ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
ต่อไป
เล่นอัตโนมัติ
BOSE Wave Music System Multi CD Changer repair12voltvids
มุมมอง 55K
BOSE Cd changer from hell repair never again12voltvids
มุมมอง 28K
Lady Gaga, Bruno Mars - Die With A Smile (Official Music Video)LadyGagaVEVO
มุมมอง 10M
LISA - NEW WOMAN feat. Rosalía (Official Music Video) reaction [NEW LEVEL!]Captain Korea
มุมมอง 125K
🔴LIVE เชียร์สด : อิปสวิช ทาวน์ พบ ลิเวอร์พูล | หงส์แดงบุกรังม้าขาว นัดเปิดฤดูกาลGOTJISIRI CH
มุมมอง 308K
ไฮไลท์ฟุตบอลพรีเมียร์ลีก 2024/25 สัปดาห์ที่ 1 : อิปสวิช ทาวน์ พบ ลิเวอร์พูลTrueVisionsOfficial
มุมมอง 1.3M
BOSE WAVE II CD LENS CLEANINGThe Specialist
มุมมอง 112K
£600 BOSE WAVE SoundTouch 4 - NO SOUND FAULT - Can I FIX it?My Mate VINCE
มุมมอง 211K
Bose 3 Disc Changer - Disc not spinning. Can this gal fix it? You bet I can :)iRepair iDevices
มุมมอง 3.8K
Repairing A BOSE Wave Radio Alarm ClockBuy it Fix it
มุมมอง 67K
Bose radio cd player AWRCC2 no power please wait wont turns onSOSfix Electronics
มุมมอง 7K
How to fix Bose Wave Radio AWR1-2W humming sound through speakersDARTrader Media Productions
มุมมอง 1.4K
Bose Acoustic Wave CD3000 - CD Chatter and No CD audio outputiRepair iDevices
มุมมอง 13K
Bose Music System Jammed CD12voltvids
มุมมอง 87K
Bose 3 CD changer fix for elevator screw alignment problems12voltvids
มุมมอง 16K
LISA - NEW WOMAN feat. Rosalía (Official Music Video) reaction [NEW LEVEL!]Captain Korea
มุมมอง 125K
EP 315 The Sixth Sense คนเห็นผี : ผีเรียกหลอกให้ขาน Part 2/2อ้าปากค้าง สตูดิโอ
มุมมอง 286K
ทักษะฟุตบอลที่ดีที่สุด 2024/25Aya ALansari _ اية الانصاري
มุมมอง 350K
ONE ลุมพินี 75 Full Fight | 16 ส.ค. 2567 | Ch7HDterodigital
มุมมอง 617K
very valuable information. Thanks for putting this together! These systems, while no longer being made or sold, are still VERY valuable, and worth every penny as an investment. They produce incredible sound, which will always appreciate. Thanks again!
@Eric Stephen Vorm - Thank you for watching my channel and your kind words. Some of my videos are for limited audience as they touch some vintage stuff and only some will know the value. As Bose do not service these any more I thought it will be worth sharing for those how love to listen to true music 🎵 away from the digital age. Please subscribe to my channel for more up coming videos.
I just finished working over my 5-disc player. I got it used online, and it worked for 2 months when suddenly a disc would not play nor would it reject. I worked and worked on it, slowly learning how it came apart and went back together. After about 3 weeks, I had touched just about every part of the machine and reached the point where it is in better condition than it was when I got it. If anything goes wrong with it, unless it's something on a circuit board, I think I'm ready to repair it. This video was very helpful in my process.
I would say, check the sensors and spray contact cleaner on them. Usually its the sensors or the loading assembly.
@@thespecialist786 My comment was intended to tell a success story, but I see how you may have misunderstood. I got the player apparatus balanced and level on the elevator gears and then put the CD selectors in place. Everything has been working perfectly for 24 hours.
@@jimbohnenkamp5082 your the 👨 man!
@@thespecialist786 You do pretty well yourself. I wouldn't have attempted to do what I did without your videos.
Very helpful video, thank you very much. You mentioned another video coming later to show how to align the trays. I am looking forward to that one as well. Thank you for taking your time to help us.
@DaugBiscuit - Really appricaite your kind words. This informtion is very helpful and is will make you repair your system with parts that are no longer available. Please subscribe. I am a little busy but video will come for sure. Stay Tuned!
@@thespecialist786 where can I find that video?
Thanks for the video, I just purchased the main unit which has the fron loading CD. It is.very unstable. Works great sometimes and then not. Can't read the disk at all or can't read all the songs. The 3 CD changer had a CD stuck in it and thrashes around making horrible noises before the disk error message. You mentioned in your video about cleaning the micro switches, but didn't see you do that or did I miss it? Thanks
I'm a retired Bose repair tech, and I used to work on these. Yes, very tricky indeed!
This is not every ones cup of tea.
@@thespecialist786 Yes, one must have skills AND patience to work with these! I was told that I was only one of 5 techs worldwide who could repair these changers! (I once tore a 5-disc CD mechanism down to the LAST screw... And put it back together to win a bet with a co-worker). I may even have some of those gears in my home workshop. I knew the certain gears that would pop a cog, so I saved a bunch! The little black slide gear & that white "double-decker" gear especially!
@@bosetech9661 Very true, I believe now I can also disassemble every gear of this unit and put it together, took a while to master this skill. One thing you can help me, where can I get them and what are the sensors called that sit behind the white loading gear that has a one large notch. This is the micro switch black with two tiny buttons. Can you help me with this information.
@@thespecialist786 I'm not sure which sensor your referring to... Unless you mean the switch board underneath the pcb assembly? Unfortunately, back in the day, when a 3 or 5-disc changer came in for repairs, we would simply replace the entire CD-mechanism. All of the gears and switches within had no part numbers. Only the cd mech had a known part number. When the old-style cd mechs became unavailable, we had no choice but to learn how to repair the internals by trial and error. So I don't know where you would find any individual components inside the cd mech. You would have to improvise with a similar sensor or switch.
@@bosetech9661 Correct that is the part I am talking about. Bose have these made specially for them.
I just lost the washer that holds that plastic gear down 😢 where can I find a replacement?
You need to buy a donor machine
How do you get the bottom off the 5 cd changer. Do you need to force it apart and do you need to remove the tiny screw in the center ledge on the bottom?
Hi, thank you for watching my channel, you need to remove the rubber feet and there are screws under it. Please subscribe to my channel. 👍
This guys a genius, loved the video x
Thank you for much for your kind words. Please subscribe to my channel happy to help you where possible.
Thank you for posting this. I did take mine down to those micro switches and checked their continuity with a meter. I can't remember if I checked that gear but I think I did. It's been a while but I might check it again.
From your great video, we think the micro switch needs to be replaced...we actually have two CD Changers with the exact same problem...are these switches available to purchase anywhere? Thank you!
Sorry, I don’t believe they are easy to aquire, just swap them from your old donor system
Hi there,
I have a the 3000 5cd multi disc changer and I have the correct remote but I don't know how to reset/sync the 2 together 🤔? (Any advice or tips would be most welcome!
Excellent video by the way👌👍🤔
Thank you for your question, I am a little puzzled what do you mean by Sync? The to items work indipendently. How every I am not which 5cd changer you have? If you look at the back on the changer the model should not read Wave Acoustic II. If it does you have to wrong model even if it works. You can not sync the two items. CD on the top works on its own and AUX allows the 5 CD changer to work.
Where do you remove the screws and what type of screwdriver do I need.
Hi very useful Video as I have the same problem exactly can you please advice form where I can buy that gear ( broken one) at the end of your video Manu thanks
Thank you so much for your kind words, please check on Ebay for faulty units and use the parts from them.
Please Subscribe to my channel for more interesting videos.
I have taken "all" 11 screws out of the base of the 5 disc version, still can't get case off! Am I missing something?
@Ian Conn - Thank you so much for watching my channel, please subscribe for more more upcoming videos.
You need to remove the rubber feet and there are screws under the rubber pads.
It has no clips only screws are holding it together. Please do not pull just remove all the correct screws and the top will lift off however be careful as there will be ribbon cables securing the top and bottom half, take a photo with your camera before removing them as they must be put back exactly in the same place and the correct way round. If you have tip ex mark each one to make sure which way round they are inserted.
All the best.
A lot of the time, the rear label is holding onto the bottom panel. It overlaps, and if its stuck good, it can make it appear that there's still a screw holding it together! 😀
I have one I busted my behind repairing it and the disc 4 doesn’t push back and all the others slots any ideas?
Thank you for watching my channel, I have no idea what stage your assembly has been through. You need to look at all the loading clips and make sure they are reset correctly.
@@thespecialist786 its odd. Its doing the normal cycles when it reaches the 4th one it pushes in then when it hits the contact it stays in the in position doesn’t pop back out.
@@thespecialist786 everything is put back together fine and all gears are good
@@thespecialist786 how do you reset the loading clips?
@@bosewaverocks send me few photos of what you have done, I might do a Live stream and talk you through how to fix it at a cost.
Great Video! This dumb people gave 2 thumbs down, a shame of themselves!
@Ram Franc - Thank you for your kind words, Remember a Diamond 💎 is only valuable to the eyes of the beholder and to the rest, its just a stone. I am happy to learn that this has been helpful because I know the value when information is not available. Thank you for your kind words.👍🏻
Hi does the wave 3 with Dab work with the 3 disk multichanger, some say yes some say no only wave 2?
Thanks
Yes, I can confirm Wave III does work with the 3 Disk cd changer but the changer is a special revision. Which is very rare to find as all the changers look the same. The seller should tell you if the changer works with wave III or not.
I just use my external Sony 5 cd Changer In the aux input in the slim line wave system mine won’t even read the cd so I use my Sony 5 cd changer for mine
Very well explained, the problem i'm having is that the mechanism doesn't insert the cd, doesn't read it and doesn't eject it, but power is ok do you have any information to share to help me
Thank you for watching my channel, it seems you loading sensors are gone. Change the two led sensors that are on the housing in the front. They are located on the top of the CD assemble. Clear led sensors. They send the signal to the main processor to do certian actions. When they fail nothing works properly. Good luck.
@@thespecialist786 The radio/cd plays well it's the multi 3 disk i'm having these problem with
I have the Bose 5 CD multi-disc and it's not working fine, once you power on the unit, CD # 5 gets stuck inside and it's not ejecting nor playing and I can't play the other 4 CD, The CD 5 keeps spinning then a message in the middle flashing and says : Please wait >>>> changer , what do you think , what's the problem , If parts is needed , can you recommend a place to get the parts from . Thank you in advance for your help.
Hi, Thank you for posting your question on my channel. The bad news is there are no parts available for your unit. Bose have stop servicing the five disk changer few years ago.
Now to find out what wrong I can tell you. Few of the switch sensors may have gone bad and also the spiral gear which loads the disk assembly may have broken off. All the issues on ur unit is mechinical nothing to with the PCB. You can try to open it but that could make it worse if not done correctly.
I have 2 cds stuck in slot 2
Right Bose won’t repair
They cost 1,600 new
The wave part works fine
Won’t release the 2 discs in one slot!
Any quick tips
Like you said nothing to lose!
Hi, Thank you for your comment, so I understand you have a five disk CD changer?
Where can you purchase parts for these? I have determined that one of the plastic pieces has broken on mine in the loader section. I have a 3 CD changer and trying to determine where I can get the part I need. Thanks. You video was very informative.
Thank you for your kind comments, Please send me a photo of the broken part via email and I will help you locate the part.
Also please Subscribe to my Channel.
I may have the part(s) you need. I used to work on these back in the day, and have many spare gears and misc other parts.
@@bosetech9661 Thanks for the follow up. I was able to glue the piece I needed and it has been working fine.
@@alsenzamici6069 That's great that you were able to glue that piece and get it working again! I know ALL the parts in these changers, and am curious as to which part you were referring to? 🤔😀
nice to know, what about putting parts of the most common problems together for me?@@bosetech9661
It is very difficult for me to fix it. Any Bose repair services in California ?
Thank you for your comments and I agree its not the best of things to open and fix. Bose sadly do not repair these any more so only way to fix them is to buy a doner machine and swap parts.
@@thespecialist786 I once repaired these for customers who shipped them in when I was a bench repair technician at Bose. Yes, they were often not fun to work on... Especially when there were very few new parts to fix them. But after working on a few hundred, I learned many tips and tricks to get em going again!
How did you open the wave II ????? I CANT REMOVE THE PLASTICS
@Daniel Verde - Thank you for watching my channel. The screws are hidden under the rubber feet. You need to remove all x4 of the rubber feet and remove the screws. That will do the trick. Good Luck and please subscribe.
On the 5-disc changer, the hidden screws are only under the front 2 rubber feet. No need to remove the back 2.
Question: I put a cd in my unit and its stuck. Is there a way I can get it out without un assembly? I have a 5 wave cd changer
Hi, Thank you for your comments. Sadly the Five disc changer will have to be taken apart to release the cd’s becase they are usually locked in the chamber.
@@thespecialist786 I tried the credit card w/ tape trick; the butter knife w/ tape trick; the spatula with tape trick and last partially inserting a disc to see if it comes out. I unplugged the cords from its power source in back of the unit. Nothing worked. Finally I unplugged the unit from the wall and it spit out the CD. It was a new CD Charlie Brown Christmas. Got lucky. I guess it was my Christmas gift.
What you do is cool. I learned a lot.
Okay, I have the 5 disc model you show in this video, and it won’t eject the 5 CD’s in it.
How do I get those discs out? Also, what precautions, if any, should I be mindful of while taking this thing apart?
Hi, Taking this apart is not as simple as one would think. Even after you take it apart the ribbons will be in the way. The changer is very difficult to take apart. There is no easy way. You can push the unloaded disks out.
@@thespecialist786 oh I already took that thing apart...
Came close to Lossing a few fingers, plus I had to use an old 6" prybar.
But in the end, I got it apart and got the discs out.
Is there a CD Changer compatible with Bose Music IV?
Thank you for watching my Channel. Yes there is a CD changer compatible but very hard to find. You need the three disc changer. Which country are you from?
That plastic gear at 34:16 you were spinning with your finger.... is that supposed to be 1 piece... mines two ? Thanks
34:16 is the end, please check the time line and confirm so I can help you
Yes, that black "selector-barrel" is indeed two pieces. The top and bottom halfs fit together like puzzle pieces!
It worked
I got a used Wave Acoustic CD-3000. The radio works great. The CD player spins the CD and the display shows it started but does not begin to play. There is a soft clicking sound and will not play. I have tried different discs. What is the likely cause?
Hi, Thank you for your comment, please take some alchol on a ear budd and clean the lens gently. All should work.
@@thespecialist786 Thank you so much! I just fixed my WA-3000 single CD using your tip!
@@cherylk6752 I am extremly pleased to learn that you have success in watching my videos and understood my message. Fantastic! Five stars ⭐️ ⭐️ ⭐️ ⭐️ ⭐️ to you.
@@thespecialist786 Ah, fiddlesticks! I spoke too soon. The CD played for a few minutes and then stopped. Now the is a blinking "disc" on the display
@@cherylk6752Unplug your system and plug it back again. Not sure which Alcohol you used, try one of your perfumes with high alcohol. Use Very little, very gently, make sure CD is clean and has no scraches.
They had the 5 cd changer before they introduced the 3 cd changer.
as good as this video was, i wanted to know how to separate the plastic, i have removed every visible screw, yet this thing acts if there is a hidden screw.
Remove the rubber feet. Two hidden screws under the rubber feet. :-)
@@thespecialist786 thanks for your quick response, those rubbers are really glued in there, i knew there had to be more screws, but i had such a hard time getting those feet off, i just kept thinking i was missing something else.
@@carolinabeacher1558 that’s the idea, only to be opened by professionals:-)
@@carolinabeacher1558 please Subscribe, thank you for your comments
@@thespecialist786 im no professional at all, someone gave it to me, i thought it was a wave radio with cd changer till i got home, now not sure if i will just steal parts out of it or just tinker with it with hope of learning something.
(Update: unplugged it from the base unit turned it upside down, gave it a slight tap and in every direction plugged in just the power and it proceeded to eject all three discs! : ) Ya. Probably didn't need to flip it around and tap it lol
Original issue: I just keep getting an error saying remove disc 2. When I hit the eject button it says it's going to eject disc 3 but does not, instead it shows the remove disc 2 error again. See no way to select discs on my remote for the CD changer. Just stuck in a loop. Help please!
Thanks for watching me channel, your issue is with the loading sensors. Which seems to show wear on the contacts after time. You will have to open the changer and spray some AcP01 on the contacts. To send the correct reading the to system processor.
I am having the same issue I Bought mine 12 years ago had no problem until today. Bose can't even tell me where to take for repair. I am totally disgusted. Do you know where I can take to be repaired.
@@mairose7582 Thank you for watching my channel and your comments. Firstly please don’t be upset with Bose because everything in life has to expire at some point. Even nature creates things that expire, such as Flowers, Food, Life, etc. everything comes to an End. Bose have made this unit over 12 years ago so it is has to end at some point. Now the question is how to get it back to life. Where abouts are you in this World?
@@thespecialist786 I am in Southfield Michigan. Thank you for calming my thoughts, I guess everything has to end eventually I just wish I knew where to take it. I did noticed that Disc slot #4 did not accept the disc as smoothly as it should have. But I am thankful that my radio with the one cd still works. I don't even play it on a regular basis. Mostly when I have company, which is not often. My go to is TV. I love my Bose. I hope I can get it repaired. If not I gotta buy a whole new system. Radio and CD changer But again thank you for your response 👌👍🙏
Do they still sell the CD changer.
@@mairose7582 sorry to tell you, Bose do not make Wave Systems or Chnagers any more. So what you have is Gold. I am too far else I woul have repaired it for you.
Hi bud would you repair my one if I was to pay for your services bud?
Sure, which model do you have and where abouts are you. Email me the details
@@thespecialist786 will do bud its wave 3 bud with 5 dice
My God this video is exhausting
Amazing how people want information for free and still have the audacity to complain due to lack of knowledge and experience or willingness to learn or read between the lines.
@@thespecialist786 Info appreciated. Maybe I just had Pancreas surgery 30 hours ago an hate the World , right now. My Sincerest Apologies, Good Sir. I'm saving your video. It looks like the only way to fix this player.
Thanks Again!
Get to the point
@William Chow - What point are you looking for, you need to read between the lines. This is video is only for information not providing a solution.
Do did not actually fix anything.
What is your question?
Hello...I have a 5 CD changer and everything seems to function properly (CD transport) but it doesn't read the CDs...help!
Thank you for watching my channel, based on your description I would first clean the laser pickup lens with Alcohol. That should fix it. If you can make a video and send it that would be helpful.