I thought the install video of the aux buttons was excellent and very informative. The camera issues you had were really not a problem for me. Great job!!
With these buttons I can pretty much run what I want? I have a pursuit and was planning on using them as say a nitrous on/off switch, bottle heater switch and trans lock 😈. Since I have the plain Jane body I'd like to keep it Gramma fresh as possible.
Another great install video, as always, you do an excellent job with all your video's brother, it viewed perfectly for me, very clear and in focus. What a great mod for $60.00 and 30 mins of your time, I think anyway!! I especially like the fact that I can map a Light Show into 1 of the buttons, as I am a Paramedic and through the summer months I do "ON-CALL" shifts and do have to use my own car, so I have set up my own Light Show that looks awesome, blending my Scat Packs Light Show with the Whelen Behind the Grill LED Light, a Whelen LED Dash Light and a Whelen LED Visor Light on the passenger side, the whole car is ALL LIT UP now, but of course, there are still idiots driving blind and DO NOT see me coming up behind them, even with ALL those friggin' lights flashing...lol...But my point is that it'll be so much quicker and easier for me just to hit a single button on the steering wheel, rather than the original method of lighting up the car. Thank you for the install video and the link to Steve White as well. I will definitely order one of these Aux Button Switches on Monday from them. On a side note, your Scat Pack is really nice, with all the extra goodies you've done to it. I haven't done much to my Scat Pack at all other than a couple of things. The 1st thing I did was a Mid-Muffler Delete, the best $60 I've spent for 2 Stainless Steel pipes and at that time I also added Black Polished 45* degree Quad Rectangle Tail Pipes that are even with the rear bumper, they look really nice and the overall width of the tailpipe is 8 1/4" whereas the stock tails are 8 3/8" so I don't see that difference at all and the angle of the Quads match the angle of the bumper, which was a concern for me. I wanted the pipes to match the angle of the rear bumper and NOT just to be 90* degree squared off tail pipes, so I'm happy with them and it's been 2 years now and the Black Polished metal still looks new. Of course I store the car through the winter months, which I'm sure helps in keeping them looking nice as well. I did the install of a Hurst Short Throw Shifter mated to a Carbon Fiber Pistol Grip from Hurst as well, and a 180* T-Stat, a Black Hex Filter from R2C Performance replacing that Blue Mopar filter they used in my SHAKER Package, I also did a Full Lighting Replacement including the Foglights with the Flicker Modules and I went with the 510 Lumen Foglight Bulbs and all the other interior lights I decided on Cool White from Diode Dynamics. Obviously, I have a TAZER as well with everything activated and I drive it 99% of the time in TRACK Mode because the car sounds so good with the Active Exhaust always open!! Lol...I also replaced the Black START button with a RED start button, that was a PITA but it looks much better to me. I also had a All Round 25% Window Tint done, which looks very nice with the Maximum Steel paint and last year I had a Mopar Challenger "C" Stripe added to the side of the car as well and it looks amazing. The Black Matte matches perfectly with the Bumble Bee Trunk Stripe that came with the car. Last week I ordered an E&G Classic Rear Window Louver, so it should be here this week. I'm looking forward to adding it to the Scat Pack, so hopefully I'll have it by the weekend and I'll do the install next Sat, weather permitting. I'm now looking at new tires and I'm going with 275/40/20's on all 4 corners but I was considering 245/45's on the front and 275/40's on the rear, for a staggered look, but I'm not sure it would make much of a visual difference, since I've not seen that combo in person and I can't see anything different on the few I've seen in pictures, so I'll just go with all 4 tires being the 275/40/20's instead, then I can rotate all 4 rather than just the 2 going from left to right. I'm looking at either NITTO NT555 G2 tires or the BFGoodrich G-Force Sport Comp2 tires as replacements. I have those same BFG tires on my 2014 Chrysler 300 SRT and they are nice tires, I like them a lot and I have all 4 in 275/40/20 as well. The SRT is my winter car but I change out the Black Vapor Wheels and BFG tires for Cooper AS tires on the front and Cooper Snow Tires on the rear, with Black Steelies from the Charger Police Package to get me through all the winter shit weather. But, I've noticed that you are using Atturo Tires, so I am going to go watch that video next and I'll see what you have to say about them, so maybe I'll change my mind on the Nitto NT555 G2 & BFG G-Force Sport Comp2 rubber?? You never know...lol...Thanks again for the great vid!! Stay Safe!!
Regarding the emergency setup, I know zAutomotive is working on a breakout box with relays to control Emergency lights with the light show settings. Not sure where they are with this, but you may want to reach out and offer yourself up for a Beta. Interior lights in white are one of the best mods I've done. I used these 18 LED pontoon bulbs from amazon and they have been holding strong for over a year now. My fogs I went with the Diode Dynamics XML2 1420 lumens in 5000K again another awesome upgrade so my front lights all match. I wanted to do the red push to start, just haven't found the time to schedule it in yet. ! agree go with the 275/40/20 all around so you can rotate them ;) visually I didn't notice an appearance difference when I ran the stock 245/45/20s with the 275/40/20 in the rear. You can check my Instagram for photos of the car over the last year. I put 275s on all for corners last month. I don't drive the car in the snow so I can't speak for the Atturo snow performance, but in the rain they are excellent and grip better than stock on the dry pavement.
What kind of camera did you purchase for your Challenger scat pack? I’d like to perform the same modification to our 2021 Challenger R/T scat pack widebody shaker. Is there anyway to add a Camera application to the infotainment in order to switch back-and-forth between The front and rear camera? In the 2020 Durango RT there is a camera button where you turn on The ventilated seats or heated seats. You can actually even activate the camera while driving in the Durango R/T or Jeep Grand Cherokee Limited.
I added a camera to my 2015 and was able to switch by double tapping the mute button. The 2021’s have a different radio setup. I recommend reaching out to zAutomotive to determine if the same functionality exists with the new uConnect.
Awesome videos! Updated my tazer from 2.2.3 to 2.3.2 (to return to stock) and then to 2.4.3 to marry for one touch and to map sport button on my 16 charger scat. All tazer functions work great but no go on the remap of the sport button. any ideas?
Thanks for the reply. I have done just that but they really did not have any new ideas for me. I fixed the problem by removing the obd2 splitter. I enjoy the work you put into the production of your videos. It shows in the quality of videos you release.
Thank you, by the way I’ve seen instances where splitters cause some issues. Good call on removing it. If you need another port you may want to consider getting the double bypass and move your Tazer to the trunk. I did a video on this a few weeks back th-cam.com/video/1cESLOCkgbY/w-d-xo.html
Can you add front camera without Tazar? I was thinking about installing splitter which of course I wouldn't want to scrape so would like to have front camera hooked into 8.4 Uconnect
Not that I know of... You would need something like the TaZer to to unlock the additional inputs, allow you to switch to them and also the A/V kit wiring to insert into your radio wiring harness so you can plug in an input source. Check out this video on the zautomotive AV wiring. th-cam.com/video/zFd_asz39C0/w-d-xo.html.
its to my understanding you can create your own light show along with the ones that are preinstalled. I would really like to see a video on how to create one and what options there is when making one.
Where / how did you mount your front camera? Could you give some details and pics please? I am ready to install mine but would like to see what you decided to do.
You don't need the steering wheel buttons, but you do need the latest firmware (Late December 2016) that added the ability to remap the sport button. Info on that is here > th-cam.com/video/GUZcS1XJXnw/w-d-xo.html
I've got a 2016 Challenger and the Sport mode is disabled when I enable SRT mode. So just to get this straight, with the engine on, hold the left arrow and press the Sport button on the console while in the audio screen right? Do you need to let the car cycle again? I've been trying to figure out how to get this to work and it's driving me nuts. I like the SRT Mode but I cannot drive without Sport.
That might work fine, use the ACC On/Off button as stock with no remap, and then the double function on the distance buttons, so the only conflict would be with ACC On, something you could easily work around.
Hello @workplaydrive I have tazer v 2.4.4i and cannot remap my aux buttons any idea? Any help? tia. P.S. I contacted zautomotive and got nowhere with them
I'm usually online Friday nights, hitting 50 levels of horde with the fam before bed. I gotta separate my kids accounts from my mine then I'll post my xbox handle. "the internet can be a cruel place..." we always have an open slot so one extra would be nice
So question on the button remapping general firmware updates, when updated firmware versions come out, it's been suggested that you need to change all the settings back to stock configuration before loading the next version firmware....does this include the mapped buttons?. I have 2016 Charger SP and like to know if I change the setup to SRT and remap the sport button and newer firmware comes out, I assume I need to revert back to stock before loading....if I don't, I'm just not sure how this will now effect the mapped buttons?
From Joe Z: "No need to change anything before doing an update. It'll remember your settings in most cases. (only when I make major changes and change memory mapping then it forgets your settings, but I haven't done that in a while)
Just got my Auto 8spd Scatpack Chally, Tazer is on the way! Just curious, have you tried mapping any SRT drive modes to your aux buttons? I think I'd want to put Eco Mode on one of them. (And Yes, I've ordered the AUX button control module as well.)
Congrats on the new Scat Pack! It's possible to map the custom drive mode, don't think eco mode is possible, however the TaZer is updated often and Joe is active in the Mopar communities... Good luck with the install it's fairly simple once you get past the airbag release.
Yup, I replace the map lights with red LEDs every time I go to the drag strip. this way I can have some light in the car without being blinded. Normal daily driving I have these ridiculous 15 LED ultra white bulbs.
Thank you, I'm still working out the best spot to install the camera, I happen to be testing spots, and found near the top cent of the lower grill is the best to cover the chin spoiler. Once I figure out how to inconspicuously mount it I'll put up a video. ▽ Front camera using the AV kit installed in this video th-cam.com/video/zFd_asz39C0/w-d-xo.html Get the AV Kit Here: www.zautotech.com/avcables.html Cameras: amzn.to/2gK1hf3
any chance you show the wifi mirroring of your phone on the uconnect? Tazers site said it had that ability and thatd be the man reason id buy this besides the front camera
I know Joe Z (TaZer Creator) uses a Wifi Morror box and a micca speck g2 to Play movies on the screen. So it does work, Due to the cost of the WiFi mirror box I've been holding off until I can borrow one from a friend. If I find one though I will put up a video.
I'm installing some Kindig-it Design Exhaust Cutouts and was looking for options for the button, this looks like a better idea and got me wondering if its possible to use one of the AUX switches to control the cutouts?
I don't think this would be possible without some intense programming, as they are not on/off switches they just send signal that is processed by the car. The Tazer is remapping these to functions that exist in the car or the Tazer. I checked out the Kindig-it Design looks sweet, I have a set of NoWeeds diverters in transit, should be here next week I cannot wait for more loud. I do agree It would be awesome if the steering wheel buttons could control this
Scratch that, I just spoke with zautotech and they are making a canbus add on or the TaZer to allow on / off functionality from the AUX buttons. I'm waiting to hear back on a release date so maybe I can use them for my Diverters :)
I know. I think they are using a factory switch with adaptive cruise but they just change the button letters. My Hellcat doesn't have any buttons there also.
so I bought the buttons and I wanted to use them to control 3 things. (nitrous system, bottle heater, purge kit) how did you get the front camera programmed into the unit? is it hidden in the dodge hardware somewhere?
With the TaZer those 3 buttons are not mappable to functions outside the TaZer options currently available, you may need to do some modifications to get it done or Contact them to see if custom mapping is an option. You are definitely not the first person that wanted to do this. The front cam is not in it's final home yet, I'm still trying to find the perfect spot for it without having to cut anything or have some silly project box in plain sight. Waiting for warmer weather to tear down the front end.
hello quick question... the camera is now available. is the quality good? I'm thinking of purchasing soon. everything else is in place taser, extra button and av cables... if you know about a different camera thats better let me know please. thanks and love all the videos 2016 challenger scat (love my boo)
quality is limited by the 8.4 uConnect screen. This cam is good, glad it's available again. We have a good discussion on this going in the "Challenger Scat Pack 6.4 Owners Group" here is a direct link to the post. Where we discuss wiring it up and other camera options. It is a private group so you do need to join first the only requirement is owning a Scat Pack facebook.com/groups/1521659391385083/permalink/1832881386929547/?comment_id=1835911113293241&reply_comment_id=1835966116621074¬if_t=group_comment_mention¬if_id=1489363696401124
From Joe Z "If you have adaptive cruise, you can use the remap function... BUT, it's sort of a double-map... so don't map the ACC on/off button as it'll do both the tazer function and turn ACC on and off, so that button can't be used. But the nearer and closer buttons can be mapped, and I coded the tazer such that they should only do the tazer function while ACC is off, and when ACC is on, the tazer ignores those buttons."
Work Play Drive Awesome thanks for getting the answer from Joe, this Tazer is getting better every day. I love having all these options how I get to customize the car. Thanks for you videos I really lkie them and i might be installing a front camera soon.
Work Play Drive if i don’t have ACC but i buy the ACC button assembly can i remap all three buttons since i don’t really have ACC just the buttons? Cuz you stated you cant remap on & off button but i wouldn’t have ACC for-real to turn anything off or on just the button function?
BEWARE: If you don't have the aux buttons you do, then what ever function was there before (cruise mode etc) will activate as well as what ever you programmed. I've talked with Joe about and they don't seem to care it does this.
Do you have a fix on remapping sport mode button (that doesn't work in Tazer SRT mode) or any other solution for 2015 challengers? I only have SRT disabled because I can't use sport mode :( it's frustrating. Tazer says 2016-17 can only remap :(
You can remap the sport button on a 2015 to a custom drive mode that includes all sport options. My 2015 Scat Pack sport button works with SRT enabled. What model do you have?
I have 2015 RT. The remapping isn't the biggest issue. I believe the big problem I can't get around is that sport and track only work if you have a red key and even in custom mode you can change everything except for engine where it asks for a red key to switch (it thinks it's a hellcat) to sport or track (as soon as I click on sport on custom it asks for 700+ hp red key). There may be no fix :(
I've got some bad news on that one. These are known issues that may not be fixed because this area offers no functionality in the 5.7 The below is from the FAQ www.zautotech.com/docs/Tazer%20FAQs.pdf If you have a 2015/2016 Charger 3.6 or 5.7, setting SRT will result in an airbag error. Nothing unlocked in SRT mode works on the 3.6/5.7, so no reason to enable SRT on these cars. You can still get all the EVIC performance pages and add sport mode if you don’t already have it. - If you have a 2015/2016 Challenger 3.6 or 5.7, enabling SRT will not result in an airbag error, but the uconnect will think you have a Hellcat and are using the black key, so sport, track, and valet modes will be inaccessible.
Yes. I am aware. I am confused on how it would think the 5.7 is a hellcat but wouldn't think the 6.4 is a hellcat to give the same error asking for red key.
The button remapping feature is only available in the December 2016 and after firmware once installed did you try the steps at 6:09 to map the sport mode to a custom drive mode?
I did and got the custom mode to work on the sport button. Is there any way to remap the backup camera to the traction control button or any other unused button? -Thanks for the quick response
The other buttons in that panel are not mappable only Sport. You can double tap mute to switch to the backup cam. Note at about 8mph the cam will shut off
Ok, cool. Thanks!! (Need help with another issue) I had a set of LED lights from my 2016 challenger RT plus (worked fine) Then i put the same set on my new 2017 challenger scat pack and for some reason they blink but wont stay on. Anyway to fix this?
yes, but in the next few weeks zAutomotive will be releasing a new product that eliminates the need to take apart your steering wheel. They found if you remove the blank plate over the buttons there are functional contacts so they developed buttons that snap in.
from what I've seen you leave the wheel intact and just pop of the blank plate then snap in the 3 new functional buttons they sell. Check out my post here facebook.com/workplaydrive392/photos/a.1108848085820702.1073741831.1083744008331110/1563993140306192/?type=3&theater
Work Play Drive I wanna buy the one you got will it work on 2017 scat pack charger? & the place you got it from in link they dont have it no more so i gotta get it from EBAY.
Thank you for your awesome videos. You helped me a lot! I mapped one button to my rear cam, but somehow it’s not showing up. Do you know why? Everything else works great. Again thank you so much!!!!!
I popped out the factory bulbs and installed LED (only in the map lights) the lights over the headrests are still stock as they are too much of a pain to change. I believe I have a video on this I can upload.
Lightshow while driving is not legal in most areas unless approved use. You can contact support at www.zautotech.com/ and they will reply with the process.
I'ts nice and small but, I'm still trying to find the perfect mounting place for it in the lower grill. I want to see the chin spoiler, still have a cool low view of the road, but have it be as invisible as possible.
I thought the install video of the aux buttons was excellent and very informative. The camera issues you had were really not a problem for me. Great job!!
Awesome, thank you!
With these buttons I can pretty much run what I want? I have a pursuit and was planning on using them as say a nitrous on/off switch, bottle heater switch and trans lock 😈. Since I have the plain Jane body I'd like to keep it Gramma fresh as possible.
My TaZer came in the mail today... can't wait use it. Thanks for the great videos.
No problem enjoy, take it slow and write down all your changes, so you can always go back to stock.
Another great install video, as always, you do an excellent job with all your video's brother, it viewed perfectly for me, very clear and in focus. What a great mod for $60.00 and 30 mins of your time, I think anyway!! I especially like the fact that I can map a Light Show into 1 of the buttons, as I am a Paramedic and through the summer months I do "ON-CALL" shifts and do have to use my own car, so I have set up my own Light Show that looks awesome, blending my Scat Packs Light Show with the Whelen Behind the Grill LED Light, a Whelen LED Dash Light and a Whelen LED Visor Light on the passenger side, the whole car is ALL LIT UP now, but of course, there are still idiots driving blind and DO NOT see me coming up behind them, even with ALL those friggin' lights flashing...lol...But my point is that it'll be so much quicker and easier for me just to hit a single button on the steering wheel, rather than the original method of lighting up the car. Thank you for the install video and the link to Steve White as well. I will definitely order one of these Aux Button Switches on Monday from them. On a side note, your Scat Pack is really nice, with all the extra goodies you've done to it. I haven't done much to my Scat Pack at all other than a couple of things. The 1st thing I did was a Mid-Muffler Delete, the best $60 I've spent for 2 Stainless Steel pipes and at that time I also added Black Polished 45* degree Quad Rectangle Tail Pipes that are even with the rear bumper, they look really nice and the overall width of the tailpipe is 8 1/4" whereas the stock tails are 8 3/8" so I don't see that difference at all and the angle of the Quads match the angle of the bumper, which was a concern for me. I wanted the pipes to match the angle of the rear bumper and NOT just to be 90* degree squared off tail pipes, so I'm happy with them and it's been 2 years now and the Black Polished metal still looks new. Of course I store the car through the winter months, which I'm sure helps in keeping them looking nice as well. I did the install of a Hurst Short Throw Shifter mated to a Carbon Fiber Pistol Grip from Hurst as well, and a 180* T-Stat, a Black Hex Filter from R2C Performance replacing that Blue Mopar filter they used in my SHAKER Package, I also did a Full Lighting Replacement including the Foglights with the Flicker Modules and I went with the 510 Lumen Foglight Bulbs and all the other interior lights I decided on Cool White from Diode Dynamics. Obviously, I have a TAZER as well with everything activated and I drive it 99% of the time in TRACK Mode because the car sounds so good with the Active Exhaust always open!! Lol...I also replaced the Black START button with a RED start button, that was a PITA but it looks much better to me. I also had a All Round 25% Window Tint done, which looks very nice with the Maximum Steel paint and last year I had a Mopar Challenger "C" Stripe added to the side of the car as well and it looks amazing. The Black Matte matches perfectly with the Bumble Bee Trunk Stripe that came with the car. Last week I ordered an E&G Classic Rear Window Louver, so it should be here this week. I'm looking forward to adding it to the Scat Pack, so hopefully I'll have it by the weekend and I'll do the install next Sat, weather permitting. I'm now looking at new tires and I'm going with 275/40/20's on all 4 corners but I was considering 245/45's on the front and 275/40's on the rear, for a staggered look, but I'm not sure it would make much of a visual difference, since I've not seen that combo in person and I can't see anything different on the few I've seen in pictures, so I'll just go with all 4 tires being the 275/40/20's instead, then I can rotate all 4 rather than just the 2 going from left to right. I'm looking at either NITTO NT555 G2 tires or the BFGoodrich G-Force Sport Comp2 tires as replacements. I have those same BFG tires on my 2014 Chrysler 300 SRT and they are nice tires, I like them a lot and I have all 4 in 275/40/20 as well. The SRT is my winter car but I change out the Black Vapor Wheels and BFG tires for Cooper AS tires on the front and Cooper Snow Tires on the rear, with Black Steelies from the Charger Police Package to get me through all the winter shit weather. But, I've noticed that you are using Atturo Tires, so I am going to go watch that video next and I'll see what you have to say about them, so maybe I'll change my mind on the Nitto NT555 G2 & BFG G-Force Sport Comp2 rubber?? You never know...lol...Thanks again for the great vid!! Stay Safe!!
Regarding the emergency setup, I know zAutomotive is working on a breakout box with relays to control Emergency lights with the light show settings. Not sure where they are with this, but you may want to reach out and offer yourself up for a Beta.
Interior lights in white are one of the best mods I've done. I used these 18 LED pontoon bulbs from amazon and they have been holding strong for over a year now. My fogs I went with the Diode Dynamics XML2 1420 lumens in 5000K again another awesome upgrade so my front lights all match.
I wanted to do the red push to start, just haven't found the time to schedule it in yet.
! agree go with the 275/40/20 all around so you can rotate them ;) visually I didn't notice an appearance difference when I ran the stock 245/45/20s with the 275/40/20 in the rear. You can check my Instagram for photos of the car over the last year. I put 275s on all for corners last month. I don't drive the car in the snow so I can't speak for the Atturo snow performance, but in the rain they are excellent and grip better than stock on the dry pavement.
That thing is fancy bro! 🙌🏼
You have a TaZer yet? You seem like the kind of guy who needs a Light show and good line lock for those churros of yours :)
I know this is old. But Mopar does t show these switches for the challenger only the charger. Are they the same. Thank you.
What kind of camera did you purchase for your Challenger scat pack? I’d like to perform the same modification to our 2021 Challenger R/T scat pack widebody shaker. Is there anyway to add a Camera application to the infotainment in order to switch back-and-forth between The front and rear camera? In the 2020 Durango RT there is a camera button where you turn on The ventilated seats or heated seats. You can actually even activate the camera while driving in the Durango R/T or Jeep Grand Cherokee Limited.
I added a camera to my 2015 and was able to switch by double tapping the mute button. The 2021’s have a different radio setup. I recommend reaching out to zAutomotive to determine if the same functionality exists with the new uConnect.
I only have the 7 inch radio so I need the sport button to work as I have no way to turn it on. Sadly I can't not get the button to remap.
Thanks for the lack of response on the button remapping issue 1⭐
Awesome videos! Updated my tazer from 2.2.3 to 2.3.2 (to return to stock) and then to 2.4.3 to marry for one touch and to map sport button on my 16 charger scat. All tazer functions work great but no go on the remap of the sport button. any ideas?
You need to contact zautomotive for support on that one.
Thanks for the reply. I have done just that but they really did not have any new ideas for me. I fixed the problem by removing the obd2 splitter. I enjoy the work you put into the production of your videos. It shows in the quality of videos you release.
Thank you, by the way I’ve seen instances where splitters cause some issues. Good call on removing it. If you need another port you may want to consider getting the double bypass and move your Tazer to the trunk. I did a video on this a few weeks back th-cam.com/video/1cESLOCkgbY/w-d-xo.html
Can you add front camera without Tazar? I was thinking about installing splitter which of course I wouldn't want to scrape so would like to have front camera hooked into 8.4 Uconnect
Not that I know of... You would need something like the TaZer to to unlock the additional inputs, allow you to switch to them and also the A/V kit wiring to insert into your radio wiring harness so you can plug in an input source. Check out this video on the zautomotive AV wiring. th-cam.com/video/zFd_asz39C0/w-d-xo.html.
its to my understanding you can create your own light show along with the ones that are preinstalled.
I would really like to see a video on how to create one and what options there is when making one.
+Stephen Ferguson it's in the works just too cold outside to program the light shows.
^^^^THIS^^^^
Can you post the aux button install video? There's no other video's out.
I just uploaded it last night Should be up later today!
Do the AUX buttons only work while the tazer is in the OB2 port? Or can the things you mapped be used while it’s off and away from the vehicle?
The button remap is a "Live feature", these require the TaZer to be connected for them to work.
Where / how did you mount your front camera? Could you give some details and pics please? I am ready to install mine but would like to see what you decided to do.
Never finished mounting the camera and running the wiring. I was working out where to put it when I got sidetracked on other projects.
I can't get my sport button to work not srt mode is set. I know you addressed this but is there a way to get it working without getting these buttons?
You don't need the steering wheel buttons, but you do need the latest firmware (Late December 2016) that added the ability to remap the sport button. Info on that is here > th-cam.com/video/GUZcS1XJXnw/w-d-xo.html
I've got a 2016 Challenger and the Sport mode is disabled when I enable SRT mode. So just to get this straight, with the engine on, hold the left arrow and press the Sport button on the console while in the audio screen right?
Do you need to let the car cycle again? I've been trying to figure out how to get this to work and it's driving me nuts. I like the SRT Mode but I cannot drive without Sport.
You can’t remap sport, but you could map it to a custom drive mode. Try mapping it to SRT track mode
Thanks man! Changed the drive mode and worked like a charm.
With the fan controls enabled, have you changed to a 180 T-stat? These cars seem to run hot from the factory.
Nope no tStat changes yet, I'm going to save that for when I do the major engine work in the future. Need more horsepower once she's paid off.
Got you, GREAT vids, thank you!
Thank you!
I am glad I have a 2014, I would be max out my credit card on all the goodies
Do you have a link for the front camera? How about a install video? Sorry if I missed them somewhere.
The link to the camera is on the description, I never installed it fully because I couldn’t find a good place to mount it that was hidden.
Silly question, what happens if you already have ACC and the stock tech pack buttons?
You can remap them as well however they will do their original function AND the Tazer mapped function.
That might work fine, use the ACC On/Off button as stock with no remap, and then the double function on the distance buttons, so the only conflict would be with ACC On, something you could easily work around.
do you need the tazer plugged in to control the fans or can you start it without the device
Yes the TaZer needs to be connected to run the fans.
Work Play Drive are their other obd ports that can be plugged into, i wanna keep my diablo in
With tazer, can u reassign buttons on the steeringnwheel to something else? Thanks.
Yes, but you can only map them to features available with the tazer and any items they add in the future.
Work Play Drive can you remap prexisting buttons?
Yes but it will perform both the OEM function and the mapped function simultaneously
Hello @workplaydrive I have tazer v 2.4.4i and cannot remap my aux buttons any idea? Any help? tia. P.S. I contacted zautomotive and got nowhere with them
gaming is always cool to watch. if you ever play titanfall 2 or wanna play on gow 4 hit me up
I'm usually online Friday nights, hitting 50 levels of horde with the fam before bed. I gotta separate my kids accounts from my mine then I'll post my xbox handle. "the internet can be a cruel place..." we always have an open slot so one extra would be nice
Work Play Drive do you still play ? Gears , pubg , cod ?
I really haven’t played Xbox since my dad passed in December. That was kind of our time to hang out play and chat so it’s a little tough going back.
So question on the button remapping general firmware updates, when updated firmware versions come out, it's been suggested that you need to change all the settings back to stock configuration before loading the next version firmware....does this include the mapped buttons?. I have 2016 Charger SP and like to know if I change the setup to SRT and remap the sport button and newer firmware comes out, I assume I need to revert back to stock before loading....if I don't, I'm just not sure how this will now effect the mapped buttons?
From Joe Z: "No need to change anything before doing an update. It'll remember your settings in most cases. (only when I make major changes and change memory mapping then it forgets your settings, but I haven't done that in a while)
Do the aux buttons actually light up like the rest of the buttons on?
Just got my Auto 8spd Scatpack Chally, Tazer is on the way! Just curious, have you tried mapping any SRT drive modes to your aux buttons? I think I'd want to put Eco Mode on one of them. (And Yes, I've ordered the AUX button control module as well.)
Congrats on the new Scat Pack! It's possible to map the custom drive mode, don't think eco mode is possible, however the TaZer is updated often and Joe is active in the Mopar communities... Good luck with the install it's fairly simple once you get past the airbag release.
Eric Richmond did you order the AUX button control module already?
Awesome. Where and how did you mount the rear camera?
Thank you, the rear camera was from the factory it's mounted in the spoiler.
Do you have led light inside your car?
Yup, I replace the map lights with red LEDs every time I go to the drag strip. this way I can have some light in the car without being blinded. Normal daily driving I have these ridiculous 15 LED ultra white bulbs.
That is awesome work. What is the part number for the front camera and how/where did you mount it? Thanks in advance!
Thank you, I'm still working out the best spot to install the camera, I happen to be testing spots, and found near the top cent of the lower grill is the best to cover the chin spoiler. Once I figure out how to inconspicuously mount it I'll put up a video.
▽ Front camera using the AV kit installed in this video th-cam.com/video/zFd_asz39C0/w-d-xo.html
Get the AV Kit Here: www.zautotech.com/avcables.html
Cameras: amzn.to/2gK1hf3
will a steering wheel out of a 2015 charger fit in a 2014 Charger
any chance you show the wifi mirroring of your phone on the uconnect? Tazers site said it had that ability and thatd be the man reason id buy this besides the front camera
I know Joe Z (TaZer Creator) uses a Wifi Morror box and a micca speck g2 to Play movies on the screen. So it does work, Due to the cost of the WiFi mirror box I've been holding off until I can borrow one from a friend. If I find one though I will put up a video.
awesome, hope you get one!
I'm installing some Kindig-it Design Exhaust Cutouts and was looking for options for the button, this looks like a better idea and got me wondering if its possible to use one of the AUX switches to control the cutouts?
I don't think this would be possible without some intense programming, as they are not on/off switches they just send signal that is processed by the car. The Tazer is remapping these to functions that exist in the car or the Tazer.
I checked out the Kindig-it Design looks sweet, I have a set of NoWeeds diverters in transit, should be here next week I cannot wait for more loud. I do agree It would be awesome if the steering wheel buttons could control this
Scratch that, I just spoke with zautotech and they are making a canbus add on or the TaZer to allow on / off functionality from the AUX buttons. I'm waiting to hear back on a release date so maybe I can use them for my Diverters :)
Thanks for the input, hopefully the function will allow on / off functionality for AUX buttons. Let me know what you find out on the released date.
Theres my crapy Garage door...Look at that. ROFL Keep up the great vids.
Thanks man, hopefully some day I'll do an upgrading the garage video :)
So is this just a factory adaptive cruise switch but the buttons have been changed to aux lettering?
This is more for the cars with blanks there. My 15 Scat Pack just had 3 blanks there., so swapping this out made them active buttons.
I know. I think they are using a factory switch with adaptive cruise but they just change the button letters. My Hellcat doesn't have any buttons there also.
so I bought the buttons and I wanted to use them to control 3 things. (nitrous system, bottle heater, purge kit) how did you get the front camera programmed into the unit? is it hidden in the dodge hardware somewhere?
With the TaZer those 3 buttons are not mappable to functions outside the TaZer options currently available, you may need to do some modifications to get it done or Contact them to see if custom mapping is an option. You are definitely not the first person that wanted to do this.
The front cam is not in it's final home yet, I'm still trying to find the perfect spot for it without having to cut anything or have some silly project box in plain sight. Waiting for warmer weather to tear down the front end.
David Mathis did you order the AUX button control module already?
Why my nav in motion & back camera doesn’t work in my 15 Challenger R/T ?
Thanks
Please reach out to zAutomotive support, they can help
hello quick question... the camera is now available. is the quality good? I'm thinking of purchasing soon. everything else is in place taser, extra button and av cables... if you know about a different camera thats better let me know please. thanks and love all the videos 2016 challenger scat (love my boo)
quality is limited by the 8.4 uConnect screen. This cam is good, glad it's available again.
We have a good discussion on this going in the "Challenger Scat Pack 6.4 Owners Group" here is a direct link to the post. Where we discuss wiring it up and other camera options. It is a private group so you do need to join first the only requirement is owning a Scat Pack
facebook.com/groups/1521659391385083/permalink/1832881386929547/?comment_id=1835911113293241&reply_comment_id=1835966116621074¬if_t=group_comment_mention¬if_id=1489363696401124
Work Play Drive thank you... I requested but it won't accept my answer for what year and color my challenger is😢
I got in thanks.
Sorry for the troubles I got in a while ago, didn't realize you had to take a test for membership lol...
Work Play Drive lol no trouble at all I passed 😜
Can remap sport mode on the auxiliary steering wheel buttons
no but you can map a custom drive mode, built like sport mode ;)
Work Play Drive so technically you can remap a “track mode” to one of the aux buttons? Thanks for posting and being informative, good stuuf👍🏻
Thank you 🙏
Can the ACC buttons be remapped if they are functional. I have an auto 8 speed charger
From Joe Z
"If you have adaptive cruise, you can use the remap function... BUT, it's sort of a double-map... so don't map the ACC on/off button as it'll do both the tazer function and turn ACC on and off, so that button can't be used. But the nearer and closer buttons can be mapped, and I coded the tazer such that they should only do the tazer function while ACC is off, and when ACC is on, the tazer ignores those buttons."
Work Play Drive Awesome thanks for getting the answer from Joe, this Tazer is getting better every day. I love having all these options how I get to customize the car. Thanks for you videos I really lkie them and i might be installing a front camera soon.
Work Play Drive if i don’t have ACC but i buy the ACC button assembly can i remap all three buttons since i don’t really have ACC just the buttons? Cuz you stated you cant remap on & off button but i wouldn’t have ACC for-real to turn anything off or on just the button function?
BEWARE: If you don't have the aux buttons you do, then what ever function was there before (cruise mode etc) will activate as well as what ever you programmed. I've talked with Joe about and they don't seem to care it does this.
Do you have a fix on remapping sport mode button (that doesn't work in Tazer SRT mode) or any other solution for 2015 challengers? I only have SRT disabled because I can't use sport mode :( it's frustrating. Tazer says 2016-17 can only remap :(
You can remap the sport button on a 2015 to a custom drive mode that includes all sport options. My 2015 Scat Pack sport button works with SRT enabled. What model do you have?
I have 2015 RT. The remapping isn't the biggest issue. I believe the big problem I can't get around is that sport and track only work if you have a red key and even in custom mode you can change everything except for engine where it asks for a red key to switch (it thinks it's a hellcat) to sport or track (as soon as I click on sport on custom it asks for 700+ hp red key). There may be no fix :(
I've got some bad news on that one. These are known issues that may not be fixed because this area offers no functionality in the 5.7
The below is from the FAQ www.zautotech.com/docs/Tazer%20FAQs.pdf
If you have a 2015/2016 Charger 3.6 or 5.7, setting SRT will result in an airbag error. Nothing unlocked in SRT mode works on the 3.6/5.7, so no reason to enable SRT on these cars. You can still get all the EVIC performance pages and add sport mode if you don’t already have it.
- If you have a 2015/2016 Challenger 3.6 or 5.7, enabling SRT will not result in an airbag error, but the uconnect will think you have a Hellcat and are using the black key, so sport, track, and valet modes will be inaccessible.
Yes. I am aware. I am confused on how it would think the 5.7 is a hellcat but wouldn't think the 6.4 is a hellcat to give the same error asking for red key.
I have a 2017 Scat Pack and want to remap my sport mode. It currently doesnt NOT work. How can I do this?
-Any input is appreciated.
The button remapping feature is only available in the December 2016 and after firmware once installed did you try the steps at 6:09 to map the sport mode to a custom drive mode?
I did and got the custom mode to work on the sport button. Is there any way to remap the backup camera to the traction control button or any other unused button?
-Thanks for the quick response
The other buttons in that panel are not mappable only Sport. You can double tap mute to switch to the backup cam. Note at about 8mph the cam will shut off
Ok, cool. Thanks!! (Need help with another issue) I had a set of LED lights from my 2016 challenger RT plus (worked fine) Then i put the same set on my new 2017 challenger scat pack and for some reason they blink but wont stay on. Anyway to fix this?
are these LED interior lights or exterior (headlights, fogs)?
Nice video! Thanks!
Did you have to purchase a front facing camera?
Sorry was being impatient, saw the info on the camera!
Excellent.
Does the aux buttons for steering wheel work for 2017 scat pack?
yes, but in the next few weeks zAutomotive will be releasing a new product that eliminates the need to take apart your steering wheel. They found if you remove the blank plate over the buttons there are functional contacts so they developed buttons that snap in.
Work Play Drive so basically there buttons that will snap in place & can you still install the old one with aux buttons?
from what I've seen you leave the wheel intact and just pop of the blank plate then snap in the 3 new functional buttons they sell. Check out my post here facebook.com/workplaydrive392/photos/a.1108848085820702.1073741831.1083744008331110/1563993140306192/?type=3&theater
Work Play Drive but you can still purchase the one you got & install if i didnt want this updated one?
Work Play Drive I wanna buy the one you got will it work on 2017 scat pack charger? & the place you got it from in link they dont have it no more so i gotta get it from EBAY.
Thank you for your awesome videos. You helped me a lot! I mapped one button to my rear cam, but somehow it’s not showing up. Do you know why? Everything else works great. Again thank you so much!!!!!
cause u got an 2017
How do you have your interior lights red?
I popped out the factory bulbs and installed LED (only in the map lights) the lights over the headrests are still stock as they are too much of a pain to change. I believe I have a video on this I can upload.
i would greatly appreciate if you would post a video on this. looks so sick!
I'll get it done soon, I planned on going back to super bright for the winter, so I'll just record the swap
Work Play Drive You're the man! Thanks for the awesome content!
How can i keep lightshow on while I'm driving
Lightshow while driving is not legal in most areas unless approved use. You can contact support at www.zautotech.com/ and they will reply with the process.
I definitely want that front camera
I'ts nice and small but, I'm still trying to find the perfect mounting place for it in the lower grill. I want to see the chin spoiler, still have a cool low view of the road, but have it be as invisible as possible.
Dang that is awesome ! I love all the customization possibilities. I take it this is for MOPAR only at this point? sub'd
Yes, but I don't fault you for owning a Camaro :)
lol , thanks for that
Nice Video
Thank you!
Post it anyway
I just uploaded it last night Should be up later today!
post it
I just uploaded it last night Should be up later today!