BMW DSC Light ABS Precharge Pump Code 88
ฝัง
- เผยแพร่เมื่อ 7 ก.ค. 2024
- MY NEW BUSINESS: bit.ly/2URZuod
NEW ABS MODULE: ebay.to/2xIisrK
REBUILD YOUR MODULE: ebay.to/2xIisrK
SCAN TOOL: amzn.to/2lb9iYL
Pocket scan tool: amzn.to/22Fn2M1
How to diagnose your BMW when the DSC (Dynamic Stability Control) light is stuck on. This E39 had the ABS fault code number 88.
ONLINE www.bimmerzeit.com
THE GRAM / bimmerzeit
FACEBOOK / bimmerzeit
TWITTER / bimmerzeit
Disclaimer:
Due to factors beyond the control of BIMMERZEIT, we cannot guarantee against improper use or unauthorized modifications of this information. BIMMERZEIT assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BIMMERZEIT recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BIMMERZEIT no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BIMMERZEIT. Video and Content is owned by BIMMERZEIT © 2015 - แนวปฏิบัติและการใช้ชีวิต
There are 2 additional things that you can do try and rid the code. FIRST is to take a RUBBER mallet and hit the pre-charge pump with medium force a few times. SECOND, find an open dirt road and get up to about 50mph and SLAM on the brakes...do this about 5 times. Sometimes the components in the pump can get stuck and doing this method can free it up. This 2 step method was recommended by one of, if not the most knowledgeable and respected Import Mechanics in North/South Carolina.
3rd method is to drive to a quiet rock quarry and toss the car over the side .. ....😮
You’re a life saver!! I thought I was gonna hafta pay $1600 to replace the ABS module on my 2000 X5 and it really wasn’t even gonna be worth it since the car is so old. I already spent $190 getting the RR speed sensor replaced a few days ago and that didn’t clear my code 50 or the trifecta lights and my speedometer and odometer still don’t work. My mechanic told me that my issue was the ABS module not the speed sensor when I picked up my car. I wish I would have done more research before wasting my money on the speed sensor.
You should get a new mechanic. It’s not hard to install your old speed sensor. They ripped ya off
Bravo, nicely done!
very intuitive, thank you!!
Ok awesome thx. Plz let me know what scanner i can use myself to acess the abs system. I have a small plug in 1 with an app.
Gr8 video. I have an 02 325i. The ABS and DSC lights comes on and goes off. Comes on and after a week goes off, maybe a day or two comes on again. Brake pedel feels a little hard to stop. What do you think the problem is? Thanx.
Thanks for the video
Good video.
Was that real be a reference as in 5A for ABS short circuit so would that indicate that my ABS is bad and needs to be replaced cuz just as last night or yesterday all my lights lit up as well as my speedometer stopped working but today I got in the car now it works after I try to reset it
Who did you use to rebuild the module?
Thank u!!!
great video and thanks for naming the torque spit size
Nick D. Jones thanks Nick good luck with the repair
In case of replacing the abs how is the programming done
how to fix the dsc lights on 2003 bmw 525i e39? I replaced the modulator the abs lights and brake lights are gone, but I still have the dsc light on, how to fix it?
Good video
I only have DSC lights on when driving 30+ MPH -- its random but it will show up. Should I replace my DSC or maybe the wheel sensor is faulty? Yeah, Ill need a separate ODB scanner for this job.
Just a quick question !, is it ok to drive the car when the module is disconnected as it doesn't seem to affect the brakes when the plug is pulled out stops the limp mode which makes the car slow to pull away or am i totally wrong !
You didn't drive the car after you installed the fixed sensor, if it's really fixed, the lights won't light up past the 20/25mph mark, but if it's not really fixed then the lights will light up after you start to drive it, . . .can you please confirm this?
Super video !!! My 630i got a problem i cant get into the obd2 so it could be the abs module DSC.. ? Because they fixed the ecu that's fixt and reprogramed but STILL NO COMMUNICATION ! I think that's the problem ?
What scan tool are you using on the obdii port? Check if one of the pins bent by accident. Very easy to do, I’ve done it. Will result in no communication error on the scan tool.
Thank you fore you re ansering ! The obd is ok because it can get to other sercuits onley not the abs dsc and motormanagement system , i got it wrong it does not say no communication it say not ditactid 😉 .. but why can it not go in and look .. before it was fine and had no problem to go in 😔
I have a 2002 325 BMW DCS pressure sensor circuit open what does that mean need help
Hello, I have code 58 precharging pump. That is the same problem ?
That rebuilt website link doesn't work... Or is not complete.
Thanks for the video. I'm having the exact same issue. Are the lights still off? Also, where did you send your module to get repaired? Thanks
+Fix The Bimmer Thanks for getting back to me. Can you send me the link to the seller on ebay? I havn't been able to find a good seller who does this. I appreciate it
+Fix The Bimmer can you name the seller? i need this done
+Fix The Bimmer Having the same issue as well on my 740iL.. Naming the seller would be of great benefit to me as well
BIMMER ZEIT hey I have the same problem with my bmw. I was wondering how would I find someone to rebuild my module on ebay how did you do it can you please help me. thanks.
NEW ABS MODULE: amzn.to/1RdIUu5
REBUILD YOUR MODULE: ebay.to/2hGtS3f
It is possible to weld at home the pin inside and uni I did it
Where do i send it to rebuild it i have a 2001 bmw x5 3.0i
Can anyone tell me where do you send the abs modual in for repair for my 06 BMW 7 series
NEW ABS MODULE: amzn.to/1RdIUu5
REBUILD YOUR MODULE: ebay.to/2hGtS3f
I have the same issue with my E39, only DSC light is stuck on and had the code 88 pre charge pump failure. Do you know where is the pre charge pump located?
Leon it's located below the intake on the driver side of the car, close to the firewall
if I press the dsc button theres no response with the light. I feel as if when I drive my brakes tend to start slowing down the car when ever it wants. I know this because when I feel it ive pulled over and my brakes at smoking. I clean my wheels and the rear rims are always dirty with brake dust. if you can kindly advise me of this issue. thank you
When there is a fault the DSC light will stay on as you describe. I don't think your dusty wheels are related to the DSC issue, but can't diagnose over the internet. I would start with having that module rebuilt from an eBay vendor and having the shop your car is at inspect your brake components for wear.
Estou precisando de um módulo e bomba do abs bmw 530i ano 2001
I have the same problems abs brake dsc on ... so I get the use one from eBay $60 and one special obd reprogram $200 from eBay... and way to go keep bm run forever.....
i have a E39 that has the same problem i have the part for it do i still have to program it at the factory
please help
Hopefully someone can answer but that module for the abs was deleted willl that effect the drive?
Yes, you just wont have ABS and Traction Control
Please help, i had all three lights on I sent the module for rebuild and then when I got a back as soon as I installed it I started hearing ticking noise coming from the precharge pump and it won't go away even when I drove the car and everything so I have it disconnected now, and all lights are still on
I've read in several other forums that you have to bring your car to a dealer to get your rebuilt ABS module reprogrammed. The module is VIN specific and needs to be program to your car.
hey Kevin, did the shop who rebuilt your ABS unit tell you they found a fault in the unit? They should be able to tell you 1. they found a fault and 2. it was repairable. Not all module issues can be repaired with the rebuild service. Sometimes the car will require a brand new module. You would also need to verify that the precharge pump itself is functioning. Did you ever resolve your issue?
+BIMMER ZEIT yes they found a problem after I send it twice and finally they got fixed and it's all good now
hey guy I just purchaced a 2002 530i with a trouble code88 like the one you have on your video. you mentioned of places that will repair them for $100 can you give me a referral or where you had yours repaired. the local bmw shop said the prepump needs to be replaced. so I showed them your video. their interested in the out come. thank you for your help. Ralph at ralphs brake
Carlos, just search "BMW ABS module repair" on eBay and choose a vendor. Send your ABS out to them. It's very common, and worth a shot. Chances of actual pump being bad is slim.
Is this the same problem for the 2002 BMW x5?
The X5 has the same issues but you really need to start by scanning your car to find the ABS trouble codes. I'll have a new video soon about scanning with an inexpensive scan tool so you can avoid paying a shop a diagnostic scan fee
Where did u send it out too.
NEW ABS MODULE: amzn.to/1RdIUu5
REBUILD YOUR MODULE: ebay.to/2hGtS3f
I Made same on my e36 ! Posted video
My abs module stays on unless I disconnect it from the battery then it turns off
Hello
Do you have an address where I could send to repair 2 pumps?!
How long did it take to get back???
I believe it was about a week or so
Does anyone know if you could still drive the car without the module?
yes you can, but a plethora of side affects occur: odometer and speedo won't work (mileage won't be tracked), parking sensor stays on (if you have one), mpg as well as miles left on tank and gas levels are all erratic, shift points in transmission will occasionally be different/bad, obviously you won't have ABS and traction control working
.
where was the diagnosis? you guessed that it was more likely the abs module and got that repaired..guessing which of the two scenarios is more likely was not a diagnosis..
for some reason my 97 528 i will not shift past 2nd gear. I was under the impression that the abs module could be problem, is this a fact or not?
I haven't heard of this personally, but there are many variables that can cause your issue. You should start by scanning the car's OBDII port with a tool capable of getting transmission trouble codes and start there. This is the tool I use: th-cam.com/video/yxuWEJx1GiE/w-d-xo.html
@@BIMMERZEITT
Thankyou very much I will look into that.
@@berniesamuels9923 Bernie let me know what codes you find once you scan the car. In many cases the $60 tool will be less than the diagnostic fee charged by a repair shop. In a pinch you can stop by AutoZone or Advance Auto Parts stores, I believe they can scan the car for you for free to retrieve codes. I'm not sure if they can get transmission codes though, probably just generic engine codes.
@@BIMMERZEITT
I will do that, thanks again. I did lookup the scanner you mentioned so I may acquire one my self.
Can u still drive without it till it’s fixed
Hi, technically yes you can but I wouldn't recommend it. Your ABS will not be functional which is not too safe in the event you need to stop suddenly.
Oh ok thank you
@@BIMMERZEITT would it reduce the power of engine?
rabie jomaa no
I'm based outta California.
i need one of those pocket tools, where can i buy one
+christopher wallace Chris, I added a link in the description above. That's the same scan tool I have, has been going strong for many years.
how about a link or phone number for the shop that rebuilds..
NEW ABS MODULE: amzn.to/1RdIUu5
REBUILD YOUR MODULE: ebay.to/2hGtS3f
you could repaired it your self
just take out the cover and solder some disconnected points
soldering joints are extremely small inside those modules.. don't recommend doing it yourself if your not know exactly what you're up to
what kind of stupid fuck would place the abs module under atf reservoir,oil reservoir and coolant tank :@ its tight as fuck I had to remove everything and the fluids and the pipes still coudnt reach some bolts !! hate to work on x5
Doa Kayhan The same work for me last days 😝
I'm not impressed with how they've resealed your module.
They've apparently more than doubled their price since this video was made....
I saw that too. Still a good value. Prices going up like everything else!!
NEW ABS MODULE: ebay.to/2xIisrK
REBUILD YOUR MODULE: ebay.to/2xIisrK
SCAN TOOL: amzn.to/2lb9iYL
Can you tell us where to send the module to be fixed. I have the same problem on my 328 -2000.
The light goes on by it self.
Thank you so much.
Great video.
Hey everyone I've made a second video on this repair. You can view that here: th-cam.com/video/Sb2QWHz5cIc/w-d-xo.html
Here is the link for the eBay module rebuild: ebay.to/2xIisrK