Cheap free flight toy to RC airplane - Building and maiden flight video - chuck glider rc conversion

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น • 145

  • @pooljunki1
    @pooljunki1 4 ปีที่แล้ว +5

    Wow you have a lot of interesting stuff, this thing rips

  • @GroundControlRC
    @GroundControlRC 4 ปีที่แล้ว +5

    Very nice project Marko! Those converted Chuck Gliders are an absolute blast and nearly indestructible ;-) See you in the Air!

  • @AAAAAA-iw9wk
    @AAAAAA-iw9wk 4 ปีที่แล้ว +3

    What is the weight and flight time ?????
    And can you tell me a suggestion for how I can make motor mount??

  • @shogunemperor
    @shogunemperor 4 ปีที่แล้ว +9

    This is brilliant bruh!! Love that motor mount!!!!

  • @GrandadIsAnOldMan
    @GrandadIsAnOldMan 4 ปีที่แล้ว +2

    Great modification 😁👍

  • @FlyMIfYouGotM
    @FlyMIfYouGotM 2 ปีที่แล้ว +5

    Nice conversion! I have been curious as to why no one seems to have cut the rudder off and reconfigured the horizontal stab into a "V" tail and use taileron control for the elevator and aileron. Radio mixing aside, this would seem simpler, slightly lighter and less drag if it would work. I may need to try this just to see if it works.

  • @viktorlunge1280
    @viktorlunge1280 11 หลายเดือนก่อน +2

    Сейчас строю як 130 под 70 мм импелера. В планах еще построить мига- вот только файлы с сайта rconen не получается скачать просит разрешение на скачивание .

  • @ВалерийЯкушин-ъ3й
    @ВалерийЯкушин-ъ3й 4 ปีที่แล้ว +3

    Speed and aerobatics are top class.

  • @ВалерийЯкушин-ъ3й
    @ВалерийЯкушин-ъ3й 4 ปีที่แล้ว +2

    You're good. The model is made beautifully. You fly super.

  • @Spirit612
    @Spirit612 3 ปีที่แล้ว +2

    Nice work, but you left out the controller in your parts listing links. Also, I didn't see you check the CG on it - looks a little front heavy.

  • @quentinbush
    @quentinbush 7 หลายเดือนก่อน +1

    After the time it took to modify, I bet you enjoyed the challenge. Heck it goes like stink. Well done.

  • @flightdirection8122
    @flightdirection8122 4 ปีที่แล้ว +3

    Nice, I actually started with a sports cub s2 but then lost it in the wind and so now I’m looking at the citation longitude jet

  • @AAAAAA-iw9wk
    @AAAAAA-iw9wk 4 ปีที่แล้ว +2

    Can you share file which you used for cutting motor mount ???

  • @Владимир-ч5т1щ
    @Владимир-ч5т1щ 3 ปีที่แล้ว +2

    Расскажите пожалуйста, как Вы выпрямляли консоли крыла?

  • @zero00tolerance
    @zero00tolerance 4 ปีที่แล้ว +6

    Hello Marko this is great ! i have the same plane, will attempt to build it like yours but not close to your level. Love the fast build video however 1 suggestion is to slow down on the finished part, we would like to enjoy your beautiful work and see how you build it close up. New sub from me sir !

  • @RcAircraft
    @RcAircraft 4 ปีที่แล้ว +4

    Great motor-fication 😁

  • @caf1971
    @caf1971 6 หลายเดือนก่อน +1

    Can you share stl file which you used for cutting motor mount ? thx

  • @BenPortmanlewes
    @BenPortmanlewes ปีที่แล้ว +2

    Why add the control surfaces? , they're there.

  • @darrin_gunderson
    @darrin_gunderson 2 ปีที่แล้ว +1

    super clean build.

  • @rcawed3793
    @rcawed3793 3 ปีที่แล้ว +2

    really cool airplane

  • @balsamidis
    @balsamidis 4 หลายเดือนก่อน +1

    can you tell us where to find the cg ?

  • @jgme627
    @jgme627 3 ปีที่แล้ว +3

    👍👍👍😁 Awesome bro.

  • @musharrafhanif
    @musharrafhanif 3 ปีที่แล้ว +3

    A very nice conversion. Can you please tell me the thickness of the balsa wood used for the ailerons and elevator? Also, what material is the motor mount made off (type and thickness)?

    • @markoroolaid
      @markoroolaid  3 ปีที่แล้ว +1

      Hi, ailerons and elevator- 2mm balsa, motor mount 1mm plywood

  • @ЭкспертВСЕХЭКСПЕРТОВ
    @ЭкспертВСЕХЭКСПЕРТОВ 3 ปีที่แล้ว +2

    Лучшее что я вилел. Браво! Буду повторять.

    • @markoroolaid
      @markoroolaid  3 ปีที่แล้ว +1

      Большое спасибо

  • @THROTTLEPOWER
    @THROTTLEPOWER 4 ปีที่แล้ว +2

    Very cool, thanks for sharing........👍👍👍

  • @gajahmada-rd9vj
    @gajahmada-rd9vj 3 หลายเดือนก่อน +1

    Hallo Mr, help me, the information Electronic ? Batre?....Esc....brushles and proppeler...

  • @fpvlangy6931
    @fpvlangy6931 4 ปีที่แล้ว +3

    great job !!👌👏 😍

  • @martinengelbrecht8061
    @martinengelbrecht8061 ปีที่แล้ว +1

    Is there a slowed down version of the build where I can see some more detail of what you're doing?

    • @markoroolaid
      @markoroolaid  ปีที่แล้ว +1

      Unfortunately, it is not

    • @martinengelbrecht8061
      @martinengelbrecht8061 ปีที่แล้ว

      Are you able to post somewhere the positioning of your various components? My son has asked me to help him build one of these. Your video is of the sort I have purchased parts for.

  • @anmolkumar6704
    @anmolkumar6704 3 ปีที่แล้ว +2

    Can you find how much does this glider wieght originally?

  • @tomrammel
    @tomrammel 4 ปีที่แล้ว +2

    Nice work Marko, I also built a ducted fan model airplane from a free flight toy airplane.

  • @ErPirataRc
    @ErPirataRc 4 ปีที่แล้ว +2

    Nice video my friend👍

  • @connorkane8245
    @connorkane8245 3 ปีที่แล้ว +2

    how do you vontrol the servos?

    • @markoroolaid
      @markoroolaid  3 ปีที่แล้ว +1

      Hi, could you clarify your question.

  • @mrsmith4662
    @mrsmith4662 2 ปีที่แล้ว +1

    A job well done and neater than putting a prop on the nose.

  • @raiyanbashir1877
    @raiyanbashir1877 4 ปีที่แล้ว +2

    I was finding exact this video!! exact this one

  • @jeremyoshea7941
    @jeremyoshea7941 2 ปีที่แล้ว +1

    I have to do my homework I’m building these all the items are really hard to get right now is there any other propeller that will work that’s well made? Thank you for your time

    • @markoroolaid
      @markoroolaid  2 ปีที่แล้ว

      Hello. This is such an easy and creative project that there are no rules. I made it myself using what I found in the workshop. So good experimenting, you can do it

  • @EMTAx
    @EMTAx 4 ปีที่แล้ว +2

    Very good video. You must have a good camera man. Try to keep it more in focus tho.

  • @musaknshahmussu6056
    @musaknshahmussu6056 11 หลายเดือนก่อน +1

    Can you tell me what is the angle of motor mount

    • @markoroolaid
      @markoroolaid  11 หลายเดือนก่อน

      hi, same as wings

  • @Rturrito
    @Rturrito ปีที่แล้ว +2

    Saw a stupid reaction video to this before finding the original. Gonna build one too soon

  • @astr0yt344
    @astr0yt344 ปีที่แล้ว +1

    What charger did you use because I’m having a hard time finding a charger that is 500mah for cheap

    • @markoroolaid
      @markoroolaid  ปีที่แล้ว

      Hi, i use this charger www.robitronic.com/en/skyrc-rs16-charger-discharger.html

    • @astr0yt344
      @astr0yt344 ปีที่แล้ว +1

      Thanks for the fast reply I’ve never seen anyone reply that fast 👍

  • @RSTSamodelkin
    @RSTSamodelkin 4 ปีที่แล้ว +2

    Cool, I want one too!

  • @gmodesike
    @gmodesike 3 ปีที่แล้ว +2

    AWESOME!!

  • @RamoLasiaf
    @RamoLasiaf 3 ปีที่แล้ว +2

    Excellent -
    Build.
    Instructions.
    Flying.
    👍👍👍
    Thanks admin.
    Thanks all

  • @matejhlaca5171
    @matejhlaca5171 ปีที่แล้ว +1

    Helo...I like your project..What if I use motor 1104 Brushless 4300KV? it will be OK? Best regards

  • @lulufpv
    @lulufpv 2 ปีที่แล้ว +1

    Hi ! Just one question, did you remember what was the flying weight of the aircraft please.

    • @markoroolaid
      @markoroolaid  2 ปีที่แล้ว +2

      I don't remember exactly, but it might be 120g

    • @lulufpv
      @lulufpv 2 ปีที่แล้ว +1

      Thanks ☺️

    • @markoroolaid
      @markoroolaid  2 ปีที่แล้ว +3

      th-cam.com/video/Z8fX6q6rWFM/w-d-xo.html Answer in the video. Must be more attentive :):):)

  • @bogdog999
    @bogdog999 3 ปีที่แล้ว +3

    Nice work, and interesting solution to locating the motor. I have considered doing a pusher version of one of these gliders. Modding is where the real fun is.
    Happy flying!

  • @theBodger
    @theBodger 3 ปีที่แล้ว +3

    Excellent I got 3 to modify ❤️

    • @markoroolaid
      @markoroolaid  3 ปีที่แล้ว +1

      very good, after be sure to share your own solution, interesting to watch

    • @theBodger
      @theBodger 3 ปีที่แล้ว +1

      @@markoroolaid yes it will have a front mounted prop and I have a set of u/c from an old model. Trying to make a slower flyer to use on a Cricket pitch.

    • @theBodger
      @theBodger 3 ปีที่แล้ว +1

      Just uploaded short video on my channel, 👍not flown yet though,

  • @MrYeshwanthln
    @MrYeshwanthln 2 ปีที่แล้ว +1

    Brilliant job..!

  • @pscreativity9317
    @pscreativity9317 4 ปีที่แล้ว +5

    Same as me bro but yours is better

  • @lulufpv
    @lulufpv 2 ปีที่แล้ว +1

    Just a other question for the motor mount did you ad some down angle and right angle ? Or was it completely straight ?

    • @markoroolaid
      @markoroolaid  2 ปีที่แล้ว +2

      Hi, the motor angle is the same as the wing

    • @lulufpv
      @lulufpv 2 ปีที่แล้ว +1

      Ok Thanks

    • @lulufpv
      @lulufpv 2 ปีที่แล้ว +1

      I dis the mai de today ans… it flew ! even whit a 20 km/h wind i manage to make a 4 min Flight and l’and it properly

    • @markoroolaid
      @markoroolaid  2 ปีที่แล้ว +2

      super

    • @danilodiano8323
      @danilodiano8323 ปีที่แล้ว

      do you have an stl file to print the motor mount? or how have you done it? @@lulufpv

  • @waseemshah5865
    @waseemshah5865 ปีที่แล้ว +1

    Very nice 👍 ... what is the thrust of this motor 7500kv

    • @markoroolaid
      @markoroolaid  ปีที่แล้ว

      hi, about 80g

    • @waseemshah5865
      @waseemshah5865 ปีที่แล้ว

      @@markoroolaid very nice plane motor mount angle is 90°

    • @waseemshah5865
      @waseemshah5865 ปีที่แล้ว

      @@markoroolaid and which battery you use....
      Because I want to make this plane

    • @waseemshah5865
      @waseemshah5865 ปีที่แล้ว

      Can I use 300mah lipo battery for this motor

  • @Hangar11RC
    @Hangar11RC 4 ปีที่แล้ว +2

    Great fun!!!

  • @chrisellisrc8787
    @chrisellisrc8787 4 ปีที่แล้ว +2

    Nice job!

  • @Владимир-ч5т1щ
    @Владимир-ч5т1щ 3 ปีที่แล้ว +2

    Спасибо за видео! Я пересмотрел очень очень очень много видео конверсий народного планера. (в России его так называют.) я нашел всего две самых лучших переделок, одна из них Ваша. Вопрос, как ведет себя модель, при резкой подаче газа? Обычно ставят толкающий винт с выкосом, а у Вас тянущий. Ось тяги винта расположена выше ц.т.

    • @markoroolaid
      @markoroolaid  3 ปีที่แล้ว +1

      Когда самолет летит, он вообще не знает двигатель. Двигатель расположен под таким же углом к ​​крылу.

  • @mode2fpv
    @mode2fpv 4 หลายเดือนก่อน +1

    where is the cg on this model ?

    • @markoroolaid
      @markoroolaid  4 หลายเดือนก่อน +1

      CG in the first third of the wing

  • @teddotesio-eyers5909
    @teddotesio-eyers5909 2 ปีที่แล้ว +1

    Very good! How well does it glide (when the engine is off)?

    • @markoroolaid
      @markoroolaid  2 ปีที่แล้ว +4

      Hi Ted. When motor off it glide like a rock :):);)

  • @smashrc8481
    @smashrc8481 4 ปีที่แล้ว +4

    Certainly better now

  • @pabodhasahasmika
    @pabodhasahasmika 3 ปีที่แล้ว +1

    Superb video

  • @МастАрт
    @МастАрт 4 ปีที่แล้ว +3

    Круто у тебя получилось.

  • @snoopysnoopyxupery5231
    @snoopysnoopyxupery5231 3 ปีที่แล้ว +1

    Good video! Did you straighten the wings with an iron?

  • @coverdestroyer3572
    @coverdestroyer3572 2 ปีที่แล้ว +1

    Where is the cg position?

    • @markoroolaid
      @markoroolaid  2 ปีที่แล้ว +1

      The CG is located 1/3 of the wing width from the leading edge

    • @coverdestroyer3572
      @coverdestroyer3572 2 ปีที่แล้ว +1

      @@markoroolaid ok thanks man

  • @sathyaevmjmj997
    @sathyaevmjmj997 2 ปีที่แล้ว +1

    Hi bro can you give the motor mount lasercutting file

    • @markoroolaid
      @markoroolaid  2 ปีที่แล้ว

      I don't have it unfortunately, it's been asked for a lot but I didn't stock it properly and now it's gone. However, it is so simple that I believe you can do it yourself

    • @sathyaevmjmj997
      @sathyaevmjmj997 2 ปีที่แล้ว

      @@markoroolaid ok bro thanks

  • @theBodger
    @theBodger 3 ปีที่แล้ว +1

    Check out the latest Chuck glider into a Biplane 😂😂😂🤪 just uploaded a short video, any comments would be appreciated.

  • @orzOTZorz
    @orzOTZorz 2 ปีที่แล้ว +1

    1:54-1:59 is very suggestive. 😂😂😂😂😂😂😂😂

  • @SharneAndrews
    @SharneAndrews 2 ปีที่แล้ว

    Great stuff. Mind if I share on our aero modelling club website?

    • @markoroolaid
      @markoroolaid  2 ปีที่แล้ว +1

      It would be very nice. Be sure to do it. Big thanks

  • @sumutcyindustrial3995
    @sumutcyindustrial3995 2 ปีที่แล้ว

    Terbang berapa menit dengan baterai 500mah

  • @daviddavids2884
    @daviddavids2884 4 ปีที่แล้ว +2

    some info. at 1:53, any free-flight model Must have nose-up deflection/trim built into its horiz-stab. evidence of this is Seen in the fact that, the main wing and horiz-stab openings, are NOT Parallel to one another.!!!!!! thus, conversion to rc Must, either, Eliminate this built-in ANGLE (and replace it with a movable elevator); or use LESS aoi, at the stab. googletranslate

  • @antodawet1775
    @antodawet1775 ปีที่แล้ว

    Pesawat yang bagus....

    • @markoroolaid
      @markoroolaid  ปีที่แล้ว

      Terima kasih banyak dan salam dari Estonia yang dingin dan bersalju

  • @romashin921
    @romashin921 3 ปีที่แล้ว +1

    На радио и дурак полетит, попробуй чтоб свободный полетел

  • @daviddavids2884
    @daviddavids2884 4 ปีที่แล้ว +1

    at 5:12, when ailerons are added onto the trailing edge of an otherwise complete airfoil, the airfoil is Changed; to a not normal state. the use of full strip ailerons is not recommended. on a model, a control surface Should have the shape of a Parallelogram!!! at 5:24, horiz-stab correctly made level. while (the Mass of a) servo is STOOPIDLY located at the tail!! covering the elevator with regular monokote, INCREASED its Mass!!!! Significantly. by, maybe, 50 PERCENT. that is NOT smart. googletranslate

    • @EmmanuelFernandoSIbay
      @EmmanuelFernandoSIbay 3 ปีที่แล้ว +2

      But then, even if what you said were the proper procedures to design and build an airplane, you can't argue with the results because this converted aircraft flies wonderfully.😉

    • @theoztreecrasher2647
      @theoztreecrasher2647 2 ปีที่แล้ว +1

      @@EmmanuelFernandoSIbay Yep. Whereas our friend's Infinity designs (Perpetual Motion Machines) don't seem to have got to the patentable stage yet! 😜😁

    • @phearz0r
      @phearz0r ปีที่แล้ว

      i reckon the extra weight helped the plane overall, it was originally 49g and then was 120(iirc)

    • @roberttperez1153
      @roberttperez1153 9 หลายเดือนก่อน

      The rear added servo weight is fine due to the fact that a considerable amount of weight was added to the nose of plane. The battery, receiver, ESC, motor, and mount balanced the plane rather well. As far as the wing foil the difference of shape is very little on an rc plane. Especially a small plane. Wing can be completely flat and it'll work fine. Air foils are very important on actual real man flown planes for lift due to the size of wings and airflow. One last thing. If you don't have anything good to say you shouldn't say anything at all. Rude remarks show how you need to work on yourself. Face and heal from how you have been treated in such manner. Don't treat others rudely if you're having a bad day, or have been treated rudely by someone else. The people you let out your anger are not at fault and didn't do anything to you. If anything find the person or situation that caused you to feel angry and deal with it. Resolve the situation so you won't get angry or feel hurt. If that's not possible then it's better to release your pain punching a pillow or exercising. Find a place where you can be alone and scream as loud as you can is another option to make you feel better. Peace. Great job to the one that build and made video of rc plane. Congratulations.

  • @truth409
    @truth409 2 ปีที่แล้ว +1

    Here we go on TH-cam again with another ridiculous impossible For the masses have to have power power power power power and then they quit the hobby in 9 months..

  • @AAAAAA-iw9wk
    @AAAAAA-iw9wk 4 ปีที่แล้ว +5

    Can you share file which you used for cutting motor mount ???

  • @AAAAAA-iw9wk
    @AAAAAA-iw9wk 4 ปีที่แล้ว +2

    What is the weight and flight time ?????
    And can you tell me a suggestion for how I can make motor mount??

  • @AAAAAA-iw9wk
    @AAAAAA-iw9wk 4 ปีที่แล้ว +2

    What is the weight and flight time ?????
    And can you tell me a suggestion for how I can make motor mount??

  • @AAAAAA-iw9wk
    @AAAAAA-iw9wk 4 ปีที่แล้ว +2

    Can you share file which you used for cutting motor mount ???

    • @markoroolaid
      @markoroolaid  4 ปีที่แล้ว +2

      Hi, sorry,I don't have it anymore. But it's so easy to do. I believe you can do it yourself.

    • @AAAAAA-iw9wk
      @AAAAAA-iw9wk 4 ปีที่แล้ว +1

      @@markoroolaid no I cannot

  • @AAAAAA-iw9wk
    @AAAAAA-iw9wk 4 ปีที่แล้ว +2

    What is the weight and flight time ?????
    And can you tell me a suggestion for how I can make motor mount??