the way u r great man John.
do you have a post for heidenhain ?
@@christophercolumbus8944 yes I have
Is the 5 axis with this set up continous or indexed type?
useful , thanks.
18:07 not make sense. it should rotate other way OR A and B was rotate wrong
the post is the only part annoying me with 5axis at the start
The problem is HOW MUCH TIME I HAVE LEFT.
Don't fear 5 axis...Fear having to change offsets in 8axis.
Nice1.
Antonmursidmegamesin🙏🙏🙏🙏🙏✌💝👌🇲🇨🇲🇨🇲🇨🇲🇨🇲🇨✌💝👌
Sir, I am from Pakistan, I want to work in your shop. can I get an opportunity for an internship... your work is really nice
if we first even fully use c axis on lathe make minium atleast hex LOL if he would know it could do many parts one setup he would put silly jobs on that machine that allready had programs on other machine. 2 new machine came and he told mayby rotary come and not even remember lathe has c why waste that on silly parts that can break machine without never even use c. like old machine LOL parts like bolt. first lathe and center drill. then mill hex. then back lathe. or do hex and center drill same time. simple custom makro i allready have LOL milling makro just converted c axis