I had a lot of fun with my inflatable Sevylors. It was handy to have a boat in the back seat or trunk. I just used the oars. A motor took up too much space in the boat.
How's she goin'? Well now that has to be the best fishing set up on the planet!!! And it works too, the young fella caught a shark on it!!! Take care!!!
What would you recommend as a first mud mower and is there a mower that has a hydro transmission I don’t really like the belt drive stuff ? I’ve got 25 inch and 30 inch 4 wheeler tires to put on said mower
Hydro mowers take belts too. I would suggest maybe a Craftsman (there are a bunch out there) with a manual transmission. That is what i lean toward. That or what ever is cheapest. Thanks for watching and good luck with your build.
chud327 thanks for the advice and the good luck I’ll give updates as it goes I actually have a 3 bay shop with a lift welder basically everything so I should be able to build something crazy
@@chud327 washing it doesn’t do anything. The inserts need to be removed and the bladders washed out also. The material IS NOT made to withstand (salt) water period because you can wash it all you want and the zippers will still oxidize and corrode.
@@OutdoorswithFloridaSmokinJust FYI I know old post but I painted my frame and have Vaseline on my zippers and I fish exclusively in Florida .. 2 years and I am still rocking the XTS
I had a lot of fun with my inflatable Sevylors. It was handy to have a boat in the back seat or trunk. I just used the oars. A motor took up too much space in the boat.
That was an awesome job by that young man and an experience he won’t forget. Fantastic!
Yes, he loves fishing with his dad. Thanks for watching!!
Thanks for the video, the close shots were really appreciated.
Very welcome and thanks for watching!!
I really like the motor setup!
Resourcefulness runs in the family.
When is major Murray going to get painted?
Wow that's a slick little boat!!! Maybe the sharks think it's one if there kind? Idk possible, thanks for posting
Little man putting work in on that shark
Need a parts list this is awesome
Have you any experience with Countax tractors?
I have 2 and they are very well built (British quality), you should keep you’re eye out for one!
Makita cordless blower works well for airing up
Good tip and thanks for watching.
Now, the question is....how the heck can you access the rear bags, while on the water ?
I am not sure, it was the brother in laws, I never fished off of it, but thanks again for watching!!
How's she goin'? Well now that has to be the best fishing set up on the planet!!! And it works too, the young fella caught a shark on it!!! Take care!!!
How does your Colorado work in windy conditions?
That was the brother in laws and I never used it. I know he liked it, but I have no wind statistics ... Thanks for watching.
How did you construct your seat steering? I am using the stick method, and the stick keeps moving. Yours seems stable.
That was actually the brother in law's, I hope the video shows how he did it, I don't exactly remember. Thanks for watching.
Nephew has been taught well....reel down,. play em don't horse em. Hey Chud, I haven't seen the rail buggy project in a while. Still working for you?
How do you anchor while fishing?
He has an anchor off the front that winches up. Thanks for watching!
How did you mount the motor in the middle
he added a custom bracket, thanks for watching.
Thanks for the reply. Tight lines!
What would you recommend as a first mud mower and is there a mower that has a hydro transmission I don’t really like the belt drive stuff ?
I’ve got 25 inch and 30 inch 4 wheeler tires to put on said mower
Hydro mowers take belts too. I would suggest maybe a Craftsman (there are a bunch out there) with a manual transmission. That is what i lean toward. That or what ever is cheapest. Thanks for watching and good luck with your build.
chud327 thanks for the advice and the good luck I’ll give updates as it goes I actually have a 3 bay shop with a lift welder basically everything so I should be able to build something crazy
Im working on it. Have clark fork. Colorado went to 1,500$ from $500 last March. Too late. So i got it for $320.
Nice, thanks for watching
what shaft length is that trolling motor?
The Colorado requires a 36” shaft.
How can I ask you a few questions on this?
you can ask here or on Facebook "Chud Channel", thanks for watching.
Looks exactly like the Colorado brand boats
Might be the same and thanks for watching
"He's a water-stander" ?? ROFL at 6:51
Funny and thanks for watching.
Yes
Pretty cool.
Thanks so much and thanks for watching!!
I'll be there buddy
lookin in to getting one of these! and getting a trailer to haul it with😈
It worked really well and thanks for watching.
The Colorado is not made for salt water. They even tell you this in the paperwork.
Good point, he sure washed it good afterwards. Thanks for watching!!
@@chud327 washing it doesn’t do anything. The inserts need to be removed and the bladders washed out also. The material IS NOT made to withstand (salt) water period because you can wash it all you want and the zippers will still oxidize and corrode.
@@OutdoorswithFloridaSmokin thanks and it is ok, he moved on to better. Thanks for the tips.
@@OutdoorswithFloridaSmokinJust FYI I know old post but I painted my frame and have Vaseline on my zippers and I fish exclusively in Florida .. 2 years and I am still rocking the XTS
Use bugee cords on the motor bet it works better
Maybe and thanks for watching
That was cool
Thats a big shark
Lit
Can I please have a mower?👍
I am thinks of selling a couple... thanks for watching.
Who in the world disliked?
It's a free world anyway why bother them buddy?
roczhemer pestano it’s just the fact they they disliked this masterpiece
It's probably the verticle video, a lot of people hate that.
I think it was disliked before the video even started...
chud327 yeah most likely
Like who texts during a video lol jk
Make more lawnmower videos