A zero till John Deere drill arrives plus slugs look to be a big issue this Autumn
ฝัง
- เผยแพร่เมื่อ 16 ต.ค. 2023
- Wheat drilling is all done and this year we had a zero-till John Deere drill on trial. Find out how it works and I explain why slugs look like they're going to be a problem this Autumn.
I used this method 21 years ago in Australia. The field was 3km long, all GPS controlled. 60 foot wide driller. No rolling required!! Good to see it in the UK.
Harry, You don’t need an almost £100k 4 metre Direct drill for your farm. A mounted 3 metre version would be ample for you. I’d strongly suggest a Weaving GD 3000M with 22.5 degree angled discs. Less than £40K.
Open slots after the drill are not good for deterring slugs and dry out in a drought, killing the seed. That is where the GD scores and it is made locally at Evesham.
If you chops tree down with an axe, you don’t drive it in at 90 degrees to the trunk. You go in at an angle to get penetration. Hence the use of the GD angled discs. You won’t need to roll it afterwards either! The drill wheels close the slot, crumbling the soil around the seed and roll it at the same time. Job done!
Hope Harry reads this comment by you.
Ya but bru... deere 😂
That green paint is expensive stuff.
British made and not the "right to repair" antichrist that is John Deere!👍👍
Who says he's buying it? It's just a demo and is good content apart from anything
I live in Thailand and the farming here is amazing. To avoid grass mix growing with the rice, they plant the rice seeds in sort of nursery areas. Then when the rice is about 150 mm long, they crouch down and pluck every stalk out of the ground by hand. They form bunches of stalks and keep the root part in puddles of water for a day or so. Meanwhile they plough over the land where the rice will grow to maturity and that deals with the grass and weeds for a while. Now they replant each of the thousands of stalks by hand into the newly ploughed ground. The grass and weeds will now try and regrow but be smothered by the rice. As the rice grows it takes on an almost dayglo bright green hue. Eventually when the rain stops, the rice will turn brown and be ready to harvest. Much is still harvested by hand scythe. It is hot, back breaking work, and you must cover every inch of skin to avoid contact with the rice or you become horrendously itchy. Once the harvest is complete, those with buffalos, send them into the fields to eat the stubble and fertilize the soil. The farmers used to like having plenty of children to help with all the work. Now as machinery is rapidly taking over the farm work, the people birth rate is going down as machinery use goes up.
Theres a lot of work growing simple rice !
As people become richer, and life gets easier, they have fewer children. But if you look at the developed countries, it's all going wrong. People become decadent. Ageing population, too few of the new generation. This is the winter of civilization for the developed nations.
That's really interesting, cheers for sharing. Would be quite a machine that was able to lift, turn and re-plant all that rice. Presumably in quite wet fields too? Wonder if anyone is working on solving that.
@@paulhudson8342 I had to ask my Thai wife about that. The replanting method is only needed for fields that dry out after the planting is completed. I have seen a video where the shoots are raised in what looks like egg boxes. Then a machine can replant them. However, the Thais that I know, are quite happy just to perform the tasks as part of the farming traditions. She says they don't need to change. However, with the newly affordable portable water pumps, they can keep more of the rice fields flooded. In those cases they don't need to do the replanting method they just keep the field flooded and that kills off the grass whilst the rice thrives in it.
My poor dogs got dragged round the fields on their walk because I had a notification of a new video. The farmers round here seem to be moving towards this style of farming and your videos are great for educating me about the rural area where I live. Thank you Harry.
We’re you afraid the video would somehow disappear?
Every time I watch your channel I wish I had become a farmer!!! Loving the videos Harry, well done
Lol I watch and I'm glad I didn't become a farmer.
Every time I watch these videos i'm glad I got out when I did. Don't shut the gate yet Harry, I reckon you will have at least one more Slug pellet application, if not two. I'm old school, plough, drill, roll. Never had a slug problem, or a black grass problem either.
hi Harry,I have an arable farm at the bottom of the south island,New Zealand, I have tried direct drilling(great plains drill) as well as surface incorporation of straw,the resultant crops always yeild substantially less than when the ground was ploughed (burying chopped straw) or when the straw was burned then top worked. For context we're on heavy soils 1000mm annual rainfall mainly autumn sown,wheat averages 12.5 t/ha milling oats average 9t/ha,so lots of straw to deal with, our yeild penalty for not ploughing/burning is 10-20%,which pays for an awful lot of diesel
Love the Monty Python reference! "Ex-slug"!
You Harry and that old boy with the bees make a pleasant change from all the rubbish that has been going on for the last 13 years. 😄
Harry asks all the right questions and won’t be fooled 👍
Learning about farming makes me appreciate more the food i eat everyday, thanks Harry and Charlie
John Deere is the Apple of the farming world. I got the impression Harry knows this all too well and is wary of getting roped in by their business plan.
Isn’t the big things about John Deere repairability? Basically every single phone brand has horrible repairability
@@Im_helplessI can’t tell if you’re saying that Deere is good or bad about repairability, but the fact is that they’re awful. They have multiple class action lawsuits against them based on right to repair, and multiple US states are targeting them with laws
@@marcob1729 not American idk dick about John Deere, all I hear about them is that they have horrible repairability
@@Im_helplessNew Holland and Deutz Fahr & Versatile here... All good. Especially the big Versatiles are good to work on.
Great video Harry. I design for a manufacturer in Yorkshire and we've been manufacturing low disturbance subsoilers for many years. Some that work alone and others you can pull the drill directly behind. They're becoming very Popular as people go down the min till / no till route.
Agriweld by any chance???
Harry creating worm paradise. Unlike my local farmer who still uses the heavy plough 🤷♂
Slug bait also kills worms.
Just for interest Sam Moore from Ballymoney, Co Antrim developed the uni drill for arable production in the 1970's. It has taken many years for widespread adoption to really take off using this method to avoid hitherto soil tillage techniques which severely affect soil structure.
Possibly a new sideline for Harry slug racing on their little own motorway😅👍🏻🏴
Great enthusiastic content Harry.
As a chartered accountant who has never taken an interest in farming, I find your videos fascinating, especially the legislation / costs / subsidies / Govt intervention. Keep up the good work!
Over the course of the winter it might be an idea to do some "Car review" style videos on the machinery and equipment you have on the farm i think that would be very interesting.
Love direct drilling, it's not suitable for every land but a great concept, and I believe the way forward. Slugs are a menace and this year has been perfect for them, I can't remember seeing more! good luck, great video as always
From my extensive knowledge acquired from Farming Simulator 22, i can confirm that a no till drill is a game changer. 😉
Great stuff Harry, here in Australia direct drilling is the norm now. I’ve still got an old planter for our farm but we’re not upgrading as we’re selling up soon. Great to see things progressing in the old country.
Another educational update, really enjoy the content. Please keep the videos coming 👍
Definitely put out more slug pellets, and don’t be surprised if you need multiple applications in the first few weeks. After owning and using this type of drill for several years in our broad acre farm in Australia, it would be best to really keep on top of the slugs. They were the hardest problematic thing we had to deal with using the type of drill because it doesn’t disturb the soil much at really. And at harvest time make sure your spreader and/or the chopping system is working properly. They won’t put seed in the soil if the individual row has to roll over large clumps of straw, as it will lift the row up out of the ground. But they are fantastic it dry finish years, where any moisture you can keep in the soil really counts at harvest time. We found that side by side with a filling drill the HD drill would always put yield it. Always, in multiple years and multiple crop types. Good luck for the rest of the season. 👌👍
And yes, that open slot is not a great finish to the row, but the seed is buried off to the side of the trench, not straight at the bottom. But the rear closer wheel can and should have been adjusted to leave a bet finish. It’s just a bolt with washers as shims, so you can adjust them to what you prefer. Easier when you is. The machine!😉
This channel provides great education as well as the people such as yourself that share more info for us normies to understand how our food is grown, thank you!
Gosh from watching it looks very much like you'll be spending some pounds and buying that John Deere unit!
Another great watch sir, for this non farm-boy!
In North America John Deere has been marketing that style of drill system since around 1990 for planting soybeans and cereal crops. It’s extremely popular. I’m surprised it’s not more common in the UK
It is amazing how efficient all those machines are. It is like spray-painting the landscape.
Today's Satellite Guidance Packages can achieve accuracy levels down to 2.5cm, thus almost eliminating overlapping of seeds, Fertiliser spread patterns and over spraying. It could be described as the Green Revolution brought to its ultimate conclusion.
Hi Harry. You may find that the pre-ems don't work as well on the direct drilled land because you are spraying on to the straw rather than the soil.
Another farming school day for me, love it!👍
I find the conventional/min till/no till argument interesting. I guess it's a bit of a balancing act between lower diesel/energy use, soil and pests advantages/disadvantages and the initial cost outlay of newer more specialised machinery which can be used multiple times of course.
All this high tech...As a kid I can remember the farmer who owned the fields behind our house using a Ford 5000 tractor... it was down to the skill of the driver to get neat straight and parallel rows. These days you only need to be in the cab in order to turn it around at the end of a run as all the computers do the rest... and I bet it won't be long before that gets automated so you'll have driver-less tractors. I'm not a farmer, or connected to the industry in any way, but I do love these videos..Thanks Harry
Can't wait to see the difference in that field. I've heard that with no- till farming you can plant more crops in each year and have less erosion.
Very interesting as always, using the minimum cultivation system, and a very wet year the slugs really are a problem with the additional trash left on the surface it becomes the perfect environment for these pests.
P.S.We were using a direct drill 55 years ago here in the U.K.
Great video. Well explained. The Deere 750 drill has been available for years and has stood the test of time. I remember Massey Ferguson with their 130 Drill in the late seventies promoting Direct Drilling along with ICI and Gramoxone. Fascinating to see the choices available.
I had some of those Mf 130s in Northamptonshire, they were reasonably successful in dry conditions ,I sold them to a guy in Portugal,
Always interesting Harry and presented with a clear passion. I enjoy your ability to have a sensible discourse with differing opinions and approaches. Thanks for posting.
I first come across zero till drills when I was in Ohio in 1998 they had been established on that farm for several years. For certain soils I think it’s the way forward. Once again excellent excellent video thank you Harry
I've always asked for a video on new machinery. I would never thought of it being done in such a way, as in this video. Thanks, Harry. btw I can see why there are accidents with machinery. Complex and brutal looking.
Just a co incidence........Eastern poland......never seen so many slugs....(the orange ones) been here 14 years. We have had no where near as much rain as UK? Winter wheat is about 2-3 inches tall now. First really foggy mornings this week...pink/grey sky at night every night.
Slugs around us are rampant, plenty try to cross the lanes which saves on slug pellets 😊
Another very good informative video 👍🏻
Very interesting and informative.
As always, detailed and very informative! *****
Great content Mr H
As usual, a great video and educational as well.
Love the updates on the farm Harry!
Very interesting video Harry 👌🏻😍
Great to see zero til in UK. Here in western Canada this is the default seeding set up. The benefit is the soil has all that lovley roots from previuos crop in place adding to more material in soil. This also reduces tillage and here in Western Canada provided retention of moisure .
Lovett Harry so interesting thank you
Fantastic insight. As an office worker this Chanel is fabulous. I remember a while back you recommended buying rapeseed oil..... How right you were. Prices went up. I always spread the word and always try to buy British and support British farmers both arible and livestock.
Excellent video Harry, thank you
Great video as always. Thanks
Like your show Harry. I am In Australia 🇦🇺 actually but it's great to see how u blokes di it. Good program and thanks Harry
As a Midwest American we take a lot of pride in John Deere. They’ve faltered a bit recently but still great machinery
Half a Fanny for John, George and Harry for Drilling the Winter Wheat! 🚜 🌾🌾🌾🌾
Fascinating as usual. Be interesting to see how the new drill compares.
Yea buddy, Go Deere!! My pops works for them. Nice to see some green n yellow on Harry’s farm
so educational and interesting
Thanks for that Harry. Was very interesting to see the direct drilling. I wander what the life of the discs are in stoney ground and what the mechanism is to let the operater know if any seed tubes get blocked.
I did ask about blocked seed tubes and there’s an optional sensor system you can fit to alert you in the cab of a blockage.
I actually edited this bit out because I thought only me would be interested in such things but judging by your comment, maybe not!
Always very interesting stuff. presented nice and easy still. Thanks Bob
Great video, thanks Harry. I enjoy your discussion of the farm just as much as your cars.
Think you’ll like a horizon drill. Built in the uk. Support British from field to fork. 👌
What an impressive tractor drill combination complete with Satellite guidance and digital drill calibration. Great Stuff!👍
Looks like a good idea. Buy it !
This John Deere tractor sounds VERY halthy!
Really good point about the seed type Harry wonder if there has been any detailed tests done on glyphosate absorbtion
On the US western high plains we direct drill into stubble. We plant direct;y into standing stubble to save moisture. The openers will usually follow between the previous rows. Many use a 18M JD single disk air drill.
We have a few ‘slugs’ up here in Scotland.
Our garden is full of them and they somehow find their way into my garage and my Vermicompost bins. They are part of the decomposition process but some species predate on my worms. Not a fan of them then. I have an outside Vermicompost ‘bed’ they are in there helping out I guess.
If you send me you address Harry I’ll box up a couple of dozen kilos and send them down to you..
As ever a great video Harry.
Have you ever grown corn?
I’ve been waiting for the fields nearby to see how the corn is harvested. Today they started. It’s a wonderful sight to see, a well organised stream of trailers all day.
I look forward to seeing the results. Hope it does well for you.
I saw direct drilling for the first time in Hampshire the other day - straight into a cover crop. Fascinating to see and hear of these techniques.
Yet another great video thank you Harry
Very interested to see the yield difference between the two drills
Excellent video the John Deere rep knows his product well
I wonder how many men would have been needed to work a farm this size 100 years ago....
You should come to Western Australia next June and do a vlog on large scale direct drilling.
Thankyou andyrbush inThiland for all that info of growing rice an how to deal with competing weeds.
Harry channeling his teenage python influences: "That is an ex-slug". Very informative as usual.
I remember direct drilling of grass on grass in the late 1970's after it had been sprayed off with Gramoxone (Been banned in the UK for many years now) this was for silage so I guess no till drilling is nothing new.
Harry I just wondered if you direct drill year on year will you not get problems with ground compaction ?, I myself have worked in traditional arable farming methods for many years, cultivating, plugging ect...
Damn, that is more rock than soil. The subsidy must be incredible to farm that.
it is amazing
When you have a lot of straw to deal with particularly with a disc direct drill I understand hairpinning can be an issue so anything so any additional spec on the drill to avoid that would probably pay dividends.
TH-camr , Jake Freestone , Videos are worth a look he sows clover along with the wheat , some free N and more root mass. Harry can you give us an update on your solar panels . with the lack of sun this summer, would be interesting to no the results .
I have seen John Deere drills in New Jersey on utube with one lonely farmer drilling into massive meadows and cover crops and then spraying the cover crops with glyphosate
I could watch that technology described all
Day.
Love the drill! John Deere do have some software issues....
Interesting to see how this zero till trial works out. I have some doubts about the control of plant diseases when the crop residue is not incorporated into the soil. Also is there a risk of the soil becoming highly compacted over time? Pros and cons, I guess.
We’ve been zero till for 12 years. Last 2 years we’ve started to subsoil for that very reason. Yield drop off is shocking
Years ago the theory was ploughing helped the drainage of the soil........good drainage very important in a wet winter
In all the year's we farmed, we never once put a slug pellet on 1 acre of our 225 acres of crops, we also ploughed every acre... every year, and worked the land to a fine seed bed so the slugs couldn't work in the soil, once you've got clod's.... you've got slugs.
Did you stop growing crops
Father passed away.@@tom4412
Interesting video. Back in the 70’s I did direct drilling with a bettinson direct drill and also minimum cultivation using Howard rotavators and heavy duty spring tine cultivator. The direct drilling was difficult where straw was present and we would burn the straw using both methods however the combine didn’t have a straw chopper or spreader so the best method was to bale the straw and cart it away. A good straw burn was best but is now not allowed. My overall winner would be minimum cultivation which dealt with the stubble left after baling. A bettinson direct drill was a heavy drill but the slot was often left open as it used a cutting disc and two side discs to plant the seed. I noticed the JD drill did the same in your video so I’m not altogether convinced it would be good in your stoney soil and you may be better off minimum cultivating and then drilling. 😊
Great video harry, be interesting to see the results from different drills, finally Charlie is revealed as your camera man. Is the whole farm wheat?
Farming wearing a Panerai! Nice!
Very impressed with drill i think you will need more chemicals and what worries me is that slot it leaves with the seeds in all the rain after drilling on heavy land thst would just stand in water pros and cons 🚜😀
Enjoyed
Harry your videos are so educational - they are brilliant! Indeed I work in Africa and often point policy makers and government ministers in your direction to give them some context. Direct drill is critical to more sustainable farming - just need to bring in some livestock post harvesting to reduce some of your glyphosphate needs and reduce your fertiliser inputs. Power from an H2 fuelled tractor and you will be farming well into the 22nd century!
Don’t buy one but get a contractor in. They can justify a bigger one and do it faster without you having to tie up all that capital and it sits unused for 50 weeks of the year in a shed!
My dream life, farmer and car enthusiast.
Have been direct drilling for last 7/8 years. This is first year with new Horsch Avatar drill. Very similar in design to the JD one but 12m in width. Gets on with the job. Also we are struggling with slugs on last years OSR ground. Hardly any on old Bean ground.
Looks like the next Harry's garage will reviewing a John Deere Tractor 😆
What type of pre-emerge do you use ? By the yellow colour of the mist by the sprayer, I would guess pendimethalin?
its amazing how Britain is only starting to go this way. my father started doing this over 25 years ago in australia. we use john deere everything but the last 8 years we have been using boss engineering air seeders towed behind their planter(australian made)n all gps controlled.
Very good, thank-you. No till. Mext no spray?
Good Tech, I am Wondering why the makers of all the attachments still have those two side lock down spacer ground guide wheels for the spacing of the rows when every modern tractor now uses GPS to do the rows? Seems pointless to have a old guide system when it will not be used. Better to stop fitting them.
The man next door had slot seeding done and nothing grew. I think the contractor put the seed in too deep. Expensive mistake.
Great video. The JD drill is expensive for what seems a basic structure albeit high quality and computerised but over the years it cuts out the diesel bill for cultivation and also other associated machinery costs and factors such as labour and narrow weather windows so maybe it’s a relatively cheap and good option. Keep up the good work and good luck with the crops.
Not sure any drill will work in that field any better than any other. Its more rock than anything else.