AMD R9 5900X Overclocking Guide - ASUS STRIX B550-E Gaming
ฝัง
- เผยแพร่เมื่อ 6 พ.ค. 2024
- AMD R9 5900X Overclocking Guide - ASUS STRIX B550-E Gaming
This is an overclocking guide for the Ryzen 9 5950X, 5900X, R7 5800X, and R5 5600X using the ASUS ROG STRIX B550-E Gaming motherboard. This guide is somewhat applicable to all ASUS B550 and X570 boards and Ryzen 5000 CPUs, but it was created for the R9 5950X and 5900X on a B550 board.
#5900X #Overclock
Warning: Any and all overclocking not only voids your warranty, but has the possibility to degrade or even destroy your CPU. This video is a demonstration of the settings which worked for this setup and may not necessarily work for you. I will not be held accountable for any problems that occur.
Intro - 0:00
Warning - 0:51
Software - 1:13
All Core - 1:50
PBO - 6:36
Get access to the discord: / graphicallychallenged
FULL DISCLOSURE
Amazon has given me affiliate links which send me a percentage of each purchase when you use them. Additionally all CDK deals links are sponsored links.
END DISCLOSURE
Specs
RAM: 16GB @ 3800MHz 15 14 14 14 (1.47V): amzn.to/38Hh8C0
CPU: R7 5800X: amzn.to/39zUlfg
MOBO: ASUS X570 TUF Gaming WIFI: amzn.to/38O02CC
GPU: RTX 3080 FTW3 Ultra: amzn.to/3t9dagV
CPU Cooler: NZXT Kraken X62: amzn.to/2JJpXkL
Storage: 2.5TB PCIE/SSD: amzn.to/33f0etc
Case: Thermaltake Core X71: amzn.to/2W4KJmi
Thank you to CDKDeals for sponsoring this video!
CDKDeals(20% Coupon Code: GPC20)
▬Windows10(16.73$): bit.ly/3m5LGpg
▬Office2016(42.92$):bit.ly/3wbQrCl
▬Office2019(47.68$):bit.ly/31xC11c
(Prices listed reflect the cost after coupon code is applied.)
Music
Intro: Mushrooms by Komiku
Outro: Everyone by Monplaisir - วิทยาศาสตร์และเทคโนโลยี
What CPU are you using, and are you overclocking? Let me know your thoughts in the comments below!
Running a 5600X under a shared 240 loop in push pull. PBO2 of -18 with motherboard limits disabled and maximum boost clock override lets me hit ~4.85 GHz while gaming with 75C as the highest temp. Also increased my Cinebench R23 multi core score by ~4% and single core score by ~7% with same exact temps as stock of ~62C. While temps do increase slightly during gaming, my system stays whisper silent and free performance is free performance. Amazing utility!
Can’t get one. Been trying to get a 5900X for a while now
I am running a R5 3600XT on Asus x570 plus motherboard without overclocking. Using a Wraith Spire air cooler, it's just too hot to oc atm even if I wanted, my cpu would cook like an silicon egg 😆lol.
@@HasselHoffman-im5he you missed it! A week and a half ago, 5900X were on AMD'S site for 3-4 days before selling out.
@@AwankO damn it lol
Thanks for this. Haven't seen this explained in such easy terms.
for anyone having trouble, make sure to go into Advanced tab -> AMD Overclocking -> Precision Boost Overclock -> Disabled.
Cool change of pace for the video today! I'd love it if you made another going into more detail about what all the different voltage controls do in the bios and what's good/dangerous. I mainly just use pbo on my 5950x because I use this system for gaming but would love to learn more about manual overclocking
I'm a beginner and this is exactly what I needed. Keep up the great work!
I know this is 10 Months ago don’t overclock your PC Stay away from this your making your PC Over Run what it should normally do it will Burn the Processor
@@ghostfacespooky3936lol
how much do you recommend increasing the voltage. I am trying for 4.7 ghz and wondering how much i should increase the voltage by
A good over-clock starts with an under-volt, then boost increases frequency to use up the heat & power budget without pushing more current through the CPU.
All core optimises the uncommon high load evenly spread load case, which frankly stuff like render farm conversion is better on a separate server box rather than a workstation
I'm pretty new to overclocking I have a x570 gigabyte gaming x motherboard, 5900x cpu and a 6800xt red dragon gpu. I just want a basic overclock do you guys think these same settings on the video would work on an x570 mobo? When I first started messing around with overclocking I had PBO on and I used ryzen master auto OC and kept getting crashes in games so I just turned off PBO and I've just been running it at 3.7 GHz. Any advice would be awesome, thank you in advance!
This helped me so much! One issue I'm having with the all-cores method: When I monitor my frequencies and voltages, it seems like the CPU won't downclock even when idle. It's just always locked to the overclock speed. The utilization and power on each core do both drop, but the frequency and voltage remain locked. Is this an issue? How do I address it?
Thank you for this video it really helped me get my overclocking done right!! I appreciate this video.
Thanks for watching!
My cinebench multicore score using PBO is 20906. Is this good?
Would you recommend applying these settings on a Asus Crosshair Vii hero wifi x470 motherboard?
Im more fascinated by this guys intro more than the products lol
I know its his thing but sometimes I just want to chill and his energy grates me the wrong way. Not his fault, more power to his spaz, but at times I’m just like… meeeeh…
What do you think of adding Asus Performance Enhancement and Fmax Enhancer to PBO? Right now it seems like a good boost, adding a little more heat on the CPU, still below 80C though.
great video thank you! Will be hoping to come back and revisit when/if i get this CPU of my dreams. One thing that freaks me out about PBO are those voltages. Is it something to worry about? My 2700x was always at 1.35 which was more than enough to get it at 4.2ghz
What an amazing video for people like me - writting the settings down, explaining how to go above or below and what it'll do. Great job! Im going to try it out now .. Hopefully all will go well :D
Well that seems like working as it should! However, I'm getting a stabile "Cinebench multicore" test at 70c .. Should I just stay there or should I try going higher? If so, is it just setting like 4.6ghz or do I need to test/ change other stuff out also? :D
Can you please share some light on the 2 PBO menus in the asus bios? AI tweaker / AMD overclocking
Should i copy your settings ? Or Only the ones u mention? Plus cpu goes back to 4.2 “default” after reboot rest if the changed settings stays the same
On the PBO example you give... if I want my CPU temp to be 3 degrees C cooler, would I change the value 300 to a lower value?
Sometimes I don't have time to watch the whole video but I make sure I click on it to see the intro
Thank you for the video sir
i have 5900x also
when i did auto tuning
my speed is 4.17 ghz my voltage is 1.088v
i get good temperatures so far
my question is should i do the same setup with yours
will i have problems
and what happens if all my cores work 4.5 ghz
will it hurt my cpu or my cpu will not last long for a long time
and also i have asus prime x 570 motherboard
Ai Tweaker DIGI+VRM
i didnt see VDDCR cpu load line calibratrion
my menus are different so i had to skip that part
when i test cpu with furmark with 24 threads
temps were 105 i had to quit
sorry my english is not good
thank you
Thanks for this video! Very clear and easy to understand! I'm running the same setup - might just give it a try :)
Thank you! After watching this and some other dude's video on the curve settings, I did PBO how you showed and a conservative negative 9 all core offset. If it has issues, I'll just back that off to a 5 core offset. I'm not one who wants to spend a month tinkering, I just wanted to set it and forget it! Your video really helped me see how to set PBO properly. Thank you!
Exactly the CPU and Mobo combo I plan on getting. Thanks!
Thanks for watching!
I notice that your FCFrequency is set to 1900MHZ. I have 3600 ram and mine is set to auto.. should I change that? I have the same mobo and 5900X CPU. With 64gigs of 3600 DD4 memory. I got a score of 21000 or 22000 not 29000
Can I do this even though I have different Motherboard I got a ASUS tuf gaming x570-plus (wi-fi)
Thanks for the great video. 5900x at 4.5 with 3200mhz memory was a better score than PBO which was slightly lower than stock. My score was 21959, 900 points higher than stock. Going to run this for a bit to make sure all my programs are stable, then go for 4.8 and try that. Temps were in the low 60s stress testing and idle is in the 30s, my setup has a custom loop for cooling.
So you dont use the advance tweaker for PBO and CO and TDC, EDC, PPT just the AI Tweaker?
Tip when using cinebench r23 do the multicore test with 30 mins, if it doesn't crash on that then your sistem is gonna be rock stable. Mine wasn't crashing AIDA 64 with all 3 settings checked after hours and hours of stressing, but with cinebench r23 with a little over 10 mins of stress test it was crashing, everytime I was trying, and like that I've found that I've needed to lower a little bit my clocks, 50 MHz ti be more precise.
That intro though
How do you have the resize bar on the top right, mine doesn’t show for some reason
hi , thank you for the video ! i have a ram question i have a ASUS STRIX B550-E Gaming + AMD Ryzen 9 5950X how high can i go with RAM ? i got kingston hyperx fury 3200 mhz 4x 32 gb ( i need something faster ) i don't know enything about ram . . i hope you can help me
DRam Calkulator 1.7.3
I've tried both and PBO with a negative 15 on the curve optimizer (another great feature built in) works great and is easy to set up.
Thanks for adding time stamps
Awesome video! For some reason, the PBO OC doesn't work on my mobo. I have a ROG Crosshair Hero VI and a 5900X. This mobo has support for the 5900X since last summer. The all-core OC works excellently. When I put it in PBO mode, the board locks the clock at 3700 MHz max. It does throttle down, but not over the 3700. I had the same issue with my 2700X and 2900X. Do you have any idea why this is happening? I've searched all over Google and can't find an answer.
This comment was from at least year ago, so I hope you're not still trying to get this to work. But for anyone in a similar situation: I have a Crosshair VIII Hero and recently was trying to adjust PBO settings, and nothing was changing. In my case, the "Extreme Tweaker" category in the BIOS, where all the main overclocking options are, has a PBO adjustment menu that does absolutely nothing. But under "Advanced > AMD Overclocking" there is an identical menu that actually *does* work. I have no idea why.
The easiest option is to just use Ryzen Master to adjust PBO. Keep in mind that even though Ryzen Master is software that runs in Windows, it just changes those same BIOS settings. So uninstalling Ryzen Master doesn't revert the settings, and even if you revert within Ryzen Master it might be worth double-checking BIOS to ensure things are set correctly.
@@Toxijuice, I was aware and using the PBO settings under the AMD Advanced settings. I did not try undervolting or other more complicated tweaks. But I was never able to get the performance I thought should be there with the PBO in the mobo. I also tried Ryzenmaster, but it requires more patience than I have to give. You need to reboot the PC a ton of times to dial anything in, but you also have to reboot with the BIOS setup, so you can't win. I ended up dialing in a very light OC, and it's been working well for a long time. It could be tweaked to do more, but I'd rather have it stable. I did get a 4.65 all core OC working without issues, but it produces too much heat. I'm not even using PBO, and relying on the "regular" BIOS adjustments, which perform slightly better on my board. My 5900 is in the correct window of performance for "stock," and it produces a lot less heat. Thanks for answering my comment, that was very cool!
Theres also Curve Optimizer (in the overclocking menu in bios) and ClockTuner for Ryzen by 1usmus for in Windows. Those will give better results with less heat.
CTR gives worse single-core performance, _and_ it's less stable.
Bronze and Silver samples are better off dumping CTR and perfecting their Curve Optimizer.
So, how much of a performance boost for gaming does this actually give you? And is it better to use the Ryzen master PBO or man OC method?
Ryzen master at 4.5gigahertz gave me an extra 15 fps increase, I have a ryzen 9 5900x and a amd Radeon rx 6600
This is exactly what I needed
I have a 5 5600x I’ve been trying to overclock it to 4.5 or 4.6 but it always reverts to 4.2 when I open windows I followed the tutorial but nothing works any ideas?
What volt do I put if I want to go for 4.6-4.7ghz?
Is b550 good enough for Ryzen 7 3800x overclock
I followed the first step and now my PC wont even boot. It goes to turn on, but then it powers down. The fan takes off and then it stops. What is going on?
So disable pbo in ai tweaker and enable pbo2 in advance settings?
When I done auto overclock my Power deviation reporting dropped down to about 70%. You know much about this?
I watched dudes video on the 3900x and now watching again for a 5950x much love
One thing that I noticed but didn't comment on is that you have your RAM running at 3800 and if you have not done anything else then you will be running you FCLK and UCLK at a data rate of 950 or 1,900 MHz.
You will only be running 1:1:1 with MEMCLK, FCLK and UCLK up to 3600 or a data rate of 1800. As soon as you go above that the FCLK and UCLK will automatically get cut to half of your MEMCLK setting.
So basically you will have crippled your memory performance.
Thanks, I just got an ASUS B650 and I was very confused by the BIOS. It is very different from ASROCK, Gigabyte, MSI which I have worked with a lot. Currently my 7700x is crashing with PBO, hopefully changing memory helps but now I see how to set the all core OC on ASUS I will have the option to try that as well.
Appreciate the info. I'm going to refer friends to this next time they ask me 😂
Hey GC, I used grease on my cpu to make it faster instead of thermal paste but I think I fried it do I send the receipt to refund my purchase to you?
How did the refund go? Did he cover shipping and replace your jar of Crisco as well?
@@IMiteBeWrong no but he used the bottle of grease I had and a baseball bat and I woke up an hour later and my asshole hurt
@@johncapone8843 Excellent.
He went above and beyond! Another satisfied customer...
Jesus christ finally a video that's understandable thanks alot for the useful information 🙏
Dude these intros just keep getting better 😂
The intro always gets my like 👍
Built a new pc and I switched to AMD for this build. Ran into some problems a few hours after installing windows with BSOD likely due to overclocking and undervolting. Gonna give this a try and see if it works
I need help because it's not saving my changes. I have Ryzen 7 5700x
To the best of my knowledge, if you overclock your CPU & RAM by activating Precision Boost Overdrive & XMP in the bios do not void the warranty as those are features of the components by the manufacturers.
Decent guide but how are you going to do a Ryzen 5000 OC guide without mentioning Curve Optimizer? I use Curve Optimizer and PBO with custom limits for Ryzen 5000 overclocks. That's how I have one of my 5900X's hitting 5.2Ghz on a 240mm AIO.
Nice 👍
Give me the recipe
@@sunnydaleslim4050 Set PBO to motherboard limits or manual limits. If it's a high end mobo, then motherboard limits should suffice. Set Max boost override to the highest setting you can get to run stable. I think 200mhz or 300mhz is the max. Maybe start at 100mhz then go up by 25 until you get instability, then drop back down a bit. Change Curve optimizer to "per core" then set the voltage offsets for every core to negative offset and as low as you can go while maintaining stability. I think -30 is the max. Safest way is to start at -5 on each core, then go down by 5 each time. If you get a crash, go back up 5 on all cores and start bumping the voltage down on each core by 5 until you find good stability at the highest voltage offset. Maybe I'll make a tutorial soon.
Enabling DOCP on my 5900x wont make my system post, i have asus x570-f mobo, and oloy warhawk 3200mhz 2x8 RAM
Is 1.3 volts not crazy high for a cpu?
I got higher temps when set the pbo stuff to what you said. And the level 4. Tested with that stuff on auto, and temps was better. I just have a 240 aio, cus small cabinet, so it gets hot
Very helpful! I was getting sick if the up and down news about consumer GPU status.
Good vid , Very clear .
OK. But it hardly changes anything from the default settings. I have a Ryzen 9 5900X. Cinebench 23 gives a few points of difference
Super video thanx. Works for me @ 4.6 GHz and temps are decent in fs2020 at 50C. Only problemen is CTD after some time, but not sure if its OC related. Figure I can go up even further because all core CPU usage is low in fs2020. Cin23 crashes the PC at 4.8GHz and 1.225 V. Ryzen master drove me crazy and kept clocks at 4.2 GHz for some reason so I uninstalled it.
I wasn’t able to change the 300 part near the PBO
Dan it, I tried this video and my pc broke. I don’t know if it steps I followed wrong but 😢
I am positive I copied everything in the video and set my voltage to 1.26, 1.325 and 1.425. But every startup froze or blue screened. I did 4.45ghz. Any suggestions?
Ryzen 7 3800x
2x8 trident z rgb 1.35v, 3600mh, CL18-22-22-42
Maybe your motherboard is the problem. It may not support ur ram speed.
Okay, but that Ryzen do be lookin kinda sweet doe
That energy! Thumbs up.
Seems very ecstatic to overclock
So I tried this and now my pc won’t even go into windows? What’s going on?
I wonder how difficult it would be to have an OC boost on a r7 5800x to a solid 5ghz on a x570-f with a 3070, 48gb of ram at 3200mhz with a 240mm AIO and a 750w psu
Bang4buckgaming has a video running a 5800x at 5ghz. Gaming only but he must have a platinum sample.
I had the exact same speed when I ran cinebench for some reason
Is it wrong to put 2 pieces ( SAMSUNG 980 PRO 1TB PCIe NVMe Gen4) in this motherboard b550-E ???
No.
Love the animal growl!
lmao i just love your intros
Is there any benefit to using this method over ryzen master?
Yes. The BIOS never has to be opened up again.
is this safe to do?
Dude, your BIOS is showing 5950x not 5900x ... Are you fooling us?
Maybe u wanna listen to the first 20 sec of the vid
Why is your memory frequency set to 3800mhz but DCOP is 3600mhz?
Noticed the same. Though Z2 used to take a decent hit when going above 3600 depending on the Fabric clock. not sure if Z3 benefits from 4000+ due to fabric tweeks or not.
I didn't need my 5900x but for 100 more I thought why not get the best better as last am4 chips.
I disabled SMT and enabled pbo and on a cheap twin tower air cooler I'm getting 4.9ghz in 2 core heavy games (mass effect 1 LE), 4850mhz 4 core and 4700mhz upto 12 core with temps under 70 degrees.
know I'm wasting the SMT but I currently don't need it and like doing what it can do with just 12 true cores
4.7 with no SMT and pbo beats a stock 5800x in R20 with temps of 63
Sold my 3070 a week ago to help pay for my 3080ti FE and it ended up going for £880 - and today I saw brand new 3070s going for under £800. And at the time I'd undercut the other cards on ebay by around £70 as well. A week before that they were going for £1050.
bro im gonna build a pc tomo with 5900x and 3080 is it worth overclocking also ly :)))))
PBO is definitely worth it. It's very easy.
i could run a 4,5 all core just with DOCP on, AI on and a multiplier of 45 ... DONT do Voltage ! boot in system gives me a decent 1,208 max all core voltagge under full load ! hwo about that. what i am going to do now is try the DIGI VRm stuff you did and the PBO setoff´s and see whats changing... at this point i dont believe there is a manual setup to Voltage necessary
My pc won’t post anything after 4.3gh
Your the best 🙂
Thanks for watching!
I was able to get 4.8Ghz to work but I decided on 4.5 so that I don't stress out the CPU as much. It's stupidly fast either way.
This is with a B550 mobo, will there be any significant considerations following this for X570?
My CPU is stable on every software except for AIDA. AIDA crashes even on settings I know are stable considering I can play 10+ hours straight with them.
Best cpumobo combo for daily user.
I downgraded from 5900x to 5600x.
I have a 5800X/4.7Ghz all 8 cores/1.275v and is just fine for me👍
Random question. So I have an i7 7700k what cpu can I upgrade to without having to change my motherboard.
I think your at a dead end there.
This literally my build
Can you do one for the 5800x
same process.
though id suggest a few other vids not only this one. Unless this is exactly your setup.
This is exactly the combo I am looking to get.
Reasons:
Supports dual GPU
Thunderbolt support
Question: Is this the best motherboard to get for the money?
the only guys I trust 😍😍
I just got a 5900x threw my hat in the ring before but got scared because of voltage I got 4.85 all core
Overclocking new ryzen CPUs hardly worth the effort. Just turn on precision boost overdrive and let the CPU decide how to boost clocks to optimize performance.
I follow this and my pc won't start now, cool. Ryzen 9 5900z + 3080ti
Personally thr PBO clocked my comp to 4.2 clock speed and my score was near the same somehow lol
Atleast I think so, but my temp also went down by 30°
Using PBO2 is a better solution. Frequency with light load (1T) will reach 5GHz+ while heavy load (all T) will also run at 4.4~4.6GHz, according to Power Limits defined in the Bios.
How much degradation have you gotten? Looks like it’s locked at 1.20-1.30. So there shouldn’t be any.
0
I'm scoring no where near those doing the exact same settings 😅 22k is all I can get there must be somthing els 🤔
22k still amazing lmao