Blender 2.8 Dynamic Conveyor Belt 10 Min Tutorial EASY
ฝัง
- เผยแพร่เมื่อ 18 ก.ย. 2024
- In this exciting Blender 2.8 Tutorial I demonstrate a powerful technique you can use to easily make a dynamic Conveyor Belt which is able to affect Rigid Body Objects. I also show how to do a simple cloth simulation that adds to the conveyor belt.
Subscribe for more Blender Tutorials and VFX!
![เขามัทรี - เอ็กซ์ ศุภกฤต - จอนนี่มิวสิค [ Official MV ]](http://i.ytimg.com/vi/AS9ufKuQIVs/mqdefault.jpg)
You dont understand how much i love you for this. i have searched the entire internet for this effect and nothing worked until your tutorial. thank you so so much!
I loved this tutorial. I have wasted a lot of time watching useless videos trying to learn how to do this. "NOW THANKS" TO YOU I FEEL LIKE A GOD. I don't know how to add texture or use most of Blender's tools But I did this and I might apply for that job. THANKS a Million.
This is great, no BS, straight to the point, thank you for that, really helpful
Wow, I was stuck way too long on one tiny little section of this and finally figured out what I missed. Per your tutorial which you said....make sure to check the Deforming box in Physics! That little piece I missed got me stuck for way too long! Thanks for this great tutorial...it still works in Blender 4.1
Great tutorial.. So glad you showed how to make rigid body simulations work with that deforming checkbox^^
This works great! I had to repeat it from the beginning a few times because I think I was missing important steps, but it works now ... perfectly! (I did have to leave both the conveyor and the cube as convex/hull so the cube didn't bounce all around and fly off into the air, but it still works like a charm. Thank you so much for your tutorial. I'd love see you do more tutorials in blender. It looks like you really know what you're doing...
Great tutorial, it is just what I needed. Subscribed.
Amazing, man. Thanks for doing this
every time I make any change, the rigid body stop working and the objects fall down through the belt.
Make sure to apply the array modifier! I had the exact same problem because I have missed that step in the tutorial
Amazing. Thank you for the tutorial!
Funny how your creating an army of applicants that could be or not be applying at Pixar! lmao
Thanks for this, man. Excellent tutorial
Thanks for the tutorial
Very helpful one😍
I get a strange problem. The physics of the box reacts to the "invicible" belt that moves away in the x direction and not the one on the curve ?
So basicly the box either goes along the x-axis forever or it drops down... Mayby i am just tired and missed someting..
I found it. On the belt rigid body settings i had to change from deform to final. Now its working it seems. Deform with "deforming" ticked did not work. Mayby a bug ?
Anyway great tutorial !
@@minaexperiment it isn't working even after I changed it to final :(
@@qarwill Sorry i dont know what it can be. Have not used blender for 6 months.
Really great tutorial thanks!
Hey, i have an issue. i followed all of the instructions. but weirdly the box is keep going on through the X axis after passing the conveyor edge instead of droping to the ground. can anyone help me?
I had the same issue even with changed from passive to active.
same
same
Awesome stuff thanks this with particles will do
if you are stuck in the box not dropping. Just apply all transformation then undo the transformation. Hope it helps
Sometimes my objects keep sliding into the unknown, like the conveyor belt is endless and invisible. If I change some random settings it sometimes works again and the objects fall down at the end. Any idea why?
Does the same for me, sometimes saving the file and closing blender does the trick, sometimes it doesn't. :(
@@MichaelNatale1267 You both have to create it *carefully* again from the beginning. I did some tests now and it seems that the problem has something to do with a not aboslutely clean creation. All that you describe happened to me too. But in the end it works now correctly. Tested with Blender 3.1, 3.2, 2.8 (linux).
@@Trabucco0 Hello, I've seen this comment from you a lot of times now but no matter how many times and how perfect I create a conveyer belt the rigid bodies simulation is inconsistent and fails all the time. I've also found that more people have been experiencing a lot of issues concerning rigid bodies on conveyer belts, especially in newer versions of Blender. Could you maybe create a small tutorial? Or write down how you do it? As I'm unable to get a consistent, good result.
@@nickykolk You should ask @MajesticSkies if he is willing to upload another vid about this topic. I am just a learner like you too. Sorry.
The boundary box for your collision is not taking the curve modifier into account.
The reason for this is that the key frame animation takes priority over the simulation. Try ending the animation when your object reaches the end of the conveyor belt.
hahahah pixar comment killed me.
Thank you man!
Hy everybody! 6:26 - What key combination did you use?Thanks for the reply
thank uuu so muchh❤
Thank you for a great job. However, for me it does not work properly. The item on the belt moves only on the X axis on the original, not-curved array and not accroding to shape of curve. I can see that very clearly once going to edit mode, than the belt is straight and this is how it interactcs as an rigid body. Do you have any ideas how to fix it? any answer will be highly appreciated !
And yes, I have checked "deforming" at belt rigid body menu...
@T LMGBK Thx
Hi, have you found a way how to fix it?
@@ailisnelis2383 no
Thanks so much for the tutorial. Any chance you'd know how to export this sort of animation into Unity?
Bake the simulation to keyframes and import it as animation
@@mallikapatra5033 How to do it? I tried to bake my animation and import it into unreal engine, but it didn't work. ( Please help
@@aufchk bake the simulation to keyframes. It will add keyframes for every rotation and movement.
The cube just disappears or blasts off. The only way to fix it is to close the project and reopen it, and hope the cube is "placed right".
Is there some kind of secret built-in CACHE hidden somewhere? A few people here have similar problems like this one.
You have to create it *carefully* again from the beginning. I did some tests now and it seems that the problem has something to do with a not aboslutely clean creation. All that you describe happened to me too. But in the end it works now correctly. Tested with Blender 3.1, 3.2, 2.8 (linux).
I have followed every step, but my cube continues to follow the x-axis without falling off the belt, I have tampered with the collisions course on both objects making them either final, deform, or base and no sign of success. Does anyone know why? Ive seen the comment below and the same answers are not fixing my issue.
You have to create it *carefully* again from the beginning. I did some tests now and it seems that the problem has something to do with a not aboslutely clean creation. All that you describe happened to me too. But in the end it works now correctly. Tested with Blender 3.1, 3.2, 2.8 (linux).
Thank you!!!
5:18 How the heck am I supposed to open up that mini tab? Please say what hotkeys you press when you press them. I am hecka confused rn.
Great tuto! simple and super clear!!
Question thou:
How to spanw objects? like if I want to build a factory? and how to make em disappear at the endo of the line?
thanks for all
how do i fix the cube not faling from the Conveyor Belt it jus keeps going forward and flying :(
Doing this in 3.0 and the simulation keeps breaking.
After I do some change in totally different parts of the UI the belt stops working, and just becomes a simple moving plane... and nothing I do can rectify it.
You have to create it *carefully* again from the beginning. I did some tests now and it seems that the problem has something to do with a not aboslutely clean creation. All that you describe happened to me too. But in the end it works now correctly. Tested with Blender 3.1, 3.2, 2.8 (linux).
it works, but blender will randomly crash whenever i hit play.
Under linux it works flawlessly. Tested in 2.8, 3.1 and 3.2.
The cube just falls right through the conveyor and I followed every step
Check if you applied the array instead of keeping the modifier. It worked for me that way.
@@marcosamaral9658 I have the same problem, applied array but the cube falls through the top surface and hits the bottom surface for some reason
Ok now conveyor moves alog with X axis, i don't know why. Any tips?
same to me
i did it correctly 1 time
then i deleted the object and retried and nothing work anymore
all the conveyor moves on the right
@@Machine1104 somehow i repaired it but i dont remember how because i had to stop my project for a while, but i also had another problem later - box isnt just moving with conveyor but its getting super fast and its thrown away and idk why
@@PaulPictures yes i had the problem too before deleting
In my case the problem appeared only if i duplicate the conveyor
@@Machine1104 oh i did the same, i created long one with duplicated from base model... But it should work normally anyway i think
@@PaulPictures yes, should....
HELLO BROTHER HOW SHOULD I EXPORT IT WITH ANIMATION PLEASE HELP
I’ve followed this tutorial now at least five times and I cannot get my cube to fall off the belt. It just keeps going and following the origin point of the belt off into the distance. It’s infuriating.
seems like my cube can't interact with the collider belt whenever this one has a keyframe and just goes through it, does anyone know why? (yes i applied the array modifier)
I have the same problems too. I don't think Blender is developed enough to handle it. I spent hours of tweaking to get it to actually get it to work.
It is easier and a LOT QUICKER to just keyframe an object to make it look like the conveyor belt is pulling the objects along, especially if you are pressed for time.
God forbid if you have to add a conveyor belt to an existing project that has a different settings.
@@rhomis like I managed to make it work in the end but it was just so random. Sometimes it would work then it wouldn't and i'd have to change parameters or reload the scene for it work again .-.
In 2.93 version the cube did not fall from the conveyor belt but continued to float after it came out of the belt. But the cube fell only if I uncheck the Animation option of the belt after the exit of the Cube. Request your suggestion.
I have same problem, 2.93
When I changed the shape of the active object (cube) as 'Box' and the source of passive Belt Object as 'Base' it worked. In case of changing any parameters the active object continue to float in 2.93.
@@MrJana596 Yes I found that if I did something like remove the curve modifier and re-add it, then suddenly things started to work properly. It's some weird bug
@@bradleyberthold4606 Did you ever try lifting rigid body objects on a belt conveyer vertically. I am still trying.
@@MrJana596 no, I didn't try that yet. However, I believe it would work if you used separate objects for each conveyor chunk and set up their timelines to move equally
Anime available in Blender 2.80rc1 version.
but it is not possible in the Blender 3.50 version.
Thanks for the tutorial!!, How do you get multiple objects to appear onto the conveyor belt?
How to animate kicks and throws
My object floating on object, not cling. How to fix this ?
On the cube settings, below the rigid body settings, under “Sensitivity” change the margin to a lower number. That fixed it for me
I'd recommend saving a copy of your file before applying the array modifier
Hey, I have strange problem around 5:00 because i can't set a key frame (location can not be animated error) and also i dont have modifiers button around graph editor. Can you help me?
I have increase the number of frames from 250 to 350 and the box just moved and stopped at 250 while the belt still moving. Any help please?
Easy fix! Go into the scenes tab on the right hand side of your blender window, next go into the rigid body world settings and change the cache end frame to whatever you'd like. 350 in this case :)
Good video
BTW I am only saying this because he told me to.
Im having an issue with the Bezier curve. I got the conveyor to work and wrap around it. But, I added dividers that keep materials on the conveyor. Around the curves the dividers are being stretched.. Any help or info on that?
I may not be right, but I did not put any loopcuts on my first cube which make up the conveyor belt. Before I had this streching around the corner too. So I did my array, applied it and without loopcuts it is fine.
Obviously I am using the newest blender as I just started but how do I get the arrows on the Bezier Curve? I notice if I rotate my curve different it changes the bezier curve and nearly inverts the conveyor section.
Have you been able to make the conveyor? I'm having problems with the colision with the conveyor belt. If you don't would you mind sharing the proyect with me?
@@txaus627 i gave up on the project because it was for work and i quit that job :)
@@teamunicorn9389 It's okay man, than¡ks anyway
I'm not found F-Curve panel in Graph Editor.I was press (N)key but not show F-Curve panel that it's was (show cursor panel).So Please Help me sir.
select the x axis on the left side and then press n u will see modifier
I FOLLOW ALL THE STEPS BUT MY Box do not follow the belt, what is wrong?
thnx
This is very inconsistent, sometimes it works, sometimes don't even though it has the same exact setting. The main problem is the object didnt fall but move along the x axis
I don't know why but my cube is falling through conveyor on the other side
Does anyone know why when I am in the step of creating the first animation it moves along the x axis and does not rotate on itself
You likely created the shape of the curve in the wrong direction. (try "extruding" it in the other direction) Im not sure if its a glitch but I believe I had the same problem when I was first sorting out how to do this. You also need to make sure "deforming" is checked under one of the modifiers
Dont remove the curve modifier
my cube is going towards negative z?
any solution
I figured it out, its just falling due to gravity :p, will change the belt orientation.
thanks a bunch
My cube is running the wrong way any ideas by any chance?
You need to extrude the curve the same direction I did at 1:30 otherwise it will move rigid bodies in the wrong direction. You can also try rotating the entire curve 180 degrees in edit mode of you dont want to start from scratch. I had this exact same issue when experimenting with making this effect work. Blenders curves can be quite finnicky unfortunately.
1:36 can somone explain
i did exactly the same f** **** the hole steps and at 6:01 didn't work the collsion didn't f***** work
Can someone give me some help? I follow every step but the cube keeps falling straight through the conveyor belt... I love the tutorial, but I am so confused and desperate now T_T
Same
make sure to slow down the conveyer enough
mademechuckle :D lol :D you can create pixar output in blender :D install renderman :D
Thank you! I used this tutorial in my video here th-cam.com/video/OaoAL8Id--M/w-d-xo.html and referenced it in the credits
cube literally goes in the opposite direction of the belt
Thanks for watching! The reason for this is you created the curve in the wrong direction (clockwise instead of counterclockwise) I'm sure there's another way to fix it but the easiest method I found is to simply delete the curve and remake it in the other direction (only 4 vertices realistically)
@@majestic-skies i think there is a switch direction option while editing the curve
But too fast
😂😂😂😂😂😂😂
Can someone help me? When I put a cube on the conveyor belt, the cube flies way up.
Same here
My cube doesn’t fall down, it stays moving on x forever. Help please 🙏🏻
@Y’all have Mento Ewness still not working dude. Any another solution ?