TOYOTA HILUX FRONT WHEEL BEARING

Information on Bearing and hub assembly replacement on a KUN26R Hilux these will come assembled ready to bolt on the same as we provide the Prado ones. Some fitting info snippets included. Changing drive shaft seal to protect the bearing. How to change the seal.

[@LapsofMaps]

Mate, you're an absolute legend for sharing all this knowledge on the Hilux 3.0L motors. We watch many of your videos. Appreciate all the time and effort that is put into this. Cheers!!

[@richardperry4115]

Ant
Thanks for all your hilux vids, only trouble is I can’t stop watching them .
Cheers mate .
Rich UK .

[@Problems-qp2ud]

I own a Hilux Vigo KUN25 convert to 2KDFTV 2.5cc (2009) Auto
There was sound like bearing i suspect from wheel bearings.
Its a little hard to confirm which side

[@argiekargie69]

Mate love your vids !

[@00emil8]

Why don`t they need to be greesed up like cone bearings before installing? Where do they get there lubrication while driving?

[@boosted4runner86]

Wondering if anyone has come up with a solution to change from auto locking which is basically always locked to manual locking hubs?

[@Mister_Read]

Hi mate, what's the diameter of both the seals on the inner and outer face of the hub/bearing?

[@wazir22]

Hi Anthony
I have got Toyota surf 1998
The bearing won't come off after taking 4 screws and the drive axle nut. Is that something different?
How much both cost to buy them. I am in Melbourne

[@michaelgalimi1862]

Fantastic video do you have one on hilux ggn15r 2wd front wheel bearing?

[@doug1381]

Did you find a vid

[@REVIEW_JUJUR]

*Hi Anthony, i have a question... Why only Toyota Diesel has Butterfly Valve, many diesel car suffer from run away. I believe if every diesel car has BV in their THrottle Body, it cant run away.*

[@addisonburn8508]

It's for the EGR, could possibly help prevent a runaway but that's not its main purpose.

[@saimoniq.rtuinamata8761]

Rattling sound comming from front right wheel whe it hits pothole. What could be the issue?..

[@bigal5932]

If you can’t find any play in the suspension. It could be your brake pads rattling. Try lightly applying the brakes and drive over said potholes. You may find this stops the rattle.

[@flynnstarkey5002]

How did you get the cv/drive shaft out of the housing to allow you to get that seal out ????

[@Aviduduskar]

First video in the Front Wheel Bearing playlist shows it - disconnect the sway bar.

[@Problems-qp2ud]

Last time i changed my drive shaft, yeah a little mess lol not as easy as normal car
You need to disconnect every obstacle that preventing you from pulling the drive shaft. Leave the lower arm except you want to change the lower ball joint.

[@waltersiziba3975]

Why my one is breaking bearings if you put a new one there's a play

[@MrDerpunborn]

Your knuckle or wheel hub may be worn.

[@travissim8214]

Hey mate does the big hub nut have torque setting

[@Fourby4Diesel]

235nm

[@jonmusgrove2134]

I wish you were in UK - you're probably glad you're not.