Single Turbo V6 Mustang | The Breakdown
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- Get your Odelfi Headlamp here! Coupon code YSB10 for 10% off your order!
odelfi.com/?re...
Manifolds-Free (use yours)
exhaust piping-$200-$250
T3 flange-$20
V-bands flange $25 each
New MLS exhaust gaskets-$30
New plugs-$50?
Couplers-$10-$20 each
IC piping-$10-$30 each
T bolt clamps-$3 each
Intercooler-$100-$200
Turbo-$200-$3000
T3 gasket -$5
Wastegate-$80 (Emusa)
Downpipe gasket-$5
Downpipe-(you do you)
Slim fans-$100 (if needed)
Battery relocation-$100-$150 (if needed)
Oil feed-$100
Oil drain-$100
#turbo #mustang #v6
Keep doing what you’re doing. You’re pretty much the main TH-camr for 3.8 owners as of right now and actually out interesting content!
🙏 I appreciate it
you need to check out "Mustang v6 Tech Support" 's channel! his builds are crazy
Oh this comment didn't age well. lol
@@colubrinedeucecreative
??
You need to start selling kits, much respect bro. I'm still in the building stage 😂
Lol watch my latest video
For the exhaust tubing, a lot of muffler shops may let you rifle through their scrap, and you can get a lot of it from salvage yards too, so there's no need to buy exhaust pipe kits.
more than 10 years ago I built a silver 01 in Florida. It made 623whp on an SC61 and a 75 shot. I miss it. I have to dig up the videos somewhere.
Please let us know when you find it
Single turbo v6 new edge make amazing drift cars,nothing like them
Boosted v6s are such a nice middle finger to the modding community. My coworker has a 3900 Impala thats about to be boosted. Nobody knows that the 3900 accepts LS parts so its going to be the ultimate sleeper.
Awesome builds I’m very excited to see the comparison of twin versus single on 3.8 and also I would be interested in a hot side ac turbo manifolds and what cold side intake couplers were those they looked nice right now I’m building a 3.8 on a nitrous express wet kit wanna see how that compares
All the cold side pieces are basic couplers and IC piping
Would 100% buy a kit or at least the manifolds. I have a take of turbo from a 5.9 Cummins I want to use for a build on my 3.8
That would be awesome
Bro bout to blow that mf at 20 psi lmao
How many ponies you pushing my dude and btw I love the mustang
Not sure yet
@@yellowshopbuilds which kit would or should I buy. Or what are you going with. In this. Specific car..lovely job.. nice
Clean build, I used your videos a lot when building mine. Did you use any of the factor O2 sensors in the exhaust at all or just the wideband? Also did you hook up your wideband to the sct tuner or just run it as just a gauge
Never used O2 sensors. Used the wideband as just a gauge.
have you had any complications not having o2 sensors?
@@yellowshopbuilds
No
Do you think if I ran the exhaust out the back and put the cats back on it would pass emissions?
Yeah
Nice work... Wonder how it'll compare in power and response to the twin turbo?!
I suppose we shall see! I have a feeling it'll make more power 🤷♂️
Awsome build keep it up bro
🙏
Great work!
Long live the V6 Mustang and the Churbo!!
If you made this as a turbo kit I would instantly buy your kit
I made a couple hot side kits a while back. Everybody said they would buy one until I actually made them, then apparently nobody had money. Needless to say I don't make them any more
@@yellowshopbuilds how much for a kit now
@jarredsmith883 I don't make them any more
General question.... ok.... WHERE IS THE RADIATOR FAN????
Attached to the radiator
How large are the turbos on the red car and if you'd share what are the dyno numbers?
Thanks
Turbos are small, off a 3000gt vr4. It made 305 to the wheels on 14psi
Are you able to delete both the O2 sensors? I was under the impression you needed the upstream one. I know absolutely nothing. I’m just looking for information.
I didn't use any of the OEM O2 sensors
@@yellowshopbuilds thanks
Dude ive been building open source speeduino ECU's for builds like this, Churbo kits for the V6 camaro /firebird and windsor 302 swaps for the V6 cars. Tuner Pros "self tune" feature on their paid version is tits on glass for turbo builds
Damn dude it Look so good.
🙏 I appreciate it
Need a limited slip diff
no blow off valve?
have you tried different location for the MAF? I heard that it's best to have a least some length of straight run upstream from the MAF?
This one did have stock injectors. I did not try different locations for the maf, I did not seem to have any issues with its location where it was
Hey man! I’m super interested in this, and was looking to build a turbod v6 myself. Is there anyway I could get in touch with you? Maybe obtain some information?
A lot of info in the mustang playlist, otherwise IG
Did you just weld the hot side pipes??
So if ditching the a/c, the pass side manifold can remain stock?
What maf did you use? And size
I have all the parts to put on my 3.8 mustang to turbo but I was wondering if you have had any problems with overheating? and if so how did you fix it?
The only time we had an overheating issue was because the coolant wasn't bled all the way. Otherwise, no issues
Did you ever get it tuned? How did you increase fuel?
Did not get this one tuned. It would fuel dump at fuel throttle on its own. Factory injectors are enough for low boost
My 3.8 single port i ran passenger side exhaust under the trans across up the driver side over the steering shaft under the manifold out to the side cut my powersteering pump down im almost finished with the build have a few odds and ends to tie but i do have some questions hopefully you are able to answer 1. The tiny sensor from your prior video with it taped infront of the maf sensor how did you deal with that 2.do you have a pt.# for the wideband 02 you used? Currently in the stage of doing the hoses gauges tightening everything up any tips or advice you could give would be appreciated i wiah i had stumbled upon your page a month ago when i started this haha
I just bought an AEM uego wideband and gauge kit.
As far as the sensor, you referring to the iat?
Yes the iat and i just got the same A/F gauge kit with the wideband today
I believe i need to swap my injectors aswell i have 14lb in there currently as there the stocks was gonna take the 21lb injectors from my 01 split port and put them in if necessary
As well did you use the handheld 7015 sct x4?
Running a 72mm turbo if you want to see pictures or videos let mw know how i can send them to you hoping to fire it up finally this thursday/friday
You most definitely need bigger injectors!
do you think I could heat the header and bend it?
I want to get in touch with you I want to turbo my car without losing ac
Okay..
@@yellowshopbuilds what's your insta
did you use the stock 7.5 rear end?
Stock rear end
What are you doing for fueling / injectors / fuel pump
It was stock. All stock
How did you flip the passenger header? mine doesn't flip, the shock strut tower is in the way.
Options
1: hammer the tower
2: hammer the manifold
3: modify the manifold
@@yellowshopbuilds do you think I could heat the header and bend it?
No
Where did you stick the 02 sensors??
In the trash
Where did you get your turbo kit from
I made it
Do u no if any one makes the pasnger header that clears on its own getting that header made custom from a shop is close two 700 bucks 😅🙏 I'm doing the same exact thing with a slight smaller turbo I plane on 9.5 10 lb of boost still the last car it was on was pushing 18 I would pay u to make the exhaust header u got on the passenger trying to keep ac I be in AZ
I have a kit for sale, DM me on IG
What headers you got I’m upgrading my dead uncle’s mustang with my son
Stock
@@yellowshopbuilds I had a brain fart I’m not car smart either so TH-cam been best friend I’m talking about the thing on top of the engine that said 3.8 fuel injection
I'm not sure what you're referring too, possibly the intake 🤷♂️ engine is stock
@@yellowshopbuilds yes the intake I know the engine is stock I’m trying to do the same thing for mine but finding the parts is a pain
You're trying to turbo your's? If so, just watch my Mustang playlist
how long they usually last?
That's not something you can put a time on
Shhheeeeeessshhh! 😎
What dimensions is the intercooler you used for them?
🤷♂️ I just bought one and made it work
@@yellowshopbuilds Fair enough, any idea what kinda turbo it is other than it being from CSRacing?
I'm trying to put together a list of parts is all 😅
I'm not sure what you're asking, it's a CX racing turbo
Stock internals? If so, how does the engine handle it?
Bone stock. Handles it fine
Any idea what kind of power it actually made?
Maybe 240 on 6psi 🤷♂️
That was a fast reply lmao
I try
how much hp your pushing?
Not sure
still selling the kits?
Negative
hey any kits for sale?
No
What size turbo did you use
T3 .63ar
thank you I see T3. 63. CS racing.. correct??
Yes
How much are your kits
And where can I get that intercooler
I don't make them any more
Amazon/eBay
So $1500 to $2000?
Probably not even that
can u sell me a kit of this?
I no longer offer the kits
Who tunes it?
Whoever. PRE tuned my twin turbo Mustang
What tuner setup
This Mustang wasn't tuned
Perfect... How long did it last at what psi
I ended up selling the car, the new owner pulled the turbo kit and put it in his car. Our first turbo V6 (un-tuned) lasted around 6 months at 8psi. Driven very hard too
0:19 them some ugly wheels, but for some reason I LOVE them.
Also, based on the first clip, poor thing needs an Eaton Tru-Trac.
What maf and size did you use?
Stock MAF