Volvo Diesel Engine 2.4D. Finishing what the manufacturer did not!
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- Small but useful modifications to Diesel Engines on Volvo.
1: Adding intake pipe bracket to reduce vibrations.
2: Fuel system covers for looks.
3: Protecting wiring loom and coolant hose from rubbing through.
Cover X 2: Bosch 1460 C97 003
Bracket: Volvo 30741409
Bolt X 2: Volvo 982775
I just checked my own car and the same bracket is missing! I never noticed any movement or noises within the engine bay due to this missing bracket but i'll pick up a new one and get it installed none the less. Thanks for the vid. I never would have known.
Nice.. I built those engines for 7 years.. It wasnt uncommon for that bracket to be forgotten, but the car assembly plant usually found it.
I have a question for you regarding my D5204T7 engine. Do you know what coolant they filled in? Mine has a yellow/brown colour. My car was build in March 2015.
@@knolshals5972 it's supposed to be the original blue one, for some reason on some of the cars it turns yellow
I have a Volvo V40 D4 r design 2.0 diesel 2014, are there known for a Fality EGR system from the factory? And the piston rings leaking oil and getting darned up?
Thank you so much for this video. It's still helping folks around the world with their Volvos.
Just purchased a xc70 D4 2014-Took off the cover to inspect - found the bracket in place.
Have ordered the two covers from Bosch.Fyg in Europe ( Norway ) the part number har been replaced
To read 005 insted of 003 - last 3 didges.
Your instructions videos are just great and based on those I now do all the service on my car so big thanks
+Helge Lassesen Great. Enjoy the Volvo.
Many thanks for mentioning that the part numbers have changed to 005,I was struggling to locate the 003 covers.Regards Wayne.
Great video (again). New style, now with music? I find it's better with no music (or less loud). Keep on sharing more very nice videos.
+Simon van Bentum Thx for the feedback. I will try my best.
Music like this makes it unwatchable for me .
+thiswan1 Do you watch it for music or useful info? It's not how I edit it's what I edit.
The point is I don't want ANY music there is no need IMHO it distracts from the subject especially if too loud.
+thiswan1 Will take your comment into consideration. Thx for the feedback.
I have just checked our car, 2015 XC60 D4AWD and yes our bracket is missing too. We also have the leaking vent nipple, that you picked up on your other video. Parts to order and get fitted, many thanks for you videos.
Thanks. Will use the bracket for wiring harness from now on. Im a mechanic at Volvo, and those parts worked great! Helps from vibrations! This will help customers be happy for sure.
That bracket installation should have been a call-back job performed by Volvo dealer right after they worked out that this bracket was needed to design.
Early Bird its a concern for all the Diesel Models? D5 too?
I'm not sure but it makes sense that if it was missing then it was fitted as a call-back job by Volvo. It wasn't designed later just for fun...
It was designed in first place, then removed to economize production and make some money in replacing intake pipes and saying " You know its a diesel, it rattles it shakes it has to be like that"
Sounds like a Chinese owned company. Finally
Buying a nice Volvo V70 2.4D Polestar on saturday. Will check this thing out immedietly. Thanks a bunch!
still using your videos in 2020 thanks keep going
Thanks for this video too. I just installed the bracket. They had forgotten to put it in at the factory :D
Keep up the good work with the tutorial videos!
Mine (2011 XC70 D5 enginge) has the clamp however the join (plastic part of the air intake) was partly broken around the clamp. I think because the massive vibration of the diesel engine. The oil was leaked around the broken part and on the hose-intake connection point as well. I fixed both of them with the gasket maker. It isn't aesthetic
but fixed the issue.
I dont own a volvo but found this good 👍👍
Hello Yuri, thanx again from Sweden, great videos.....
John
Will order this bracket ASAP and will check those pipes under the intake box. Thanks
Good job - especially the vibration part
So they sells a part that is missing from the factory. Great. Gonna check our d5 for that...
Also, stupidly placed wiring harnesses is a Volvo thing since ages. Wires bent at narrow angles, metal bracket retaining harnesses bolted to hot engine parts to cook insulators, if not too close to belts or fans, all of these are common since decades. It's a bit annoying but oddly satisfying to route everything back to something neat and tidy.
Just checked my D5/2016 (D5244T20. Bracket is missing too.Seems I have to collect parts now and find some free weekend. Say thanks to your friend. And thank you.
+Preston F For sure will pass. Glad this helps you guys.
Ok. Collecting took a loner time, but all parts has been installed with success. Thanks again.
+Preston F Great! Glad we could help.
volvosweden please tell me the type of engine/year car in the “what volvo forgot diesel” video. It shows a dipstick. Is it an older XC70 facelifted to MY14? Mine is 2011 and has no dipstick anymore... thanks.
Thank you Yuri, I really appreciate your Videos ..Absolutely helpful! I have a 2007 Volvo xc70..
Hi - I cant take out the knobs from the engine cover.. they cant be presses down. - any other tips? Looks like my engine cover was actually never open. I just got the car 2017 model D5 AWD.. any help? Also when should I change the timiming belt at how many kms? Thank you a lot!! 😊
Thanks for your very informative and well produced videos! I just got my new MY17 XC60 D4 and yes, part was missing. As I was warned by your video, I could check while at dealership (DARCARS - Rockville MD, thanks!). They were so kind to order the missing parts for me - so no costs for me.
Keep up the good work and if possible make videos about common (electrical) issues of the XC60 (up to MY17).
good work . more vids
Thank you very much, thats the only video to show how to remove that stupid black foam a head the motor !!!!!!!
Uh!! That is a fantastic placement of the oil filter. Why can't every model have that >:(
Addictive_LiquoriCe Subaru does!
I wish I could get one of those Volvo Diesels here in the US. Our government would rather we pollute the atmosphere with less efficient gasoline engines. I'm convinced it's a Big Oil Company conspiracy. Oh well, we'll all be driving some form of hybrid electric cars before too long.
David Sullivan i drive Volvo 2.4 diesel d5, Its a good car,but the diesel is expensive and taxes are high in Sweden for example.
Fantastic well done 🛠
Although I have the 2.4D the engine looks totally different. Mine is 2008. I guess this is the new modification.
Very, very good job.......!!!!!!!!!!!!
I like when you work under cover
Hi,
Where can I buy the protected materials: vibration material and form material?
What are they called in English?
Where can I buy them?
Thanks for useful video!
In the XC 60 D5 is monted is the first thing i chech when i bought it 😀
thanks for this video heads up
Great video but ditch the music.
Hi great video, can I ask what padded material did you use for round the wiring loam and around water pipe. And what silver material did you use for back of the box? Look forward to hearing back from you. Many thanks and kind regards.
Where did you buy that foam material and what is it called?
Thanks! just seen this missing on my 2012 D4 S60 I have ordered the bracket & bolts.
Can you provide links to what foam materials were used to cover the pipes & box to stop the rubbing and chafing? Please it would be a great help.
Hi,i would like to ask you for opinion or help.I have Volvo XC60 D5 2016,recently i got vibration ,which i feel on seats,but only when car is in Drive positon,and brake on,lets say on traffic light stop or when you stop.Also feel them if is on P or N positon.When drive,lets say is ok,normal.What could be problem?Thanks
Honestly hard to tell. Multiple reasons could be. Must be inspected in person for that.
i discovered the same problem with d5204t7 engine... i think it's the same bracket. I'm interested to know what did you use to protect hose (sort of foam) and air intake box ? thanks in advance and for your vid.
Cest piece que vous aver ajouter je peut ausi mes commander pour un. Volvo v60 2012 Diesel D4?
Volvosweden, great video thanks!!!
Does this problem include the four cylinder version D4 from 2015? that i have?
Why is the top of the long plastic hose oily?
I have a V60 d5 2013. Tgere is oil around injectors (not diesel) car runs fine no oil loss I put a glove on the oil filler hole, it blows up on idle. Does this engine have a PCV system? Thanks
Good job, thank you !
Hi great video. I search for the covers online but onky bringing up smaller diameter covers to cover center but nothing like the larger ones you have used that has full coverage. Can you help. Thanks.
Some of them come with that bracket from factory. Some don’t. Not sure why.
Thank you for this video, just serviced my XC60 D5 and noticed the bracket was missing, and also the M6 bolt securing the intake pipe at the back toward the bulkhead. I put a caphead in and tightened it up. What I did notice was some oil residue from below the intake pipe hose clip, looks old oil - have you seen this before ? Thought I had a burst pipe or somenting.
Well known problem with with the air intake pipe is oil leakage from the heater connector. Could you give any solution for that to avoid air intake pipe replacement (quite expensive and with no guarantee of long term success). I'm looking forward to more movies about XC60 and diesel engine. Greetings. Tom
+hea240 There is a solution and a video will be made. Keep an eye my friend.
volvosweden Thanks, I'll be waiting:)
Excellent.
Hi SIR! Do you recommend the 2.0 163hp diesel engine?
I do. I own one for 5 years now. Great engine.
Mine has 280.000km. Great car, much lower fuel consumption than d5 V70 II I had before
Awesome
Great video! I just wonder, in the video you could se another bracket point in the middle of the pipe, just above where the oily heater is connected, should it not be a screw or something there?
Hey fella, love your videos. Is this doable on the 2009 xc60. Are all your videos applicable to the 2009/10 xc60 D5. Keep making the vids.
Very good video! Could you please tell me what kind of rubber foam you use at 4:00 when you wrap the cable harnesses? Many thanks!
It's a Russian product. My friends video. Not sure where to get it.
Ok Thnks anyway!
Anyone know where you can get these parts. I am in the UK and cannot get them and told they are out of production now and I will never get them. I found the bracket on a US site but they don’t ship internationally.
Just found the same problem on my D5, ordered the parts from my local Volvo dealer and they arrived the following day.
Same story with V60 D6 plugin hybrid. Thanks Iuri. I did bought them and fit them on.
I bought them from Volvo Dartford main dealer
Fantastic, thanks so much. I’m just about to order these parts for my XC60 D4 AWD - one of the last 5 cylinder diesels in the UK. Regarding the dipstick, is the mounting point obvious, I can’t see anything - but that’s with the big pipe & box in the way, so I’m hoping that once it’s taken off then it will be obvious. Any hints. Thanks
Most dont have a physical oil dipstick as its electronic from the dash. I'd be surprised if you did have one
Great video, thanks for sharing! Question: my fan from the airco makes a lot of noise in the car, sounds like there are leaves in the housing. Do you have a solution?
You have to replace the blower motor. There is a video on my channel.
Volvo cost cutting for all to see. It's like Ford and saving money though not suppling adequate rust protection
Hi, first of all thank you so much for your videos, very useful and interesting.
I am a grateful owner of great XC60 2011 type D4 diesel 2.4 AWD
Now I have some questions:
1) where do you buy the parts that you change or install on your Volvo, have a particular website?
2) In the engine compartment there's some plastics on the sidelines over the wheels where is filled by dust and dry leaves, how to remove that plastics and clean? I have a fear to do a bad move and break some great plastic pins that hold in place that plastics covers.
3) I hear some noise inside the passenger door, I think that is a plastic moving inside, how to remove the panel?
4) I would to install a original Volvo XC60 back parking camera, but at the assistance workshop it's too much expansive, what about a self installation, is it too hard?
Thanks for any answers. Thanks again for your videos.
Bye
+Mario Coraggio Regarding the camera. You need to check with the dealer your XC60 is ready for it.
There will be a video coming. Keep an eye.
volvosweden
Yes my Volvo it's ready for install because it have a 7 inches monitor, thanks
However what about the other questions?
Thanks again
Yes, i follow this volvoswede guy and he is very good ! But this music in the video is annoying!
Sorry for the music.
Is it compatible with all Volvo 2.4 engine from 2015-2017 P3?
I can't find the parts anywhere and I'm in Sweden right now?
Do without the music
Volvo isnt a cheap car. Its really disappointing that they would design and engine with brackets and then in production leave those off. Very disappointed
Do u have a video on replacement of thermostat on D3-D5 engine? Have I 2011 D3 and struggling to find a video on that job
Sorry no
The funny is, I've got the bracket sitting in the rubber bush, but the bolts are gone... 🤯
Whats in the box ? could you remove it and avoid any problems ?
What material did you use around the wiring loom?
Where did you buy the Bosch "caps"? My local Volvo dealer can't find them in their system...
+J B Its my friends Diesel Volvo. He bought the covers in Russia.
Hello, Where can I buy part No. Bosch 1 460 C97 003, please. Thanks Petr
Hi where can i bay the bosch cover i can not find it
Yerai Romero www.drive2.com/l/471954372180312140/
Not the same!
Great video! What is the protective foam material called and where could I purchase some? Thanks!
At volvo ofc🤦♂️
Hi mate, can you tell me if there is a chance to fit full size spare wheel to XC60. Thanks
I think from factory there was only a space saver option
Why not put this parts in the factory?
Can you please tell me what kind of black tape you used there?
J A S P E R is kind is falling damping material
where can i buy the parts?
Did you notice a diffrent after this modification...less vibraton and sound???
The video is great but the music not. Thanks for the video anyway....
Can do without the music
Agreed why do they feel the need to add this distraction ?, stopping watching now at halfway through and adding a dislike.
I have a 2017 XC60 D4 with a 2.4L diesel engine, need to check about this bracket. That is very stupid of Volvo...
WHERE CAN I GET THE FUEL SYSTEM COVERS
Aldi
My ass
what model car is this?
+Jason Moyle 2014 XC70 D4
What's up with that loud music =/ there is not really any point of it, just enoying making me wonder what pop up window that darn noice comes from
why is this domain the factory? Not exactly cheap cars.
what type of xc70 do you have?
I own the T6. This video applies to diesel Volvo. A good friend of mine provided this.
volvosweden ok, i own a xc70 D5 2008 185hp that is the biggest diesel engine you get in norway. what engine is it in your car?
volvosweden are the Diesels available in Canada?
Burning oil No diesel Volvos here in North America
Hi!
I have on my Volvo V70 2010 2.4d engine system is required . Do u know what it is?
Have a nice day
You need to read codes.
666 likes now, btw ;)
Dump the techno dude
*Volvo wants to know your location*
Engine wash next time? 😉
bad idea...
Adam Budai why?
Björn Wildering the injectors use hight voltage....and if you short then out you can kill the ecu
Adam Budai why would they make a car that cant get wet? If its build to use in sweden?
Adam Budai Water has very low conductivity. Just cover the fuse boxes and you're safe.
Nice video as usual but.....that can't be your Volvo...or? The engine is way far to dirty. ;-)
For God's sake drop the music, man.
На драйве 2 это же видео только на русском языке
Ссылку? Хотя и тут все понятно было
Stäng av det jävla musik i bakgrunden tack 👎👎👎
Please stop talking when the music is playing, its very annoying.
so Volvo is REALLY in planned obsolescence....
No, just mistake in Factory
That is why Volvo are so cheap maybe?
Bullshit ?
Cheap, ( laughing ) okay
Hi,
Where can I buy the protected materials: vibration material and form material?
What are they called in English?
Where can I buy them?
Thanks for useful video!