I have been a General Contractor pushing 40 years, like every other contractor I would have laughed and said there is just no saving particle board. (If it's wet like a sponge you can't even power dry it with a professional dehumidifier). But! my floor-to-ceiling particle board divider between my custom tile, cabinets, and refrigerator bubbled up and I am not remodeling the kitchen until next year. So seeing your results I thought I have nothing to lose and went for it. Sanded out all bubbles (raised surfaces), scraped/gauged out all crumbly material, sanded to 80 grit, and then skimmed with quality wood putty. Sanded to 120, primed with 999, sanded again, and instead of sticking the decorative vinyl tiles over the damage as my wife planned. She took one look at it and broke out the chalk paint. I was sure the putty would just pull off when sanded flat, but it held, so I know I am going to get more than a year out of it. Kitchen Remodel postponed - Bless you :)
In May I broke my arm. Sadly it resulted in my radial nerve not responding. I ended up losing my job where I was making six figures. So I can no longer type or play piano, I am a musician as well..... But I started watching videos on furniture flipping and it turns out if I wear my brace on my hand I'm able to do a pretty good job at it! I am really excited to start this journey and I've already sold a couple of pieces. It's proof that even when life throws you down you can stand back up and fight.❤
Great Job. This is a common problem with MDF window sills as well. One trick I use is to drill out drill out the swelling and patch it with a filler. I sand the filler when dry, scratch sand the rest, and go through the same procedures you do. This saves a lot of time in sanding, creates less dust, saves money on sand paper, and makes your hands last longer. Again, great job and great advice.
@@amber_Forever16 If it is that bad, throw it away. It will not be worth your time and effort. You can find sold wood furniture at thrift stores, the salvation army, good will, on the side of the road on large trash day, and from friends who are looking to downsize. Run from mdf products. In my case, I have to make repairs from time to time as it is installed in door jams, trims and window sills when I do paint restorations. Best of luck.
Thanks for this video. My wife and I are in the process of remodeling and repairing her late parent's 1990s mobile home. We discovered moisture damage on the kitchen cabinets so seeing you do this gives us hope since we're on a budget.
I repair furniture and I like how you approached the swollen MDF top. I have not used that approach for a repair as most want the top to remain the same, especially if it is a set piece. You have given me some food for thought about future repairs. A couple of suggestions for future flips. When removing the swelling from pieces, you may want to try a sharp chisel. If you lay the back of the chisel flat against the surface, you can shave off the swelling prior to sanding. It wont be perfectly flat, but this will reduce the overall time needed to sand. The other suggestion would be to use heavier clamps when gluing damaged corners. Harbor Freight has some inexpensive F-style clamps that are perfect. Additionally, sandwich the broken corner with a small piece of melamine on the top and bottom. This serves two purposes. First, it gives you a strong surface to clamp against without damaging your workpiece. Second, any glue squeeze out wont stick to the melamine. The heavier clamps will force the damaged corner back together better and may eliminate the need to use filler. Thanks for the video and the ideas for future repairs I may encounter.
This is the third tutorial of yours that I have watched and I am hooked. You are wonderful, telling those of us that are aspiring to find a after retirement job and have no idea how to fix things, but really want to learn. I have been watching Kasha another Reviver, she also explains things well. I just bought a Wardrobe thatI am going to keep that is in need of lots of help, so I can preactive on it. Thank you again for sharing your knowledge,.....I'm sure now that I will get that home business going!!!
Thank you for talking a little more to us today it's nice to see all these beautiful tips on how to fix the damage you did an awesome job you're a great teacher thank you for sharing have a great day God bless you
I have seen furniture like this many times and always passed them up because I thought it was hopeless! Thank you for your very clear video that makes it look so simply I think even I can do it!
Thanks you for your kind words Lisa. I am learning with every piece I finish so do not be discouraged if you get "stuck" on a piece. You CAN do it! Start with a small piece first and gain experience AND watch a bunch of TH-cam videos.
Hi Cheryl. Glad you like it. I like the music too but I had quite a few people actually complain about it so I use different music in my more recent videos.
What a great video. Thank you for helping us. People like me do not know all the ins and outs of flipping furniture and this made it easy. I do it for my home not for resale
Hi Stella. I make my videos for people like you so you can have clear, concise info showing you how to refinish furniture for your personal use (or to flip it). I am glad it was helpful. If you think I need to do something differently, please let me know. I learn a lot reading these comments from my viewers.
I have a night stand with the same damage. I'm so glad I came across your video. Thank you so much for the detailed instructions. I knew I needed to subscribe to your channel. Thanks so much.
Now I will know what to do with any of my partical board furniture if it ever gets damage. I have a project right now that I will try your process on,thank you for the help.
Dang!!! I looked at a dresser next to the dumpster in my neighborhood earlier and it had great working drawers that were perfect inside. Should've grabbed it!!! Won't happen again. Subbed. Thank you!!!
Thank you so much for all the detail that you gave in this video. So many people forget to give all those fin details which are so important. I have subscribed to your channel as you are wonderful
Thank you for taking the time to share your expertise with us!!! Your video mentioned repairing a split drawer, have you filmed a video covering that topic? If so, I would LOVE to watchbit as well!!
In this video I show how the top edge of the dresser had gotten wet so the MDF had become separated into thin layers. I showed how I glued it together, filled it with wood putty and then sanded it. I don't think I showed the "after"photo. But it ended up looking perfect- you cannot tell at all that I repaired it. I recently did a chest of drawers with the same problem on the drawer front. The link to the video showing this is th-cam.com/video/OVHl4lz5n2w/w-d-xo.html Thank you for your kind words!
Oh wow I didn’t realize you could do this! My parents gave me an old pair of nightstands they’ve had forever when they moved house and although I love the shape I hated the water marks on the top. I’ve just put putting placemats on them and I was considering getting rid of them, but this just gave me an amazing idea! Thank you for sharing!
Go for it! I have lots of videos that explain exactly what to do to refinish them. If you have any ? along the way just write them in the comments of any of my videos- I always respond to comments. I am here to help!!!
Perfect video! I have an old octogon end table with a top like that. Bubbles included! I didn't know how to fix it before. Thank you! My biggest problem is deciding what color to paint it!
LOL! Yes, I understand how hard it can be to choose a color. I like to use Behr chalk paint so you can have it tinted to any of the colors on the wall! Toooooo many to choose from!
I am moving into a house soon that we just bought and we considered buying all new furniture until we saw it would be a few thousand dollars. I found your video an it has been very helpful in educating me on how to repurpose our old hand me down furniture.
I would definitely purchase used furniture and refinish it. My videos show you how to paint it or stain it. I suggest taking time to purchase only wood furniture. You can get it frequently for the same price as used mdf furniture. Just take your time and look ALL OVER for used furniture! You will find exactly what you want!
Doing this with the item against a wall gave me so much anxiety. Tutorial is fantastic just move it away from the wall so you don't have to fix the wall too 😉
LOL! I have had so many people comment about the wall. I did not get anything on the wall. I was using that workshop on a temporary basis so I was very very careful not to get anything on the floor or walls. Thanks for watching!
Thanks for your video! I’m working on flipping a side table and it’s made out of particle board/ MDF (don’t really know how to tell difference) and it was some water damage at the bottom and some wood fussy. Everyone one keeps recommending shellac based primer for MDF water damage rather than water based. I already have bulls eyes 123 primer and was hoping to use what I already have. This is the older video I came across that has used water based primer. Does using water based primer leads to swelling in the MDF?
Thank you madam, i like your technique especially the vacuum in the sander exhaust. That was brilliant! I have some tables and now i have a better idea what ill do with them. May the Lord JESUS CHRIST Bless you!
I am Beatrice,,,Dodds wife,,,I’m the one one the furniture repair/ paint sites,,,thanks for the tip,,I thought the table was to be trashed,,,now I’m going to give it a try
Excellent video and instructions! I have an MDF table that I bought second-hand that was left outside at some point. Now, I am feeling more confident about fixing it up & keeping it. Thank you!
Hi LV- Glad it was helpful Could you please give it a thumbs up so youtube will see that it is of value and they will then show it to more people. Many thanks!!!
This video came j6st at the right moment for me! I found 2 bedside tables listed for $3.00 each and 2 more for $4.00 each but they gave me all 4 of them for $10.00! I will finish them this weekend/week and will send you a picture. Thank you for a great tutorial!!
That is awesome! Yes, I want to see the final results. Remember ----- after you sand the bubbles/top flat with 60-80 grit sandpaper you need to go over it again with 220 to close the pores. It makes a BIG difference!!! Do not skip that step.
Thank you for this. I have two night stands which must match your set because they are spot on the same with the same damage to the top. But I’m excited to tackle them now. The 220 grit sanding to seal the pressed wood was my missing link. Thank you
Good video! U need some tighter clamps lol 3 on that corner get it clamped kinda funny I have one like that as well but purchased some moy long ago that are much stronger
Thank you for doing this video, and posting it! The door of our entryway closet is MDF. It got wet at the bottom edge, and is buckled out. I did not want to have to replace it. I wondered if there was a way to repair it. So, thank you very much!
Oh another thought- if you are going to fix a cabinet in an area that is prone to water I would use the best possible primer and that would be a shellack based primer- it will say on the label if it is shellack or oil or water.
I'm not into furniture flipping, but this is a BIG help! My bedroom furniture got damaged while moving. It's made of this stuff and it was NoT a cheap set. I cringe at the thought of replacing it but now I have options 🙃 Tyfs!
Hi Niccole. Thanks for watching. If you watch some of my videos you will see that it is really quite easy. I roll or brush the paint and finish on so it is something you CAN do inside with a drop cloth under the furniture.
I have a particle board nightstand and the top layer is almost gone. I can see the particle board more than the "wood" layer. Can I sand, primer, sand and paint? Thanks!
You know, on those tops, you could use a router to reshape the edge pretty easy too. Just find a router bit that is close to original shape and zip around edge. Great work and is nice to see something avoid going to landfill. Someone will get a lot of use out of that and you can make a few bucks for tour time. Thanks for video!
Thanks Indiana- I have a router but have yet to learn how to use it. Thankfully, I did not damage the edges so I did not have to dig out the router manual and learn how to fix the edges.
@@FurnitureFlippingForProfit Routers are easy to use. The only problem I had at the beginning was setting up the depths but once I had that down it was easy
I just started a table today. The corner is swollen above and on the bottom of the trim piece. It has laminate on the top. So if I understand you. I should remove trim and sand the table till flush with the res tof top and bottom. I can round edge.
In this video you recommend water-based primer under the chalk paint. However, I noticed in your chalk paint comparison video, you recommended oil-based primer to prevent bleeding. So, if you did the project again, would you use water or oil based primer? Thank you!
Oh WOW! Thank you So much for this video 👍now I can keep the old Dresser in the Shed and work on that 😜 It Has Some Really Bad bubblling going on 😩 Just ❤️ the Way the top turned out 👍Can’t Wait to See you paint the test of it
Hi Ondina- Glad you liked the video. Let me know how the dresser turns out, I am starting to work on the dresser in the video now. The carved doors are the worst part! I just filled them in today so I am hoping it goes well.
Thank you soo much. I am trying to redo my kitchen cabinets in my mobile home, which are also damaged particle board. You helped me soo much. Thank you ❤️🎨🖌🎨❤️
Hey,I just come across this video and this is very informative. I'm new to repairing stuff like this so I just wanna ask if I can use wood filler as a seal the particle board?
This video is very helpful. I have a question. What would you do if you want to stain it close to the original color verses painting it? I damaged my night stand by not using a coaster and I’m trying to repair it. Thanks
Hi TL. You cannot stain particle board. What you see as "stained wood" is a laminate top with a photograph of wood. I just put out a video about "Liquid Wood" You could actually paint Liquid Wood on the top of a particle board dresser and then stain it. It looks like real wood! Here is the link th-cam.com/video/VW7rORdQSxw/w-d-xo.html
Hi Melissa- Just to clarify- you spray a clear coat on and then paint over it? or you just put a clear coat on after your paint with chalk paint? Glad you found the video helpful.
@@FurnitureFlippingForProfit hi! Yes. I sand everything smooth, till all the bumps are gone. Grab a $5 can of gloss clear coat, spray once, lightly sand, then do another coat. Works GREAT! (I hate priming lol)
I have been a General Contractor pushing 40 years, like every other contractor I would have laughed and said there is just no saving particle board. (If it's wet like a sponge you can't even power dry it with a professional dehumidifier).
But! my floor-to-ceiling particle board divider between my custom tile, cabinets, and refrigerator bubbled up and I am not remodeling the kitchen until next year. So seeing your results I thought I have nothing to lose and went for it.
Sanded out all bubbles (raised surfaces), scraped/gauged out all crumbly material, sanded to 80 grit, and then skimmed with quality wood putty. Sanded to 120, primed with 999, sanded again, and instead of sticking the decorative vinyl tiles over the damage as my wife planned. She took one look at it and broke out the chalk paint.
I was sure the putty would just pull off when sanded flat, but it held, so I know I am going to get more than a year out of it.
Kitchen Remodel postponed - Bless you :)
In May I broke my arm. Sadly it resulted in my radial nerve not responding. I ended up losing my job where I was making six figures. So I can no longer type or play piano, I am a musician as well..... But I started watching videos on furniture flipping and it turns out if I wear my brace on my hand I'm able to do a pretty good job at it! I am really excited to start this journey and I've already sold a couple of pieces. It's proof that even when life throws you down you can stand back up and fight.❤
Repairing is always better than buying new!! You’re a good force in the world
I agree! That is why I started this channel- to teach people how easy it is to buy and refinish old furniture! Thank you.
came for the information, stayed for the smooth jazz
I am so glad someone other than me likes it!!! I have had a lot of people complain about it but I like it. LOL!
Would like to know who the music is by 😊❤
💯
Same! This video is informative AND relaxing. I immediately subscribed for more!!
Great Job. This is a common problem with MDF window sills as well. One trick I use is to drill out drill out the swelling and patch it with a filler. I sand the filler when dry, scratch sand the rest, and go through the same procedures you do. This saves a lot of time in sanding, creates less dust, saves money on sand paper, and makes your hands last longer. Again, great job and great advice.
How do you "drill out the swelling"?
In my head I'm seeing you drill a billion holes into it😂
@@amber_Forever16 If it is that bad, throw it away. It will not be worth your time and effort. You can find sold wood furniture at thrift stores, the salvation army, good will, on the side of the road on large trash day, and from friends who are looking to downsize. Run from mdf products. In my case, I have to make repairs from time to time as it is installed in door jams, trims and window sills when I do paint restorations. Best of luck.
Thanks for this video. My wife and I are in the process of remodeling and repairing her late parent's 1990s mobile home. We discovered moisture damage on the kitchen cabinets so seeing you do this gives us hope since we're on a budget.
I hope the restoration is going well
I repair furniture and I like how you approached the swollen MDF top. I have not used that approach for a repair as most want the top to remain the same, especially if it is a set piece. You have given me some food for thought about future repairs.
A couple of suggestions for future flips.
When removing the swelling from pieces, you may want to try a sharp chisel. If you lay the back of the chisel flat against the surface, you can shave off the swelling prior to sanding. It wont be perfectly flat, but this will reduce the overall time needed to sand.
The other suggestion would be to use heavier clamps when gluing damaged corners. Harbor Freight has some inexpensive F-style clamps that are perfect. Additionally, sandwich the broken corner with a small piece of melamine on the top and bottom. This serves two purposes. First, it gives you a strong surface to clamp against without damaging your workpiece. Second, any glue squeeze out wont stick to the melamine. The heavier clamps will force the damaged corner back together better and may eliminate the need to use filler.
Thanks for the video and the ideas for future repairs I may encounter.
Love your idea😉
I agree that's what I do! I shave a good amount off before adding filler etc
This is the third tutorial of yours that I have watched and I am hooked. You are wonderful, telling those of us that are aspiring to find a after retirement job and have no idea how to fix things, but really want to learn. I have been watching Kasha another Reviver, she also explains things well. I just bought a Wardrobe thatI am going to keep that is in need of lots of help, so I can preactive on it. Thank you again for sharing your knowledge,.....I'm sure now that I will get that home business going!!!
Ohhh geee thanks Marica! You inspire me to keep going!!!
Thank you for talking a little more to us today it's nice to see all these beautiful tips on how to fix the damage you did an awesome job you're a great teacher thank you for sharing have a great day God bless you
Thank you Cathy. That is so kind of you to say. I hope it helps you to save a piece from the landfill.
Excellent teaching. Thank you for being so thorough. I will certainly save it for additional watching!
Thanks N. Glad it was helpful!
Smooth jazz is so soothing. Excellent technique. I use the same. I subscribed.
Yeah! someone else like my smooth jazz!!! Unfortunately we seem to be in the minority! Thank you for subscribing!!!
I have seen furniture like this many times and always passed them up because I thought it was hopeless! Thank you for your very clear video that makes it look so simply I think even I can do it!
You are so welcome!
Great tutorial! Thanks for helping all of us who are new to furniture flipping. Now I won't be so intimidated by the pieces in such bad shape.
Thanks you for your kind words Lisa. I am learning with every piece I finish so do not be discouraged if you get "stuck" on a piece. You CAN do it! Start with a small piece first and gain experience AND watch a bunch of TH-cam videos.
Just the video I was looking for.
Straight to the point and I love the music and you did not drag on to explain how to fix.
Great job!! 👍
Thank you! I bought a particle board dresser and night stand for $40, very damaged. Your tutorial and chalk paint to the rescue!
Glad I could help!
In addition to excellent instruction, the music is fabulous!
Thank you for all of it!
Hi Cheryl. Glad you like it. I like the music too but I had quite a few people actually complain about it so I use different music in my more recent videos.
What a great video. Thank you for helping us. People like me do not know all the ins and outs of flipping furniture and this made it easy. I do it for my home not for resale
Hi Stella. I make my videos for people like you so you can have clear, concise info showing you how to refinish furniture for your personal use (or to flip it). I am glad it was helpful. If you think I need to do something differently, please let me know. I learn a lot reading these comments from my viewers.
THANK-YOU so much for creating this video !! - I was about to experiment on a couple of projects with this issue.... you saved me a lot of time !! 💖
Who does your music? I like the soft jazz.
OMG Don you and I are the only ones I think! I had so many people complain about it that I have not used it since.
You have so much passion in what you do and that is very pleasing to watch. Great video and simple steps to follow.
Thank you very much! I love refinishing furniture and am glad to have my TH-cam channel to share my experiences with the viewers.
Thanks! Gonna do my cabinets!
Very helpful. I have a desk that has a lot of bubbles. I will be doing this. Thanks
I have a night stand with the same damage. I'm so glad I came across your video. Thank you so much for the detailed instructions. I knew I needed to subscribe to your channel. Thanks so much.
YEAH!!! a new subscriber!!!
Thank you for the tutorial, very good and love the music you added!
Now I will know what to do with any of my partical board furniture if it ever gets damage. I have a project right now that I will try your process on,thank you for the help.
You CAN do it Rosemary! Let me know how it works out.
Very helpful, I’m going to be able to do this to my desk that I was thinking of replacing. You’ve earned a subscriber, thank you.
Thanks for the sub! Best of luck- I know you can do it!
Dang!!!
I looked at a dresser next to the dumpster in my neighborhood earlier and it had great working drawers that were perfect inside. Should've grabbed it!!!
Won't happen again.
Subbed. Thank you!!!
Thank you so much for all the detail that you gave in this video. So many people forget to give all those fin details which are so important. I have subscribed to your channel as you are wonderful
Glad it was helpful! YEAH!!! A new subscriber!
Gorgeous!! Love the tutorial
Thanks Jackie. Glad it was helpful
Very helpful! I like the way you posted in writing for those of us that like to take notes & the fact that you then explained & I love the music🥰
I got a TV stand off the curbside and can't wait to work on it. Thanks for your user friendly video 😊
Thank you very much! I need to refinish a used roll top desk, that has particle board which has swollen areas on its surface..
Go for it Sherrye!
Never would have considered refinishing a piece made out of MDF. But after watching this video, I gotta try this. Good video. 👍😎
Go for it! Thanks for watching!
Thank you for taking the time to share your expertise with us!!! Your video mentioned repairing a split drawer, have you filmed a video covering that topic? If so, I would LOVE to watchbit as well!!
In this video I show how the top edge of the dresser had gotten wet so the MDF had become separated into thin layers. I showed how I glued it together, filled it with wood putty and then sanded it. I don't think I showed the "after"photo. But it ended up looking perfect- you cannot tell at all that I repaired it.
I recently did a chest of drawers with the same problem on the drawer front. The link to the video showing this is th-cam.com/video/OVHl4lz5n2w/w-d-xo.html Thank you for your kind words!
T
P
Oh wow I didn’t realize you could do this! My parents gave me an old pair of nightstands they’ve had forever when they moved house and although I love the shape I hated the water marks on the top. I’ve just put putting placemats on them and I was considering getting rid of them, but this just gave me an amazing idea! Thank you for sharing!
Go for it! I have lots of videos that explain exactly what to do to refinish them. If you have any ? along the way just write them in the comments of any of my videos- I always respond to comments. I am here to help!!!
@@FurnitureFlippingForProfit thank you so much! I definitely will ☺️
I thank you so much I was having the same problem and you help me.
Awesome Video!
I never Realized Particleboard Furniture could be Repaired, we've always just gotten rid of damaged Particleboard Furniture.
Thanks Anthony. I am glad it was helpful!
Perfect video! I have an old octogon end table with a top like that. Bubbles included! I didn't know how to fix it before. Thank you! My biggest problem is deciding what color to paint it!
LOL! Yes, I understand how hard it can be to choose a color. I like to use Behr chalk paint so you can have it tinted to any of the colors on the wall! Toooooo many to choose from!
@@FurnitureFlippingForProfit oh, that's something to look into! When I decide on a color that is.
I am moving into a house soon that we just bought and we considered buying all new furniture until we saw it would be a few thousand dollars. I found your video an it has been very helpful in educating me on how to repurpose our old hand me down furniture.
I would definitely purchase used furniture and refinish it. My videos show you how to paint it or stain it. I suggest taking time to purchase only wood furniture. You can get it frequently for the same price as used mdf furniture. Just take your time and look ALL OVER for used furniture! You will find exactly what you want!
Thank you for this video. My sister gave me a cute side table with water damaged top. Now I know just what do do
Glad I could help!
An unbelievable amount of valuable content!!! The video quality and editing of video is amazing! Great job. THANK YOU
Thanks Kimberly. I am glad you found it helpful.
Thanks for sharing!
You bet!
Doing this with the item against a wall gave me so much anxiety. Tutorial is fantastic just move it away from the wall so you don't have to fix the wall too 😉
I felt what's you said😊
LOL! I have had so many people comment about the wall. I did not get anything on the wall. I was using that workshop on a temporary basis so I was very very careful not to get anything on the floor or walls. Thanks for watching!
Same
Huh 🤔
q
Thanks for your video! I’m working on flipping a side table and it’s made out of particle board/ MDF (don’t really know how to tell difference) and it was some water damage at the bottom and some wood fussy. Everyone one keeps recommending shellac based primer for MDF water damage rather than water based. I already have bulls eyes 123 primer and was hoping to use what I already have. This is the older video I came across that has used water based primer. Does using water based primer leads to swelling in the MDF?
great video. lots of info
So glad you found it helpful. Please give the video a thumbs up! Thanks!
Thank you so much! I’ve got some work to do. Also, I loved your music ❤️!
So glad!
Thank you so much for this tutorial you are amazing 🙌🙌🙌
thank you for this video.
My pleasure!
Wow, excellent job!
ty for helping me i have bumps in my desk so i went to youtube thx! im going to like the video!
Thank you madam, i like your technique especially the vacuum in the sander exhaust. That was brilliant! I have some tables and now i have a better idea what ill do with them. May the Lord JESUS CHRIST Bless you!
THank you!
I am Beatrice,,,Dodds wife,,,I’m the one one the furniture repair/ paint sites,,,thanks for the tip,,I thought the table was to be trashed,,,now I’m going to give it a try
Hi Beatrice- glad I could be of some help. Let me know how it turns out!
Excellent video and instructions! I have an MDF table that I bought second-hand that was left outside at some point. Now, I am feeling more confident about fixing it up & keeping it. Thank you!
Hi LV- Glad it was helpful Could you please give it a thumbs up so youtube will see that it is of value and they will then show it to more people. Many thanks!!!
👍🏻 Now I’ll go look for the dresser redo.
Great tutorial! I always used a good sealer on the bubbled areas. Sometimes a waterbase primer would bubble again.Any shellac based sealer will do.😊
VERY INTERESTING, I LEARNED A LOT, THANK YOU
Glad to hear it!
Great job!
Thank you for the helpful tips
You are most welcome Carol!
This video came j6st at the right moment for me! I found 2 bedside tables listed for $3.00 each and 2 more for $4.00 each but they gave me all 4 of them for $10.00! I will finish them this weekend/week and will send you a picture. Thank you for a great tutorial!!
That is awesome! Yes, I want to see the final results. Remember ----- after you sand the bubbles/top flat with 60-80 grit sandpaper you need to go over it again with 220 to close the pores. It makes a BIG difference!!! Do not skip that step.
You are one determined woman to take on this dresser! It is amazing what you did to turn it around! Good job!
Thank you so much!
Thank you for this. I have two night stands which must match your set because they are spot on the same with the same damage to the top. But I’m excited to tackle them now. The 220 grit sanding to seal the pressed wood was my missing link. Thank you
Thank you- glad you liked it!
Excellent tutorial! Just happened upon your video and I really enjoyed it. Ty for sharing
Thanks Jackie! I am glad you enjoyed it! Did you subscribe so you can be notified of future videos?
What a great video!! Thank you for teaching us how to fix something so common. ❤️
You are so welcome! Thank you for your support!
Soooo informative!!! Very great video. Thank you for spreading your knowledge!
Glad it was helpful!
Thank you so much for this video , I really appreciate how you explained every bit , you earned a new subscriber today .
Yeah!
Wow! You are awesome! Thank you so much for sharing your secrets with us
Thank you Mariana. You are so kind!
Thank you
Thank you for sharing , i really appreciate it helpful tips.
You are so welcome!
Wow! That looks awesome!
Thank you!
Amazing thank you so much!
Good video! U need some tighter clamps lol 3 on that corner get it clamped kinda funny I have one like that as well but purchased some moy long ago that are much stronger
Thank you for doing this video, and posting it!
The door of our entryway closet is MDF. It got wet at the bottom edge, and is buckled out. I did not want to have to replace it. I wondered if there was a way to repair it. So, thank you very much!
Glad it was helpful!
Thanks so much. I'm going to try this on swollen/bubbled cabinet door under sink. I'll let you know how I do.
You are welcome mommieDDD. Keep in touch
Oh another thought- if you are going to fix a cabinet in an area that is prone to water I would use the best possible primer and that would be a shellack based primer- it will say on the label if it is shellack or oil or water.
@@FurnitureFlippingForProfit Thanks!!
Great video. Great music.
Many thanks!
Totally loved this video! Learned so much!!!!
Glad it was helpful!
A great tutorial! I have a desk that is pretty now I can make it even more so.
Thank you so much!
You are so welcome!
Thank you! I have a sander, but it's not orbital. What one do you have? What is the hose with it?
It is a ryobi battery operated sander. It is connected to a small inexpensive shop vac.
Thanks for the tips and inspiration. Lovely result, it was so worth your effort. 😊
Thanks so much! 😊
You are really good at this ands great Teacher
Thank you Elizabeth! Who is that adorable baby? You grandson or child? CUTIE PIE!!!
I'm not into furniture flipping, but this is a BIG help! My bedroom furniture got damaged while moving. It's made of this stuff and it was NoT a cheap set. I cringe at the thought of replacing it but now I have options 🙃
Tyfs!
Hi Niccole. Thanks for watching. If you watch some of my videos you will see that it is really quite easy. I roll or brush the paint and finish on so it is something you CAN do inside with a drop cloth under the furniture.
I have a particle board nightstand and the top layer is almost gone. I can see the particle board more than the "wood" layer. Can I sand, primer, sand and paint? Thanks!
Would a water based primer also make the mdf bubble?
No - there is not enough water in it to cause a problem. It also dries quickly
Awesome job loks Great
Thanks Brenda!
You know, on those tops, you could use a router to reshape the edge pretty easy too. Just find a router bit that is close to original shape and zip around edge. Great work and is nice to see something avoid going to landfill. Someone will get a lot of use out of that and you can make a few bucks for tour time. Thanks for video!
Thanks Indiana- I have a router but have yet to learn how to use it. Thankfully, I did not damage the edges so I did not have to dig out the router manual and learn how to fix the edges.
Good tip👍
@@FurnitureFlippingForProfit Routers are easy to use. The only problem I had at the beginning was setting up the depths but once I had that down it was easy
I’ve also used bondo to reshape (mold) broken off edges🤓
I just started a table today. The corner is swollen above and on the bottom of the trim piece. It has laminate on the top. So if I understand you. I should remove trim and sand the table till flush with the res tof top and bottom. I can round edge.
This a great for sure...except I don't have one of those electric sanders, so I don't think I can do it : (...but this will help lots of people
In this video you recommend water-based primer under the chalk paint. However, I noticed in your chalk paint comparison video, you recommended oil-based primer to prevent bleeding. So, if you did the project again, would you use water or oil based primer? Thank you!
Thank you so much 💓 💗 💛
Looks great. Thanks for information.
Thanks you for your kind words. Keep watching!
Oh WOW! Thank you So much for this video 👍now I can keep the old Dresser in the Shed and work on that 😜 It Has Some Really Bad bubblling going on 😩
Just ❤️ the Way the top turned out 👍Can’t Wait to See you paint the test of it
Hi Ondina- Glad you liked the video. Let me know how the dresser turns out, I am starting to work on the dresser in the video now. The carved doors are the worst part! I just filled them in today so I am hoping it goes well.
Thank you soo much. I am trying to redo my kitchen cabinets in my mobile home, which are also damaged particle board. You helped me soo much. Thank you ❤️🎨🖌🎨❤️
Hi Sara.Wow! I am so glad you can use this info!!
Repairing my mobile home cabinets was daunting. I’d been looking and looking how to do them … now I do!!
Thank You 😊
Hey,I just come across this video and this is very informative. I'm new to repairing stuff like this so I just wanna ask if I can use wood filler as a seal the particle board?
sanding sealer works best. I found that out after I did this video.
You are so talented! Thanks for a great video.
Thank you! Cheers!
This video is very helpful. I have a question. What would you do if you want to stain it close to the original color verses painting it? I damaged my night stand by not using a coaster and I’m trying to repair it. Thanks
Hi TL. You cannot stain particle board. What you see as "stained wood" is a laminate top with a photograph of wood. I just put out a video about "Liquid Wood" You could actually paint Liquid Wood on the top of a particle board dresser and then stain it. It looks like real wood! Here is the link th-cam.com/video/VW7rORdQSxw/w-d-xo.html
You did a good job. I don't know why they don't use MR MDF instead of just MDF. I personally don't like MDF or Particle Board.
Thanks for watching. Can you purchase MR MDF ?
Beautiful ♥️👍
Thank you! Cheers!
Great idea!
Glad you think so!
Just gotta say, I don't use primer anymore, i spray clear coat and works like a charm in half the time! Great job!
Hi Melissa- Just to clarify- you spray a clear coat on and then paint over it? or you just put a clear coat on after your paint with chalk paint? Glad you found the video helpful.
@@FurnitureFlippingForProfit hi! Yes. I sand everything smooth, till all the bumps are gone. Grab a $5 can of gloss clear coat, spray once, lightly sand, then do another coat. Works GREAT! (I hate priming lol)
Great video!
Thank you TJ!
Minus the music nice video😊
LOL! You are not alone in your opinion about my music choice. More recent videos reflect a different style of music.. Thanks for your comments.