Converting BCS Two-Wheel Tractor to a New Style Clutch
ฝัง
- เผยแพร่เมื่อ 19 มี.ค. 2017
- This video explains the process for swapping out a old-style BCS Two-Wheel Tractor clutch with a set screw to the current style. To reach the BCS America Tech Service department, call 1-855-832-4505.
Service Bulletin 2-5 that is referenced in this video can be found here:
www.bcsamerica.com/service-in...
Find your nearest BCS servicing dealer here:
bcsamerica.com/find-a-dealer
Follow BCS America on Instagram:
/ bcs_america
And Facebook:
/ bcsamericallc
Great vid 👍
can you immobilize the engine shaft by stuffing a starter rope in the spark plug hole ?
Yes, that should work fine.
Hola, como saber cuando el clutch esta fallando y Cúando se debe cambiar?
It seems the criterial point is 4:1/2”
Is there a leeway of 1/4” ether side of this
Sorry, can you be more specific with your question?
I have a 722 bcs rototiller i take off the engine to put a new piston rings and i put it back on to the machine but not i can't get the clutch to engage with the pto any help? Plz
We'd recommend a local engine shop. There are a lot of things going on here.
@@BCSAmerica ok thank you
@@BCSAmerica i got thank you was the fork was pushing the clutch out
Thanks please what is the parts number?
I have the 725 model and it's not even listed.
The linked Service Bulletin is for tractors built after 1995. Model 725 hasn't been in production since 1994. For tractors built before 1995, you need Service Bulletin 2-4, here: s3.amazonaws.com/bcs-america/manuals/Service_Info_2-4.pdf
All of our Service Bulletins can be found on our website: bcsamerica.com/service-information
Hope this helps!
@@BCSAmerica, thank you for replying. If I have the new Kohler 9.5 on my 725 does the Service Bulletin 2-4 still apply to me?
@@omcdude64 This service bulletin only lists tractors and the engines with which they were originally sold. We did a little research to figure out what you'd need with your tractor:
The original clutch on model 725 was rated for up to 9hp. If you're 725 still has the original clutch and you've converted to a 9.5hp Kohler engine, the HD clutch you need is part number 59247573. These are readily available.
Give us a call and ask for the service department if you have further questions: 1-800-543-1040.
Thanks!
@@BCSAmerica thank you again.
And why is this cone shi* better than pinion key? We have a lot on problems since new.
The taper lock provides a much more secure connection, rather than a single set screw. Set screws can be a real pain to remove and can break.
And why is there a groove on shaft?
Language hindi.