HSP Flying Fish Street Basher, mod1 gearing and servo test!
ฝัง
- เผยแพร่เมื่อ 17 เม.ย. 2021
- I think it's going to be a little bit more of a challenge making a street basher out of this very simple 1/10 drift/road car!
Mod1 gearing was essential if I wanted much higher speeds and better punch.
There is still some sort of binding or lag in the steering even after upgrading to the new Power HD 13kg MG servo🤔
Power HD 13kg servo.
www.ebay.com.au/itm/Power-HD-...
11-30 tooth pinion gears.
www.ebay.com.au/itm/M1-Mod1-B...
Front hinge pin mount/brace.
www.ebay.com.au/itm/Hsp-1-10-...
Rear hinge pin mount/brace.
www.ebay.com.au/itm/102061-HS...
Facebook
/ rc-crazy-110316407770980
Email
triple7rc@yahoo.com - บันเทิง
![fellow fellow - Proud [OFFICIAL MV]](http://i.ytimg.com/vi/9uZF7BlUQPE/mqdefault.jpg)
![10 of the BEST RC Cars EVER [Street Basher Edition]](/img/n.gif)
Excellent review and cool video 😍👍
Thanks Rene🙂👍
Nice upgrades man 👍
Cheers mate🤘
Gotta get some better wheels now though, looking at some Protoform wheels🤩
Looks like it’s fun to drive 👍
Absolutely!
Can't wait to try 3s and 4s on a decent stretch of road, hope it hits 100kph🤞😄
I reckon the council put them speed humps out front of your joint cos some grannie complained about a strange man hooning with '"those wretched little cars'"' up and down the street!! 🤣🤣😜😜🤙
She forgot about the off-road basher though, send it🤣🤘
I can’t wait for mine to come and new sub here and Australia 🇦🇺 🫡
Thanks Kirk really appreciate it!
Yes they are super fun cars at a great price😁
@@rccrazy yes they so are got mine 3 days ago and loving it can’t go wrong with a $249 Rc drift car
Hey, I was wondering, did you modify anything on the car to fit the wltoys 144001 shocks? Also may I know why did you swap out the stock shocks in first place? Thanks in advance!
No mods needed to fit 144 shocks👌
And HSP shock aren't great, almost ever one iv had popped(e-clip holding the piston to the shaft bends and fails)in about 10 mins, no dampening one that happens, 144 shocks are so much better!
what did you do about the drift steering, on mine the steering thing is not solid and wont drive straight.
Yeah I think the whole steering assembly isn't quite right but you can fix it a little with a high quality servo, my got to brand if I'm trying to get better steering is ALWAYS Hitec, amazing servos!
A gyro may help you aswell if you don't mind use them, I dont😅
Hope that helps👍
Very good video, I'm from Brazil and here people use a tamiya brushed motor that we call a can and I have this doubt if I can keep up with the TT01 and TT02 with this HSP 94123 with the same motor and ESC configuration and without much aluminum upgrade so as not to weigh more on the car and use those articulated CVD's that greatly improve clearances, right? can you answer me if it is possible to walk together with the tamiyas with a certain equality? grateful for the attention and keep making quality content.🎉
Thanks Andrew!
So it may just be a slight language barrier thing but I'm not sure if I understand correctly.
Do you mean using the HSP chassis but with the brushed motor your talking about?
If so I think you would probably be closely matching to a TT.
But I can't give any real answers because I've never had a TT so I can't honestly compare them.
@@rccrazy muito obrigado 🙏🤙
Do you have link for the motor and esc? I bought the mod gearing but unfortunately wouldn't fit to a kv 3600-4200 motor I have since it was too small
I got mine from ebay Australia but I haven't been able to find them for a while now.
Any motor should fit just depends what size bore the pinion is, if it 5mm bore you need a motor with a 5mm shaft.
Always check specs if possible.
If you got similar size gearing to mine then anything 2000 to 3000kv is 👍
@@rccrazy what about a kv4200? what pinion gear should it be instead of the m1 that you have got? my motor is the surpass hobby one
There are possibly 100s of surpass motors but the stock gears are M0.6 from memory.
But 4200kv with just the stock gearing will be quite fast even on 2s I think.
There is a gear set for these cars, 3 or 4 pinions and spur in a pack👇
www.ebay.com.au/itm/373568358167?hash=item56fa68c717:g:fu0AAOSwzeJgkmhj
Just remember if your motor does NOT have a 5mm shaft it will be 3.175mm.
Hey bro what diff oil weight would you recommend on this chassis for speed runs?. My setup is 6000kv motor, Mod1 26t pinion, Mod1 29t spur, 2s-3s lipo but before i can run that i need to change the oil thanks in advance. loving the builds video bro keep em coming.
Hey john,
I'm not super knowledgeable with how exactly diffs and shocks should be set-up, just trial and error.
For speed I would probably go 90k in the front and 50k rear, quite thick for that car but it should help with stability and straight line tracking.
If it does not feel right for you try dropping the weight in both diffs by 10-20k, 70k front 30k rear.
Good luck mate🤘
@@rccrazy Appreciate the information mate going to give that a try.
Also to mention you know the Traxxas 6492 29T pinion you used as the spur, could you tell me how you attached that as the original spur has a cut out/grove for the pin to sit in the gear as it goes onto the diff shaft but the Traxxas does not.
Thank you mate 👊
Not a problem at all mate!
The traxxas pinion in held on by the grub screw, I didn't bother about it but you can file a tiny shallow flat spot where the grub screw will sit, prevents it from spinning on the shaft if the grub comes loose.
Thank you very much fella.
Nice vid ... what wheels you have on that ?
Thanks👍
The wheels are just ebay specials, they don't like 3s so 4s will destroy them😄
I got my eye on some protoform wheels though.
@@rccrazy ah gotta love the ebay specials .... i have one also and run it on 3s and it tears the wheels up ... looking for something more capable and solid
Thanks for the reply
If you have any in mind I can get them to test out if your sceptical
@@rccrazy all good man
But if you do find a decent set please post up where to get them
Cheers
Not a problem, I always try and put the links of new products in the description if I remember😆👍
Yo bro ik this vid is old but we're did u get the spur gear from to b able 2 run the mod 1 gear
Hey mate, so these have a 5mm centre shaft and most large mod1 pinions have a 5mm bore/hole, you literally just grub screw the pinion to the centre shaft once the stock spur is removed.
Mod1 pinions available everywhere👌
I have one myself but I have steering issues. It slightly drafts into to direction that I was steering when I go back to cental. Already checked Servo and the horn itself is always back to center but the wheels seem to have some play in them. Anyone having the issue aswell and know what part to replace or fix? I assume the servosafer but not sure.
Mine is the same even after changing the saver, tightening the saver made mine worse actually and a monster servo didn't fix it either.
It is a very common problem with these hsp cars both on and off-road but you just don't notice off-road.
@@rccrazy but is there no solution? Or at least the knowledge what exactly is the cause
@Flaffi78 not that I know of sorry, I would not have a clue what the actual problem is.
Great video and Awesome motor and gear mods. Could you send me a link to the Mod1 spur gear that your using? I haven't been able to find a Mod1 spur gear that was interchangeable with the setup of the original steel one. I need to change to Mod1 gearing because I keep destroying my Mod0.6 pinions running on 4s and i haven't been able to find any alternatives. Cheers
Thanks mate👍
I can give you the link but I get all my stuff locally as in Australian sellers so it will be a OZ link, sorry🙏
Alternatively you can use whatever size because you need to change the spur to mod1 anyway (mod1 with 5mm bore for the centre shaft)
29t for the spur and a 20t pinion I would start with depending on the motor kv's.
If you run under 2500kv or so on 4s then you could go bigger pinions I'd say👍
Let me know if you still want to link.
@@rccrazy yeah a link to the spur gear would be great thanks. I'm in Victoria, so buying local/Australian is no issue for me as I try to buy as mush as possible from us Ozzie's
Excellent!
Well I can't find the Traxxas 29t pinion I used for a spur🤔 but this is almost identical
hobbiesdirect.com.au/Yeah-Racing-29T-1Mod-Hardened-Steel-Pinion-Gear-w-Grub-Screw-MG-10019
If you look at Hobbies Direct you'll find many, just make sure to get the 5mm shaft versions if your using them as a spur gear👍
@@rccrazy oh ok. Did you have to cut a slot for the pin that's on that shaft so it locks into the gear?
Nah mate, pinions have a grub screw!
You remove the original spur aswell as the pin, put the new pinion on the shaft and do up the grub screw.
Exactly the same as if you were securing it to a motor shaft.
Good job mate keep it up!that's sexy!what is the spur you using?are you located in Victoria?
Thanks mate👍
I think the spur in that vid is the mod1 30t traxxas pinion, the centre shaft is 5mm so any pinion with 5mm bore is compatible👌
And yeah im in Melbourne.
Cool bro I m looking to make find a mod 1 setup for my vantage!I would like to join you or meet you sometime if you live around western suburbs!keep wrenching mate!👍👍
That would be ok, the only thing is I can't get out much due to medical issues and this covid stuff still🤦
But if you want hit me up on messenger (Saul Aldridge) and we can organise something.
Esc ??
Hello what size pinion are you using
20t pinion as stated in the video
Spur pinion how much t?
From memory it's 29t spur and 20t pinion
80 A . 60A 🤷♂️🤷♂️🤷♂️???
It's a 120A 6s
@@rccrazy niceeeeee