How to Install AMP Research Power Step on a 2020 Ram 2500
ฝัง
- เผยแพร่เมื่อ 23 ส.ค. 2024
- realtruck.com/...
The Amp Research PowerStep Running Boards is an electronic running board that tucks under the truck when the doors are closed, but once the door opens the running boards will quickly extend out to provide a step. This will save you ground clearance while you're driving but, makes life easier with its automatic motion. Built with Anti-Pinch technology, these running boards are made with safety in mind. If the running board feels any resistance when retracting, they will re-lower so the obstruction can be removed.
Stay Informed and Sign Up:
www.realtruck.c...
Subscribe to our Channel: / realtruck
Free shipping for orders over $100!
I moved the right side step so the end cap (of the rear mounted idler) is at the mounting bracket...so about 3/4 of an each from perfectly centered. After this adjustment I did not have any interference from the pinch weld (it was hanging-up previously at the radius of the pinch weld bend ).
Thanks for the detailed instructional video, the best on TH-cam regarding AMP Research installation. Although mine is the Tundra, I learn a lot from your video.
Great video 👍🏼 installing yourself will save at least a couple hundred bucks. Plus you’ll do it nice and how you want it done ! I hade LINE-X install mine and well long story short I had to re wire everything do to wires were all over my engine bay 🙄😬
هل تعلم اين أجد التروس الدآخليه لمحرك دعسه يوكن دينالي ٢٠١٤
Thanks for the video. Can you please explain why you didn’t install the front spacer ?
Thanks for the video.
It was great help today.
Does 22 2500 ram have factory plugs for these step ?..i see 2 capped plugs
Great video, I'll be ordering those for my 2021 RAM 2500 in the next few months. I like the looks of your 2500, what size tires and brand are you running on that beauty and lift/ level. Thanks for the info, Navy Mark...
Hey Mark! On our Ram 2500, we have the Supreme Suspension 3in leveling kit with 37x11.50 Nitto Trail Grappler M/T tires.
Excellent video
One of my steps won’t go back up. Fuse is good lights work. Any ideas?
Thank you for the video!
Thank you for the video. Unfortunately my amp steps are giving me fitment issues, they keep getting stuck inside the pinch weld.
Sorry to hear that :(
Did you figure out the problem? I am currently having the same issue
Have you tried the bounce technique?
th-cam.com/video/ITbAeixVKdQ/w-d-xo.html since real truck can't read
Will this application work on the 2021 Ram Power Wagon? I have been told that there is something under the body that wont allow the XL to be placed.
air tank/pump, you can relocate it
Can you touch on what you did with the pinch welds I've done a hundred of these dodges and the pinch weld always causes the step to hang up are you grinding the pinch weld also there has got to be a better remedy. I've even started building stoppers so the step don't go all the way up
It hasn't been a dodge for over a decade
@@marchuffman8266 ok. Ram
th-cam.com/video/ITbAeixVKdQ/w-d-xo.html
Ugh I want to put a set of these on my rebel but seems like more time than I would have.
Do it. You can do the install one step at a time as you see fit. That is what I did. One day I did the first step for all 4 corners i.e. installing the bracket inside frame, doing the pop rivet, and nutserts. Took about 20 minutes. Next day I bolted the mounts/motors/steps on. Took about 30 minutes. 3rd day I did the wiring. That took a good 2hrs. I took my time, strategically routed everything under the hood/firewall.
Is there a way to wire it up without using the OBD II?
Hey there! Unfortunately not, but Amp-Research also makes a pass through harness that you can use if you want to also run a tuner/monitor or anything else that requires an open OBD2 port. :)
Did you need to trim the pinch weld
th-cam.com/video/ITbAeixVKdQ/w-d-xo.html
Is there any reason these won't work on a gas 2500?
I installed them on my 2017 Ram 2500 6.4 last february no issues.