worked just fine for me, thank you for sharing this video. To those that this fix did not work for it's likely that you purchased the wrong drive, didn't secure the ribbon cables properly, had a defective pcb, and the cases where a non working Xbox was purchased it may have had a drive replaced by someone who didn't swap the pcb out. this method if done right on a unaltered unit works every time to resolve a read failure.
@Nathan Budisalovich Yes sure. I'll explain the items here:- Bottle with a plastic cap is "Isopropyl Alcohol". You can also use WD40. Its a cleaning agent Bottle with a needle is just a custom bottle. It contains FLUX which helps and aids the process of soldering. We have FLUX and ISOPROPYL ALCOHOL (VERY HIGH QUALITY) available in our online store. Feel free to check it. Now that you have mentioned we will stock FLUX custom bottle and it will be available to purchase from our online store.
How about instead of desoldering all the wires for the motor, JUST TAKE THE SAME MOTOR. Thats what i did. I just untangled the wires for the motor and put it with the new drive. Its honestly 100 times easier that way.
your replacing a drive not modding it. So no, as long as your not modding it to be able to play games that you downloaded from the internet then your fine. This is just one easy way to repair the xbox
Thanks So MUCH JAMES i had such a hard time fixing up an old disk drive and when i heard soldering in the site to buy this, I almost got an heart attack. btw the bezel (the xbox360 logo thing on the disc tray) is super easy to remove too. i hope i could repair my xbox just as easily.
i replaced my old dvd drive and did all your instruction in your video. when i managed to finish everything i tested and i can open the tray and eject the disc. however, the disc doesn't read it says "open tray" any advice pls.thank you
My DVD drive has been making a loud humming sound since as long as I remember, and now it's chewed up a disc, scratches in the middle now it won't read. I had it upright for ages but when it's sat on it's belly it's quiet. Will I need to swap out the DVD drive and do the PCB swap?
Thanks so much!! $100.00 dollars was my original budget but $115.00 total (new drive plus labor and shipping) isn't too bad, well it's a lot better than $180.00. I was afraid that I was going to have to buy a used Xbox 360 Slim and just switch the drives, so glad that's not the case. Thanks for being so cooperative with my financial issues. Awesome company you're running. Where can I find your shipping info and how can I wire the money to you after my new DG-16D4S drive comes in from Amazon?
very clear video thanks for sharing, i am buying a new drive the problem is that the Disc Tray is jammed it wont open correctly and everyone tells me to just buy a new drive the Real question is do i have to do all the soldering or i can just plug the power and SATA connections?
Carlos - READ THE TITLE !!! and at 00:10 in the introduction i explicitly mention we are not using Team-Xecuter or Maximus Tools. We are fixing the DVD Drive by PCB replacement process and NOT via DVDKey Extraction. We also have Drive Replacement tutorials by using DVDKey extraction and flashing. here is one:- X360SLIM Drive Replacement via TX UNLOCKED PCB & Stock fw using X360USB Pro v1 & CK3 Pro Please watch it in our channel. Hope this helps
I like your Rubbing Alcohol Method with the White cotton ball to make the Game Version load faster correctly on your Old Wii Drive and Xbox original drive and Xbox 360 Drive without Replacement Drivers?
Thank you so much, I recently replaced the drive in my 360 and it will only read dvds. I still have the old drive I’m going to try and switch the pcb and keep the new drive but run with the old pcb .
because the old chip has the DVD Key - XBOX360 system is not HOT Swapable meaning replacing with another drive does not going to do anything. You must replace the PCB as shown in the video
What kind of soldering iron and wire did you use again?I couldn't understand you on that part because got said it a little fast. I want to replace my dvd drive.
so my xbox has been on the fritz for a while and figured its either time for a new one or maybe ill give replacing the drive a go but i see all this talk with specific drives that people have in their console and quoting the model number which just leaves me dumbfounded does this matter too much or do i have to get a specific drive from you in relation to what is already installed in my console? currently have the limited edition gears of war 3 xbox 360 320gb console, dont really want to purchase the drive, go through the whole installation process only to find out its not a compatible drive
Thank you. we have made sure to provide complete information and tried our level best. Thank you again for your remarks. Please support us by 'Liking' our facebook page.
I have the same disc drive that you are referring to in this video. Can you attach the link to the drive i need to buy at your store?? I see a few and dont want to buy the wrong one. The drive on my old xbox is a Lite-On (DG-16D4S) 1071. Thanks!!
I have an issue with the dvd drive tray being off the rails and i need to realign it, but the tab you have to lift up on is broken. is there a way to reseat the tray?
@DaHxiBeSeRk that should be fine. It can get a bit pricey. First you need to send us your PCB => shipping will be about $12-$15 (You can simply use scissors and cut the PCB wires) Then once we receive your PCB, we will solder it onto the new Drive (So a brand new) => $150.00 then we will ship your new Drive with your PCB = $15.00 Total cost = $180.00 approx. Would you be happy with the costs ?
i replaced the dvd drive and put in the oringanl drive and still gets open tray. the disc won't spin but laser trys to read. thought it might be the pcb. also heard it might be the sata wire.
There are 2 different ways:- 1. PCB replacement (Requires Soldering) as shown in this video 2. Purchasing a Lite-On 9504 DVD Drive and flashing your DVDKey onto it as the PCB is unlocked so you can READ/WRITE and no soldering is required. We have lite-on 9504 DVD Drive available in our store. You can purchase it.
@@GameConsoleRepairs thanks man that was all I needed to know. I just bought a solder and this is gonna be my first time doing something like this smh 😩 a big nervous lol
if its broken you have to simply replace it with the new part. ideally you would want to purchase a complete new drive and carry out PCB replacement. It will save you all the hassels and you'll have a brand new DVD Drive.
Will this also fix "disk unrecognizeable" error on brand new orginal 360 games? Other orginal games that have wear and tear on them work just fine however brand new games don't. Sometimes I can get the drive to read the game enough to D/L it to the hard drive to see if that would help but I still need the disc to play the D/L'd game. So the problem is still there. Its not the game because the game will play on friends machines. Xbox/support is no help. Machine is past warranty.
Unfortunately I followed the instructions exactly as on the video, bought a new compatible drive, swapped the drive boards (old one on new drive) and it didn't make any difference. The console still won't read any discs. Turned out a complete waste of time and money.
i just got a new xbox slim disc drive model 9504 my xbox slim is model 1439 250gb with pcb 0401 i tryed swapping my old one on to new disc drive i even solder the right wired to it and for some reason when i press the eject button my pcb work turn the drive on even my xbox is still flashing the open tray when it wont open any help cause i really dont want to flash i dont have any flashing tools
Can I send my broken disk drive to you and you repair it for me? I've opened my xbox 360 plenty of times and taken my disk drive out so that's not an issue, for me my issue is the whole soldering procedure, I'm not comfortable doing it and I have no soldering skills. Basically what I'm trying to ask is, how much would it cost me to purchase one of your drives, then send my old drive to you to do the PBC Transfer? And then you for you to send me back my new fixed drive. What would be the total?
I paid less than that for my xbox 360 slim brand new. However, what if I were to buy a new drive from another source there is one on Amazon.com from a company called Brainydeal (it has a 4/5 rating with over 30 reviews so I trust it). It's the same exact drive for $60 bucks instead of $150. Then I could just simply send the new drive from them and my PCB to you for a much more appealing price. How much would you charge for the labor of replacing the PCB and shipping it back to me?
my old drive had an issue with the tray basically not opening, so I bought a replacement and have done exactly what u have done in this video. The tray now opens as it should but now it comes up as unrecognized disc and won't play fifa 16. Although that is the only game I've tested because its my friends xbox. Does anybody know what I could've done wrong?
if you are able to - Eject Tray - Close Tray thats somewhat explains that the PCB is functional otherwise if its dead you would be able to perform any operation.
you have two options:- 1. Replace the Laser Mechanism 2. Replace the DVD Drive We have video tutorials on both subjects as well as Repair Parts in our online store.
Hi Kevin Donovan Yes - the Drive Purchase Link is in the Description of the video. I cannot post a link here, TH-cam does not allow it. If have any questions, send us an email and I can forward you the link. Thank you
I'm having some trouble removing the wide ribbon cable in both my new and old drive. I noticed a convenient little mechanism on the other two, which made the removal very easy, but nothing budges on the wide one. Can anyone give me some tips or suggestions on how to solve this problem?
I installed the drive and the games and movies were working fine, I turned off the console and the next day the console wasn't recognizing that there was a disk inside of the drive. I apologize if I wasn't specific enough but if anyone could help that would be greatly appreciated.
11 years later video still helps, thanks brother 🙏
Glad it helped!
worked just fine for me, thank you for sharing this video. To those that this fix did not work for it's likely that you purchased the wrong drive, didn't secure the ribbon cables properly, had a defective pcb, and the cases where a non working Xbox was purchased it may have had a drive replaced by someone who didn't swap the pcb out. this method if done right on a unaltered unit works every time to resolve a read failure.
This is literally the perfect video, thank you this is exactly what i needed
This is probably the best tutorial yet on any system. Congrats.
Thank you so much for doing this video. Able to bring life to my 360. You made it so easy to do. How could you not like this video tutorial.
Absolutely Yes.
Mechanical aspects of all the DG-16D4S drives are the same. All we are doing is putting your OLD PCB onto the NEW Drive.
thank you so you ended up saving me $150 and gave me the knowledge necessary to fix it myself
@Nathan Budisalovich
Yes sure. I'll explain the items here:-
Bottle with a plastic cap is "Isopropyl Alcohol". You can also use WD40. Its a cleaning agent
Bottle with a needle is just a custom bottle. It contains FLUX which helps and aids the process of soldering.
We have FLUX and ISOPROPYL ALCOHOL (VERY HIGH QUALITY) available in our online store. Feel free to check it.
Now that you have mentioned we will stock FLUX custom bottle and it will be available to purchase from our online store.
do you really need to take off the protective foam?!
How about instead of desoldering all the wires for the motor, JUST TAKE THE SAME MOTOR. Thats what i did. I just untangled the wires for the motor and put it with the new drive. Its honestly 100 times easier that way.
Can you get banned on live like this?
your replacing a drive not modding it. So no, as long as your not modding it to be able to play games that you downloaded from the internet then your fine. This is just one easy way to repair the xbox
Its super EASY even if you don't know how. Just watch a couple vids on youtube on how to do it.
Thanks So MUCH JAMES i had such a hard time fixing up an old disk drive and when i heard soldering in the site to buy this, I almost got an heart attack. btw the bezel (the xbox360 logo thing on the disc tray) is super easy to remove too. i hope i could repair my xbox just as easily.
+jamesbones626 Im having a hard trying to understand what you're trying to say.
So are you saying you didnt have solder at all?
@Glen Everitt
Nope. Not required.
This is the full deal, once you replace the PCB nothing is required.
What were the two items in the bottle? It was a little hard to understand you because of the accent, though the video is a big help.
i replaced my old dvd drive and did all your instruction in your video. when i managed to finish everything i tested and i can open the tray and eject the disc. however, the disc doesn't read it says "open tray" any advice pls.thank you
same here oh man i hope this aint just make it 10 times worse
My DVD drive has been making a loud humming sound since as long as I remember, and now it's chewed up a disc, scratches in the middle now it won't read. I had it upright for ages but when it's sat on it's belly it's quiet. Will I need to swap out the DVD drive and do the PCB swap?
Super clear and accurate. Brilliant
Thanks so much!! $100.00 dollars was my original budget but $115.00 total (new drive plus labor and shipping) isn't too bad, well it's a lot better than $180.00. I was afraid that I was going to have to buy a used Xbox 360 Slim and just switch the drives, so glad that's not the case. Thanks for being so cooperative with my financial issues. Awesome company you're running. Where can I find your shipping info and how can I wire the money to you after my new DG-16D4S drive comes in from Amazon?
what a fantastic walkthrough! thanks!
Okee. Thank you for your quick reactions! I don't wanna spoil €60 on a new drive to find out that my pcb is the broken part haha
Exactly what I needed! Thanks!
very clear video thanks for sharing, i am buying a new drive the problem is that the Disc Tray is jammed it wont open correctly and everyone tells me to just buy a new drive the Real question is do i have to do all the soldering or i can just plug the power and SATA connections?
Carlos - READ THE TITLE !!!
and at 00:10 in the introduction i explicitly mention we are not using Team-Xecuter or Maximus Tools. We are fixing the DVD Drive by PCB replacement process and NOT via DVDKey Extraction. We also have Drive Replacement tutorials by using DVDKey extraction and flashing.
here is one:-
X360SLIM Drive Replacement via TX UNLOCKED PCB & Stock fw using X360USB Pro v1 & CK3 Pro
Please watch it in our channel.
Hope this helps
I like your Rubbing Alcohol Method with the White cotton ball to make the Game Version load faster correctly on your Old Wii Drive and Xbox original drive and Xbox 360 Drive without Replacement Drivers?
Soldering is the most preferred solution here
@Jesse Boyko
If its not opening the tray that means one of the wires is soldered correctly. Can you check your soldering one more time ?
Hi weetgeen
I meant
if the PCB is dead/Non-functional then you would NOT be able to
- Eject DVD Drive Tray
@fritzelsnitzel
Yes replacing with brand new drive will fix all these types of issues. GUARANTEED !!!!
we have fixed over 100 consoles.
Are the screws on the bottom of the dvd drive Phillips or Torx? Or does it vary?
Thank you so much, I recently replaced the drive in my 360 and it will only read dvds. I still have the old drive I’m going to try and switch the pcb and keep the new drive but run with the old pcb .
Glad I could help
@@GameConsoleRepairs it works great and plays movies and games now thanks again.
because the old chip has the DVD Key - XBOX360 system is not HOT Swapable meaning replacing with another drive does not going to do anything. You must replace the PCB as shown in the video
Did you replace PCB also ?
If not you must replace PCB also
Question, Why did you put the old chip in the new drive? Why not just put the whole DVD drive in the Xbox.
Shot in the dark...are u still around sir? If so I have a really good question for you
has anyone notice that its a 250gb slim (shiny case) at the start of the vid then at the end its a 4gb slim (matt case)
Can you just take out the old disc drive from the xbox and put the new one in or you just have to do it all in order.
What kind of soldering iron and wire did you use again?I couldn't understand you on that part because got said it a little fast. I want to replace my dvd drive.
THANKS A MILLION!!!!!!! IT WORKED!!!!!!!!
@DaHxiBeSeRk
yes that should be fine. we can do that for you.
Labour = $40.00 (incl. Installation & Testing)
Shipment = $15.00
Total = $55.00
so my xbox has been on the fritz for a while and figured its either time for a new one or maybe ill give replacing the drive a go but i see all this talk with specific drives that people have in their console and quoting the model number which just leaves me dumbfounded does this matter too much or do i have to get a specific drive from you in relation to what is already installed in my console?
currently have the limited edition gears of war 3 xbox 360 320gb console, dont really want to purchase the drive, go through the whole installation process only to find out its not a compatible drive
Thank you.
we have made sure to provide complete information and tried our level best.
Thank you again for your remarks.
Please support us by 'Liking' our facebook page.
This allows mw to play games? Or the dvd drive works only with movies and music?
I have the same disc drive that you are referring to in this video. Can you attach the link to the drive i need to buy at your store?? I see a few and dont want to buy the wrong one. The drive on my old xbox is a Lite-On (DG-16D4S) 1071. Thanks!!
I have an issue with the dvd drive tray being off the rails and i need to realign it, but the tab you have to lift up on is broken. is there a way to reseat the tray?
@DaHxiBeSeRk
that should be fine.
It can get a bit pricey.
First you need to send us your PCB => shipping will be about $12-$15
(You can simply use scissors and cut the PCB wires)
Then once we receive your PCB, we will solder it onto the new Drive (So a brand new) => $150.00
then we will ship your new Drive with your PCB = $15.00
Total cost = $180.00 approx.
Would you be happy with the costs ?
Why are you taking apart the DVD drive? Can't I just unplug the old drive and plug in a new one?
Yes you have to solder the wires.
Other ways are NOT recommended
How do you kow that the pcb board isn't the part that is broken and needs a replacement?
i did all this but it still has the open tray error? i followed your video exactly with a new drive and everything.
@samuel morris
We are the suppliers. You can purchase from our store.
GC-REPAIRS.
Men I replace my old disc drive from my old xbxo360 and does not work it's said put disc on a xbox360????need help
i replaced the dvd drive and put in the oringanl drive and still gets open tray. the disc won't spin but laser trys to read. thought it might be the pcb. also heard it might be the sata wire.
Hey man, I need your help !! if I do this will remain my Ixtreme LT3 firmware?
what type of solder are you using?
Do you have to sauter the wires or is there another way to do it?
@Matthew Hibbs
Yes we can. whereabouts are you located ?
hey man, nice video, i dont have my old drive so is there a way i can still make it work
Thank u, my bro!
yep you can
what do you mean the you can't just connected ? what can you not connect ?
Can you swap the motherboard with another xbox 360 slim drive?
it's not that simple
There are 2 different ways:-
1. PCB replacement (Requires Soldering) as shown in this video
2. Purchasing a Lite-On 9504 DVD Drive and flashing your DVDKey onto it as the PCB is unlocked so you can READ/WRITE and no soldering is required.
We have lite-on 9504 DVD Drive available in our store. You can purchase it.
what is the solder for don't you just need the soldering iron
Wait so was that the same iron you used to disconnect the wiring ?
Yes
@@GameConsoleRepairs thanks man that was all I needed to know. I just bought a solder and this is gonna be my first time doing something like this smh 😩 a big nervous lol
What DVD Drive should I buy for this ???
How would u know if it works. He hasnt turned it back on and tested it
Can i replace a drive that has the 0401 FW with a drive with 9504 firmware? My old DG-16D4S crapped out, but i cant find a new one with 0401 FW.
Would this work with a re-manufactured drive? I ordered what I though was a new one but got a refurbished one... any issue with that?
if its broken you have to simply replace it with the new part.
ideally you would want to purchase a complete new drive and carry out PCB replacement.
It will save you all the hassels and you'll have a brand new DVD Drive.
where can i get a liteon drive from pls?
What if my little mother board thing is broken?
Will this also fix "disk unrecognizeable" error on brand new orginal 360 games? Other orginal games that have wear and tear on them work just fine however brand new games don't. Sometimes I can get the drive to read the game enough to D/L it to the hard drive to see if that would help but I still need the disc to play the D/L'd game. So the problem is still there. Its not the game because the game will play on friends machines. Xbox/support is no help. Machine is past warranty.
what if i already threw away my old drive, and didnt take out the circuit board? am i completely screwed or what?
Unfortunately I followed the instructions exactly as on the video, bought a new compatible drive, swapped the drive boards (old one on new drive) and it didn't make any difference. The console still won't read any discs. Turned out a complete waste of time and money.
were did you order your drive from
Why can you just put the whole new one in. Instead of having to mess with the wires?
You need
- Flux
- Solder (60/40)
- Soldering Iron (30W-40W)
You can purchase Very high quality Flux and Solder from our online store also.
i just got a new xbox slim disc drive model 9504 my xbox slim is model 1439 250gb with pcb 0401 i tryed swapping my old one on to new disc drive i even solder the right wired to it and for some reason when i press the eject button my pcb work turn the drive on even my xbox is still flashing the open tray when it wont open any help cause i really dont want to flash i dont have any flashing tools
Can I send my broken disk drive to you and you repair it for me? I've opened my xbox 360 plenty of times and taken my disk drive out so that's not an issue, for me my issue is the whole soldering procedure, I'm not comfortable doing it and I have no soldering skills. Basically what I'm trying to ask is, how much would it cost me to purchase one of your drives, then send my old drive to you to do the PBC Transfer? And then you for you to send me back my new fixed drive. What would be the total?
i bought a new drive but i dont have the iron thing so i cant do that so maybe the shop can.
I paid less than that for my xbox 360 slim brand new. However, what if I were to buy a new drive from another source there is one on Amazon.com from a company called Brainydeal (it has a 4/5 rating with over 30 reviews so I trust it). It's the same exact drive for $60 bucks instead of $150. Then I could just simply send the new drive from them and my PCB to you for a much more appealing price. How much would you charge for the labor of replacing the PCB and shipping it back to me?
my old drive had an issue with the tray basically not opening, so I bought a replacement and have done exactly what u have done in this video. The tray now opens as it should but now it comes up as unrecognized disc and won't play fifa 16. Although that is the only game I've tested because its my friends xbox. Does anybody know what I could've done wrong?
Check your soldering job if not try another game
THANKYOU SOOOOO MUCH!!!!
Ok Cool.
Glad it helped you.
Can i just disconnect my old disc drive nd connect the new one in with out doing all this ?? Will my xbox work fine ??
i was wondering the same thing
Help anyone? Please answer this question
David Paez
No. You have to swap your pcb board.
if you are able to
- Eject Tray
- Close Tray
thats somewhat explains that the PCB is functional otherwise if its dead you would be able to perform any operation.
great video, helped alot. thank you sir :)
you have two options:-
1. Replace the Laser Mechanism
2. Replace the DVD Drive
We have video tutorials on both subjects as well as Repair Parts in our online store.
Can you guys do the sodoring for us if we sent you the drive?
very nice, but i got one for you! I just got an new dvd drive and it works but will not let me stay on line and play an game
Hi Kevin Donovan
Yes - the Drive Purchase Link is in the Description of the video.
I cannot post a link here, TH-cam does not allow it.
If have any questions, send us an email and I can forward you the link.
Thank you
Thank you so much
Any time
Good helpful video
Absolutely Yes.
ok
i cannot type it again.
Can you please read Description
the whole process is explained
Glad it helped you.
Please support us by 'Liking' our Facebook page.
Thank you for watching.
I'm having some trouble removing the wide ribbon cable in both my new and old drive. I noticed a convenient little mechanism on the other two, which made the removal very easy, but nothing budges on the wide one. Can anyone give me some tips or suggestions on how to solve this problem?
Thank you!
Do you have a video for a normal ps4
Yes have a video of a PS4 on our channel.
PS4 [CUH1102A] - First Generation - Full Restoration
very confusing
You mean you cannot play ONLINE (XBOX LIVE) ?
thank you very much
I installed the drive and the games and movies were working fine, I turned off the console and the next day the console wasn't recognizing that there was a disk inside of the drive. I apologize if I wasn't specific enough but if anyone could help that would be greatly appreciated.
The DVD drives they are selling are $94. I could get a used Xbox for that
Simply?