HSP Flying Fish brushless set-up, upgrades and drift test.
ฝัง
- เผยแพร่เมื่อ 4 ส.ค. 2024
- My budget basher and/or drift car is slowly coming together!
A few new parts, a 4s brushless system and set-up talk.
Front gear box mount
www.ebay.com.au/itm/Hsp-1-10-...
Rear gear box mount
www.ebay.com.au/itm/102061-HS...
3670 2150kv 4s motor
www.ebay.com.au/itm/New-3670-...
120A 6s compatible esc
www.ebay.com.au/itm/25A-35A-4...
Please LIKE, SHARE and SUBSCRIBE, feel free to leave a comment or ask a question and I'll get back to them asap.
I would love to review/test more RCs or RC products but definitely need some help, please reach out to me via Email or my Facebook page if you would like to work with me to review any RC product's, it would be GREATLY appreciated!
Contact via
Email
saulaldridge@yahoo.com
Facebook
/ rc-crazy-110316407770980 - บันเทิง
![[ไฮไลต์] แบดมินตันชาย วิว กุลวุฒิ (ไทย) vs LEE Zii Jia (มาเลเซีย) รอบรองชนะเลิศ | โอลิมปิก 2024](http://i.ytimg.com/vi/mvBiEAqlssw/mqdefault.jpg)
I love these things im about to go brushless as well, Enjoy that fish!!
Yeah there awesome cars!
Fun with brushless👌
Awesome drift car🥰👏
Thanks Rene😁
It's still needs a little work but it is awesome👌👍
Me and my mate have these and we took the drive shaft out for the front wheel drive so it converted all the power to the rear wheels very fun starter for a drift rc car
They are great and very affordable drift cars, parts are super cheap also!
I would imagine it would be quite a handful only Rwd😄 good fun though👍
Looks like a nice brushless setup. Also, I agree about needing a upgrade on the steering servo.
Yeah the servo is terrible, but I have tried a 13kg mg servo and it seems a bit tight or it's binding on something, I have to check it all because there's something going on🤷♂️
@@rccrazy yeah. You can't have anything binding up or it will burn up the new servo. That wouldn't be good.
I just hope it's an easy problem to find, and then easy to fix🤞
nice vid bro. subbed👍👍
Thanks mate, greatly appreciated😁🤘
Nice drift car last hsp I had was a nitro 👍💪🏽
For the price there great👌
Yeah iv had a few nitros, not big on nitros anymore but I'd get one for the channel maybe.🤘👍
↙️awesome bud
My next project for this hsp on speed run soon!
I hope you do better than me, they are definitely not good for going in a straight line😅
I have old Redcat Volcano. I just may make it into a drifter. 👊😀
Nice👌 mod time😄🤘👍
What springs you put an the typhon bro!
Sorry mate, missed this question🤦
The rear are the one that came with the GPM shocks on it, the front are also GPM shocks now aswell👍
Hey man, so there is one offer i am getting about some very old henglong touring car 1/10 with metal chasis and brushed motor, and another of flying fish brushless with plastic chasis, what do u recommend? Henglong can fit hsp parts as well i think pinion amd diff are different though
Also 1 more thing, are hsp flying fish good offroad bashers with touring wheels on? I mean brushless, are parts easily breakable or something
Hey👋
So to your first comment, I have no idea about any Henglong cars so I can't help with that, sorry.
HSP Flying Fish are definitely on-road cars, I wouldn't take mine off-road anyway😅
But I find HSP parts everywhere (in Australia) and SO cheap, not sure where you live but I think HSP is quite well known worldwide, should be able to find parts somewhere.
You can buy buggy swingarms, driveshafts and tie rods and make it a off-road car if you really wanted, that would be sweet🤪
@@rccrazy i do want to make one rally build lol, ill have to do some research on that
Oh actually yes if you want to just go rally then all you need is rally wheels/tires.
I think I forgot rally cars existed for a few minutes🥴🤣
@@rccrazy the main thing thats on my mind is, how would i clean it afterwards lol
Wait. I remember this place r u the one who feature sg-1603?
I have a sg-1603 that I drift and bash in my driveway so its quite possible🙂
i upgraded mine to a 3650 3900kv and also changed stock brass pinion and plastic spur for all metal. I use i believe a 29 pinion with 64 spur (stock was 26\58) but the motor mount is on its limite to allow the correct mesh. I know they are sold with this pinion\spur configuration on the brushless version so was xpecting a little bit more margin on the motor mount...
I don't understand how 26/58 meshes but 29/64 doesn't, your 3 teeth more than stock🤔
The only way that is possibly is if you changed the mod/pitch from large teeth to small teeth, mod0.8 to mod0.6 or whatever it would be in diametric pitch.
@@rccrazy its the stock gearing for the brushless model 0.6m 29pinion 64 spur and the same they sell on alliexpress for this model. 26/58 is for the brushed version from absima at least which i have been using till yestsrday. Honestly, it is super smooth with the 29/64 brushless setup, the only thing is like i said its on the limit of motor bracket. Also, after 20 minutes the motor is barely warm with no heatsink or fan.
Well if the motor is basically cold without a fan just increase the size of the pinion gear, it will be able to mesh better and it will be faster
Win win👌
@@rccrazy impossible to go bigger with stock motor mount. I will probably go smaller for 26 pinion from the brushed version. Yesterday beat the hell out of it and the motor heated up but still could press.my finger more than 5 seconds so still in the acceptable range. But if it dies, it dies, it was a 40eur brushless combo, nothing that will break my bank account if i have to order another one lol
Oh you mean it's at its maximum limit not its minimum in gears size?
If that's the case you could've just gone 29/58, would be faster but your motor may get even hotter.
That's why I use a big can size motor like 3665 to 3674 and mod1 gears, much cooler running temperatures and just ridiculously fast with crazy gearing.
I'm getting 80kph on 2s easy🤯
Hey man where do you get all these parts now as there was a full kit of ally parts now its all gone off ebay
I got them from ebay myself, I know they come and go so maybe everyone is out of stock.
Disappointing if there no longer available☹
@@rccrazy im really hoping they get the parts I am after in stock as its a great base to start on
It sure is a good starter!
Most people buy them specially because the parts are so cheap and easy to find, it would suck if the parts disappear😱
Is there many rc Facebook communities that you recommend
I'm not really great with Facebook so I try not to join many groups, mainly just friends groups or car specific groups.
Sorry mate😔
I drift the same car. My opinion is that the car don't need much power than stock. 3650 3300kv. Is enough on 3s lipo.i think is not a car for speed runs.. cheers
I agree to a point, because the touring car version is the same car just with rubber tyres so technically it's both, but no it's not made for speed.
This is a street basher project though so it's not staying as a drift car, sorry if that's what you though✌
All opinions matter to someone, thanks for yours👌👍
@@rccrazy i have seen the motor.3670 .i think that's way bigger than an 1.4kg car needs! Cheers ✌
Seriously! Is it a pick on Saul day😠
It's not a case of need it's a case of wanting to build a powerful street basher and this was the cheapest way to make a overpowered 4s street basher, im not sure why it really matters what I do with my things anyway!
It's a project iv wanted to build for a while so sorry, but thanks for you concern😅
@@rccrazyIt's just me or you taking my comments to personal? I am just saying mate!I have nothing against your projects!🙂
Your comment does looks like you do not like the idea, personal or not it's my idea and if someone says bad idea then it definitely feels like disapproval.
Some of my subscribers will know I suffer from many mental issues, apologies if you didn't know that but it definitely plays a part in raising my anxiety level seeing comments like that because I do actually know what I'm doing.
Grouse bro! Been thinking of getting a flying fish which on is that??
This is a flying fish mate, just the Toyota Soarer version.