Toyota Tundra leveling kit install

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 ส.ค. 2024
  • Leveling kit amzn.to/3wPMf0h Toyota Tundra leveling kit install . This is a KSP Performance leveling kit 2018 Toyota Tundra
    DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support this channel and allows me to continue to make videos like this. Thank you for your support!
    How I am successful on TH-cam TubeBuddy: www.tubebuddy....
    This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results, some of the projects could be dangerous if not done properly. Andy the X tech

ความคิดเห็น • 199

  • @AndyTheXTech
    @AndyTheXTech  ปีที่แล้ว

    Leveling kit: amzn.to/3mKGM5X

  • @trickhealey
    @trickhealey 2 ปีที่แล้ว +22

    I can’t tell you how much I appreciate your video editing style. There was no droning on and on for 15 minutes before you touch a wrench. 10 of 10 would recommend

    • @AndyTheXTech
      @AndyTheXTech  2 ปีที่แล้ว

      Awesome! Thank you So much. I try to make my videos as interesting as possible and the information that I would want. 😁👍

  • @colevickers2650
    @colevickers2650 ปีที่แล้ว +2

    Thanks. I ditched the instructions and used this video to get through the install. Much appreciated.

    • @AndyTheXTech
      @AndyTheXTech  ปีที่แล้ว

      Awesome! I tried to make it easy.

  • @davidcisneros4400
    @davidcisneros4400 4 ปีที่แล้ว +12

    Enjoyed the video! Crazy how a simple 2 inch leveling kit could make the truck look so much better.

    • @AndyTheXTech
      @AndyTheXTech  4 ปีที่แล้ว +1

      Thank you! Yes is a big difference and it doesn’t cost a lot. I was surprised.

    • @tewksburydriver8624
      @tewksburydriver8624 4 ปีที่แล้ว +2

      stock is better. Ride is better, longevity of the truck is better. I've had two leveled Chevy trucks and it did affect the ride quality despite what anyone tells you. Level kits are fine for 20k miles then you will see why its a bad idea. Just get a real suspension upgrade if you really need that level look. I would never do this to a 40k plus truck ever again.

    • @AndyTheXTech
      @AndyTheXTech  4 ปีที่แล้ว

      tewksbury driver thanks for the feedback. 👍

    • @livingadreamlife1428
      @livingadreamlife1428 2 ปีที่แล้ว

      @@tewksburydriver8624 I was questioning the purpose of a leveling kit while watching this video. Other than the look
      of the vehicle, I don’t see a performance benefit unless you’re rock climbing or doing serious off-roading and need clearance.

    • @balkee42
      @balkee42 ปีที่แล้ว +2

      @@livingadreamlife1428 to fit a bigger tire

  • @DoneWaiting
    @DoneWaiting 10 หลายเดือนก่อน +1

    Really nice video. Couple side notes; When I went looking into the levelers I found Bilstein has adjustable leveling strut assemblies. This would help with the left to right delta you measured as well. If you have to replace the struts I might suggest the struts with levelling included. This adjustment is only good up to a couple inches, but that's sort of what levelling is I guess. All that said, a levelling puck is much less expensive if the struts are still good. Additional note from Bilstein, the warranty is voided with a levelling puck. This whole leveling thing had a lot of details.

  • @rdunkin7298
    @rdunkin7298 3 ปีที่แล้ว +3

    Thanks for the video. I'm doing a lift install and have been searching vids and this one is one of the better ones I've seen!

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว

      Awesome! Thanks for the comment. Good luck with your install! 👍

  • @pulpo.r7790
    @pulpo.r7790 ปีที่แล้ว +3

    Awesome video. @ min 2:58. That as what I was looking for how to rotate the strut to realign the holes. Nice.

    • @AndyTheXTech
      @AndyTheXTech  ปีที่แล้ว

      Great! 👍 I had trouble finding videos on this when I was making it.

  • @mdhdhair
    @mdhdhair 3 ปีที่แล้ว +3

    I'm having the same issue with the sway bar... good advice!! Also having a hard time re-attaching the two steering knuckle bolts on the passenger side. Might need to pop the upper control arm so it will drop down enough to re attach.. Good video! Thanks!!

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว

      Yup you’re right I should’ve mentioned some thing about those bolts being difficult as well. Thanks for checking out the video. 👍

    • @ozzie3056
      @ozzie3056 2 ปีที่แล้ว

      Use a long pry bar on the upper control arm. Pry it some where by the top of the strut pulling down on it.

  • @bassmandave5865
    @bassmandave5865 3 ปีที่แล้ว +3

    Just getting ready to do this to my Tundra. This video was very helpful! Thanks man!

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว

      You’re welcome! That’s why I made it I’m glad to help. Thanks for checking out the video.

    • @bassmandave5865
      @bassmandave5865 3 ปีที่แล้ว +2

      I installed the leveling kit on my Tundra yesterday employing the instructions you provided, the install went VERY well thanks to you.

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว

      @@bassmandave5865 awesome great to here. Not to bad right? I’m glad it worked for you.

  • @danibo47
    @danibo47 ปีที่แล้ว +1

    Been there done that 👍🏽 I also added 3” wheel spacers to oem wheels.

  • @markpachowicz8403
    @markpachowicz8403 3 ปีที่แล้ว +2

    Definitely going to have someone else do this to my truck

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว

      Yep it’s good to know your limits. Thanks for checking out the video. 👍

  • @scottfowler8380
    @scottfowler8380 ปีที่แล้ว +2

    Be sure to have the control arms at opening height before tightening the bolts. If not the bushings will prematurely fail.

    • @AndyTheXTech
      @AndyTheXTech  ปีที่แล้ว

      Yes 100% Didn’t I say that in the video?

    • @scottfowler8380
      @scottfowler8380 ปีที่แล้ว +1

      @@AndyTheXTech you probably did. I have a bad habit of commenting before the video is finished.

    • @AndyTheXTech
      @AndyTheXTech  ปีที่แล้ว +1

      @@scottfowler8380 it’s cool! Either way you’re helping my TH-cam algorithm. 👍

  • @leoandhannah123456
    @leoandhannah123456 4 ปีที่แล้ว +5

    Yeah that def looks better. Great video !! Thanks for a fun vid.

    • @AndyTheXTech
      @AndyTheXTech  4 ปีที่แล้ว

      Thanks man it was fun. 😉👍

  • @ScooterBlia2
    @ScooterBlia2 4 ปีที่แล้ว +2

    Good tip on those sway bars.

    • @AndyTheXTech
      @AndyTheXTech  4 ปีที่แล้ว +1

      Ya that was kicking my butt for a while. But easy once on the ground. Thanks for checking it out and the comment. 👍

  • @theninja001
    @theninja001 4 ปีที่แล้ว +3

    Why did you loosen the cam bolts? Just leave them alone! You can still get the strut out! The sway bar is the important thing to remove

    • @AndyTheXTech
      @AndyTheXTech  4 ปีที่แล้ว +2

      It makes it easier to swing the lower control arm down. Plus after when you torque them while the truck is on the ground the bushing won’t be tension on the them. Which will help the bushings last longer. 😉👍

    • @theninja001
      @theninja001 4 ปีที่แล้ว +1

      @@AndyTheXTech I guess if you match the paint pen marks, but I’d rather leave it alone!

    • @AndyTheXTech
      @AndyTheXTech  4 ปีที่แล้ว

      Yup I hear ya. The less you touch the better. Either way you should still get an alignment anyway.

  • @carolinatrailsoff-road7360
    @carolinatrailsoff-road7360 ปีที่แล้ว +1

    After you installed the spacer and reinstalled the strut, I noticed you used a tire iron and kept spinning the lower strut mount. Im guessing you had alignment issues with the lower strut mount? I ask this because I’m going to install a 1.75” RC leveling kit on my 2022, and one of the step is to use a spring compressor and spin the top hat of the strut to index it for alignment purposes. If I can skip the spring compressor and just spin the bottom strut mount with a tire iron (with out damaging the strut) that’s the obvious easier route. Thanks for your feedback man.

    • @AndyTheXTech
      @AndyTheXTech  ปีที่แล้ว

      Yeah that’s the reason why I showed it in real time.

    • @jameshoward8491
      @jameshoward8491 ปีที่แล้ว

      How did you keep the spring from sliding out is the perch stop in the bottom the passenger side was easy cause it goes toward it . But comes away on the driver side

  • @luissantiago2586
    @luissantiago2586 3 ปีที่แล้ว +2

    Thanks I'm putting one on rn!😄

  • @beaneesrotties420
    @beaneesrotties420 ปีที่แล้ว +1

    Good looking out on the video my brother.

  • @kccreations5945
    @kccreations5945 4 ปีที่แล้ว +4

    Hey man great video! I have a 2” pro comp strut spacer kit that I’m planning to put on. Do you think getting a rear block is necessary or does it look pretty level to you? Thanks!

    • @AndyTheXTech
      @AndyTheXTech  4 ปีที่แล้ว +1

      Thanks! I think it looks good with just the front lifted. But you can always add rear block later if you want more. Thanks for the comment and checking out the video.

  • @robertroberts3604
    @robertroberts3604 ปีที่แล้ว +1

    I’m having trouble getting the bolts lined up after I put my spacer on finding the right position

    • @AndyTheXTech
      @AndyTheXTech  ปีที่แล้ว

      Yes that can be tough. And you have to rotate the shock as I show in the video.

  • @jeremiahstallings3349
    @jeremiahstallings3349 2 ปีที่แล้ว +1

    Great video. Any recommendations on what leveling kit to go with if I am planning on adding airbags in the back? I can't find any information on a Tundra leveled with airbags too. I pull a camper and the weight distribution hitch may be all I need? It currently sets level once I get the bars in place. I'm thinking about doing both, but I think the airbags will add 3/4" in the back? I still want it to be level? Maybe I should just level the front and see if the hitch needs to be adjusted?

    • @AndyTheXTech
      @AndyTheXTech  2 ปีที่แล้ว

      Ya I like the 2in. I think any higher might be to much. But it’s whatever you like. 👍

  • @johnbarton7058
    @johnbarton7058 3 ปีที่แล้ว +3

    Nice job bud!

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว

      Thanks! I have fun doing it.

  • @caboverkaylee1374
    @caboverkaylee1374 3 ปีที่แล้ว +1

    Awesome video dude!

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว +1

      Thanks I try to make it easy to understand and interesting to watch.

  • @markmaxwell1096
    @markmaxwell1096 ปีที่แล้ว +1

    Does it throw the headlight out of adjustment range? Seems like you would want the rake if you tow. Added weight of towing would squat the rear, so with leveling kit truck would sit like it’s going up hill.

    • @AndyTheXTech
      @AndyTheXTech  ปีที่แล้ว

      Ya it would effect your headlights slightly. It would be a good idea to aim them after. The owner did tow with the truck but he also added a rear spring helpers. Active suspension kit.

  • @Dantrdoffroad
    @Dantrdoffroad 3 ปีที่แล้ว +2

    My tundra too when I add level kit and done with alignment I check that driver side is 1/2 inch lower than passenger side.

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว +2

      Ya there isn’t much you can do about it. It’s minimal. No one else can tell just by looking at it.

    • @ridingmaine9365
      @ridingmaine9365 3 ปีที่แล้ว +1

      Or the caster is different between sides.

    • @Dantrdoffroad
      @Dantrdoffroad 3 ปีที่แล้ว +1

      @@ridingmaine9365 yes, it might be true. I agree with you.

    • @ridingmaine9365
      @ridingmaine9365 3 ปีที่แล้ว

      @@Dantrdoffroad also could be as simple as air pressure in the tires.

    • @AllinFPV
      @AllinFPV 2 ปีที่แล้ว

      @@AndyTheXTech tundra lean! Can be fixed with shims, but it’s normal

  • @michaelkavanaugh5179
    @michaelkavanaugh5179 ปีที่แล้ว +1

    Did your tire noise become louder after the lift

    • @AndyTheXTech
      @AndyTheXTech  ปีที่แล้ว

      Nope. The ride was great after. Not much change.

  • @LoopDoc
    @LoopDoc 4 ปีที่แล้ว +2

    Enjoyed this video. I want to do the same leveling lift on mine. But I want to add 22” rims with all terrain tires. I also have a tundra. Does this sound doable?

    • @AndyTheXTech
      @AndyTheXTech  4 ปีที่แล้ว +2

      Ya that sounds realistic. Thanks for checking out the video.

    • @LoopDoc
      @LoopDoc 4 ปีที่แล้ว +1

      Andy The X Tech thanks man

  • @CatNaps33
    @CatNaps33 3 ปีที่แล้ว +1

    Thank you sir

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว +1

      You’re welcome! Thank you for watching! 👍

  • @tl8483
    @tl8483 2 ปีที่แล้ว +2

    Was the rest of your suspension stock? No other upgrades required when you added this leveling kit?

    • @AndyTheXTech
      @AndyTheXTech  2 ปีที่แล้ว

      We did add the active suspension in the rear but that was only because the owner tows a camper with it. You shouldn’t have to add anything else if you don’t want to. There is another video on my channel installing the active suspension if your interested.

  • @braulioguaman7596
    @braulioguaman7596 2 ปีที่แล้ว +1

    Good video...do you think a 3 inch kit its Goin give problem to the suspension?

    • @AndyTheXTech
      @AndyTheXTech  2 ปีที่แล้ว

      Thanks. Well the higher you go the more strain on the front CV axles. I don't know for sure it may be fine.

  • @Coatomc
    @Coatomc 4 ปีที่แล้ว +3

    Looks better for sure but I’mma have to hire a company to install it!

    • @AndyTheXTech
      @AndyTheXTech  4 ปีที่แล้ว +1

      Nice 👍 thanks for checking it out.

  • @JDMHaze
    @JDMHaze 4 ปีที่แล้ว +4

    better lotion up them knees boi!!!lol. nice video, and nice angles good quality

    • @AndyTheXTech
      @AndyTheXTech  4 ปีที่แล้ว +1

      🤣 Ha ha!!! Thanks Dude! 👍

  • @AngelGonzalez-ip3cr
    @AngelGonzalez-ip3cr 7 หลายเดือนก่อน

    I installed a 2-inch lift kit and 285/70/18 tires on my 2022 Toyota Tundra SR5, and when I started it, many warning lights came on the dashboard with disabled functions like ABS, brake... What could be the issue?

  • @eagleclaw2144
    @eagleclaw2144 2 ปีที่แล้ว +1

    I had a leveling kit installed at the same time i got A/T tires and now im looking to take it off to put on highway tires again. Im curious to know why you took off the lower control arm? Im just looking to have a bigger understanding of whats going to happen when i take it to get the levelin spacer removed...

    • @AndyTheXTech
      @AndyTheXTech  2 ปีที่แล้ว

      It makes it significantly easier to get the spring and shock (strut) out. You might be able to pry it down but it’s not gonna be easy. Doing it the way I did it I didn’t have to struggle too much.

  • @gersonmorales6285
    @gersonmorales6285 ปีที่แล้ว +1

    Question. I’ve seen reviews on this type of spacers of customers saying they’re not made for 4x4 tundras because they rub on the frame. What’s your input?

    • @AndyTheXTech
      @AndyTheXTech  ปีที่แล้ว

      This one is a a 4x4 and it doesn’t rub

  • @burkybeareify
    @burkybeareify 10 หลายเดือนก่อน +1

    @ 2:06 in the video I noticed a weld crack at the front sway bar bracket

    • @AndyTheXTech
      @AndyTheXTech  10 หลายเดือนก่อน

      Ya I see that. Toyota quality 😂
      I’ll take a look at in person.
      Thanks. 👍

  • @conorrr6114
    @conorrr6114 4 ปีที่แล้ว +4

    Hi uncle andy!!

    • @AndyTheXTech
      @AndyTheXTech  4 ปีที่แล้ว

      Hi Super Conor! 😁👍

  • @CH-sw1xo
    @CH-sw1xo ปีที่แล้ว

    Did you get a wobble after the install? I did a 1.75” from RC and even after an alignment my wheel wobbles quite a bit around 50-65mph.

  • @oscardenogean
    @oscardenogean 4 ปีที่แล้ว +3

    Nice video, what leveling kit was it you got? Thanks.

    • @AndyTheXTech
      @AndyTheXTech  4 ปีที่แล้ว +3

      KSP Performance 2in front lift kit. (Strut spacer leveling kit) thank you for checking it out.

  • @cattoc
    @cattoc 3 ปีที่แล้ว +1

    Also, why do you have jackstands but use wood blocks?

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว

      Wood block is for safety incase. You can always use the tire.

  • @dhsw41800
    @dhsw41800 2 ปีที่แล้ว +1

    Nice video. I really want to do this but I’ve read on tundra forums that front end leveling kits will wear out the suspension component over time. Therefore, it’s better to do a full coilover lift which is too pricey for me. What do you say about? Like I said, I really want to do this but not if I’m going have to start replacing front suspension part because of it.

    • @AndyTheXTech
      @AndyTheXTech  2 ปีที่แล้ว +1

      I mean as long as you do it just like I did it in the video you should be OK. I think they’re talking about lower control arm bushings if you did not loosen up the bolts that can put extra stress on the bushings. Then also if you get too high the front CV joints can I wear faster. But so far so good on this truck it’s been over a year. Good luck. 👍

    • @dhsw41800
      @dhsw41800 2 ปีที่แล้ว +1

      @@AndyTheXTech Thanks much. I think this will be a project for me as soon as the weather gets warmer.

    • @dougmccloud3703
      @dougmccloud3703 2 ปีที่แล้ว +2

      I've had a level kit installed since I drove mine new off the lot in 2014 (dealer installed) and now at 130k miles with never having a suspension problem (actually never had any problem at all with the entire truck). Got the 1794 so TRD wasn't an option for that trim so it just has the standard factory shocks, not the Bilstein. And I'm just now replacing the shocks this weekend for the first time.

    • @AndyTheXTech
      @AndyTheXTech  2 ปีที่แล้ว

      @@dougmccloud3703 Awesome! 👍 they are great trucks!

  • @movedownsouthfilms936
    @movedownsouthfilms936 2 ปีที่แล้ว +1

    Thanks man

  • @drumlordzmedia5718
    @drumlordzmedia5718 4 ปีที่แล้ว +2

    I think im going with the kps 3/2 on my 2007 limited with 33 12.50r22 do u think they will fit

    • @AndyTheXTech
      @AndyTheXTech  4 ปีที่แล้ว +1

      That’s sounds Awesome! I’m not sure if they’ll fit or not. I would think they would fit but they might rub when making tight turns. Thanks for checking it out.

  • @guillermoardon1172
    @guillermoardon1172 ปีที่แล้ว +1

    Im doing 3 inches in front and 2 inches in the back

    • @AndyTheXTech
      @AndyTheXTech  ปีที่แล้ว

      Sounds good. I did a 6” lift kit on a RAM by rough country little more involved than a leveling kit, but in the end, the truck rides great. th-cam.com/video/Flc17QXCe20/w-d-xo.html

  • @hondaonbkt
    @hondaonbkt 4 ปีที่แล้ว +2

    What size lvl kit

    • @AndyTheXTech
      @AndyTheXTech  4 ปีที่แล้ว +1

      2 in it was pretty easy and definitely makes a difference. Thanks for checking out the video.

  • @adambober1230
    @adambober1230 4 ปีที่แล้ว +3

    Polska Power!!!
    Dobra robota ;)

    • @AndyTheXTech
      @AndyTheXTech  4 ปีที่แล้ว

      Ha ha thank you! 😁👍

  • @kwesty1
    @kwesty1 3 ปีที่แล้ว +2

    Have you upgraded the tires and or wheels, and if so what size tires are you now running?

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว +1

      Nope it’s still has stock tires and rims on it. It doesn’t look too bad but could definitely look better with slightly bigger tires and some sick wheels.

    • @kwesty1
      @kwesty1 3 ปีที่แล้ว +1

      @@AndyTheXTech Right on! Thanks. I have a 2017 Limited TRD, thinking of doing same thing. I appreciate your video and feedback.

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว +1

      @@kwesty1 Absolutely I would recommend it. Subtle but definitely makes the truck look better. And it’s a pretty cheap upgrade and easy to do. 👍

  • @No--0--Spin
    @No--0--Spin 2 ปีที่แล้ว +1

    I have a 2018 as well and would like to just lift/raise the front 1 inch...would the 1 inch spacers/blocks do that? reason I am asking, I am reading that a 1inch kit actually raises it 2 inches. I am not sure how or it doesnt even make sense to me but I see it online on a couple of threads. Thanks in advance

    • @AndyTheXTech
      @AndyTheXTech  2 ปีที่แล้ว +1

      Yes this is confusing. The thickness of the spacer you want needs to be about .5 - .7 in thick to get 1 in. It’s about the angles. I should do a video on this. I was looking for a 1in kit for you and it’s hard to find. I hope this helps.

    • @johngalt2931
      @johngalt2931 ปีที่แล้ว

      Coachbuilder makes a 1” lift spacer that actually measures .50”.

  • @antoniodaehler4673
    @antoniodaehler4673 4 ปีที่แล้ว +3

    How many inches in the leveling kit?

    • @AndyTheXTech
      @AndyTheXTech  4 ปีที่แล้ว

      2 inches. Thanks for checking it out.

  • @notrnchs1623
    @notrnchs1623 3 หลายเดือนก่อน +1

    Why is the purchase link for a Tacoma tho?

    • @AndyTheXTech
      @AndyTheXTech  3 หลายเดือนก่อน +1

      Maybe the part changed I’ll see if I can update it

    • @AndyTheXTech
      @AndyTheXTech  3 หลายเดือนก่อน +1

      Thank you for letting me know

    • @notrnchs1623
      @notrnchs1623 3 หลายเดือนก่อน

      @@AndyTheXTech That makes sense. You're welcome

  • @robinstewart6510
    @robinstewart6510 3 ปีที่แล้ว +1

    Okay, other than cosmetics, what's the benefit of raising the front, a.k.a leveling the truck front to rear? Since virtually all vehicles, from small cars to large trucks, have the front lower than the rear, surely there's a reason for that.

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว

      Like you said it’s pretty much strictly cosmetic. Gives you a little bit more room if you wanted to add bigger tires. I was a skeptic before doing this. It did actually makes the truck feel bigger. Good question. Thanks for checking it out.

    • @baine5.7
      @baine5.7 2 ปีที่แล้ว

      On my tundra I did 2 an half or so on front an 1 an 1/2 inch block on the rear an it looks nice barley any rake .

    • @enlightenthis3749
      @enlightenthis3749 2 ปีที่แล้ว

      The rake ( height difference ) between front and back. Is beneficial when towing etc. Looking at doing with my Tundra. Did you notice any change in ride? I see leveling kits . Looking for red. On eBay for $35 with new bolts and others for $199. I assume it's the metal content. Billet Aluminium or like to steel etc. Thoughts? Old days they used to use hockey pucks for lift. Any problems with suspension after installing?

  • @Cruz0604
    @Cruz0604 3 ปีที่แล้ว +2

    Why you un lot the lower control arm?

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว +2

      Now like every job there’s always other ways to do it. The way I did it in this video was very easy. If you did it a different way it would probably still work but you may have to fight a little more. I didn’t have to fight at all everything went smooth. Thanks for checking it out.

    • @Cruz0604
      @Cruz0604 3 ปีที่แล้ว +1

      @@AndyTheXTech yea I see that it was smoothly done,

  • @Luis-xe9yn
    @Luis-xe9yn 3 ปีที่แล้ว +2

    Did you use a torque wrench for this job ?

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว

      Yeah I didn’t showed in the video but once the vehicle was on the ground I torqued the lower Cam bolts and the wheels It’s hard to fit the torque wrench above the shock. But not impossible.

  • @alexseals1045
    @alexseals1045 ปีที่แล้ว +1

    I might’ve missed it but what size tires are you running?

  • @TheNutty0101
    @TheNutty0101 3 ปีที่แล้ว +2

    Dose that affect towing?

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว +1

      I don’t think so. In this same truck I did a rear suspension upgrade also witch helps. I did a video on that also. The owner of the truck tows a big camper. He hasn’t had any problems with.

  • @OscarRamos-ql4io
    @OscarRamos-ql4io 2 ปีที่แล้ว +1

    About what is the cost for all this work done? I don’t know how to do this. 😅

    • @AndyTheXTech
      @AndyTheXTech  2 ปีที่แล้ว

      It depends how much labor some one charges. The parts are not expensive. I would say About $500 - $700 installed with an alignment.

  • @andresgil2293
    @andresgil2293 3 ปีที่แล้ว +2

    Hi. I have a Toyota Tundra and I want to raise it, how do I get that kit?

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว

      Awesome. You can get it on Amazon “KSP performance” just make sure you get the correct one for your truck. The one I used was a 2inch. Good luck thanks for checking it out.

  • @kevinmorley6300
    @kevinmorley6300 3 ปีที่แล้ว +1

    3:20. What’s that your doing with the lower shock and the bar ?

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว +1

      Because of the mounting bolts on the adapter are offset about 15° from where the original studs would go you have to twist the shock. it says to do this in the directions. This is why I showed in in the video I thought it was a little weird also. But it worked out. If you’re struggling with it you can always get a longer pipe. Thanks for asking good question. 👍

    • @kevinmorley6300
      @kevinmorley6300 3 ปีที่แล้ว +1

      @@AndyTheXTech Ah that makes sense, Cheers, mate.

  • @tonybologna139
    @tonybologna139 11 หลายเดือนก่อน +1

    Is there a certain brand that you recommend?

    • @AndyTheXTech
      @AndyTheXTech  11 หลายเดือนก่อน

      The one that is linked it the description works good.

  • @aaronymousunlimited2661
    @aaronymousunlimited2661 2 ปีที่แล้ว

    Did this and got an alignment. There wasnt enough adjustment for correct camber. Im wearing the outsides of my tires fast.

    • @AndyTheXTech
      @AndyTheXTech  2 ปีที่แล้ว

      Did you go with the 2 inch lift? I wouldn’t think it should be that far off. Were the cam bolts just frozen and they couldn’t get it within spec?

    • @aaronymousunlimited2661
      @aaronymousunlimited2661 2 ปีที่แล้ว

      @@AndyTheXTech yes. 2 inch. 1.75 spacer. The cam bolts were frozen, but i freed them prior to the alignment. Madness. Now I'm thinking wheel spacers and upper control arms.

    • @AndyTheXTech
      @AndyTheXTech  2 ปีที่แล้ว

      Hmm I personally would find a shop that has an alignment specialist, not just a tire shop. Some one can get that thing lined up mint or tell you what you need. You can email me the specks at andythextech@gmail.com I might be able to see something they didn’t.

  • @raydeleon2554
    @raydeleon2554 3 ปีที่แล้ว +1

    I have a 2017. Debating on 2 or 2.5 inch lift.. need help!

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว +1

      I would go 2in. You could measure the difference between the front wheel well and the back wheel well. If it’s more than 3 inches then go with the 2.5.

  • @jeramycaraballo9707
    @jeramycaraballo9707 3 ปีที่แล้ว +1

    Do you dont hace any problem to the alignment?

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว +1

      The alignment went well. The truck still rides great. The tires are not showing any abnormal wear. 👍

    • @jeramycaraballo9707
      @jeramycaraballo9707 3 ปีที่แล้ว +1

      @@AndyTheXTech nice.. In a few weeks I will upgrade the tires and install a 2.5 leveling kit ...And I had that doubt .. Thanks for the info..

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว

      @@jeramycaraballo9707 no problem👍 good luck.

  • @blackwolf1987ks
    @blackwolf1987ks 3 ปีที่แล้ว +3

    Did it lower your mpg?

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว

      I just asked the owner of the truck. He said he didn’t notice any change. I’m sure there is a slight change but I t’s probably minimal.

    • @blackwolf1987ks
      @blackwolf1987ks 3 ปีที่แล้ว +1

      Thanks for the reply became a sub to your channel

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว

      Thanks for the support I appreciate it.

  • @vinnym1210
    @vinnym1210 3 ปีที่แล้ว +1

    Did you have to get an alignment after this?

    • @vinnym1210
      @vinnym1210 3 ปีที่แล้ว

      And definitely subscribing to your channel!!

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว

      Yes got an alignment done after. Thanks for subscribing and checking out the video. 😁👍

  • @luar2521
    @luar2521 9 หลายเดือนก่อน

    That leveling kit is not compatible with 2021 tundra that’s why you had to use pry bar and force turn the shock… that makes the installation harder and I’m not sure if is the correct thing to do… pain in the neck…

  • @Wingertfam05
    @Wingertfam05 4 ปีที่แล้ว +2

    what kit did you use? Great video.

    • @AndyTheXTech
      @AndyTheXTech  4 ปีที่แล้ว

      KSP performance. It’s a 2in leveling kit. Thank you.

  • @RoFlo.
    @RoFlo. 3 ปีที่แล้ว +1

    Any torquing done?

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว

      Yes. You can find most of the torque specs on line. Thanks for checking out the video.

  • @AutoFixYT
    @AutoFixYT 4 ปีที่แล้ว +8

    5:47 hahahahaha nice

    • @AutoFixYT
      @AutoFixYT 4 ปีที่แล้ว +2

      Awesome job btw!

    • @AndyTheXTech
      @AndyTheXTech  4 ปีที่แล้ว +1

      Ha ha 🤣 you caught that. Thanks Dude!

  • @gloryland59
    @gloryland59 3 ปีที่แล้ว +1

    Since its just a spacer on top of the shock, could one just remove the shock and go from there?

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว +1

      Well you’re gonna have to remove the whole assembly to remove the shock. Then you would need a spring compressor to compress the Spring. So I think the way I did it is realistically the easiest way to do this job. You can try to cut some corners but I think you’re going to struggle. Thanks for checking it out.

  • @graysonsheridan1593
    @graysonsheridan1593 3 ปีที่แล้ว +2

    You seriously need to learn how to read a tape measure.... other than that... spot on.

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว

      Ha ha I’ve been waiting for this comment since I posted the video. Thank you. 👍

  • @sdbassin1143
    @sdbassin1143 3 ปีที่แล้ว +2

    🔥🤘💪 Badass

  • @oscarsingh4662
    @oscarsingh4662 3 ปีที่แล้ว +1

    Is that the 1.75" level kit?

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว

      No this was the 2” . If your interested there is a link in the description for the parts in the video. Thanks for checking out the video.

    • @oscarsingh4662
      @oscarsingh4662 3 ปีที่แล้ว +1

      @@AndyTheXTech Looking to get the leveling dome on my 2017 Tundra. Got a quote from Big O tires for 550 for 1.75" rough country brand. Have no idea about brands or anything . What are the best brands for leveling kits? Is that a fair or high on pricing if paying to get it done. Is a 1" in back 3" front better? Toyota quoted me 1500 for the 3 on front 1 on back

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว

      I mean that’s about accurate. Rough country is quality stuff. I’ve installed some of their other products on a RAM videos in my channel if you’re interested. But that’s not too far off with the $550. It’s about $300 to $400 in labor plus the parts plus an alignment. That’s just for the front leveling kit. If you add the rear it’s probably another $150-$200 in labor. This would be my prices based on a $120 labor rate. I hope this gives you a rough idea. If you have any other questions I’d be happy to answer.

  • @ChrisB10
    @ChrisB10 ปีที่แล้ว +1

    Are you the 1A dude ?

  • @billydesantis3093
    @billydesantis3093 3 ปีที่แล้ว +1

    Any issues since then?

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว

      Nothing so far . Still rides great. Thanks for checking it out.

    • @billydesantis3093
      @billydesantis3093 3 ปีที่แล้ว

      @@AndyTheXTech would you suggest spacers?

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว

      Wheel spacers? I would say it depends on the look your going for. And if you have bigger tires.

    • @billydesantis3093
      @billydesantis3093 3 ปีที่แล้ว

      @@AndyTheXTech no the leveling kit spacers.

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว

      @@billydesantis3093 I’m still not sure. Reply with a link to the part your talking about. Or you can email me at : andythextech@gmail.com

  • @jameshovey8301
    @jameshovey8301 3 ปีที่แล้ว +1

    I have always wondered.... why wouldn't the engineers at Toyota just design the truck to be level so it left the factory that way?

    • @AndyTheXTech
      @AndyTheXTech  3 ปีที่แล้ว

      I personally believe the reason why trucks seem like they’re so raised up in the back is because they assume you’re going to put heavy weight in the back and then they don’t want it to look like it’s sagging in the back. So just drive around with a couple engine blocks in the back then it will be level. 🤣

  • @tatyana9692
    @tatyana9692 2 หลายเดือนก่อน +1

    What's up with stupid annoying elevator music?!?

  • @chadstewart9999
    @chadstewart9999 2 ปีที่แล้ว +1

    Can you do mine? I'll pay

    • @AndyTheXTech
      @AndyTheXTech  2 ปีที่แล้ว

      Ya I could do it. Where do you live?

  • @cattoc
    @cattoc 3 ปีที่แล้ว +1

    Torque to spec?
    Naahhhhh, 5 UggaDuggas

  • @mattdaniel2395
    @mattdaniel2395 4 หลายเดือนก่อน

    Was this a 2 inch ir 2.5?