Big Rock 3S V3 - Small Problem
ฝัง
- เผยแพร่เมื่อ 1 เม.ย. 2021
- I decided to take out the Arrma Big Rock V3 3S to the dirt jumps. Earlier in the day, I had the rear driver's wheel off, trying to see if I could fit an Axial SCT Gravedigger wheels and tires, but the diameter of the wheel didn't quite fit around the A-arms of the truck. I tightened the nut, but didn't thread lock it back on, so when I got home, that is what I did.
Link to the Arrma Big Rock 3S V3 on Amazon: amzn.to/3gkmOZQ
Have you had any trouble with your wheels falling off from Arrma? Leave a comment below, either way!
Good bash! Too bad you were having a good ride! Thanks again for the video
I know, right! Thanks for watching!
Very nice bash bro👑👑👑
Thank you!
Nice bashing bro. That's an awesome spot.
Thanks man, I'm stoked it's so close to me.
Ive only seen arrmas in videos lose the wheels! hahaha... for me, its never happened. But I also address the problems within a few battery packs. So the typhon and mojave wheels like to fly off because the hex sits too close to the hub, and it will start to back the wheel nut off because the tire also hits the hub on the inside. you can help with the m2c +2mm thread hexes. I also think a small offset on the hexes would work as well, like the hotracing ones or GPM, instead of an expensive M2C part. and for the 3s lineup, you can always go to the typhon hexes or traxxas 17mm ones. 5353x for the traxxas. I like the traxxas ones with their threadlock. Overall, the Bigrock is quickly becoming my favorite car of all time, over my Maxx... and I thought that was impossible. I love that spot too, keep up the awesome content man!
Thanks so much for all the info! The Big Rock is one of my favorites as well!
Just recently found your videos as I just ordered my granite 4x4, love the vids keep it up. Maybe we could shred sometime as I’m not far from you.
Right on! Yeah, hit me up sometime....email is RCLEESD@GMAIL.COM
Coulda been worse! Nice terrain man.
Absolutely! Thank you!
Best upgrade I did was metal gpm cvd and dura hatchet belted tires
How was the tire upgrade? Any issues with the extra weight?
@@rcleesd
The tires are amazing. They are a bit heavier but WORTH IT to get rid of the ballooning.
I had already upgraded shocks though to some pretty legit big bores
hey Lee I went to this spot and was doing some really big sends going up that jump you are jumping down @ 0:42 with my Big Rock 4s. If you wanna have a super beast Big Rock you can try what I did. 4s Firma ESC 17tooth Robinson Racing Hardened Steel pinion. Recently tried the Granite ties and they have way more grip than the stock Ragnaroks.
Nice! Send me an email sometime if you wanna bash there! Rcleesd@gmail.com
I have a steel spur in my Granite and was thinking of putting on my Axial Gravedigger wheels and tires, but they didn't fit. I was planning to try the Granite tires, but I ran out of time as the sun was going down. Thanks for commenting and hit me up if you'd like to bash there sometime!
I have Granite tires on my Big Rock too and they are a ton better and make it look a lot more like a Monster Truck. Great vid Lee :)
@@TheflyingkiwiRC Thanks Shayne!
My dad has a BR 3s and back wheel falls off constantly since new.
Put on some blue locktite on the threading. That's should help...be sure to let it dry for at least 24 hours.
Great bashing dude! Always last love watching a big rock rip around
Thanks! It is such a fast and nimble rc truck!
Nice run! A lot of good natural ramps to jump. I havent heard anything too negative about the Big Rock and from your vid and others, I can see why many like it.
Overall, it's a durable and affordable rig!
Bummer. Never had my big rock wheel nuts fall off. I’ve seen enough TH-cam videos where they lose a wheel nut/hex that I try to always have spares with me. Good video though!
To be fair, this one was on really.tight from the factory, but I put it back on super tight, but should have put red thread lock. Thanks for watching and commenting!
😎👍
🤙
That's a sweet spot!! Nice driving too👌 btw are you stock and stock punch setting?
Thanks! Yep, completely stock at this point.
I have a big rock, it’s pretty disappointing how bad the steering is. Come on Arrma really. All slop.
I agree, they do have a lot of slop, but for the price I'm ok with it for bashing and the durability aspect. There is a ball bearing aluminum steering setup you can put in for about $25 that will take almost all of the slop out. Here is a link for that, if you are interested...www.amazon.com/dp/B07NNRXQ3T/ref=cm_sw_r_cp_apa_glc_fabc_HTWARF99GW1644627HZ2
@@rcleesd GPM years ago made pretty bad stuff is it better now? Would Hot Racing be a better option?
@@goreyboggs Hot Racing would be a better option, just a bit more expensive. Just depends on the budget and preference.