I have been meaning to do this to my bike for a long time but I keep putting it off. Good to know they stay relatively clean. I think you may have started a new art category, painting with grease!!
Hey man it's a swing arm not a swin arm 😂 also when ever the swing arm is out always do the top and bottom shock mounts it's silly not to, and a quick tip here, spend 10 mins in the manual to find torque settings for any fixing your working on then write them down, it makes the job so much easier when you don't have to stop to try and find torque settings
![เปิดบ้าน พี่ตูน Bodyslam หลังใหม่คนแรก ที่ภูเก็ต l [Nickynachat]](http://i.ytimg.com/vi/flFwcmyDQSk/mqdefault.jpg)
I love that my drz400 has grease nipples, never need to remove or replace them! Just grease them every few rides
Those needle bearings can be a bit of a pain at times. Great video Steve 👍👍😎🤟
Thanks mate yeah I need to be more careful when working with them needle bearings lol.
I have been meaning to do this to my bike for a long time but I keep putting it off. Good to know they stay relatively clean. I think you may have started a new art category, painting with grease!!
The other side was a bit dry so I whoud definitely do yours.
Should service the top and bottom rear shock bearing while you got it apart. They are prone to seizing.
Thanks mate next video lol
Hey man it's a swing arm not a swin arm 😂 also when ever the swing arm is out always do the top and bottom shock mounts it's silly not to, and a quick tip here, spend 10 mins in the manual to find torque settings for any fixing your working on then write them down, it makes the job so much easier when you don't have to stop to try and find torque settings
Looks like a good place for a Zerk Fittings.
1st!🏆need to do this to my bike! Thanks for sharing.👍
It's a easy job thanks for watching
Thank you! I am from Brazil!
Thanks mate
Nice video man, very helpful!
Thanks mate appreciate the feedback
this side has the disks one on each side like the left side
Luv ya work bud keep up the good work 👌👌
Thanks mate
Thx for the video! Why did you cut the chain though?
Great, thanks!
Looking to do mine on my RM 125 Thanks👍
Good idea
Did your bike have shims for the swingarm or did it bolt it with none
if you can help me thank you I'm from Brazil
Crazy question but once all needle bearings are in place should there be any space between them or does that mean some are missing thank you
If you have lots of space I'd say you have some missing.
What's the torque spec on the ktm 2014 250sx swingarm nut? just kidding.
🤣😂 good one.
Do you take out the outer races? My buddy was trying to get them out and I don’t they come out
Only if you are replacing the bearing with a new one.
Google lmao
Some say there’s a space mine has no space there all touching all the way around where yours ?
this side has the disks one on each side like the left side
this side has the disks one on each side like the left side
this side has the disks one on each side like the left side
this side has the disks one on each side like the left side
this side has the disks one on each side like the left side