8:15 I only see Flash Button and do not have the BUILD AND FLASH option on this configuration latest configurator iam using I'm using v1. 6.1.. What do I do? Anyone?
My main radio is the tx16s MK11 with elrs built in. On my 2 whoops I was using a cheapo radio, kinda sucked. So the Jumper T lite v2 4 in 1 is now my whoop radio. When my external elrs module gets here it'll be a backup radio for my micros and racer fpv quadcopters. Really would have preferred a momentary switch, but so far I'm very happy with it.
I bought a t-lite V2 but it does not have the SD card slot. There is a slot in the plastic case, but when I try to insert an SD card in there it just falls into the case and disappears.
@@gliderriderI am trying to get into the hobby, but it is very confusing. I don't understand why I need to manually flash software to my controller. And the instructions don't work, because the controller I bought does not seem to have any storage. At least I haven't been able to find it neither in software nor hardware.
Thanks. I noticed flashing breaks it. Wanted to get rid of heli-tab, but i can wait till next relrase. The rubber coating seems to ne silicone based, as nothing sticks to it. No epoxy, glue or cyanoacetate. I scratched a pad clear to glue on some grip pads. Works great. Neat little transmitter for in the backpack.
The v2 ,when bricked shows a " no SD card" u have to watch the video on, how to unbrick jumper T Pro, u have to take the back out and press the tiny button together with the 2 button and the start together to enter firmware update
If you're 100% certain you have the same revision of firmware and the identical bind phrase, you'll need to open an issue on the ELRS github. I've never had a failure to bind when the firmware is the same on both tx/rx and the bind phrase is the same. I don't know what your bind phrase is, but maybe try something simple to test like 123.
I followed this and many other guides, but i cannot get this transmitter to work. The one thing that stands out is my Internal RF will only allow me to select XJT D16 and my External RF is set to CRSF. I would have thought the internal RF could be set to CRSF ?
Great review John it's kind of hit and miss for me too they had a long time before the last one to V2 to come up with better switch and button placement. As for the module adapter I'm a little standoffish also lol. And standoffs going to be the really only way you can correct that take care
I have a Jumper T lite v2 Elrs version, on my transmiter on tools menu if i press enter to load the Express Elr, i get a error >>Script panic not enough memory
The v2 DOSENT HAVE SD CARD READER, If u get a " no sd card " it means u brick the controller, to unbrick jumper T lite v2 , JUST WATCH THE VIDEO, HOW TO UNBRICK JUMPER T PRO, but use the settings for the Jumper t lite v2
I’m flying the T-lite V1 with my DLG. I swapped in a momentary switch and am a pincher. Its been the perfect DLG radio (small and light).
Please how see in theJumper t lite the trasmission power?... in the video is no clear the imagen.
I dont have a card slot. Do u have a video soley for the JP 4in1 update.
8:15 I only see Flash Button and do not have the BUILD AND FLASH option on this configuration latest configurator iam using I'm using v1. 6.1.. What do I do? Anyone?
ELRS removed local builds a few revisions back. Now, all binaries are just downloaded from the cloud and flashed.
I want the Jumper tx…. Great review!
Its difficult to update version of jumper tlite v2
I have version 2.7.0
My main radio is the tx16s MK11 with elrs built in. On my 2 whoops I was using a cheapo radio, kinda sucked. So the Jumper T lite v2 4 in 1 is now my whoop radio. When my external elrs module gets here it'll be a backup radio for my micros and racer fpv quadcopters. Really would have preferred a momentary switch, but so far I'm very happy with it.
Good to know. Thanks for the first hand info.
Olá, comprei um desse versão Elrs, qual melhor versão posso atualizar hoje?
I have the original jumper t-lite, which model should I buy to support ExpressLRS?
I bought a t-lite V2 but it does not have the SD card slot. There is a slot in the plastic case, but when I try to insert an SD card in there it just falls into the case and disappears.
@AlexLeeping It doesn't
@AlexLeeping
I tried different cables.
I also disassembled the radio and found no SD card slot on the PCB.
It seems this t-lite radio has no storage.
@AlexLeeping OK, so there is a memory chip soldered to the device? I will try again to find the correct driver
After being away from the hobby for a decade, I have no idea what’s going on here. I can’t imagine someone new to the hobby.
@@gliderriderI am trying to get into the hobby, but it is very confusing. I don't understand why I need to manually flash software to my controller. And the instructions don't work, because the controller I bought does not seem to have any storage. At least I haven't been able to find it neither in software nor hardware.
Thanks. I noticed flashing breaks it. Wanted to get rid of heli-tab, but i can wait till next relrase.
The rubber coating seems to ne silicone based, as nothing sticks to it. No epoxy, glue or cyanoacetate. I scratched a pad clear to glue on some grip pads. Works great.
Neat little transmitter for in the backpack.
The v2 ,when bricked shows a " no SD card" u have to watch the video on, how to unbrick jumper T Pro, u have to take the back out and press the tiny button together with the 2 button and the start together to enter firmware update
I have de same tx an RX but I can't bind, same version of ELRS and bind phrase. Help me
If you're 100% certain you have the same revision of firmware and the identical bind phrase, you'll need to open an issue on the ELRS github. I've never had a failure to bind when the firmware is the same on both tx/rx and the bind phrase is the same.
I don't know what your bind phrase is, but maybe try something simple to test like 123.
I followed this and many other guides, but i cannot get this transmitter to work. The one thing that stands out is my Internal RF will only allow me to select XJT D16 and my External RF is set to CRSF. I would have thought the internal RF could be set to CRSF ?
Did you look in your system->hardware page and ensure the Internal module is set to CRSF?
I want the Jumper T-Lite!
Great review John it's kind of hit and miss for me too they had a long time before the last one to V2 to come up with better switch and button placement. As for the module adapter I'm a little standoffish also lol. And standoffs going to be the really only way you can correct that take care
I agree, they had an opportunity to improve like RM did with Zorro. Shame they didn't make a few updates to the ergonomics.
is it normal that my jumper dont have a ad slot?
The v2 doesn't have SD card reader, it has 500mgb internal storage more than enough
Whatever you do do not delete or touch the F: drive
my Serical VCP wont show up. I only have joystick and SD/ pls help
U need to flash that again, do not delete the F: drive or touch it
I have a Jumper T lite v2 Elrs version, on my transmiter on tools menu if i press enter to load the Express Elr, i get a error >>Script panic not enough memory
If i habe the Elts Version do i need a extra Transmitter?
Thanks for sharing! I hope ELRS and this radio get to Europe too.
You can't order it from Banggood with delivery address in Europe?
@@RCVideoReviews Sure we can(with all the taxes...)!
But I want regular suppliers and guarentees here, makes it even more accessable :-)
@@rctips1763 and the price will be higher then :P
Looks like it would be great to use while kicking back on the sim for thumbers.
Yeah, ELRS has a BT Joystick option. So this could be a very good SIM radio.
mine always says failed at the end
Then you're doing something wrong.
im stuck at loading
Same ....Didi you fixed it?
It will be great if you review the Matek PWM receiver 👍👍
I need to get them installed in planes. Soon...
great Video, Thx
You're welcome.
The v2 DOSENT HAVE SD CARD READER, If u get a " no sd card " it means u brick the controller, to unbrick jumper T lite v2 , JUST WATCH THE VIDEO, HOW TO UNBRICK JUMPER T PRO, but use the settings for the Jumper t lite v2