Honda Accord all lights on ABS Traction ECW failed 38-11 38-11 abs solenoid valve malfunction FIXED
ฝัง
- เผยแพร่เมื่อ 15 ก.พ. 2022
- Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic.
RB The Mechanic. All rights reserved. Publication, reproduction or distribution of this or any video by any means whatsoever, including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world, is strictly prohibited without the prior written consent of RB The Mechanic.
#38-11 #3811 #honda #accord #tractionlight #abslight #38-11abssolenoidvalvemalfunction #abssolenoid #malfunction #hondaalllightson #hondaecwfailed #ecw #failed #2013accord38-11 #2014accord38-11 #2015accord3811 #2016accord38-11 #2017accord38-11 #2018accord38-11 #2019accord38-11 #2020accord38-11 #2021accord38-11 #2022accord38-11 #2023accord38-11 #abssolenoid #absmalfuction - ยานยนต์และพาหนะ
Video was amazingly helpful. I saved a ton of money by removing my module and sending it for rebuild with Module Master. I love all your Honda videos!
Nice good job glad video helped u and saved u money
What's the part's ,? name I have the same issue in my 2013 honda p
@@elgafe1236 and moduel
Ucambiaste. cuando cambias lo q le cambiastes.no se pulga
Where I can go to access module master ?
I just came back here to say thank you. I took out the module and soldered those broken wires and all lights are gone now. You saved me a lot of money. Thanks again!
Nice!!! Good job!! Appreciate your comment very much!!!
@@RBTheMechaniciiiiio
I just so happened to do a random Google search about this issue, and I remember your first video, and I'm so glad you solved it! Shout out to you, RB! You're the real MVP!
(Side note: This EXACT error happened literally one month after Honda Care expired on my 2013 Accord EX that I was paying a note on.)
One of my good friends is my dedicated mechanic and he works for Honda in the NYC area. Between me, his customers at work, the people on your thread, Honda forums, and 1/2 of the internet, too many people have this expensive and potentially deadly problem.
Honda should DEFINITELY issue a recall.
Yuppp they defiantly should and on the oil consumption
I did mine today on my 2012 honda accord coupe exl 3.5, and I put the top 2 screws in and the bottom left, but couldn't get the bottom right one in, I couldn't get enough room to get it started but I tightened the three really good and everything seems to work great Thanks for your video sir!!!!
I e
I have the same issue with my 2014 accord after watching this I feel confident doing it my self. Thank you for uploading this video your the best🙏👍
Yup there’s guy on eBay who can repair ur and moduel send him old one and he will fix and send back to u
@@RBTheMechanic how much does he charge?
@@emmanuellopez1028 I’m not sure I think it’s 250
@RB THE MECHANIC do you have thr part # ?
Having the same issue with my son’s 2013 Honda Accord. The dealership quoted $2,600 to fix it. Ouch. I checked for recalls, but none issued yet. However, lots of complaints filed. I would encourage anyone having this issue to file a complaint with the National Highway Traffic Safety Administration (NHTSA). It’s the only way Honda will take responsibility for it.
Not only this is expencive repair but imagine ur car out of control 80MPH and the contacts internally move and boom no control over car this is dangerous for driver and other on the road
I had this exact scenario happen to me recently on a 2011 Honda Accord V6 at about 75 mph ! The car lost all steering and the brakes were gone. The car spun wildly across both lanes. God was looking out for me as the car ended up in some soft sand on the side of the road. The only damage was some plastic on the front bumper from the impact of short and thin width mile marker sign. The Arizona Highway Patrol and local county Sheriff were dispatched. They were amazed that the car was not damaged. I no longer trust driving the car so it will have to be sent off to Honda dealership soon. @@RBTheMechanic
having same issue with my honda accord coupe 2012 this video helps alot
@@benjiesilva6395 2013 is diffrent. Did u scan for codes
@@RBTheMechanic yes its say vsa module malfunction so im looking for this module until now
Sent my module out to California and recieved it back, after install and clearing codes with scanner all lights are gone. Only getting check charge system notification that I was getting before.!!!! Thanks for this video!!
Ice glad u fixed this issue!! Check charging is related to alternator so check voltage check horn fuse also and see if horn works also disconnect and connect back battery sensor some times it’s loose
@RBTheMechanic I changed the battery, horn works but do have some interior lights off in the center console cigarette lighter and light for park thru drive shifts aren't working.
@@garthmorris6740 check fuses for that anything could be possable with that check charging I had cars with bad horn fuse cause check charging
Charge light coming from the lil box on the negative battery terminal
Used your video as a reference for my 2014 Accord. Thanks!
Excellent!
I had a similar issue,after checking the car, we ended up finding out that the issue is the brake fluid that needed to be changed( it was dirty). Thanks for the video
Oh ok
Hello, did you have the exact same issue as shown in the video, including, break failure and traction?
I tried changing the brake oil and still getting the lights on. However, they disappear once I run the car for at least 5 mins. Although sometimes, after disappearing the only one ON is the 🚘 Traction OFF one. Any suggestions???
Appreciate your video, good tips, it's very encouraging.
Yup
I just want to take the time out my day to thank you my brother, your video truly good job of helping me to solve this problem. Thank you so much for everything.❤
You are very welcome!! Glad u got this fixed!!!
@@RBTheMechanic I used your video to guide me. It’s no side installment video available but yours. You use hood details to explain how to do the job .. Save me so much money 👍🏾 thank you again 🙏🏾
@@jamarb195 yup thank u!!
Try disconnecting the battery and wait 15 minutes. Will work. Worked for me.
Ur just resetting it
Great video! I had the same issues with my 13 accord LX-S coupe. Rather than buying a new or used module off eBay, I decided to tear into the module and repair it myself. It took some research, trial and some error but it’s fixed. Commonly, it seems, the electro-welded connections inside the module with very thin, very soft wires come disconnected from vibration. I had no wiring diagram but tested continuity to find the broken connection. Soldered new wire on and good to go!
Niceee I need more information u have some pictures? I still have the old moduel I will check it out it makes sense how light came on and off maybe contact bounced around from vibration
I do have pics. Before and after, but I went overboard and soldered new wires on all connections.
@@alanlauver9705 email me I’ll see and then inspect my moduel laying around thecarmechanic201@gmail.com
Hey i’m having the same problem with my 2013 Honda accord. I’ve changed everything I’ve changed the map filter I change the air air sensor filter. I change on a spark plug coil packs in the lights. Keep popping I don’t really have much problem but then that light pops on the ABS light end I lose power but if I shut my car off and turn it back on, it’s gone
@@fernandooyola6862 Thai car has issue with moduel did u scan for the codes I took the old moduel apart it had broken cables inside I will post this video this week soon as it’s finished editing
Thanks for showing me the strat. This is what has to be wrong with my Accord too.
You're the Man..... Great one... Thanks a lot... 🙏
You're welcome!
Nice video love to see plp like you never give ip
Thank u
Great video I have the same problem I want you to fix it in 2014 accord
Yup u can replace this buy or rebuild it there’s service on ebay they u send them old one and they rebuild the moduel
1:15
"Fuck it" 😂
Hi RB.
Like always, this video is amazing! I’m a subscriber and I watch your videos all the time. You rock! I am having the same issue with my 2011 Honda Pilot. I’m getting a 121-01 code for. A VSA Solenoid Valve Malfunction. I ordered the part for my car and I am going to attempt to fix it. By chance, if I can’t do it myself can I come by your shop and pay you to do it? I live in Queens but I am always in New Jersey visiting my daughter. Thanks again for making these videos. They really are a huge help.
Sure we would have to schedule it time and days I’m usually booked so we will put in time for your car update me how it goes worst come to worst I can do it
Thank you so so much!!
You welcome was this video help to resolve ur cars issue?
The best master mechanic awesome 👏
Thank you!!
I have this issue on my 2015 civic, I changed the fuse and no luck so tomorrow I’m going to change just the module like you did. 🤞🏽Hope that works and I don’t have to change the whole thing.
Civic is in complicated spot but u can do it
The connector with the white clip had oil inside of it, you think I should just replace the entire part including the pump?
@@robertquiroz630 if it’s brake fluid yes it could be leaking
@@RBTheMechanic I remembered my pops sprayed WD-40 in the connector 2weeks ago thinking that could help so I only changed the module and the lights turn off right away. I only took it for a 10min drive but no lights so 🤞 hope it stays that way. Thanks for all your help!
Man thanks so much buddy 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Yeah no problem…
Thank you so much man,
Your video it’s work,
Thank you, thank you, thank you much.
Welcome!!!!!!
Hey, so interesting video. I gotta ask though, why do it this way? If you already have another VSA modulator, it is pretty easy to remove the old one and pop the new one in. You are splitting the old one in half, splitting the replacement in half, trying to get the pins to all fit back together, risking that the unit isn't sealed up correctly....seems like a lot of work and risk for no reason. It is pretty straightforward to take a flare nut wrench and undo the brake lines, swap the unit out (you already took off the bracket mounting bolts in your method in order to jam the unit sideways) and then tighten down the brake lines again. Just a thought for others who come by and watch the video here
I use to do lot of these on older vehicles before I started TH-cam … if u change the whole thing u need to bleed and do big long process I actually recommend the whole thing to customer but he said to change the moduel only which I have no complaint for doing I prefer it this way!!!
@@RBTheMechanic i have same concern. Is it ok to just replace the solenoid part of the VSA modulator instead of replacing the entire unit?
@@bzq3386 which solenoid part ur talking about? I replaced the module which are solenoids
@@RBTheMechanic my bad. Thats what I meant. I mean if its ok to replace half the module instead of the entire unit?
@@bzq3386 yup that’s exactly what I did just take ur time and watch the video carefully before u attempt it should be easy disconnect the battery before beginning
Fire video I just did mines
Yup I just did recent video on this I cut open the moduel and found broken contacts check that out th-cam.com/video/ncoyKh9kJUU/w-d-xo.html
Hey Brodda! Amazing video!!!
I have a 2014 Honda Accord with the same issues. What is the part number for the module?
Idk the part number u have to search it on eBay or buy new one goes by the year make model
Great work, i have same issue with my 2012 honda crz. Are there certain modules i can use from the 2011-12 crz's that are also manual or does it have to be the exact same part #'s? Thanks in advance
That’s somthing I can’t say for sure but I would search for same exact year make model also there’s service on ebay that charge about $250 u send them the moduel they repair it for u and send it back u can search them by abs moduel repair
Thanks for video, i could not get the 4 small lines nuts loose, i tried Gearwrench flare nut spanner and sidchrome, and this is the only option for me,
Nooo u don’t need to get any brake lines out only connector and 2 screws that’s holding the box moduel
great video , my friend's honda i fixed was bad module i replace whole thing with another used one. codes went away. i wonder why those kind always fail
The capacitors inside goes that’s the issues sun guy service then on eBay u gotta send him old moduel
Other than all the Christmas tree lights on the dash, does a bad VSA cause the transmission to shift hard through the gears? I have 2014 MDX.
I have not noticed that people been driving without any other complaints
Thanks for the detailed video!! We're having the same issue on a 2014 Accord; however, I confirmed that both rear hub bearings are bad. The parts will be in this week to swap. These lights used to come on and off periodically, now constant. I'm wondering if the bad rear hubs have been the culprit all along. I'll follow up when I swap out the rear hubs. Thanks again!
Bad hubs can cause abs codes usully the hubs would make noise anyways do the necessary repair first then reset the lights. Also u can scan to see if u have abs moduel codes
@@RBTheMechanic Thanks!
@@stephenjeronymo6093 What was your update please. Seems I have the same problem with my 2015 Honda Accord LX
I have this same issue with a 14 accord exl 2.4L w/55k miles. I was wondering if there is any reprogramming that you have to do when swap out the old and replaced ECU? Please advise. BTW, keep up the great work. Many DYI'rs are really appreciated your knowledge and prognosis. Great work!!!! Bravo....
Also, I found a used ABS/VSE assembly for same the price as the repair from ebay. Do you think I should get it and swap out the ECU or just send my old one in for repair? Looking forward to your advice. Many thanks.
No u don’t need to reprogram
Buying used one is taking a chance they all got the same issues and start to occur around 50-80k miles so if the moduel u buy is good it should work out no programing needed I just put this one is and it worked u have to might reset the light and calibrate the tpms from the dash anways. I would go with sending out my old one at least it will be better chance and last u longer
@@RBTheMechanic Thank you for your response and advice. Will send mine in via ebay. You're great!!!!
@@SangNguyen-oh5sp let me know how it turn out!!! And how fast is the service I’m planning on doing more down the road
Thank you for the excelent video, where can I buy the vsa module?
eBay or go brand new from dealer
Want to drop a thank you too! Just did this today with my car! Very helpful video!
Only thing I did struggle with is taking out the bottom right nut on the module, I don’t have a crowbar but even with my hands I couldn’t move enough like you did in the video to create space for the ratchet, could you give some pointers there? Did you remove some other things out of the way?
Just pushed it with some force that all brother
Hello! Great vid. How long is the flex head ratchet you was using ?
I’m not able to watch the video at some place low data but if it’s soft handle it’s like 13” lenth
I have a 2014 Honda Accord with a 32-11 code (abs solenoid valve malfunction) and a 61-11 VSA modulator control unit power source circuit IG low voltage. Would you recommend me do exactly what you did in your video???
Yup seems u have same issue just different selnoid in there
Hey RB,
I have a 2013 Honda Accord under 76K miles. For the past month I have been having the same issue. The ABS, EPS, traction and brake light come on and off. I went to other zone and I got a scan with the code 32-11 for the ABS Solenoid Valve Malfunction. Then 2 days ago, the check charging system notice came on the dashboard. I have someone check my car out for me, and said that my alternator was fine and had a charged, but the battery didn't had any water in it and the volt was low when them had check it. Once he put the water in the battery the volt came back into range. I was quoted $2k just for the module alone from honda.
Now I am noticing that when I am reserve parking in I am hearing a squeaking sound. Plus when I start my car and make a right turn, I am hearing a cracking sound in the front.
I ready some of your comments were you recommend to have it fix? Do you have a contact for the person who makes the repairs. Also are you located near NYC?
PS: Thanks for staying update and replying to the comments! I know you a busy with with work. You replies has help me out. I appreciate you for this! Thanks again and God Bless.
No I don’t have contact but u can swarm them on eBay just type in abs moduel repair it will pop up
I am faced with the exact same problem, I have ordered used ABS Module and change it today but still the same lights on and and when I do reverse parking I hearing cracking sound as well in the front. I really don't know what the hack is going with Honda I will never ever buy Honda again, I am sick of it,
@@mohammadayazi9891 yeah they need to recall this but u can also send ur old one out for repairs on eBay it’s $250 they make solid connections inside this one has hair size thickness wiring that’s what broke
@@RBTheMechanic thanks Bro, I will send it today I hope they will fix it
I have exactly the same problem. They are charging me $3,000 at the Honda dealer for ordering the module. Please tell me the real solution to this problem. I need to turn off those lights. Thank you. Greetings from Puerto Rico 🇵🇷
Hi where were you able to buy the solenoid, I’m having code 81-03 for yaw sensor. I’m assuming the new solenoid would fix it
Well this is all built in so u have to buy the whole moduel but u can calabrate the yaw rate sensor with scan tool
Hey. So I got a 2014 Honda Accord. The ldw, fcw, and traction control lights came on like 6 months ago. Now the abs and break light are on. I’ve replaced the brake, speed sensors, calipers, rotors, new brake fluid. The lights are still on. The 38-11 code was on along with 81-19 and 81-20 which 19 is the yaw rate sensor and 20 is the acceleration sensor. But say they’re in the modulator control unit, internal circuit malfunction. You think the abs module is responsible for all that? Or is the modulator control unit something else?
Ur model is the issue
@RB The Mechanic Great video and a wealth of info in the comments here. I searched and couldn't really find the answer to my question; so I am going to ask. I did find the G7 Computers who will rebuild and back it up with a lifetime warranty. My question is and this may be a dumb question, can I remove this module only and drive the car until the part is rebuilt. If the part is presumed failed, I guess I can't see why it would matter.
I do want to look at the fuse first; what should I be looking for to see if it is blown. From your video, it does not look like a typical fuse. So I don't if it will be obvious that it's blown.
If I did go with the replacement route where I found the exact fit for my make/model/year- Is programming from the dealer required?
Yeah u might have to pull out the fuse chip and look at the contacts anyways about driving. I wouldn’t recommend it I’m not sure how it would effect the driving wit moduel off I don’t have idea on that never tried it
@@RBTheMechanic thank you sir. As for the replacement route, is programming required by dealer?
@@buffalolegend nope they already programmed
@Rb Hey friend I have a question for you. How much would it cost to purchase an alternator for a 2015 Honda accord ex-L model?
Go original from dealer it’s like $600. Don’t use after marker it wount work out
RB, big fan of the channel. I have a 2014 Accord sport with the tpms,traction control, and power steering light. I have an 81-19 and 81-20 code. What would you suggest? Thanks
I would to begin reset it disconnect the abs moduel and let it be disconnect for 29 minutes then connect it back
Appreciate the response
What did you end up doing
@calvinvillacres1326 I disconnected the module and waited 15 minutes. Plugged it back in, and all the same lights came back on shortly after. I'm still driving the car with all those lights on. No issues.
I get TPSM, hill start, power steering and vsa lights on my dash with code 81-20 and 133-1. Dealership wants 2K to replace it. Is there any way I can replace this part with used ones? Will it require Honda's HDS system to neutralize steering wheel or something? Or VSA module is plug & play?
Car type: honda civic 2014 LX
Try getting ur old one fixed from eBay search up abs moduel repair. Putting in used one might be bad or will go bad quickely
Thanks for the video. And that ABS module is expensive, right?
From junk yard it’s like $200 if u find a good deal u can get one with low mileage for bit more also there’s this service on ebay u send them ur old moduel and they will fix the issue that it got problems with resistors and capacitors that’s all it is u can search them and message them on eBay
@@RBTheMechanic Excellent! Thank you very much. And is the module compatible for all of the 9th generation? I have a '13. I get those lights on my dash. I'm going to check the sensors to each tire first, then I'll go this route. Thank you again!
@@nesone6520 yup it should be same same but when u do purchase it make sure u buy it for the year u have u never know the parts sells know it better but it’s should be 100% same
@@RBTheMechanic there's a company that rebuilds them with lifetime warranty for $225 for Honda called G7 computers, imma give em a try
@@teenice894 I’m gonna take note of that and make a ramp let on shop office so I know where to go when I need somthing done with these
Maybe it's out of context but is it possible to replace a single solenoid valve from the hydraulic block? If yes where I can find a repair kit?
No u have to replace the whole thing search up on eBay abs moduel repair they service ur old one u just send it to them
I have an 08 accord v6 and all the brake lights are on and when I press on the brake I can hear a clicking from the gear shift solenoid that I never heard before. Could that have something to do with the lights being on?
No I think that suppose to click to allow u to shift
Question when u install the new module do u have to program with the computer or no need to program it?
Don’t need to program!
What type/size of bolts are holding that module to the pump? Torx T10?
Torques I think so that’s the number
I have a 2014 Honda Pilot touring and I get the vsa and abs and Break light on and I got the code 121-11 and it says it’s the vsa solenoid valve malfunction and do u think it would work if I just change the part u changed on the Accord in the video just the Computer part ??
It seems to be same issue try to Google if this is same code related to abs moduel selonoid I don’t have the data on the code but most likely it’s samenissue
Hey friend so I did another check on my Honda. I disconnected the vacuum hose from the intake manifold. I poured some seafoam inside and tried to start her up. The first time it didn't start the second time it tried and almost stayed on and the third time it stayed on. I left it running and when I put the hose back on it turned off. Took the hose off and she started back up again. Put my finger over the opening in the manifold where I took the hose off and it turned off again. The whole time that FCW light and the other lights were still on but it was running idle and sounded fine. Didn't sound funny or nothing. Going to drive over to the shop and see what code they come up with boss.
Try cleaning the throttle I have video on that type in accord throttle cleaning rb the mechanic. It will come up
the same thing happens to my honda accord 2014 lx all those lights are on I wanted to buy a used module but the only ones I find are from an ex of the same year I would like to know if it works even though it is not the lx version?? I would appreciate your help
I’m not sure I think they all are same but just to let u know there is this service on ebay u send them ur old moduel and they rebuild it cost is like $250
Thank you
I have 2016 Honda Accord LX,
I'm a beginner, can I do it?
And where can I get a long, flexible bar for loosening screws?
Everything I used u can buy from pepboys
Can I see the ebay module seller?
@@shop22600 the guy only had one search up LKQ it’s very big online junkyard they on eBay amazon all over base is in NY but u can have them ship it google up the name and number and give them a call
Thanks for the video. Where are you located by the way?
I’m in north nj Bayonne
Thanks for Video...
Hi
I tried several times to loosen the lower bolt among the three bolts that the module is attached to, but I couldn't.
It is difficult to insert a long connecting bar, the direction is not correct, and it is difficult and too difficult to check the attached bolts. Any good ideas on how to solve it?
This is the only way should be simple and easy
Hi RB I have the same 2014 Accord V6 with 85K miles. How much should the timing belt, water pump, and tensioner replacement cost? how many hours is this job? Thank you for your videos very helpful.
Good parts and labor with total kit will run around $1400 job is like 4-6 hours if everything goes smooth. This is price for like original parts after marker maybe $900
I’m wondering if the code UO155 came up because of this? I’m having a hard time figuring it out. It’s for a Honda accord 2016 ex.
Any advise? Thank you,
No not related to this more could be glitch if cluster panel I would reset the light and wait for it to come back again before repairing anything
My civic 2015 giving 121-11 error. And problem is tr0r2 code abs not available in the market. Can you please guide me do i have to change the abs with different code air i have to just check brake fluid?
What dose the code description says I don’t have that informant the scan tool suppose to tell
Man! I will gladly drive to you for repair service
Why wassup what issue ur having?
The same issue. Those 3 lights are on TPMS, EPS, VSA. I have a 2014 Accord Sport 4 cylinder
@RBTheMechanic Will you repair it sir?
I am having the same issue with my 2015 accord exl-v6. Went to a local auto zone and rain diagnostic. Code was 38-11 abs solenoid valve malfunction. It also states fcw system failed. The new abs module is way too expensive $1300. Is it okay to drive without replacing it or should I get fixed? Can I use the abs module from ex or exl v4 vehicle or it has to be from my exact car model exl-v6?
Not sure if that would work why don’t I send out the abs moduel they charge $250 on eBay search for abs moduel repair and sent them a message and u can have mechanic put it in. U can see how easy it is when I do it
@@RBTheMechanic thank you. I’ll contact eBay people. The lights come and then go away. The lights don’t stay on permanently.
VSA DTC 38-11 stored/ Rec replace
VSA modulator and bleed system.
$1927.91
This is what my local Honda service team quoted me. Is the abs module and vsa modulator the same thing?
@@khanchango same that’s expensive
RB where can I find a used ABS Control module for exact same car as this one? 2014 Honda Accord LX 2.4 L VTEC Please share a link on where you got yours.
eBay or send ur old one out for rebuild on eBay they have service to rebuild he charge $250
I’m having this same issue with my 2014 Accord Exl. However it keeps pulling off a misfire code also. I checked, clean and replaced spark plugs. Coil packs are good also. Should I try changing the module?
What is the misfire code. And scan the abs moduel and see what codes u get
@Owen Boyd I’m having a similar issue as you. Did you solve your problem?
@@BikeLifeHooligan yup resolved bro I sent u another msg check for abs moduel codes
I have the same issue on my 2017 Accord however I have taken it to a couple of places and it doesnt come back with any codes. Any advice?
Depends on what scan tool they r using and if they scanned all models. It need scanning with high end scantool
Hey RB have the same issue with my same yr 2014 Accord sport. Just put a used module in drove it 20miles like the mechanic said to and lights still on SMH 🤦🏾♂️ can it be because the used module or could be something else?
Used moduel could be bad as well scan for codes ? And it’s better to send out ur old one to eBay service they will repair it for u
Hi
Do you have Honda accord 2016 fuel pump replacement video?
No I don’t sorry but it’s in back of the trunk
Yo bro!! Awesome vid. Dealership said I had to change the abs modulator AND the fuse box?? Why do you think they trying to change the fuse box?? I get the module being changed but do you think they cmjust trying to get more money out of me by changing the fuse box?
Sorry not fuse box but they mentioned a relay box??
They crazyyyyy there’s fuse in there I would check that it’s like circuit multi fuse it says abs on it. Anyways there’s this guy on eBay search him up repair abs moduel u can send him ur old one and he will repair it and send it back like $250 and u can change it ur self!!!! Easssy
I have a 2013 sport model, only lights I have come on are the TPMS, Steering and traction. The TPMS blinks and then stays on along with the Steering and traction. I do have 19 inch wheels and stock are 18 inch wheels. Idk if that would be the cause of the issue. Dealership in Paramus (DCH Honda) told me that it was because I have 19s installed. Any info on that? Thanks in advance.
I think that is the issue but we could be wrong my friend had 19 and he’s fine so far been months. Scan the car see what are the codes. Also u can go back to stock and give it a test
@@RBTheMechanic Got it scanned and it said it was wrong wheel diameter. But I had 19s for two years and it started happening in November.
@@AllMoneyIn123 yup then that’s what it is
@@RBTheMechanic Back to stock size 18s then. Thank you for the help I appreciate it.
Update*** I went back to stock 18 inch wheels. Lights didn’t go away, days before I installed the rims the ABS and brake light came on. Abs and Brake light come on and go away when they feel like it. Any info on why this could be happening? Thank you for your time and videos.
When it comes to purchasing another abs module would I go buy engine or trim in terms of purchasing? I have a 2014 accord sport cvt and I'm trying to find out if a 2014 lx abs module would fit or if it has to be a sport module. Both are 2.4l engines.
U have to go buy same exact one for the year make mode I think they all day
Do you do the repair for the module and if so how much 2013 Honda Accord ex.
I don’t do repair I send it out my labor is $$190 +storages charges while the moduel is out for repair and the service of the repair faculty is around $250
I have the power steering, traction, and tire pressure lights. The tire pressure flashes for a minute or so. I don't have the ABS light.
Can an auto parts store scan it?
Yeah autozone can scan the abs moduel for codes. Mostlikely this is what it is
just got my module back...The VSA/ABS/Brake lights are still on...Do I need to do anything to reset them or should they turn off on their own?
Go for a drive it might go away on it’s on also do TPMS calabration
BROOO! I just replaced the one on my daughter’s Accord 2012 and all 3 lights (TCS, ABS, and Break ) are off after driving it like a 1/4 mile.
Nice good job!!
Hello I am having the same issue. I was curious. Where are you located ? I am in ny Bronx area. Hope to hear back . Great video by the way. Very helpful
I’m in north nj Bayonne
Ok that’s not tofar . Your work is definitely worth it from what I see . I have had a scan done and both times I do not get the codes your referring to. Eventhough then lights are on . I was wondering if it could be the abs wheel speed sensors or the fuse that you was referring to. No matter what I would like to some make an appointment with you . Let me know how I can contact you if possible. And thanks in advance you are amazing brother. I can’t even talk to my local mechanics . Aaazzzzzholes. Lol
@@SuperTeemercado Scan the abs model get me all the codes and I can guide and tell u what it is and if ur able to come to my area we can repair it
That’s the weird thing it didn’t even come up with a code. The only code is a p420 . And I didn’t even have that light on my dash . The report shows that the abs light was on but then goes on to say no reslotutions found. How do I go about getting the codes and info you need and I will do it.
I wanted to send you a photo of the report but can’t add a photo here.
Put the connector in first,, much easier. Got mine rebuilt in California from eBay for $299.
Ok thank !! Nice how did it work out?
Same issue. My question is. Do we have to take to dealer to program a repaired module?
No not if u buy used one or send out ur old one to have it repaired
Hey! 2008 accord with solenoid malfunction. If I buy a salvage part, do I need to have the dealer reprogram or will it clear lights and codes / work automatically?
Quick question, mine does come on and off and I do have a 2010 Honda Insight, could it be the same issue?
U have to scan it to get the codes
If you solder and replace or have the part fixed via ebay, what do you do to ensure there is a good seal between the two parts?
They seal it up I guess they do it good or y can use some type of sealer on top to make it better
@@RBTheMechanic Any recommended seal to use between the VSA Module and VSA Motor? Do I need a seal or does the part just lock back into place?
I am getting code 66-13 and 61-11 on a 2014 Honda accord sport. It says Pressure sensor inside of VSA modulator-control unit. Is this the piece I would need to replace?
Yup u can pull out ur old one and send it to abs moduel repair service it’s on eBay search it abs moduel repair it junk they charge $250
@@RBTheMechanic ok, thanks I will check it out. Dealer was trying to charge me 3k to fix it lol
hey i get honda crosstour and i changed the rotors and pads and i get the 66-11 and 66-13 abs code what i need to do?
Ur moduel might be bad
I have this same issue. Question? If i change the module to a new one or used do i have to program it?
I put in this new one no need programming not sure about brand new one it may need flahsing
I have a 2013 with TPMS, EPS and TCS lights on. Will that same module fix it even though the ABS light is not on?
First u have to scan with high end scan tool and get the codes for each moduel
Is it normal to hear hizzing sound like air relieving on that area and i have the same lights on. I got the lights to come on after i took my 2014 civic to the honda dealer's auto shop when they washed the engine to make repair on my transmission.
Ur pump might be bad or leaking pressure
Thank you for quick response and I'll try to tighten some screws and I'll go from there to take it professional mechanics. Thank you.
How do you know if it’s the module or the pump that’s the problem? Thank you for the info so far
Good question the codes in the title are the reason they r inside the moduel so scan the car for codes in abs moduel
@@RBTheMechanic ok thank you!
I have the same issue, how do I find the correct part number? Where do I buy the part? I have a 2014 Honda accord.
Best option is have the moduel removed and on eBay they have rebuilding service send out the moduel and once u recieve it back install it and ur good to go
So you said I can remove the module on a v6 without disconnecting the brake lines? Once I send the module out what do I suppose to do with the remaining portion of the module that is attached to the brake lines. Do I have to cover that area ?
U cone need to cover it cover the connectors and just to let u know u can’t drive even though it’s drivable but not good idea
@@RBTheMechanic it's there like some type of caps or something I can buy from the store to put on the brake lines once I remove my abs box ?
one more question RB. IfI take my module out for repair will my car still drive? Do you know who repairs these? Ordered twice off of eBay and they wont program to my car Tks
I don’t have answer for that because it’s not safe to drive without it but I had customer whole had me take it off so he can send it out and he drove back home like 12 miles and once he had it repaired he drove it back to me to install it but it dosent have stability control any more so it wouldn’t be safe to drive
Help! My car is a Civic 2013 EX-L, show code 81-19, i need to change the module?
U might want to do yar rate calibration with high end scan tool
Did you have to program the new module?
Good question and since this is used out of same year make model. NOPE!! Don’t need programming by the way there’s sun guy on eBay that can repair ur old moduel u take it out send it and they fix it and send it back like $240
2014 Accord EXL Same issue after having routine/scheduled break pads replaced by the dealer. They act like they have NO idea!
Yeah dealer dosent care I would stick with regular mom and pop shop at least they appreciate u giving them business and they do best for u
By the way have it scanned and let me know what codes r in abs moduel then I can guide u
Thank you! Good idea!! Appreciate your thoughts/feedback! 🤍🤍
@@kellieie827 no problem welcome!!!
These lights came on as I was on my way home from work in the rain. Freaked out ran codes. Showed 123-11, 61-11, and 85-01. Was on my way to Autozone to test battery then all lights turned off. Went today to test battery they said it was good. On my way home now the ABS, VSA, BRAKE light and power steering turned on. Scanned it and now I only get 85-01. Any advice on what to check? Wheel speed sensor? Thanks! Car doesn’t feel weird at all.
Seems like this moduel is bad here’s a video it’s possable it’s making connections on and off
th-cam.com/video/ncoyKh9kJUU/w-d-xo.html
@@RBTheMechanic yeah it’s confusing. Changed the battery it came off for 2 days. Light comes on. Get home. Go for a drive hours later then it turns off again lol it’s so confusing. Gonna have someone check it out.
@@Polop323 it could be broken contacts internally that comes on contact as it moved and bounces from driving
@@RBTheMechanic is it worth preparing?
@@Polop323 yes
Hey RB, can you drive while the black module is being repaired?
I wouldn’t recommend it not safe car can loose control
❤❤❤
Hello sir my car has the same issue is your shop in Houston texas if not do you know a mechanic here that you recommend ? Thank you
No, sorry but this is easy to replace if u want to do it urself
Great video!!
My 2014 Accord LX is having the same issue.
Mechanic told me the code # 123-11 / 81-20
Any advise, please?
It’s same repair as I did
@@RBTheMechanic Can I still drive my car while VSA ABS Brake Control Module is taken out for repair?
@@josephtsang7496 nope
I do have same issue with my Accord coupe, i will try your solution today and i hope it will be fix, BTW, sometime with bad road condition when i press the break its feels like empty and i just replace the old break with new and everything is good but sometime in bad road condition when i press the break it feel like empty do you think i have the same issue,( i do have the same light and i went to mant mechanic and they all said everything is good under the car please advise.
It could be traction issue when on bumpy road or this abs is not working
@@RBTheMechanic the break issue showing on bad road and bumpy otherwise its good,, the ABS mark and steering mark is showing anyway in the dash same in your video
I have 32-11 ABS Solenoid Valve Malfunction. How much will it cost to fix. Honda 2011 V6 EX
If u can get the used moduel u can put it in urself … part can cost like $240
Hey rb I got a couple of question with my car having this problem is there anyhow I could give you call?
Sorry I don’t talk on phone only donrepairs if u require me to but u can ask me here
Is the part called the "ABS Solenoid Valve?" Cant find it on auto parts shops
It’s part of the moduel u can’t but it separately
@@RBTheMechanic Man, ty! Trying to find on Oreillys website but can't. My daughters are out in it right now so Ive gotta try and get it fixed today but having a problem finding the part. They turned the car off, and then back on and the lights all went off. Any chance it is fine or should I just assume its bad and replace? Any suggestions on where I can find the part? No one seems to have it and it appears to buy through Honda is around $1,000!
@@wef0711 well if ur sure and confirmed about and moduel. Then try searching up this service on ebay. Search for abs moduel rebuild they charge $250 u ship him the moduel he will repair it and send it back. But defiantly car need to be sitting around it’s not fast and quick repair
Where in bayonne is your shop! Whats the name .. I live in North Bergen, NJ
I’m in bayonne I can share u my contact if u give me ur email
I just re-installed my abs module after getting it repaired from eBay. At first all the lights came on but went for a quick drive and they all disappeared. Do you know if I have to reset the lights? At the moment they haven’t come back but I have not driven it far. Just afraid they will come back and wondering what would be my next steps.
I think ur set that’s how mine was they were one and they went if soon as I drove anyways reset the all the codes and u should be fine take it for drive
@@RBTheMechanic thanks man. Seems in order to reset if they do come back I will need one of those computers. Is that accurate?
@@RR_85 I doubt it this will come back on u should be good
@@RBTheMechanic thanks man
Let's us know if it comes back on. I'm about to send mine off. 2013 Honda Accord LX doing the same thing.