ฝัง
- เผยแพร่เมื่อ 17 มี.ค. 2018
- Buy Losi mini 8ight rtr on Amazon amzn.to/2CIHxPG
Buy Integy Turnbuckle Wrench on Amazon amzn.to/2HGh7Bh
Welcome To Another Video By DJSPRC On How To Align Your RC Vehicle
Have A Comment Or Question? Just Ask...And I Actually Answer ( Not Like Some )
If You Like What You See Subscribe And Hit The Like Button
And Join The Group On Facebook
groups/djsprc/
Djsp Media Production - djsprc/makeitscalerc
Publication, reproduction or distribution of this film by any means is prohibited without prior consent of the channel operator.
Djsprc/makeitscalerc is not liable for any damages or loss due to the reproduction of any techniques displayed within our content.
Djsprc/makeitscalerc is an independent promoter of a great hobby and our content is intended for entertainment purposes only. - แนวปฏิบัติและการใช้ชีวิต
nice to see someone posting this, i have also been at it for a fairly long time, couple points ill add....you can buy alignment tools for rc cars most do it by eye, its fair to say most probably dont even know if their cars have adjustable turnbuckles or where there located so your info will likely be new info to some. . you should try to adjust them the same amount for both sides, sometimes they come uneven from the factory this can lead to the servo trim needing to be centered. calipers work for checking the distance between ball ends. adjust based on cars full weight on the tires. raising and lowering affects toe and camber depending on the car some vary a lot more than high end racers will. some will argue about using toe in, and you see them always complaining about high speed erratic handling car swerving etc though absolutely refuse to blame toe out and rather replace servos tires shocks etc etc before never considering toe regardless of how many wrecks. example:high speed run, toe out. acceleration toe out is reduced in 4wd csrs due to the wheels pulling against any slop in the steering becoming neutral or even slightly toe in depending on car and wear. once the car stop pulling hard nearing top speed this becomes more toe out again and unfortunately any ground imperfections can send it into the weeds very quickly. braking will also cause even more toe out as the front end dips lower then the front end is just fighting for which tire will get or loose traction first.i prefer a little toe in on my dirt track cars, vs more neutral toe on the pavement. generally i dont ever prefer toe out, though this might be good for small racetracks with a lot of curves and short straights. in the end there are many things that affect handling probably more so in a rc than a 1to1
I just got the Tenacity TT with the same issue, right out of the box. I noted also the spektrum servo is not solid, may require a replacement. Very happy with your video, definitely works for me. Thanks
Best video I've watched on it so far actually doing it instead of just talking about it
Thank you! All straight now.
A little toe out is great on these trucks. Improves steering response and makes them less understeery.
it also makes them twitchy trying to run a straight line
Québécois accent for sure ! Nice video patron !
Thanks man!
Toe in and out have different applications. It depends on the track you're going to try or even on your driving style. For you it's clear that you prefer a neutral position between those two options, but keep in mind that there is no right or wrong, it's all about preferences 😉 Of course there are also recommended ranges on which we should work for each configuration
Thank you
is the toe setting right and left must be the same centimeter? Using sketmatch?
Toe in or toe out depends on how fast you want it to turn left or right?
i always get confused by what turning direction does what? I could be turning but not sure if it is in or out.. what's a simple way to remember?
A little more difficult on my 1/8 🤣
Why does my car zig-zag, what do I need to adjust 110 scale Fox Edition made by Traxxas
Hello friend, how are you and happy new year. Hey, I have a hyper go car and I wanted to know how to balance the tires since they go a little to the right and not in a straight line. What could I do? Please, I need help if it's not too much trouble. ❤
Happy new year. If you need to balance your tires, I do have a video on that. I will link it below.
th-cam.com/video/_Spkh9JagPU/w-d-xo.htmlsi=X3CI81WboBivCJ93
Hello I have the same problem but with the overmax monster 3.0 do you know how I can fix it?
Sorry for the late reply if your links are adjustable you should be able to realign your vehicle if they’re not adjustable you will need to change them to make them adjustable
Will this upgrade, and or ,adjustment,work on most Traxxas vehicles.
if it has adjustable turnbuckles
when i did this the tires were loose!!! :((
Why does the transmitter need to be on for this?
That way you know your servo is on the zero position
Do both remote and car need to stay on when doing this?
How do u know which way too turn backwards or forwards
On which way you need to turn it depends how your alignment is off. You can do it with the vehicle on and remote, but be careful not to put too much pressure to break any gears in your servo. I would make sure that your trim on your remote is centred turn everything on the servo will centre itself then I would turn everything off and do the alignment
My rc monster truck had unusual vibration when i when i run it in full throttle while i am hanging it in my hand. The tires should supposed to be normally rotating without anu vibrations. But now after 1st run, it has a vertical vibrations which was not present at the beginning. There os something wrong with this. Please help me.
It would be possible that you might have water in your wheels if that’s the case that will create a lot of vibration. If that’s not the case I would suggest removing the wheels and see if you still have that vibration if you do it might be your driveshaft
@@djsprc thank you so much. There was plenty of water inside my tires. My RC is in a good shape right now. Thank you so much for the help. 👍👍😇
Thank you . I m still afraid to mess it up but if I count the turns I can always go back but I ll get it right . Mines brand new and reminds me of girls with big boobs where the nips are pointing to the side 😂
Where can I get that tool? To align the tires? . Please help
You’re a local hobby shop or you can look on Amazon
You don't even have the car turned on let alone a battery in it, you have to have the car turned on to adjust,
Yeah he said as the first step to adjust the trim on the remote but that's kind of irrelevant if it's not powered on🤦♂️
My car tires turn left when I turn it on. I adjusted my trim on my transmitter and it still turns left when i turn it on would you happen to know what is wrong with it?
Did you change the servo by any chance if you did it may not be aligned correctly or you might have an issue with your remote or the receiver if you did change the servo I will suggest removing the horn turn the vehicle on the servo should centre itself then you’ll be able to put your horn back on
I don't know what kind of RC you have but I had a Traxxas Bandit for a while every time I turn it on the wheels would go all the way left I let it sit for a couple days and tried it again and they went straight I guess it's just a glitch or something
Remove horn, power up servo, center steering trim, and then reinstall horn so the wheels are straight
Mine is doing that right now and the turnbuckle isnt ajustable
Make sure you’re steering trim is at zero on your remote. The other thing you could do is remove your staring from the servo make sure everything‘s at zero and realign that way
@@djsprc thanks
One gets tighter. Other gets looser.. how does that make it push out?
Huh?? They are 2 different pieces lol
One side is reverse threaded
The front tires should have a little bit of toe in also
Andres Villagomez If you want to yes but you don’t really need to just make sure the back is
Video is not clear bro
You have that all out of whack
Was hoping for something scientific here.
bad volume
Big deal
Hey man i tríed to do this in my wltoys 124019 but still going to the right when i pull the gas 🥲
Possibility your trim on your radio might be off I would check that to make sure.