I really appreciate your videos... Do you still think that KWC Airguns are the best? I remember like 15 years ago, when my kwc Desert eagle was the best you could get. Now you can't get it anymore. Do you think that made in taiwan is still better than made in china? Which airsoft spring pistol had the best performance and which one lasted the longest? To give something back i'd like to share my experience. The best looking, strongest and most accurate 1911 i ever owned was the browning 1911 airsoft. her main flaw being her slide catch, a 0,8mm plastic hook, breaking the wohle gun because it´s also the disassembly button. With every shot it became loose until the gun lost it. You need it to catch the slide manually. if you do so for 3 times it will break. After that the gun becomes useless... The best and cheapest 1911 you can get as a spring pistol ist the gsg 1911. It is way underrated... every essential part is metal in this gun and more. Every function of a real gun is implemented. Every button has its original function. The weight is about 20 percent below a real 1911. It´s the heaviest 1911 airsoft i know. 2.a.m. could write more, but just try it!
Thanks! :) I cant say any opinion about KWC pistols, because I only have one, and thats only a spring type pistol. I have no clue about gas powered pistols sadly. Taiwan-made guns are better, in quality. About the spring pistols, they are cheap, so even 2 same spring pistols from the same brand can be different in performance and reliability. I never heard about it. I searced gsg 1911 in the youtube, but no assembly videos on it. Im really curios about the metal inside parts.
Hello good Sunday, great video I subscribed for a long time and it's always nice to see your new videos I wanted to ask you but where do you buy the spring that you change??? Thank you
Thanks, and you too! Check the link please! airsoftpro.cz/en/gun-parts-upgrade/sniper-rifles-parts/springs-for-rifles/9mm-upgrade-pruzina-pro-odstrelovaci-pusky-m130-430-fps-detail I bought them from here, then I cut them to the perfect size. 1 spring is enough for 2 pistols. (or if you want a bit more power, choose the m140) Without trigger sear upgrade, please, dont use them or only on your own risk!
Hi, i want to buy this pistol but am curious about the quality. I see the trigger and some internal parts are plastic and was wondering if they are durable. I intend on using the gun a lot. Would you recommend it?
Hi! In this category, its a good springer. Inside mechanism is plastic, as you saw. For heavy usage, I can't reccommend because plastic is plastic, it will wear out fast. (maybe after 3-4000 shots, or a bit more if you grease the sears regularly) But... In my channel, you can find "trigger sear upgrade" video. If you can do that, lifetime will increase. I can give you a link if you need.
@@airsoftvseverything Thanks, i have already found the upgrade videos and will be ordering this pistol shortly. I asked because my previous pistol was from hfc and the trigger sear was plastic... so it broke after about 4000 shots which is fair.
Hi. Can I ask for the details for the upgraded spring? Dimensions: d (wire diameter) * D (outer diameter) * l (length) Need it badly brother. Thanks for the video! Still not losing hope for my 180fps springer. so bad..
Hi! Sure. Outside diameter: 11,75mm Inside diameter: 8,7mm Lenght: 65,5mm Wire thickness: 1,55mm (With this spring dimensions, you need to modify the piston by making the inside diameter a bit bigger) Or you have a second option if you are from Europe. Buy a 7mm M140 sniper spring from airsoftpro.cz. (With this spring dimensions, you need to modify the plastic spring guide to smaller diameter) For both spring, I highly recommend upgarding the trigger sear and piston nub. (I have video on my channel)
@@polperez-t3z Same cost as the 1911, 35-37 Euro. Yes, its already upgraded, because I upgraded it. Only few parts are metal, the slide and few inside parts. Others are plastic (abs)
Hi! airsoftpro.hu/hu/potalkatreszek-fegyverekhez/a-mesterlovesz-puskanak-reszei/a-mesterlovesz-puskainak-rugoi/7mm-upgrade-pruzina-pro-pusky-m140-460-fps-detail You need to cut it, because its a sniper spring!!!
I added another spring, same lenght, a bit smaller diameter than the stock one, but the piston wont load into the sear, its like the sear gets set off early because of someting and i dont know why. what could be the cause?
When you pull up the pistol, theres an upwards force in the system which pushes up the end of the piston a bit. If the spring is smaller in diameter, it can cause the problem, because now the piston "nub" is in a bit higher position than with the original spring! So it can't reach the trigger sear correctly. You can fix this problem if you glue the same thickness of "anything" inside the piston, that which thickness you lost with the new spring. or... The new spring wire is thicker than the old one and you may can't press the spring that much than the original one. That's why sear can't catch the piston correctly. (1-2mm of spring route is missing?) Hard to tell you the correct answer/fix without seeing and feeling the problem.. Im just guessing right now. I hope, my answer is understandable with my crappy english.
Thank you! Sadly, I cant give you link because its out of stock. But Im using airsoftpro m135 (or m140) 7mm tuning spring (you need to cut the spring because its for snipers)
Ciao seguo il tuo canale complimenti, ho appena ordinato la molla che hai detto tu, mi dici perfavore quanto va tagliata in centimetri? Deve essere uguale in lunghezza a quella Originale?
Ciao grazie della risposta... Ma se la taglio 70 o 75 mm cioè un po' più lunga, non dovrebbe avere più propulsione? O ci sono problemi nel rimontaggio della pistola?
@@andreamassimo819 You will not be able to cock the pistol if you cut the spring that long. Spring have a limited space inside the piston when its compressed.
I got it from airsoftpro.cz but now its out of stock. Only M150-160 spring is available. These springs are "7mm airsoftpro sniper springs", so you need to cut them
I don't know where you live so it's easier if you write the pistol name to the internet and you will find the best shop for you. Pistol name is: "Umarex Beretta M92 FS" (spring pistol, metal slide)
![FPS Upgrade on Airsoft Colt 1911 A1 Spring Pistol [Penetration Test and Assembly]](http://i.ytimg.com/vi/jNlzufPQZGw/mqdefault.jpg)
![FPS Upgrade on Airsoft Colt 1911 A1 Spring Pistol [Penetration Test and Assembly]](/img/tr.png)
![[Sub Thai] APT. - ROSÉ & Bruno Mars](http://i.ytimg.com/vi/bYjhzP8x_uc/mqdefault.jpg)
For more information, please, check video description!
Can you make video for k117d beretta upgrade?
@@haroldmedrano1950 I dont have that pistol sorry.
Que presio la pistola
Que presio
@@EinerQuinayasomen-k8t ?
Thanks for the video.. we need more videos like this, it was pure ASMR and educational in one.
Thank you! :) I have few more videos on my channel like this.
superb video quality and excellent explanations, keep it up my friend
Thank you :)
Its really nice i got the tan one its my first airsoft gun i do recommend for beginners
I really appreciate your videos... Do you still think that KWC Airguns are the best?
I remember like 15 years ago, when my kwc Desert eagle was the best you could get. Now you can't get it anymore. Do you think that made in taiwan is still better than made in china? Which airsoft spring pistol had the best performance and which one lasted the longest?
To give something back i'd like to share my experience.
The best looking, strongest and most accurate 1911 i ever owned was the browning 1911 airsoft. her main flaw being her slide catch, a 0,8mm plastic hook, breaking the wohle gun because it´s also the disassembly button. With every shot it became loose until the gun lost it. You need it to catch the slide manually. if you do so for 3 times it will break.
After that the gun becomes useless...
The best and cheapest 1911 you can get as a spring pistol ist the gsg 1911. It is way underrated... every essential part is metal in this gun and more. Every function of a real gun is implemented. Every button has its original function. The weight is about 20 percent below a real 1911. It´s the heaviest 1911 airsoft i know. 2.a.m. could write more, but just try it!
Thanks! :) I cant say any opinion about KWC pistols, because I only have one, and thats only a spring type pistol. I have no clue about gas powered pistols sadly.
Taiwan-made guns are better, in quality.
About the spring pistols, they are cheap, so even 2 same spring pistols from the same brand can be different in performance and reliability.
I never heard about it. I searced gsg 1911 in the youtube, but no assembly videos on it. Im really curios about the metal inside parts.
Awesome. Thanks, bro.
@@nookcyan I'm glad you like it! Thanks!
Hello good Sunday,
great video I subscribed for a long time and it's always nice to see your new videos
I wanted to ask you but where do you buy the spring that you change???
Thank you
Thanks, and you too!
Check the link please!
airsoftpro.cz/en/gun-parts-upgrade/sniper-rifles-parts/springs-for-rifles/9mm-upgrade-pruzina-pro-odstrelovaci-pusky-m130-430-fps-detail
I bought them from here, then I cut them to the perfect size. 1 spring is enough for 2 pistols.
(or if you want a bit more power, choose the m140)
Without trigger sear upgrade, please, dont use them or only on your own risk!
@@airsoftvseverything where did you buy the pistol from and do they ship internationally?
@@solymiller659 Catus.sk (and I dont know, check them out)
@@airsoftvseverything can you link the trigger sear upgrade please?
@@tvr3937 Thats a homemade upgrade, you can find the video on my channel
Wow new unit 😍did you put oring on the piston seal?
I dont remember, I think, no, seal was ok if Im correct. I made this video in the end of november.
YEEEE U FINALLY GOT A BERRETA BRO I GOT THE SAME BUT ITS ONLY 100 FPS mines from HFC THO
100fps? 🤔 That is not much. Even my small colt 25 has more power.
Can you make a video for k117d beretta upgrade?
can u pls make a video { hot to upgrade a fps on beretta m92 fs spring}
Please check my colt 1911 a1 upgrade video on my channel. Beretta is similar.
Hi, i want to buy this pistol but am curious about the quality. I see the trigger and some internal parts are plastic and was wondering if they are durable. I intend on using the gun a lot. Would you recommend it?
Hi! In this category, its a good springer. Inside mechanism is plastic, as you saw. For heavy usage, I can't reccommend because plastic is plastic, it will wear out fast. (maybe after 3-4000 shots, or a bit more if you grease the sears regularly)
But... In my channel, you can find "trigger sear upgrade" video. If you can do that, lifetime will increase. I can give you a link if you need.
@@airsoftvseverything Thanks, i have already found the upgrade videos and will be ordering this pistol shortly. I asked because my previous pistol was from hfc and the trigger sear was plastic... so it broke after about 4000 shots which is fair.
@@charis.s Did you get the gun and is Everything working good?
Everything is still fine.
How much? Thank you!
30-32$
How can buy like that
Can you explain the ‘piston sear’ upgrade? Does this need to be done before the spring replacement?
@@vanbeurdenbluesandguitars1958 Yeah, it's quite necessary, without it, the plastic sear will worn out or break fast.
@@vanbeurdenbluesandguitars1958
For the piston sear and trigger sear upgrade, please, check this video.
th-cam.com/video/MrbooCU-j3g/w-d-xo.html
Hi. Can I ask for the details for the upgraded spring?
Dimensions: d (wire diameter) * D (outer diameter) * l (length)
Need it badly brother. Thanks for the video! Still not losing hope for my 180fps springer. so bad..
Hi! Sure.
Outside diameter: 11,75mm
Inside diameter: 8,7mm
Lenght: 65,5mm
Wire thickness: 1,55mm
(With this spring dimensions, you need to modify the piston by making the inside diameter a bit bigger)
Or you have a second option if you are from Europe. Buy a 7mm M140 sniper spring from airsoftpro.cz.
(With this spring dimensions, you need to modify the plastic spring guide to smaller diameter)
For both spring, I highly recommend upgarding the trigger sear and piston nub. (I have video on my channel)
@@airsoftvseverything thank you brother! ❤️❤️
@@jetamiemaster You're welcome!
I want to buy. Where can I buy this? Do you sell online?
Im not a seller. I bought it in catus.sk
සුබ ❤❤❤
Thanks! :)
Hello, is the metal slide version not supposed to weight 635g?
Hi! I measured it and its 531g 💁 (Metal slide version)
Hello boss, where i can find the upgrade kit for my beretta?
Hi! What upgrade kit? This is a homemade upgrade what you saw in the video.
Where did you buy the spring?
airsoftpro.cz
How much this cost sir, its also upgraded, ? And full metal, ? Sir
@@polperez-t3z In English, please.
@@polperez-t3z Same cost as the 1911, 35-37 Euro. Yes, its already upgraded, because I upgraded it.
Only few parts are metal, the slide and few inside parts. Others are plastic (abs)
@@airsoftvseverything how much that sir in Philippine money, ? .
But this upgrade only concerns the change of the spring??? and it can also be done on the M) spring of the asg??? thanks
No, I upgraded the trigger sears too, I just quickly showed it in the video.
@@airsoftvseverything ok thanks
Ciao dove si trova la molla
Hi!
airsoftpro.hu/hu/potalkatreszek-fegyverekhez/a-mesterlovesz-puskanak-reszei/a-mesterlovesz-puskainak-rugoi/7mm-upgrade-pruzina-pro-pusky-m140-460-fps-detail
You need to cut it, because its a sniper spring!!!
I added another spring, same lenght, a bit smaller diameter than the stock one, but the piston wont load into the sear, its like the sear gets set off early because of someting and i dont know why. what could be the cause?
When you pull up the pistol, theres an upwards force in the system which pushes up the end of the piston a bit. If the spring is smaller in diameter, it can cause the problem, because now the piston "nub" is in a bit higher position than with the original spring! So it can't reach the trigger sear correctly.
You can fix this problem if you glue the same thickness of "anything" inside the piston, that which thickness you lost with the new spring.
or...
The new spring wire is thicker than the old one and you may can't press the spring that much than the original one. That's why sear can't catch the piston correctly. (1-2mm of spring route is missing?)
Hard to tell you the correct answer/fix without seeing and feeling the problem.. Im just guessing right now.
I hope, my answer is understandable with my crappy english.
@@airsoftvseverything thats a great answer man thanks a lot, i will check these variables when i have time and will text back.
Belle vidéo.👍 Ou le peux trouver ces ressorts. Pouvez vous me mettre un lien pour l acheter?
Merci.😉
Thank you!
Sadly, I cant give you link because its out of stock.
But Im using airsoftpro m135 (or m140) 7mm tuning spring (you need to cut the spring because its for snipers)
Where can I get the spring?
I bought it in airsoftpro.cz
what is the diameter of the tuning springs?

@@benassob
outside diameter: 11,4mm
inside diameter: 8mm
wire thickness: 1,6mm
I like Beretta m92 you have my..and can i buy you.. Beretta..how much Philippine money
Its only available in Europe, in your country not.
Around 30 Euro, convert it to your currency.
What the name of store..
@@jonathanmamangon6378
www.catus-airsoft.eu/airsoft-pistol-manualna-beretta-m92-fs-umarex
Ciao seguo il tuo canale complimenti, ho appena ordinato la molla che hai detto tu, mi dici perfavore quanto va tagliata in centimetri? Deve essere uguale in lunghezza a quella Originale?
Hi!
Need to be around 65,5mm - 66mm long.
Ciao grazie della risposta... Ma se la taglio 70 o 75 mm cioè un po' più lunga, non dovrebbe avere più propulsione? O ci sono problemi nel rimontaggio della pistola?
@@andreamassimo819 You will not be able to cock the pistol if you cut the spring that long. Spring have a limited space inside the piston when its compressed.
Ciao. Dove hai comprato la molla? Grazie.
@@robertoribechi6703 airsoftpro.cz "7mm M140 sniper spring"
Quale molla ha utilizzato?
@@francescocazzolla1920 airsoftpro.cz/en/gun-parts-upgrade/sniper-rifles-parts/springs-for-rifles/9mm-upgrade-pruzina-pro-odstrelovaci-pusky-m130-430-fps-detail
Hi I thought this gun took steel bbs not plastic?
I really want it to shoot plastic because I think steel is too strong but I heard plastic is too big can u tell me?
@@mauka-qx5iv Hi! It's an airsoft gun. You can shoot 6mm plastic bbs with it.
@@airsoftvseverything do u have the link to buy it
@@mauka-qx5iv Easier if you write the pistol name on the internet and find the best shop for you.
(Pistol name is in the title)
How much that beretta?
31 Euro or 34 Dollar
Euro's are worth more than dollars rn
@@airsoftvseverythingpls answer does it have metal trigger
@@ItsNotMicha21 In Hungary, not really. 😏
@@Aero_Ace12 No, it's plastic.
Where can i get the tunning spring?
I got it from airsoftpro.cz but now its out of stock. Only M150-160 spring is available.
These springs are "7mm airsoftpro sniper springs", so you need to cut them
does cocking make it heavier?
A little bit.
(you would definitely feel the difference between the original and tuning spring.)
Shaksa,,, I only have Full Metal SBB CO2 full auto 92 😂😂😂❤
where to order?
As I dont know where you live, easier to write the pistol name on the internet. It will give you the best shop for you.
How to order sir
I don't know where you live so it's easier if you write the pistol name to the internet and you will find the best shop for you.
Pistol name is:
"Umarex Beretta M92 FS" (spring pistol, metal slide)
Hm po beretta
Any of these for sale nz $$$
I dont sell guns. Im not a seller.
m1911 a1 is better
I prefer that too.
Depends!
Both are very good!
My Favourite is the Colt 1911 too!!
Nah it May be better but the looks on that berretta looks better