10 AMAZING 3D Printing Projects: Rocky Mountain RepRap Festival 2023
ฝัง
- เผยแพร่เมื่อ 27 มิ.ย. 2024
- Thanks to LDO Motors for sponsoring my trip to RMRRF. Check out their great VORON Kits: geni.us/LDOVoronKits
I visited Rocky Mountain RepRap Festival 2023 in Loveland, Colorado. Let me show you some of the fantastic projects I've seen there!
Check out our CNC Kitchen products at cnckitchen.store/ or at resellers www.cnckitchen.com/reseller and on AMAZON (EU) geni.us/s8rYtQ
Hero Me Gen7: www.printables.com/model/39322
VORON: vorondesign.com/
VORON Belt Kit: voronkits.com/
Positron V3: positron3d.com/
LDO Motors: ldomotors.com/
P-REXZ Polar Printer: github.com/Armchair-Engineeri...
Phaetus Co-Extrusion Filament: www.phaetus.com/aecoating-nex...
Cocoa Press Chocolate Printer: cocoapress.com/
Canadian Pumpkin Spice Filament: canadianfilaments.ca/
3DChameleon: www.3dchameleon.com/
3DKlippy: www.printables.com/model/3711...
PhotonCast: www.lowry3d.com/
💚 Support me 💚
Patreon: / cnckitchen
Join as a TH-cam member!
Buy an Original Prusa i3 printer: geni.us/CNCKPrusa
PayPal: www.paypal.me/CNCKitchen
Shop at Matterhackers(US): www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): geni.us/zHvnB
JLCPCB 3D Prints starting at only $1: geni.us/JLC3DPrinting
🎙Check out my Podcast with Thomas Sanladerer: / @themeltzone
⚙ My gear:
🎥 CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: geni.us/M2Sm
30mm f2.8 macro - Great Macro Lens (80% of my videos): geni.us/vEwqD
10-25mm f1.7 - Awesome Lens: geni.us/ZTBH
12-35mm f2.6 - Great Allround Lens: geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel Lens: geni.us/fSAyKo
25mm f1.4 - Nice prime for photography: geni.us/mqWM
🎙AUDIO
Rode Video Mic Pro - Shotgun mic: geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: geni.us/XMD2N
Rode NT-USB - Studio Mic: geni.us/YVONvy
🔴 LIVE STREAMING
Elgatoo Stream Deck: geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: geni.us/imhD
Logitech C920 - Overhead camera: geni.us/ViVgB
Follow me on Twitter: / cnc_kitchen
Follow me on Instagram: / cnckitchenyt
Chapters
00:00 Introduction
00:30 Travel Montage
02:12 Hero Me Pro
03:24 VORON
03:56 VORON Belt Bed
04:54 Positron V3 & LDO Motors
07:04 P-REXZ Polar Printer
08:46 Phaetus Co Extrusion Filament
09:33 Cocoa Press Chocolate Printer
11:00 Pumpkin Spice Filament
11:24 3DChameleon
11:55 PhotonCast!
#3Dprinting #RMRRF #RepRap
DISCLAIMER: Part of this video was sponsored by LDO Motors.
FTC Disclaimer: A percentage of sales is made through Affiliate links - วิทยาศาสตร์และเทคโนโลยี
I know LDO sponsored your video… but the fact that they’re gearing up to make a kit for a Positron excites me so much. I’ve wanted to make one for a while now, and a pre-set kit with a bit of support if I needed it sounds phenomenal. I’m looking forward to seeing what they come out with.
Wow didn't know that, it'd amazing, I have to move in a few months to another country and it'd be a great way to bring a 3d printer with me
Yeah, supporting that project and sponsoring this video. It appears they really understand the market.
I'm glad that Positron is featured here. But you are absolutely correct, it is a hassle to source everything. In my case even harder, when you do it from Germany.
LDO are doing a such a great job there.
Ive been wanting to see more about the Positron ever since I came across it a few months ago. Very interesting concept, i really hope to continue seeing it evolve.
Great to see some more Positron stuff, hope the kits come out soon!
The image from your hike at 1.41 is just over 3 km from where I sit. I'm glad you were able to visit Boulder as the flatness of Denver is not exciting.
The Flatirons were a beautiful hike and Boulder is also a really chill city!
@@CNCKitchen You've inspired me. I think I'm going to go for a hike to the same spot today as long as we don't have thunderstorms.
A different view in a live moving camera is available as "Boulder Pearl Street Live" from the channel "Boulder Flatiron Cam". Cheers!
Man I can't wait until a full positron kit available, that thing is so interesting.
I wonder what they'd price it at.
Chocolate printer? Now that's true CNC kitchen!
That PhotoCast idea is genious! It's one of these things that only once someone comes up with it, new possibilities come to mind as obvious as day.
Hey hey, my top 3 favorite things all in one video, hiking, spaceflight, and 3d printing!
Stefan, thanks so much for putting this together. This was a fantastic video to watch and ensures those of us who couldn’t attend aren’t missing a thing. Awesome job as usual!!!
RMRRF was an awesome experience to be a part of. A conversation at the Wuxn booth could've been the icing on the cake. Here's hoping for a 'take two' next time!
Love the look of the cocoa press! Hopefully it makes it way to Europe eventually can't wait to try it!
Essentium also makes a dual-core 25% carbon fiber filament called HTN-CF25. We use it a lot at work, it's insanely strong and rigid and prints as easily as PLA as long as you keep it dry. It'll be interesting to see if the new Phaetus filament is as good.
Kralyn is an absolute genius. Glad he found sponsors for Positron
Yeah. And LDO is positioning itself nicely in the niche of kit printer middleman for open-source printers.
@@Sembazuru I would also add the Orbiter to that mix - I feel like they are trying to say "we can make your design into a product", which is a win both for them (profit, and they also don't have to invent on their own) and for the designer (who gets to have their design manufactured without much of the hassle that would come with doing that alone on a small scale). It's quite smart to be honest.
This is easily my favorite content that you post. I love getting to see where the 3d printing technology is going! Please continue to do these if you can :D
The Polar printer definitely interests me the most. That they did it in Klipper is very encouraging for me.
Wouldn't an upside down Voron at high accelerations benefit from having the moving mass lower to the ground? It would potentially shake less and therefore allow for faster printing, right?
There are so many awesome ideas out in the world, I absolutely am in love with this community ever since. Thank you for your coverage!
You drove one of the nicest roads in colorado for sure! The whole 72/boulder highway loop is just amazing.
waou excellent, war gut..wiel spass , danke fur alles
the positron is so cool! you can just take it with you and prototype on the go!
Machinarium chocolate robots!!! ❤❤❤
ME AND MY FRIEND ARE THE GUYS AT 6 SECONDS!!!!
I want a positron just because!!!
Really cool! I just started printing this year. If I had know about this festival I would have gone. I am going to have to look up RepRap now. Thanks for sharing.
That's funny, the HeroMe popped up in my search results just before watching this vid. I think you must be giving it a bump.
LOOK ITS ME AT 0:06
Ah yes the obligatory german hike in the mountains. That´s what i like to hear from a fellow german!
That was a very good landing if you see how high the crosswords were! Crabbing like a pro👍
Stefan I enjoyed meeting you at RMRRF! It was an amazing chance to see so many 3D printing enthusiasts under one roof. I ordered a Voron R2 kit the moment I got home and my wife nearly ordered the chocolate printer. 😊 Thanks for your coverage of the show-you found some cool projects that I missed!
So glad to hear an update about Positron! Haven't heard much since their very first videos. Glad that such an innovative design is getting industry support!
Such a great show! Great overview of some of the highlights and super glad you got to experience the rockies while you were here!
Danke für die super Zusammenfassung und Auswahl und dann auch noch so zeitnah!
It was nice to see you at the festival, even though all I able to do was say how I appreciated you channel. Watching this video was better than actually going to the festival as far as finding out new information.
Love the coverage. It highlights some very interesting ideas.
Awesome! Thank you for the video!
Glad you got to see some of the countryside here in America.
The pritner with the rotating bed is printing the taco bell bag!
That was cool, had no idea some of this stuff was out there, so many thanks for covering this convention. It's provided alot of food for thought on future projects.
Man I kinda though this was going to be a little event and skipped to go racing instead but it looks like I should have made time, especially if I knew you were coming all this way. Glad you got to see the Rockies and hike a little too while you were here, even if it wasn't the best season for it.
Great complete review at RepRap Festival Thanks for sharing
The positron is simply the most promising 3D printer design since the original desktop printer
Love the travel montage! Something different, unique and cool!
Thank you for this report
Your ford was just being a ford. It's in its personality. It just wanted to take a break 💔
FOUND
ON
ROAD
DEAD
NEVER BUY A FORD HOSS
@@HotboiEngineeringbeat me to it 😂
You’re lucky the doors in the wheels didn’t fall off
FORD is all good as you start... It's coming back that's the issue. Driver Returns On Foot 😂
I've been using a 3rd-generation Hero Me on my ender 3 for quite some time. The part cooling is absurdly better than the stock ender 3 cooler. If I care about surface finish, I can print up to ~60° overhangs. If I don't care or am willing to do some sanding, it can go all the way to 75°. Bridges work great, too.
Also the ability to add/change something on the toolhead by just printing another piece of a standardised set is amazing.
@@Fifsson_ wow that sounds awesome
Please review more of the positron project! Can't wait for the kit to come out
I DIED when he said that his Found On the Road Dead (FORD) broke down!
With careful orientation of one of the two coloe co-extrusion filaments on the polar printer, you could get a vase mode print that is one color on the outside and another color on the inside.
Polar printers are so cool. I think there's a lot of potential there
you gonna make videos about positron soon? i like find this project very interesting.
Another project that i found on youtube some time ago and i didin't see more content about i'ts mulbot, have seen this in one video of you, and found very interesting.
Found you channel today. I enjoy 3D printing as well.
That 24x24” printer got my attention!
This was wonderful! Thanks for covering the event, I had no idea about some of these projects!
I hope you can come visit ERRF later this year, Last year had some really neat stuff!
i want to see more coverage on the roto casting project it was there last year and probably the most interesting project
PRUSA JUST UPLOADED THE INPUTSHAPING FIRMWARE!!!!!!!!
Great video as always, I really liked the Positron and Phaetus Filaments!
I saw you there thought that looks like the guy from CNC kitchen.... IT WAS!!! I wish I could have just said thanks for all your content!!! Some of this stuff I must have missed or maybe it was there on Sunday? There were a few really good ideas there!!
That belted voron. That's genius. I need one.
Nice info, thanks for sharing it :)
Thanks for the video! More stuff like this please. I loved it. Hopefully you won't have to fly as far for the next convention.
I'm definitely super glad to see that the advancements haven't stopped behind the 3d printing scenes! The year of the Bambu lab was a little discouraging for me. But the voron builds are super inspiring! Definitely what I want to do next!
Maybe a bit off topic here. I had this crazy idea to increase print strength. The weakest part of a print is the layer adhesion. What if we design a solid part. Print the first layers as normal. The perimeters are printed as normal. Now for the fill we skips about half of the layer lines in a tooth like pattern. The next layer is printed at double layer height filling the open space and sticking one layer height above the previous one. The principle is repeated for the full print. Hypotheses: The layers stick to both the bottom layer and half of the sides of the previous layer and as a result the print will be stronger. Can you test this or is this already tested?
Very Good Video
It was great seeing you there and glad you could come out. It's funny, the table I was at was in many of your shots but somehow you got it every time myself and booth mates weren't there. Though I did see my back once :P
It was very nice to meet you there! One of the things I found most interesting there was the work being done by Utility Research Lab. I also noticed quite a few printers with belt driven Z axis. So many Voron printers! The Voron printer in the Fabreeko booth with the EDM cut linear bearing rails was insane.
I have a like because I saw myself in your video!! I thought I recognized you, but I didn't want to be weird. I love your content!
I have a suggestion for a new Video.
Does recycled filament has the same advantage than annealed PLA?
Can you test filament from Recycling Fabrik and compare it to regular PLA?
That Voron printer at 6:47 would definitely be my dream build haha, love the form factor and colors!
I live in Loveland and didn't know this festival was going on! Totally will need to go next year!
I made that part cooling hotend :D. I love it
"My brand new Ford broke down" shit ain't that the truth.
LOL! good job FORD!
The paper bag 3D print has me weak lol
Oooh! I missed that construction filament!!! Definitely interested in seeing a review!
Love you
did you see the creepy denver airport horse?
we had a van break down in a town nearby and had to uber there to get a rental and get to a hotel
lots of interesting stuff in the area, we were planning on driving through, but the long weekend of waiting for repairs was a lot of fun.
The best job! :)
The at home rotomolding machine is such a cool idea! It would be cool to see it automated at some point.
The photon cast looks like an amazing machine for small businesses. How many cycles do you think a single printed mold can withstand before deformation?
You were so close to my home! Iowa
Moin, kannst du bitte mal das gst3d filament testen? Das ist richtig günstig, die Meinungen darüber spalten sich aber sehr. Mit deinen Premium Tests könnte man da eine klare Linie ziehen wofür es gut ist und wo seine Schwächen sind.
Mach weiter so! Deine Videos sind perfekt👍
"I get the feeling they did it mainly for the challenge"
You definitely wouldn't be wrong there 😅
Loveland lol. Would love to hav gone but ill hopefully be going to MRRF
Thanks for this interesting video on new an upcoming 3D printing tech. If I may suggest subjects for future videos, I'd like to see a review of Prusa PC with carbon fiber, and how it compares to PC Blend, and Polymax PC. Additionally I'd be very curious to see how the print settings, which produced the transparent and tough parts, compare to annealing in salt.
love that the cocoa printer uses a 0.8mm nozzle standard :)
I am both disappointed in humanity that pumpkin spice filament is a thing and in myself for not expecting that it would be a thing eventually
Love seeing my rockets in your video! you came really really close to being eaten btw. 3d printed shoes AND they were orange. if I thought you were a size 13 I just might have bitten you and made off with them :-) muahahahaha
i'm not surprised the ford did that lol
I was wondering, can you investigate if coating each layer with CA glue improves the layer adhesion?
please show more! I'm disappointed to not have known about this show as I'm 60 miles away and would like to have attended. Looking forward to more videos about the meetup. I thought of NASA technology being used to transfer power and signals via rotating interfaces to antennae etc. on satellites when I saw the polar rotating printer.
The Photoncast has my interest. At work, we use a large amount of one off insulators for high voltage and high current buss bars. Being able to coat them like this with a, insulating resin would greatly decrease our production time on prototypes.
Also, the Co Extrusion filament has always caught my attention. The ability to add such a strong material to a print would take most prints from testing ideas and low strength cover plates to more structural parts, again for low volume prototype equipment. The only problem so far is that every retraction requires a filament cut to sheer the core material.
That Ford got stage fright when a German sat behind it's wheel.
As soon as i saw the price of the 3dchameleon, i instantly bought it
I'm so sad I didn't get to go, my wife had an appendicitis the week before so my plans got binned. Looks like it was a lot of fun though.
Thank you Stephan, for another great video. 👏
The things I found most interesting from this one: The Cocoa Press and the Photon Cast. Very cool to make the effort to showcase the individual companies and their projects. I've seen similar videos that leave such details out.
* Unrelated, do you ride motorcycles & know who Valentino Rossi is? 🏍
You could pass for his doppelgänger or long lost brother. He's pretty chill and funny too. 😊
Drove up from New Mexico, super fun show, lots of mind blowing stuff, but the tpu voron actually broke my head, I didn’t know imput shaping has come that far
I thought I saw a guy that looked like you in Zack Freedman's latest video... it really was you!
8:33 if im not wrong, marlin supports rotary axis by default as well
Regarding the chocolate printer. Now this is cool. I see that they recommend their chocolate to be used and that it is formed to meet the shape needed for the printer. What will be unique here is that the chocolate would be much easier to recycle vs. filament. However, it would have to be melted down and put into a mold that shapes the chocolate correctly so it fits into the unit. Now I am not a baker so I do not know how many times chocolate can be remelted. So, initially printing something that fails, then to melt it down and reshape the chocolate into the needed shape for the printer and then, again, printing a new shape using the printer might be an issue as I am not sure how much melting and remelting of chocolate can be done.
I recently had an idea to make a printer with a spinning "lazy Susan" bed, but I did not know that thay already exist!