Sound Deadening Install On Ford Ranger Raptor
ฝัง
- เผยแพร่เมื่อ 5 พ.ค. 2019
- Installing focal bam sound deadening in the doors of my ford ranger raptor and explaining a few things about speakers, acoustics and and how sound deadening works
- ยานยนต์และพาหนะ
I'm about to do the same thing to my US spec Ranger. Thanks for the video and information. Your Raptor is awesome.
Thank you for this! I just finished doing this to the my doors
. I must say that sound quality has greatly improved! I got to do all 4 doors in 1hr 30mins.
I just did my front doors on my ranger 2018. I used your video as a referenc. Im amazed with the sound improvement and the outside noise cancellation. will definitely do the rear doors soon.
Just what I have been looking at doing on my PX3 wildtrak to compliment my Focal Flax speakers.
Thanks for the Vid 👌
No worries, hope it helps
Great video, unbelievable how cheap the doors sound before install and how premium the sound after. Thanks for sharing 👍
BootneckSA80A2 cheers for the compliment mate
Great video, man! Good info on the Ranger door panels and a few good chuckles in there too.
Thank you for you're Videos I like them very much very helpful for me. I'm not an mechanic but with you're videos it's a lot easier
Thanks Jacob, great video, good to see how you take the trim off, I am always afraid I am breaking something when I do it.
Jacob awesome vid ,just amazing yr fine tuning of yr Raptor.
Thank you so much for this very useful video to know how to take off a part to install step by step
Doing the same thing to a car, found if you use one of the bigger trim panel take off tools, it helps smush it in the corners for better coverage
Nice job dude. Keep the clips coming.
Cheers mate
Very informative vid,man! Thank you! Subscribed! -form the Philippines
One Juan Miguel thank you
I just finished doing this to my North American Ranger Lariat SuperCrew. I bought 36 square feet of Kilmat for $60 from Amazon and needed almost all of it. When I removed the plastic door panels, I disconnected the door handle and power window controls, but left the lock switch/fiber optic cables installed. There's no need to risk breaking the fiber optic by disconnecting it. You can swing the plastic panel out of the way and place it inside the cab without disconnecting those cables. I didn't need to remove the B&O speakers. There was zero sound deadening material inside my door panels unlike the Raptor in the video, front or back, just the foam glued to the outside. The only tools needed are a screwdriver with a T20 Torx bit, and a hooked metal pick to remove the panels inside the door handle.
Congrets to your 1.000th subscriber! You earned it! 😉🎖
Copper and Brass cheers mate
Very useful video, thanks for upload 👍👍
Thanks for the Videos mate keep it coming cheers 👍👍
Be keen to see a vid if you do the roof! Agree with you on the Focal speakers, by far the best choice.
Jason O unfortunately I lost all the footage of me doing the roof. Not that it was great quality though wasn’t much room to film and do the work
Hi Jacob great content I just wanted to know if sound deafening your ranger has helped with the platform wind noise??
Have you done the roof lining yet very interested!
Hi! Im planning to do this on my everest, just one question, do you think covering the door "cavities" or opening with the sound deadening material will help improve the sound quality even more? I've seen some youtube videos whos done just that. The idea here is to mimic how speaker encolsures work to improve bass response. Cheers to you mate!
Hi !
Thanks for your video.
Sometimes I can hear motor vibrations in the speaker on the right side when I drive my Raptor.
So I just would like to know why this happened and how to erase that noise...
Great video and it gave me the confidence to remove the back Super Cab door panels. It was pretty straighforward on my 2021 Ranger, but a few of the clips popped off and ended up on the ground. Just to check, do you think stuffing the cavities (no up/down windows) with sound deadening insultation would help/hurt? thanks again for this really thourough video and also thanks for the insights on the paper cones...I was aboiut to swap mine out for some plastic ones, but now I will end up keeping them. cheers!
Do you have a video of the rear back wall panel sound deadening install? I did not see it, perhaps you have not done that yet?
I am working on a 1998 Ford Ranger. Do you put the sound deadening on the bottom on the inside the door or leave that alone for any water that may get in the door to drain out?
Nice once Jacob - keep them coming. Cheers Clint
Ford really have something to learn
g'day, nice truck! wish they had those here...
Cheers mate. But you guys have soo many better Utes/Trucks to choose from
hey mate! would love to see some sound deadening in the ceiling lining. If you ever get the chance I'd love to see how its done.Thinking of doing it on my ranger.
Same sentiments!
I have the 2021 px3 ford ranger xlt and the doors seem to have a very slight buzz when the system is turned up at about half way and the music has some bass.
Metal and rock seems ok.
But yeh a new vehicle you would not expect to have no buzz In the doors.
The sounds seem to be coming from the top part of all 4 doors.
Do you know what could be causing the buzz in this area?
Also, what do you think of the Alpine r speakers kit that is specifically for the ranger? Are they worth it ?
The buzzing is usually a result of reverberation especially at certain frequencies sound deadening especially foam help stop that by dulling the sound wave that kit the metal skin of the doors, i have installed alpines in Rangers before i dont mind them, but they do seem to lack base and treble unless they are amplified
@Jacob’s Garage yeh the factory system seem to have decent amount of bass I was quiet surprised actually.
Would the Alpines have better bass than the stock speakers?
I don't want to run an amplifiers the stock head unit is plenty loud enough.
The buzz sound is more of a plastic buzz than metal if that makes sense.
Great vid mate, very informative and clear. How long did doors mod take you?
Adem Spahic honestly, I do it as a job so maybe 2hrs but someone just starting maybe a full day
@@jacobsgarage5458 appreciate the reply.
Hey mate, do you think using focal bam on the floor or dynamat? Cheers
Id use dynamat for the floor because it’s thinner and won’t make it hard to refit the interior although depending on the vehicle they usually don’t require the floors to be done
Cheers mate, I’ve got a 2021 Ranger FX4, I’m going to replace the carpet with rubber flooring for work purposes so thought I’d do it while in there.
I would choose a blue raptor too
420 likes 😎
What's up with accent
Foreigners tend to have those