Changchai 12 HP Chinese diesel engine
ฝัง
- เผยแพร่เมื่อ 25 ม.ค. 2014
- Changchai L12NM horizontal diesel engine. Running on temporary wood frame. Will eventually drive a YANAN MINDONG 6.12 kw. 240 volt 50 hz 1 phase alt head, for standby power to the home, through a manual transfer switch. Alternator is brushless and AVR controlled. Engine will be electronic governed. Engine start 2.03
This sounds so nice!!!!
At the landscaping company I work for we have bought a few of the off band chinese motors at harbor fright over the past 5 years, they have been great with no failures at 1/3 the cost of a honda.
Every Honda I have bought has performed flawlessly until it becomes obsolete.
in 6 months whenever they introduce a newer VTEC, VVL, or VVTI system !! Legend has it Honda also making supercharged engines for the garage application!
Huh, kinda reminds me of a lister sr1, thats pretty neat
I like the sound of this thing
Yeah, when driving the generator, it sometimes sounds like it wants to have a little rest and let someone else do the work, especially if the wife turns on an electric fan heater...………..grunnnnnnnnnt.
I have a r 180. Ive put so many hrs on it that its not even funny. Yes i rebuilt it but i bought it ten years ago and the cylinder still had cross hatch pattern in the cylinder wall. Just barely a sign of a ring groove at the top. I just re ringed it with new rod bearing and head gasket. She putters like new. The smoke smells awesome runnin vegitable oil in it. hehe love that little engine. Id give anything to get my hands on a couple more! I dont much care fore chinese products but i gotta say these engines are the coolest thing. Im retiring it from being an APU on my semi and am going to use it for a belt driven water pump to fill fish ponds now. Should save me on fuel. Itll run 6-8 hrs on the aprox 1.5 gal tank. Its well prooven far as im concerned. Thats my chinese diesel story.
Mine is only about three years old now, but it fires immediately on the crank, or starter. It clatters and rumbles but it is still going. Its no Yanmar or Kubota, but then its not meant to be. You are right, there's a heap of Chinese stuff out there that's not much good, but these rough old things just keep going.
lets series and parallel them into a V8 configuration and put American muscle cars to shame!
I’ve been looking for the R175 or bigger models, checkout my small diesel vids on my channel, i completely rebuilt a old new stock R165 OEM Changfa Diesel , Nice engine you have i like the paint job!
I grow up seeing these engines beat hard and abused, they are rock solid, ppl use it to tow xx tons of bricks and rocks, sands... yes, overloading is very common in China, something can't be imagined in the US with something only 12HP ...
Lets add K&N full flow filterchargers, a Yoshimura full flow exhaust, Carillo rod, Wiseco Piston, a decent Oil cooler to the system and watch her rock and roll !
heck maybe add titanium valve retainers and vale springs and lighter camshaft lobes and a lighter flywheel as well so we can squeeze more usable rpms with less effort
Haha, it'd rock and roll itself into a million bits.......
Don't forget a turbo or supercharger and intercooler.
Somebody call Big Chief. I smell a challenge.
Looks like it was designed in about 1905... sounds like it too! We’ll see if these things are still going 112 years from now!
in 110years China will make these for under $50USD and they will come with VVL and VTI as a standard option!
Hi again PatrickThe Baptist. I personally don't run this one on WVO/WMO, but there are people who have done so, and I think, with success. I believe they will run on pretty much anything as long as its sufficiently processed. I think that 'blends' are the most common form for these engines. The genny( which I still have to upload vid 5, running with a load ) is mainly for standby, but when I move to 'stand alone' eventually, it will probably get a bit more use. Up til now its done about 107 Hrs without a hiccup. The engine is rated at 12HP/1Hr, 11HP/Cont and drives a 6.12 kva Stamford copy genhead. 4.5-4.6 kw and it will run all day with a clear exhaust, but if you get up to about 5kw or better, she starts to grunt a bit, and show a slight haze from the exhaust. With regular Summer diesel and about 2.5kw of load, it will use about 600ml of fuel, per hour from its 8 lt tank.
One point of weakness with these engines, is their cooling system. At some point, I will change it to an automotive style radiator, but with a bit of careful preparation ( Jap bearings in fan and tensioner, Dayco belt, new PROPER gaskets for rad to block and careful sealing and tightening down of the rad bolts, it has given no issues or leaks, even in 40 deg Celcius + days.
With these engines, in my experience ( which isn't much ) a bit of pre use fettling goes a long way towards a reliable engine.
Anyway, cheers and God bless from Downunder,
Mike.
Excellent
маховик хороший ,можно менять шкивы с большего на меньший и на оборот
very cool nice
Good engine!
Its been a good engine. Its only done a couple of hundred hours, but still performs and sounds the same as the day I got it. Ideally, you would want to live out of town with one of these ( pretty noisy ).
Cost how much?
To buy in Australia, about $900, but that is 4 years ago.
I don't know why many people from outside Asia hate Chinese diesel, I think Chinese diesel is pretty good because i have it too! I have a 24 hp Jiangdong engine for rice milling, the engine is pretty good and lasts almost 10 years, but that doesn't mean there is no broken part, But I think it's okay because I bought it at a cheap price so I get not as good quality as Yanmar, but if I buy Yanmar I have to save more money haha
Where can I find one if these? I need something like this for a DC generator for my 24v system.
Looks like you got a good engine.
So far its been OK, but I've had to do a few things to it, to get it there.
This Changchai goes hard!!!
Thanks Scott. How's them red trucks going? Hahaha.
@@harrothepilot whens the merch dropping?
@@mingesandwich Tell Scrotom I’ll kick his arse when he gets home!
Nice
There are many companies making any given model/design single cylinder engine in China. The quality probably varies tremendously between companies. So, it pays to do your research into the company and it's production methods and quality control standards. Today many Chinese industrial products represent increadible value for the money... not unlikely that we will some day look upon this a "golden age" of industrial product production...with costs being insanely low.
Nise videos
Nothing but old Fairbanks motor made in late 1860- or after.
Nice looking engine,,,, I’ve seen some comments about Chinese engines being junk,,,,if they were complete and total junk they’d have to shut the Chinese factory down that makes them as nobody would ever buy them,,,,I have an old McCallaugh( probably spelled wrong) yellow generator I bought from Tsc with an 11 hp Chonda,,,, Honda clone The thing is a champ I’m going to have to figure out what I’m going to do with the engine whenever the gen head wears out,,, that old 11 hp engine is a strong runner doesn’t use hardly a drop of oil very heavy duty If I had your diesel engine I’d probably look around for an older Ford garden tractor or an older John Deere that takes the horizontal shaft engines and put your Chinese job right on it
Cool. Yeah, it seems to be all the rubbish they hang off the engine, that tends to fail. The 'long' engine itself is pretty bullet proof. A lot of them see duty in some pretty engine unfriendly environments.
I LOVE single USE engines 👍
As in use it one time and it's shit
NeatO, so can you run it on waste oil? I'm looking to build a genny for my off grid living at some point and run it on waste oil..
کیسے ملے گا 03206795102 میرا نمبر
Yep
Rana saha
How and where did you manage to find/buy this engine
Try Alibaba or Madeinchina.com
Hmmm. Diesel powered go-kart or mini bike? Why isn't their a Diesel side by side. You could have a mini stump puller
2:10 thank me
I cant seem to get one over here to the USA. And im in driving range of New Orleans Port.
Try Alibaba.
TRY TO RUNIT SIDE BY SIDE WITH KUBOTA OR YANMAR OF JAPAN YOU WILL SEE AND FEEL THE DIFFERENCE.
You will pay for it as well.
Where and how much did you buy it for
Ce preț are un motor, ?si de unde se poate procura?
Changchai brand diesel single cylinder engine can easily use more than 10 years
Noisy and clattery and replace bearings on fan and idler pulley, and gaskets, but still going and easy to start hot or cold.
Hi Harrothepilot, I have a few brand new Yanmar TF-120DI Euro III compliant 12HP engines. Let me know if you'd be interested in them, as I'm willing to part with them.
Made in Jiangsu Province
Sirji 12hp me kitna cc ka engine hota h
Viene con arranque electrico??
40 years ago, there was a big demand for something like that. Now, you can't pump water out of a river or lake.
A good point, depending on where you live, of course. They would chug away for hours on end doing just that.
Where can i buy one?
Es da fuel element mil skda a
Is it water cooled? Is that a radiator at 1:31, or an oil cooler?
No,it cooled with "liquid Nitrogen" ! ! ! ! ! ! at _375 degree Centigrade ! ! ! ! ! ! !
Why am i watching this?
how much cost it is
Bonjour, Nou utilisons la marque JD dans notre atelier depuis plus de 9 ans. Nou voulons avoir a notre disposition des pieces de rechange en tout temps. Actuellement nous avon besoin d'une pompe a eau dont nous sommes a la recherche depuis plus d'un mois pour notre moteur JD1115 24 HP. Comment pouvez-vous nous aider?
Brother Jf 170 ke parts milenge kya India mein. Part not available in India you can send parts India
Hi, smallest China Diesel I've seen for sale is a 2.2 Kilowatt. I might be wrong on the math, but I think it is about 3 hp. I wonder if that might be the smallest production diesel? Has anyone heard, or seen of smaller than that? Thanks
Thats a pretty small engine. I have heard of 4 HP, but there could well be smaller diesels out there.
@@harrothepilot Yes, that's for sure 196cc $258 USD on eBay. It sold about a week ago. Almost bought it due to it being so small, LoL. Looking back, I probably could have utilized it for something.
Its very similar to our polish model "ANDORIA"
isako maruti omni me set kiya jaye to achha mailej dega
Why did u use a hand crank with that thing has a starter on it
Only used the crank in that vid, as it was a second or third start only. Didn't have the starter wired up at that point. Starts easy either hand or starter.
দয়া করে একটু দেখাবেন পানিট্যাঙ্কি কাজ কিভাবে করে
اللهم صلي على حبيب الله محمد ابن عبدالله وعلى جميع الأخيار ومن والاه يالله
?
How's the cooling ?
Its good, after I did some work to it. From the factory, very average, at best.
So a crank start?
Only for this vid. If you watch Changchai 12 HP Chinese Diesel Engine #4 / Generator you'll see it being started with its starter.
mjnh mun co 1 em nhu nay gia bao nhieu
महाराष्ट्र कुठे मिळेल किती पैसा डिझेल इंजिन आहे का
Chanfa
180 engineer load problem
do they make a larger moter like 30 hp?
I think so, but i would think it would shake like a mongrel, this one is bad enough, and its 11 HP.
Sure. Look for ZS1130 changchai .
1595cc, 22kW@ 2200 rpm, 230 kg.
Berapa harganya mas
this one look good, not like the one they sell in indonesia,
It was pretty crappy when I got it. I have done some tidy up on it. Silver paint covered everything.
Build much better in DPRK! Power missile factory no problem!
Is that engine new
It was then, not now. A few hundred hours of use as a standby genny.
Đây là mấy gì vậy ạ của hãng nào vậy
they build train and have to buy engine from the west. also big heavy construction equipments
not only them chinese do so. Look: USA will fly to moon and has to steal all know how, specialists and prototypes from Europe... NOW they are BIG in Space stuff. Once Chinese engines will dominate all.
How reliable are these things?
Some people get a fantastic run from them, others, mehhh. This particular one has been good for the few hundred hours it has done.
8858552581, और बात करें
how much fuel per hour?
At about 2Kw, probably 2.5 - 3lts roughly.
Its THE same engine yanmar , its One Perfect copy this changchai 😂
how much prise
how much is a new one?
few hundred USD.... you can get a simple 200cc predator gasoline engines for about under USD200
Price
What's the price (FOB)? I'm interested.
While this one is in harness as a prime mover on a generator, and not for sale, i believe you can buy them new, in Australia at least, for about AUD $1,100 or so.
+eduard pascal linyi changmei machinerymanufacturing co.,ltd. produce single diesel engine 6-30hp,if you interest it ,can contact me cmjx1@lycmjx.com +8615065920776
eduard pascal :ple sent email to me,i am a salesman of manufactry. email: zhuyongbo1123@163.com
Is it available in India?
I don’t know, the engine is Chinese, and this is Australia. I think India makes some pretty good Lister diesel clones.
@@harrothepilot : ok, thank you.
but dose it roal coal?
Haha, when you load it up enough, it gives a passable impression by spewing volumes of black smoke everywhere.
RockeyDAproductions
The real question is did you make it past grade 3?
RockeyDAproductions put it under a massive load and nail the throttle.
How Mileage in per hour
Depends on load. Around a litre with 2,500W load for an hour.
Vai ei enginer dam koto
দাম
ㅌ
Ka dam kya hai
Made in China changzhou
I wanna buy one. where do I get it
engines r us
Steve do you still have it
What kind of price are you looking to get for it and are you in the states.
@Steve Paige why are you selling it?
I want this, contact me
Beautiful Creature www.wholesale-smallengineparts.com/s195-12hp-water-cooled-4stroke-diesel-engine-p-3069.html
अपना नं दे
Ces moteurs asiatiques sont la copie plus ou moins bonne et juste des anciens moteurs allemands, autrichiens,etc....le plus notable étant le Jenbach.... machine immortelle et sans égale.... Au revoir...
Chinese diesel engine is. A waste of money ,doesn't last long
+Lindy Perona you may tbuy the worse quality ,if you interest it ,can contact me cmjx1@lycmjx.com www:lycmjx.com
+Lindy Perona
There are off-grid people with tens of thousands of hours on these engines. You have to run hopper cooling, though and the cheap gaskets and rubber parts need to be upgraded. The basic engine is rock solid.
+scdevon Very true, its the bolt on stuff that can be suspect, and need to be changed/altered. The engine itself seems pretty tough.
Lindy Perona why, do you have one? (just curious)
Lindy Perona you know what i live in Philippines and i have a 20 year old chinese diesel engine and it runs well and i attach to my old "grandong" truck
and why in english? Will the gringos buy them? Hahaha
Yanmar copycat. I love Japanese engines. China engines are junk. See this video is a new China-made engine but so many unusual cluttering sounds can be heard? The compression is weak.
+Jade Botacks you konw ,you give the lowest price ,but you need the best quality
The engine sounds fine to me but if you want quality buy the real one
Copy&paste
worst performance
better than an Enfield!
Ok. This is a clone of an OLD yanmar. There are/were a million little handle steered tractors and tillers used all over china from the time of the cultural revolution ( 60's) on and they all used a motor like this...so they didn't just start making them yesterday. Do your research. pick the right company, listen to American users about what needs upgrading. If the metallurgy and the tolerences are good, then it has the potention to last a very very long time..with knowledgable owners.
Price
রেডিয়েটরের কাজ কি ভাবে করে জানতে চাই