Super nice looking plane, well done! Pls don't forget this littles holes at the fuselage and wing glue joints, where you can insert a piece of filament, to align the parts while gluing - like the Grom has. This very helpful to align the parts well!
An amazing design and an awesome overview of the design. So much to like about this design. :) Flys and handles so well in initial testing. So well done. For sure, I thought you were going to loose it at 12:30, as inverted and so close to timing the grass. Regarding reworking the fuselage for balance, another option might have be to add twin motors to the leading edge of a shorter fuselage edition (12:45). To reduce drag, it might be possible to design the 900MHz antenna into one of the vertical fins?
Question on the settings for the Wing Right and Left 1. What wall thickness do you have? And the weight that you have on the print chart shows 69Grams is the total including the controlled surface?
actually printing this now! But i fly walksnail now. any suggestion on wich nose (fuse 1) to use for walksnail? i have some 2212 in 1200kv and 1400kv here, are those okay and what prop size then? Loving the print so far and your video's!
have a look in the extras/SCM folder, there's an adapter for the WS cam ! with these motor I guess a 7" would be fine, with 4S ? or even 8" maybe for the lowest kV ?
A great video! And a pretty amazing plane! It would be really nice if you did a video on what printer your using, it's setups and such, I've been a long time builder, and just starting to look at the 3D printed planes. I noticed your plane on RCG which led to your videos. One thing I really thought impressive was the wing extenders!! What a great idea! Thanks so much for all your hard work doing these videos and all the work you have done designing the plane! I think it would be interesting to design and print one. Will get the downloads and do a print!! Thanks again for all your work and sharing with us!!! w
Wauw, that's a beauty, nice aerodynamic frame. Very important for me :) Doesn't drop nose in tight curves and effective wings, also important. I'm using the Emax ECO II 2807 1700 KV with the 7042 Gemfan Flash on my Dolphin. Max speed around 170 kmh @ 25 amps. Enough static thrust for a 100% thr @ 45 Amps start. Curious to see the max speed with your new motor. Lost interest in 3D printing, but slowly dusting off my Ender 3😊
Hi~ Very impressive work. May you provied ribless version of Rifter 2? I am on Bambu Lab and it can't print the stl with ribs very well. Ribless version (in another your work) works fine for me.
Un grand bravo pour la conception ça montre une vrai détermination vraiment félicitations et merci beaucoup pour le partage je suis en train de l'imprimé hhh
Merci !! J adore tes montages et là tu m as encore bluffé !! Superbe travail et en plus tu partages. Il faut des gens comme toi en plus grand nombre. Je vais tester ton modele et voir si mon ender 3 s en sort bien 😆. Encore merci 🙏🙏🙏
Awesome work, Very well though out design! I’ll have to pick up the plans when they are available. My dolphin is starting to get beat up some and working to get my voron up and running so this should be fun project!
@@Olivier-C Awesome, I just downloaded it. I like the ability to have wing extensions, might be able to utilize that for a tail boom mod like the drak.
Looks like a fun project, congratulations! How are the low speed characteristics/handling? Cruising on 4A or so, near stall? What is the lowest speed it can handle?
Flies really well, like a dolphin that glides more. The airfoil is really good. Cannot trust the amps displayed in this video, I think something's wrong with the calibration, 70A max draw seem way too high, in real it's probably more like 45A top. with the 2806.5 and 7" it will probably cruise at 3-6A yeah, with a decent speed. There's not much drag. And in theory it might work without the 2 stabs, not tested yet. Stall speed is a classic 30-35km/h, gentle dive down like all forward swepts, no flat spin
Thanks. A very beautiful plane, I started typing and will try to show the result on my channel. In the next version, I advise you to add internal ribs to the stabilizer. 😉
Great video on your build. I like the design of the plane, so I made 3D printed one also. since the aircraft has a long noise, where did you measure for the CG on yours? my build seems to be nose heavy.
J ai vu que tu as prévu un emplacement pour le Vtx, penses tu qu'un Vista puisse se mettre aisément à l avant car le cable de caméra est court. Merci à toi 🙏🙏
Le nez est assez long, il devrait y avoir assez de place pour le VTX DJI et une batterie de taille raisonnable je pense. En plus ça fera du poids à l'avant, c'est bien. Toujours le meme probleme avec ces planks, faut charger le nez
Top, sacré boulot ! Quand tu auras trouvé le bon compromis... tu pourrais faire des moules pour faire du moulage carbon (voir Ramy RC) et gagner des grammes dans ton avion.
excellent. je pense que je vais essayer de rajouter un controle de la derive car c'est le truc qui m'enerve trop avec les ailes, je pilote en 3 axes. mais vraiment joli. moi qui cherchait desesperement un talon gt rebel je vais peut etre partir la dessus finalement. (en plus j'habite pas loin la bas au bout droit devant quadn tu decoles hehe)
En effet on est quasi-voisins ! pour la dérive le plus simple je pense c'est d'en rajouter une verticale au centre. J'avais hésité à faire ça optionnel à un moment, mais au final décidé de simplifier. car mettre 2 dérives sur les stabs existant ça ne serait pas top, ils ne sont pas à 45°, il y aurait fatalement du pitch induit. A noter que le profil et la géométrie de l'aile sont fortement auto-stable, ça va résister fortement à l'action de la dérive.
@@Olivier-C Humm en théorie du moment que les deux dérivés tourne t d'autant la partie pitch s'annule ne laissant plus que la partie dérive. Après pour le coup du profil auto stable j'avoue que je ne sais pas.... Humm dur dur. Mais j'ai déjà trouve une idée pour loger les servos j'ai vérifié avec tes stl et ça pourrait passer.
@@Constancegrace001 PLA+ is also PLA, just it tends be of better quality and better specs, so I guess some good PLA should be ok ? But over all the dozen brands of PLA I have here, the esun PLA+ gives the better results for sure
On doit pouvoir adapter des charnieres nylon classiques je pense, ca doit passer. C est quoi le probleme avec le TPU ? Car ca s imprime aux meme temperatures que le PLA+. le moteur qui n arrive pas a pousser le fil plus mou ?
Er are ugly spaces between the win Parts. Is this Warping of 3d print? Possible to build it without this? Or is this an Design failoure or is your Printer not the Best or not perfectly calibrated? Or is this the "poor" designet? So cool plane i plan to print my own plane next. I am interestet on craycle crow racer 750mm
I think you should tape the Elevon hinge gaps. Air will bleed from lower surface to upper through that gap. Reducing response and causing some drag...Looks a promising build to me, no real vices so far...🤔😳😀🇬🇧🇬🇧🇬🇧
Amazing design, i always wanted a plane like this, and thank you for sharing the 3D files, Respect.
Very nice presentation of this project! I like it, especially the shape of the fuselage.
Super nice looking plane, well done! Pls don't forget this littles holes at the fuselage and wing glue joints, where you can insert a piece of filament, to align the parts while gluing - like the Grom has. This very helpful to align the parts well!
It had that at some point, but on the fuselage that's not needed, bottom is flat. On the wing there is 2mm holes yes
Un boulot dingue en un temps record pour un résultat au top. Super maîtrise de tous les aspects de ce hobby. Félicitations 😎
Hey Olivier, awesome project. Plane looks super nice! Congratulations.
Hey Daniel ! Thanks, I finishing another one at the moment, nano bimotor
this plane is a real beauty! Thank you for this insightful video and the links to all parts!
You did a lot of work and the result is impressive!
Enorme ! incroyable ce defrichage express de la techno et la modelisation de cette belle bete ! On vit dans le futur 😜
What an amazing contribution! thanks you very much for that insane design 👏
Excellent looking and flying plane. Thank you for the detailed view of the design and build
You did such an amazing job on this. Examining the files and just so impressed.
man, by the looks of it this adresses most of my concerns with both orca and grom. will surely get it as soon as it's going to become available!
Grom flies great I like it, just it was a bit too large for my taste (and backpack for this winter). I added the link to the files in the description
@@Olivier-C thanks for the link! Grom is a bit heavier than it needs to be.
Magnificent to build and fly your own aircraft
Awesome looking design! Looks like it flies really well.
Awesome design and impressive engineering!
Superbe vidéo. J'en apprends tous les jours sur cette pratique du fpv. Merci. Je me lance sous peu ! Mais soft..
amazing work! the plane look amazing!! can't wait to have the STLs to print it!!
Tomorrow I'd share the package, need to adjust few details
I added the link in the description
Bravo pour la conception!..et la réalisation de la vidéo top 👍 je vais télécharger les fichiers !
An amazing design and an awesome overview of the design. So much to like about this design. :)
Flys and handles so well in initial testing. So well done. For sure, I thought you were going to loose it at 12:30, as inverted and so close to timing the grass.
Regarding reworking the fuselage for balance, another option might have be to add twin motors to the leading edge of a shorter fuselage edition (12:45).
To reduce drag, it might be possible to design the 900MHz antenna into one of the vertical fins?
Question on the settings for the Wing Right and Left 1. What wall thickness do you have? And the weight that you have on the print chart shows 69Grams is the total including the controlled surface?
actually printing this now! But i fly walksnail now. any suggestion on wich nose (fuse 1) to use for walksnail?
i have some 2212 in 1200kv and 1400kv here, are those okay and what prop size then?
Loving the print so far and your video's!
have a look in the extras/SCM folder, there's an adapter for the WS cam ! with these motor I guess a 7" would be fine, with 4S ? or even 8" maybe for the lowest kV ?
A great video! And a pretty amazing plane! It would be really nice if you did a video on what printer your using, it's setups and such, I've been a long time builder, and just starting to look at the 3D printed planes. I noticed your plane on RCG which led to your videos. One thing I really thought impressive was the wing extenders!! What a great idea! Thanks so much for all your hard work doing these videos and all the work you have done designing the plane! I think it would be interesting to design and print one. Will get the downloads and do a print!! Thanks again for all your work and sharing with us!!! w
Bravo pour ya conception 👌
Superbe boulot 👏
Et ça vole super bien 🥰
Wauw, that's a beauty, nice aerodynamic frame. Very important for me :)
Doesn't drop nose in tight curves and effective wings, also important.
I'm using the Emax ECO II 2807 1700 KV with the 7042 Gemfan Flash on my Dolphin. Max speed around 170 kmh @ 25 amps. Enough static thrust for a 100% thr @ 45 Amps start. Curious to see the max speed with your new motor.
Lost interest in 3D printing, but slowly dusting off my Ender 3😊
Hi~ Very impressive work.
May you provied ribless version of Rifter 2? I am on Bambu Lab and it can't print the stl with ribs very well. Ribless version (in another your work) works fine for me.
Un grand bravo pour la conception ça montre une vrai détermination vraiment félicitations et merci beaucoup pour le partage je suis en train de l'imprimé hhh
Merci !! J adore tes montages et là tu m as encore bluffé !! Superbe travail et en plus tu partages. Il faut des gens comme toi en plus grand nombre. Je vais tester ton modele et voir si mon ender 3 s en sort bien 😆. Encore merci 🙏🙏🙏
Awesome work, Very well though out design! I’ll have to pick up the plans when they are available. My dolphin is starting to get beat up some and working to get my voron up and running so this should be fun project!
I added the link to the package in the description !
@@Olivier-C Awesome, I just downloaded it. I like the ability to have wing extensions, might be able to utilize that for a tail boom mod like the drak.
Amazing plane, great work with the design. I cannot print it on my Prusa Mini, it can only do 180mm "cube".
Looks like a fun project, congratulations! How are the low speed characteristics/handling? Cruising on 4A or so, near stall? What is the lowest speed it can handle?
Flies really well, like a dolphin that glides more. The airfoil is really good. Cannot trust the amps displayed in this video, I think something's wrong with the calibration, 70A max draw seem way too high, in real it's probably more like 45A top. with the 2806.5 and 7" it will probably cruise at 3-6A yeah, with a decent speed. There's not much drag. And in theory it might work without the 2 stabs, not tested yet. Stall speed is a classic 30-35km/h, gentle dive down like all forward swepts, no flat spin
beautiful model - lots of design and printing hours paid off - whats the ideal print filament - pla/petg/carbon?
Its designed for PLA+ (eSun is the brand I have). I don't know about PETG, a friend of mine tried that and seemed to work, but not sure
absolument génial. Ca donne envie d en avoir un.
Je n'ai qu'un mot pour ceci : excellent !
Thanks. A very beautiful plane, I started typing and will try to show the result on my channel. In the next version, I advise you to add internal ribs to the stabilizer. 😉
Its dual wall, rib not really needed
Awesome job, makes me want to print one
Great video on your build. I like the design of the plane, so I made 3D printed one also. since the aircraft has a long noise, where did you measure for the CG on yours? my build seems to be nose heavy.
there's 2 bumps on the underside of the first wing panels, for CG ! 0 to 5mm behind theses marks
@@Olivier-C Yes, I located the bumps for the CG, Thank you for the information.
You should continue to make even faster more wind resistant fpvs I love to see your work
Because your vids I got a Dolphin, Now I have o print one !!!
Thanks for your tutorial.
Thank you you are one of the few that share
Excellent work!
c"est génial, une super experience, je suis un acro des ailes volantes, Elle me tente bien celle la, Sinon super boulot, j 'adore
C'est vraiment vraiment cool tout çaa !!
13:33 the way while you holt this Parts together, I Got a cool Idea of Twin Pusher or something. With 2 Fuselages and a middle wing Part
J ai vu que tu as prévu un emplacement pour le Vtx, penses tu qu'un Vista puisse se mettre aisément à l avant car le cable de caméra est court. Merci à toi 🙏🙏
Le nez est assez long, il devrait y avoir assez de place pour le VTX DJI et une batterie de taille raisonnable je pense. En plus ça fera du poids à l'avant, c'est bien. Toujours le meme probleme avec ces planks, faut charger le nez
@@Olivier-CMerci pour ta réponse. Tu as une cagnotte pour verser quelque chose dessus ou tu vendras tes stl ? Avec tout ce boulot c est mérité !
@@GuiOhm_FR merci, mais pas de cagnotte, et tout est gratuit :)
impressive and... what a beauty! I am curious to see if it can withstand a landing in a tree! I am guilty to want to print one.
Landing in a tree was not really in the list of requirments, but only way to know is .... try ? :)
Top, sacré boulot ! Quand tu auras trouvé le bon compromis... tu pourrais faire des moules pour faire du moulage carbon (voir Ramy RC) et gagner des grammes dans ton avion.
Would it be a good idea to print it out of PETG for higher resistance?
beau travail pro de chez pro 👍👍👍
Cette stabilité est top !
Great plane and design, how does it behave in strong winds?
Behaves same as a dolphin, same design and better airfoil, so its quite stable
No words, great design, grat job, very well done , you are the best !!! Curiosity...it could be done in ABS?
Thanks! ABS I guess yes, hard to say, made it for PLA but people have printed that with PLALW, Petg maybe, and other plastics
hello how much time use lion and lipo thanks
Thought you'd be wanting Walksnail, it isn't limited to 13kms range ..?
And it has OSD....🤔😳😏🇬🇧
excellent.
je pense que je vais essayer de rajouter un controle de la derive car c'est le truc qui m'enerve trop avec les ailes, je pilote en 3 axes.
mais vraiment joli. moi qui cherchait desesperement un talon gt rebel je vais peut etre partir la dessus finalement. (en plus j'habite pas loin la bas au bout droit devant quadn tu decoles hehe)
En effet on est quasi-voisins ! pour la dérive le plus simple je pense c'est d'en rajouter une verticale au centre. J'avais hésité à faire ça optionnel à un moment, mais au final décidé de simplifier. car mettre 2 dérives sur les stabs existant ça ne serait pas top, ils ne sont pas à 45°, il y aurait fatalement du pitch induit. A noter que le profil et la géométrie de l'aile sont fortement auto-stable, ça va résister fortement à l'action de la dérive.
@@Olivier-C Humm en théorie du moment que les deux dérivés tourne t d'autant la partie pitch s'annule ne laissant plus que la partie dérive.
Après pour le coup du profil auto stable j'avoue que je ne sais pas.... Humm dur dur. Mais j'ai déjà trouve une idée pour loger les servos j'ai vérifié avec tes stl et ça pourrait passer.
Great job!
Hi you mentioned "I term build up" what is this? Thanks
superbe avion hate de le tester!😁
Nice job 😊
Really beautiful thank you for sharing
Superbe, les pièces sont magnifiques , fait avec ta CR6SE ?
Hi bro, I dont remember if you mentioned in the video but I was wondering which firmware are you using with your flight controller?
Hi! INAV, latest version
hello Oliver can I fly this with 3s?
I'm printing this and am wondering where did you place your VTX? Under the hatch?
Antenna goes in the 10mm hole behind the hatch, then its held by this thing in 2 halves, in the folder /extras. The Vtx hangs free below the antenna
Thanks, I'll give it a try, but ran out of filament. Is using regular PLA okay?
@@Constancegrace001 PLA+ is also PLA, just it tends be of better quality and better specs, so I guess some good PLA should be ok ? But over all the dozen brands of PLA I have here, the esun PLA+ gives the better results for sure
Y aurait t'il une autre solution pour faire les charnières si notre imprimante n'accepte pas le TPU?
On doit pouvoir adapter des charnieres nylon classiques je pense, ca doit passer. C est quoi le probleme avec le TPU ? Car ca s imprime aux meme temperatures que le PLA+. le moteur qui n arrive pas a pousser le fil plus mou ?
Oui j'ai une vielle prusa, et le fil se plie juste après l'entraînement je guidage n'est pas suffisant
Super boulot 👍, quelle colle as tu utilisé ?
Merci! Cyano : www.amazon.fr/gp/product/B09SP2FFW8/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
@@Olivier-C merci je essayais de le faire et je vous ferais un retour, petite question pourquoi ne pas avoir mis de clé d'aile dans la conception ?
@@raphabaz4731 je ne suis pas sur de comprendre la question il y a bien 2 clefs d ailes
Sir thanks for that great video. Please teach me how to build this? How can I learn? Please
Is ther Fit an 4S2P 21700 Pack? Or just 4S1P? Or 18650 Cells or Large CNHL Orange 1800mAh Lipo
4S2P 21700 no, 4S1P 21700 yes, 4S1P 18650 yes
@@Olivier-C tHX
Coooooooooooool. What is the size of FPV Camera?
merci, lovely job ;-)
Thanks for sharing ❤
Er are ugly spaces between the win Parts. Is this Warping of 3d print? Possible to build it without this? Or is this an Design failoure or is your Printer not the Best or not perfectly calibrated? Or is this the "poor" designet? So cool plane i plan to print my own plane next. I am interestet on craycle crow racer 750mm
how many walls should i have print for fuselage? i printed on default settings there are 2 walls
Most of the parts are 1 wall ! See the spreadsheet with all the details
@@Olivier-C oo thank you very much
NICE
Beau boulot 👏👏👏👏👏
Pourquoi ne pas utiliser les supports en imprimant? Ça évite d’être contrait aux angles de 45 degrés
le but c'est de ne pas avoir de supports justement
Did you print those parts in PLA or LW-PLA? thank you
This one 100% printed with esun PLA+
Thank you @@Olivier-C
Could it fit 4s 21700 or 4s 18650 battery?
yes, both will fit !
Comment tu as nommé l'avion ?
infill 0% right?
Correct, no infill, unless printing with PLA lightweight (foaming)
Is this all PLA?
All PLA+ minus the hinges in TPU
Wow Nice 👌🖖
Nice! 🙂
top ! 👍
that's hard to print
I think you should tape the Elevon hinge gaps. Air will bleed from lower surface to upper through that gap. Reducing response and causing some drag...Looks a promising build to me, no real vices so far...🤔😳😀🇬🇧🇬🇧🇬🇧
hi which cara are you using I have 4.13.0 and your profiles don't fit the error!
Nice design, I like it....🤔😳👍😏🇬🇧🇬🇧
Nice.good like from Ukrine