Hey brother I really enjoyed the video and I’m doing a engine swap on a 2008 pilot from the top also I learned a lot this is my first time so I don’t want to make any mistakes please keep doing the videos and don’t pay any attention to negative comments on your English it’s hard work doing mechanical work as well as learning a different language it shows your intelligence look forward to more of your videos god bless you brother
Great video and my grandson has been watching this so he can replace his grandmother's engine. He is a mechanic but he is young. I even got a lot out of this. Thanks
All Tsab, just came across this video and, although you created this a few years ago, had to comment after hearing your comments at the end of the video. I truly appreciate the work that you've done to record your videos. I obviously watched this one and the other one that you did earlier on a white Honda Pilot replacing the same model engine. (I have a 2007 Honda Odyssey on which I may have to replace the rear main seal and watched these videos to see how to take the engine out from the top as I don't have a lift but do have an engine hoist). ALSO, I watched the videos that you did to replace the engine from the top on the eight generation Honda Civic because I did actually need to replace an engine on one of those due to the infamous block crack/water leak. Your Civic videos helped to give me confidence that I could replace it...and I successfully did it! In the future, please ignore any of the negative comments from those who say that they can't understand what you're saying because your videos are valuable resources and, in my opinion, your English is good enough that anyone who really wants to understand you will. I continue to be impressed at you and others who produce these videos because of the time that is required to do so. I don't think most TH-cam viewers realize what is involved in making these. Thanks again.
I seen a lot of do it yourself videos and they don’t give many explanations of who what they be doing the job. You give explanations and instructions pretty good on how and why you doing it. Good job man!
Really enjoyed the video. Getting ready to do this on a 2004 Honda Pilot, and don't have the means to pull the engine from the bottom (no hoist), so this really helps me out.
Brother you did awesome! Never-mind peoples comments that are ridiculous ….your understood perfectly and hope ive got a mechanic thats honest to help with my 2003 Pilot engine. Great job
good bro, you speak very well and your work very thorough. The first time I exchanged an engine on an Acura MDX, almost all of my information came from you. Once again, excellent video and well spoken.
Great video! You're a super nice guy and right on the money with your attitude. God bless you and I wish you much happiness and success. My 2003 Pilot has 385k and still going strong but a sparkplug broke off in the head so I'm thinking a JDM engine swap instead of repair of head. Shame because I wanted to get 500k out of original motor. Take care of these motors and they will take care of you. Cheers!
My project is coming along. Next up is the rear motor mount. When you pulled the motor do you remember if you left that rear motor mount attached to the engine (the through bolt)? If there's enough clearance to pull it while leaving that attached that will be easier than getting that side bolt out. The 3 bolts you showed I think I can get out which will allow it to be removed from frame. Thank you
I just bought a 2003 pilot and I need to remove the alternator but I have broken tensioner so I need to figure out how to pull it off. Great video thanks for your help!!
One of the 2009 pilot broke just like your lucky it not super tight I be able to hit with a tip of chessel and turn loose. Try like that to see that work for you. The way it hit is hit the side it turn loose slowly tap the broken stud to turn hopefully not so tight for you.
Im planning to replace the engine of my 2006 honda exl pilot when its time. Do you think its cheaper rather than buying a second hand car? I like my pilot, it didn't give me headache the past 15 years.
Great video! Trying to decide whether to replace my ‘08 pilot engine or replace the pilot. There is coolant in the cylinder. Could be a head gasket, could be a cracked engine block. The head gasket only has 10K miles on it, so that seems unlikely. Not sure what I’m gonna do yet but enjoyed the video.
you are correct about used engines....unless you really trust the depiction by the seller of what the engine is and how it runs you are taking major risks, often times the labor is worth more than the engine......so be careful and try to always hear it run before you buy it.
Wow!!.. not sure how i missed this video. Thank you buddy. I recently changed my Toytoa Camry engine and went thru lot challenges while aligning the engine to transmmission while installing it back. questions. 1. when i drop engine back to transmission. i can title the engine to left to right using engine leveller but i dont know how i can move the engine little to the back on bottom and liittle to the front on top, inn otherwords i dont see a way to tilt the engine on front and bottom because the engine leveller can tilt only left to right. can you pls provide me some tips.
Awesome job.. I am doing in the shop with hoist and air tools so it's easier ( but that is a big job) I feel your pain for doing it on the floor, that's hard bro.. Nice video
Hey Brother, Great content. You make it look so easy, but you cut out all of the cussings, dropping tools, looking all over the place for missing parts, and blessing the other guy's mother for his Mickey Mouse job. I am considering buying an 03 Pilot right now, but now that I know I can change the engine in 30 mins, I am messaging the seller now.
I have a 2008 pilot. it is needing an engine and transmission. Just curious how many hours it took you to do the engine swap? Can I pull both the engine and transmission out together? How much more work is it to pull them out together? THanks! Really appreciate the video!
For me it take 3 days. Yes you can take both out at the same time. In my other video the wide body pilot I took both out at the same time it's very easy.
Is there much of any difference in procedure between the second generation video that you did pulling both the transmission and engine out together versus the first generation?
That was a great clean project congratulations I felt so happy at first started. I have a 04 pilot and have the VTM and abs light on but have no idea how to fix it, any advice? Please let me know and thank you for the video I enjoyed it a lot
Hi! How far are you from Jackson Mississippi? I have a 2003 Honda and have been thinking of replacing the old engine for a new one. I’ve been very happy with this car. All the recalls have been followed but would like a newer engine without the cost of a new Pilot. Don’t have the money like I used to when younger
i am going to do mine this week. did you do water pump and timing belt while it was out? i also did not see in video when you reconnected the torque converter to flywheel. did you miss that in video?
Do you have some clips of putting the battery and some of the wiring harness back together? This video was great help for me as I am doing the first generation pilot right now and it was outstanding!
the wiring harness back where the battery is. I have about 4-5 plugs that I am not exactly sure where i took them off of. Just was wondering if you had some of those clips yet?
Hey brother I’m looking at your content again because I mess up my engine trying to do a timing kit swap and I must have skipped a tooth so I must purchase another engine but I would like to replace the timing belt on replacement engine before I install it I’m wondering would you know where I can purchase a cam locking tool for my 3.5 engine that his would be really helpful I’m afraid of ruining my new engine if I don’t lock the cams thanks in advance brother
Hi,, greetings from Canada.. love ur videos and real life mechanic no BS.. i have aquestion on removing engine on honda crv2008 is it possible to remove just the motor ? Pull over the top .. thanks !!
hey, thank you , my question is where do u live, i live in orlando , my honda pilot was flooding and i need replace engine , could you replace for me i will pay for you.Thank you
Well done sir. You communicate very well. I am about to do this to my 2006 Honda Ridgeline. I think it would be very similar to the pilot. I am swapping the engine and transmission at the same time. My honda is 4 wheel drive. Thank you so much for the video. Subscribed.
All Tsab, Have you experienced an issues since replacing the welds with bolts? Did you put anything between the pieces when you bolted them back together? Body filler perhaps? I have an 05 Pilot that I need to replace the engine, so I'm contemplating using this method.
Those bolts just put washer nothing else.. if you know how to weld recommend cut then weld it back that will save you a lot time. No need body filler just paint it.. To drill those spot welds is take a lot time and you will burn many drill bit. Please help me subscribe so we can keep in touch if you need more help ok buddy. Have fun 👍
@@alltsab Thanks. I'm going to try cutting the spot welds out with a Blair spot weld cutter. I will remove the front fenders to get clear access. If it works, I have a friend that can 'plug weld' the pieces back together. I'll let you know how it turns out. Thank you for making this video. Your method is going to make this job possible.
Great work. My pilot is having misfire and too rich code even after I replace the spark plugs, coil ignitions, fuel injectors, oxygen sensor and air flow tube. No overheat and compression is good. Crossing my finger is just the engine blown head gasket that cost the air leak between cylinders.
Did you check coolant level? Same problem with my 06 pilot but water pump is leaking and my daughter drove it didn't check the coolant and ran it hot and now it's smoking really bad with misfire codes cylinders have either coolant or oil leaking on them, I'm still undecided weather do head gaskets or swap engines...
I have a 06 with bad head gasket I'm having hard time deciding on gasket replacement or swap engines... And you make it looks not so bad doing a swap, pulling the front support off and having to cut and weld it back is where I'm hitting a wall. Appreciate your videos
Do you have any videos of disconnecting from the engine to the transmission? I can not find the 5 or 6 attached bolts. Does anyone know or have a clear video of it?
I know this sounds crazy but would it be possible to swap the engine on a Pilot with one of those German diesel engines like Mercedes 320CDI or BMW 3.0D. I have no idea how engine swaps works lol just wondering.
i need help. 2005 honda pilot. screwed up and lost the timing alignment when replacing the timing belt. I now have lined all the marks up and put the new belt on. but how do I make sure it is not 108 degrees off????
I liked and subscribed! Awesome video! I'm from Germany, so I know what you mean about language. I have a 2005 Honda Pilot so I might have questions, soon :)
I had my engine replaced and the mechanic swapped the computer, after a while he could never get it to start. Now it just clicks and locks the key, what can it be?
Is this similar to a 2006 Ridgeline? Just trying to get an idea of hours involved, my TB broke on 2006 Ridgeline (TB only 2.5 years old with 14k miles). Looking at a JDM engine, any advice? Thanks
@@Backin48 not sure how many hours because I take video and work so I will say if I doing the work without film it probably it take out 3 or 4 hours only.
![[Full] 4 ต่อ 4 Celebrity EP.920 | 3 พ.ย. 67 | one31](http://i.ytimg.com/vi/KwiW2M_kAg4/mqdefault.jpg)
Hey brother I really enjoyed the video and I’m doing a engine swap on a 2008 pilot from the top also I learned a lot this is my first time so I don’t want to make any mistakes please keep doing the videos and don’t pay any attention to negative comments on your English it’s hard work doing mechanical work as well as learning a different language it shows your intelligence look forward to more of your videos god bless you brother
Great video and my grandson has been watching this so he can replace his grandmother's engine. He is a mechanic but he is young. I even got a lot out of this. Thanks
Thank you for watching please don't forget to help subscribe to my channel I need your help go get my channel going.
All Tsab, just came across this video and, although you created this a few years ago, had to comment after hearing your comments at the end of the video.
I truly appreciate the work that you've done to record your videos. I obviously watched this one and the other one that you did earlier on a white Honda Pilot replacing the same model engine. (I have a 2007 Honda Odyssey on which I may have to replace the rear main seal and watched these videos to see how to take the engine out from the top as I don't have a lift but do have an engine hoist).
ALSO, I watched the videos that you did to replace the engine from the top on the eight generation Honda Civic because I did actually need to replace an engine on one of those due to the infamous block crack/water leak. Your Civic videos helped to give me confidence that I could replace it...and I successfully did it!
In the future, please ignore any of the negative comments from those who say that they can't understand what you're saying because your videos are valuable resources and, in my opinion, your English is good enough that anyone who really wants to understand you will.
I continue to be impressed at you and others who produce these videos because of the time that is required to do so. I don't think most TH-cam viewers realize what is involved in making these.
Thanks again.
Thank you so much for your support me very appreciated it. God bless you 🙏 ❤️
I am getting ready to do this on a 2005 pilot and this video was exactly what I needed to see. Thank you for the upload.
Uwelcome have fun...dont forget to help subscribe thanks
I seen a lot of do it yourself videos and they don’t give many explanations of who what they be doing the job. You give explanations and instructions pretty good on how and why you doing it. Good job man!
Thank you 😊
Really enjoyed the video. Getting ready to do this on a 2004 Honda Pilot, and don't have the means to pull the engine from the bottom (no hoist), so this really helps me out.
Good video! Love my 2007 Pilot. 180K and still going strong.
My 2006 exl Pilot is 200k and running great. Love the Pilot its gen. I have 2019 exl as well being used by wife, and she is loving it.
Brother you did awesome! Never-mind peoples comments that are ridiculous ….your understood perfectly and hope ive got a mechanic thats honest to help with my 2003 Pilot engine. Great job
Thanks brother 🙏
@@alltsab yessir… you got it… stay blessed!!!
good bro, you speak very well and your work very thorough. The first time I exchanged an engine on an Acura MDX, almost all of my information came from you. Once again, excellent video and well spoken.
Thank you very much my friend very appreciated 😊
My friend you are great thank you for your work I can understand you perfectly.
Exactly I have been dealing with this for the last 8 years. Especially cars that people buy from auction.
Wow 8 yrs
Great video! You're a super nice guy and right on the money with your attitude. God bless you and I wish you much happiness and success. My 2003 Pilot has 385k and still going strong but a sparkplug broke off in the head so I'm thinking a JDM engine swap instead of repair of head. Shame because I wanted to get 500k out of original motor. Take care of these motors and they will take care of you. Cheers!
Thank you cheer
My project is coming along. Next up is the rear motor mount. When you pulled the motor do you remember if you left that rear motor mount attached to the engine (the through bolt)? If there's enough clearance to pull it while leaving that attached that will be easier than getting that side bolt out. The 3 bolts you showed I think I can get out which will allow it to be removed from frame. Thank you
No the motor mount stay with the subframe
@@alltsab ok. So I only need to remove the through bolt. Leave the mount bolted in.
@@MC-qg5nu yes
I just bought a 2003 pilot and I need to remove the alternator but I have broken tensioner so I need to figure out how to pull it off. Great video thanks for your help!!
One of the 2009 pilot broke just like your lucky it not super tight I be able to hit with a tip of chessel and turn loose. Try like that to see that work for you. The way it hit is hit the side it turn loose slowly tap the broken stud to turn hopefully not so tight for you.
I'm getting ready to swap out a 05 mdx your video helped me so much. Keep it up my guy.
That's awesome thanks buddy
Great job. You are professional. Though I do not want to do this job, but I have enjoyed .
Im planning to replace the engine of my 2006 honda exl pilot when its time. Do you think its cheaper rather than buying a second hand car? I like my pilot, it didn't give me headache the past 15 years.
how many hours to pull and replace the engine on average? ballpark estimate that you charge on the labor?
Great video! Trying to decide whether to replace my ‘08 pilot engine or replace the pilot.
There is coolant in the cylinder. Could be a head gasket, could be a cracked engine block. The head gasket only has 10K miles on it, so that seems unlikely.
Not sure what I’m gonna do yet but enjoyed the video.
Thanks buddy
This is super helpful. Thankyou for your skills and your language is completely acceptable. You are an inspiration to me.
Thank you my friend
you are correct about used engines....unless you really trust the depiction by the seller of what the engine is and how it runs you are taking major risks, often times the labor is worth more than the engine......so be careful and try to always hear it run before you buy it.
Great job buddy. Question, if I want to remove engine and trans as a whole, do I have to remove the axle and transfer case for the AWD?
Yes you have to remove it.
Wow!!.. not sure how i missed this video. Thank you buddy. I recently changed my Toytoa Camry engine and went thru lot challenges while aligning the engine to transmmission while installing it back.
questions.
1. when i drop engine back to transmission. i can title the engine to left to right using engine leveller but i dont know how i can move the engine little to the back on bottom and liittle to the front on top, inn otherwords i dont see a way to tilt the engine on front and bottom because the engine leveller can tilt only left to right.
can you pls provide me some tips.
Awesome job.. I am doing in the shop with hoist and air tools so it's easier ( but that is a big job) I feel your pain for doing it on the floor, that's hard bro.. Nice video
Thank you
Love you guy. Thank you for this very informative video.
Hey Brother, Great content. You make it look so easy, but you cut out all of the cussings, dropping tools, looking all over the place for missing parts, and blessing the other guy's mother for his Mickey Mouse job. I am considering buying an 03 Pilot right now, but now that I know I can change the engine in 30 mins, I am messaging the seller now.
Good luck buddy
Thank you for the tips and video, I'll be doing this soon in MN.
Get start before freezing coming buddy
Very good video friend, question you don't have to drain transmission fluid? When removing an engine?
Yes
Love my 2004 pilot with 249k and original engine and transmission
Nice
Amazing job, your command of English is very good.
@joycebowen8753 thank you
Thanks for all information how to install the engine. God bless you I enjoy to watch the video to the end.
Thank you for your support 🙏
I have a 2008 pilot. it is needing an engine and transmission. Just curious how many hours it took you to do the engine swap? Can I pull both the engine and transmission out together? How much more work is it to pull them out together? THanks!
Really appreciate the video!
For me it take 3 days. Yes you can take both out at the same time. In my other video the wide body pilot I took both out at the same time it's very easy.
Is there much of any difference in procedure between the second generation video that you did pulling both the transmission and engine out together versus the first generation?
@@michaelmiller85 not much different I will say it the same process. In your case pull all together is much easier.
Great job, thank you
My friend actually I understood everything thanks cause my project is my pilot, I needed this video
Thanks buddy
This dude rocks, keep wrenching my friend 👍
Thanks
That was a great clean project congratulations I felt so happy at first started. I have a 04 pilot and have the VTM and abs light on but have no idea how to fix it, any advice? Please let me know and thank you for the video I enjoyed it a lot
Hi! How far are you from Jackson Mississippi? I have a 2003 Honda and have been thinking of replacing the old engine for a new one. I’ve been very happy with this car. All the recalls have been followed but would like a newer engine without the cost of a new Pilot. Don’t have the money like I used to when younger
Almost cross country
i am going to do mine this week. did you do water pump and timing belt while it was out? i also did not see in video when you reconnected the torque converter to flywheel. did you miss that in video?
Yes I did put new timing belt and water pump
Hi there, I like the way you finished someone else work. Very nice job. What is typical cost engine swapping? An average?
I did for friends and family so not evry much but shop probably charge over thousands
God bless you u are a great help
This video it’s going to help me out a lot
I really enjoy this video
Thanks buddy hope you subscribe to my channel ok
Do you have some clips of putting the battery and some of the wiring harness back together? This video was great help for me as I am doing the first generation pilot right now and it was outstanding!
the wiring harness back where the battery is. I have about 4-5 plugs that I am not exactly sure where i took them off of. Just was wondering if you had some of those clips yet?
@aidaneifert3130 i may delete the raw video clips but everything it go only one way. Plug are only fit where it belong to .
I really appreciate your video. Did you consider pulling the transmission with the motor?
Yes you could
@@alltsab I am just trying to figure out if it would be easier when doing a engine swap.
@@rbuggs3658 either way almost the same amount of work bro
Nice but that's a fwd right..because awd is impossible to remove from the top the whole k frame has to be drop underneath
Yes this is Awd...
If you want false confidence, this video is for you. This is much more difficult doing it for the first time in real life.
Hey real nice job you did.
Thank you for taking the time to help us. Keep up the good work.
Thanks buddy for appreciated my work
Hello sir. Thank You for your videos. I have to do change my wife's 2008 Odyssey motor. Do you have any video for the Odyssey? Maybe some new ideas?
Should be almost the same as honda pilot.
Nice work man
Hey brother I’m looking at your content again because I mess up my engine trying to do a timing kit swap and I must have skipped a tooth so I must purchase another engine but I would like to replace the timing belt on replacement engine before I install it I’m wondering would you know where I can purchase a cam locking tool for my 3.5 engine that his would be really helpful I’m afraid of ruining my new engine if I don’t lock the cams thanks in advance brother
You can find it in ebay or Amazon also your local auto part store should have it.
Hi,, greetings from Canada.. love ur videos and real life mechanic no BS.. i have aquestion on removing engine on honda crv2008 is it possible to remove just the motor ? Pull over the top .. thanks !!
Yes you can do it from the top and engine only . Please help me subscribe 🙏 ok
you are awesome for sharing.
Just had my 2004 Honda Pilot engine shit out! I have 0 car experience but I’m going to pay two buddies to do the work and I’ll watch 😂
That's good so next time you can do it yourself lol 😆 💪 😉
Are there bolts for the torque converter? I didn’t see in the video you mess with them. Thanks!
Yes
I have 2003 as first owner. It had 175k . When need I replace the timing belt for it. Last time replaced about ten years ago
About time to do it again
@@alltsab thanks bro.
My respect man....
I like your work that you have done
Thanks buddy 😊
Man you did great on this job 👍
hey, thank you , my question is where do u live, i live in orlando , my honda pilot was flooding and i need replace engine , could you replace for me i will pay for you.Thank you
This was a lot of help. Your awesome 😎
@@jonathannunez2642 thank 😊
Well done sir. You communicate very well. I am about to do this to my 2006 Honda Ridgeline. I think it would be very similar to the pilot. I am swapping the engine and transmission at the same time. My honda is 4 wheel drive. Thank you so much for the video. Subscribed.
You welcome and thank you for the support subscribe to my channel
@@alltsab subscribed. My Ridgeline is 4x4. Do you see any problems with that?
@@eljeef57 no problem but if the transfer case is on it way out you may have to disable it. If not it should be easy out
@@alltsab do you mean "the transfer case is in the way" or did you mean "it's on the way out - meaning the transfer case is almost broken"?
@@eljeef57 transfer case in it way
Brother, where are you at? How much roughly an engine replacement cost for a 2010 Honda pilot? Thanks
I like how you do it I want to go in the mechanic business construction is too bad. I have carpentry business
I can't believe someone would hack off the whole front end instead of dropping it out the bottom I guess it's because of no access to lift
Wonderful video! Do you think an 04 Honda Pilot engine can be put it an 06 Honda Pilot?
I will say yes.
Yes same gen engine
Hi I swap motor on 2007 I used motor 2006 vtch and my Honda pilot it's I VTech it's the same anything can erase check engine light?
All Tsab, Have you experienced an issues since replacing the welds with bolts? Did you put anything between the pieces when you bolted them back together? Body filler perhaps? I have an 05 Pilot that I need to replace the engine, so I'm contemplating using this method.
Those bolts just put washer nothing else.. if you know how to weld recommend cut then weld it back that will save you a lot time. No need body filler just paint it.. To drill those spot welds is take a lot time and you will burn many drill bit. Please help me subscribe so we can keep in touch if you need more help ok buddy. Have fun 👍
@@alltsab Thanks. I'm going to try cutting the spot welds out with a Blair spot weld cutter. I will remove the front fenders to get clear access. If it works, I have a friend that can 'plug weld' the pieces back together. I'll let you know how it turns out. Thank you for making this video. Your method is going to make this job possible.
@@flbartlett that is good and it will cut a lot of work out.
And what is your opinion on JDM engines, can I go ahead and use it or I will have issues like codes for emission , etc..?
Good job
they dont finish the job if customer decide to not paying i guess cause i dont see any other reason to be doing that
How long time take to do tha job.?
How did you separate the trans axle from the motor like where it mounts
Can we install honda pilot engine 2016 into honda pilot 2010
Thanks man
Thank you ✌🏾
Nyob zoo os kwv tij!
You can drop the engine from the bottom if you can lift the car high enough.
Yes but I don't have tall jackstand to do it.
Very helpful thank you
Great work. My pilot is having misfire and too rich code even after I replace the spark plugs, coil ignitions, fuel injectors, oxygen sensor and air flow tube. No overheat and compression is good. Crossing my finger is just the engine blown head gasket that cost the air leak between cylinders.
Wow sorry to hear that you spend that much money for everything and didn't solve the problems.
Did you check coolant level? Same problem with my 06 pilot but water pump is leaking and my daughter drove it didn't check the coolant and ran it hot and now it's smoking really bad with misfire codes cylinders have either coolant or oil leaking on them, I'm still undecided weather do head gaskets or swap engines...
I have a 06 with bad head gasket I'm having hard time deciding on gasket replacement or swap engines... And you make it looks not so bad doing a swap, pulling the front support off and having to cut and weld it back is where I'm hitting a wall. Appreciate your videos
@@tyflesh this one has no compression due to lacking of oil services.
@@tyflesh better is head gasket replacement. If head not cracked. Engine is over 1k. Replace gasket cost 500 or less if you do it yourself.
Hey uncle,
When you remove just the engine, both axles do not need to be remove, right?
Correct
@@alltsab thankyou uncle
IS IT EASIER TO REMOVE ENGINE AND TRANSMISSION 2GETHER ,THEN JUST PUT TRANSMISSION SWAP TO NEW ENGINE???
Yes
Is it possible to replace the engine from the bottom without cutting the cross bar from the top?
Yes if you have lift or high jack stands.
Amazing work !!
Hi my 2008 Honda pilot was knocking due to low oil now it won’t start does it need a new engine or just a new head it still crank just won’t start
Your crankshaft bearing could be worn out already. Your head not the problem.
Thanks for this video. It helped me.
You welcome
did you replace water pump send timing belt?
Yes i did put new timing belt and water
Do you have any videos of disconnecting from the engine to the transmission? I can not find the 5 or 6 attached bolts. Does anyone know or have a clear video of it?
Look on my second generation pilot engine replacement or 2010 pilot engine replacement
I’m mid pull and have all bell housing bolts loose and everything else and it’s gapped like 1 an inch and a half and I can’t get it apart
Did you unbolts all torque converter bolts from the flext plate yet? Sound like still stuck with torque converter.
I know this sounds crazy but would it be possible to swap the engine on a Pilot with one of those German diesel engines like Mercedes 320CDI or BMW 3.0D. I have no idea how engine swaps works lol just wondering.
Any is possible. Human can made anything now day.
i need help. 2005 honda pilot. screwed up and lost the timing alignment when replacing the timing belt. I now have lined all the marks up and put the new belt on. but how do I make sure it is not 108 degrees off????
I have video for honda timing belt replacement check on that
@@alltsab i cant find them. Please send link.
@@stso9daa th-cam.com/video/Tg9dZGUZroU/w-d-xo.html
Nice job I would give you more likes if I could
Thank you
Hey I need help i have a 03 pilot with 277 miles i need a swap how can i contact you. Im in fresno ca
How did you organize all the bolts and parts you removed?
Very easy because honda only have a few nuts and bolts only. 10, 12, 14, 17, and 19mm so it can't go wrong.
@@alltsab thanks!
@@alltsabhow many hours did it take you to remove?
@@manicmandownup 6
Did you have to undo any flywheel bolts
Torque converter bolts
@@alltsabwhere the best access them
How much is the labor for chance the engine
Case of beer for but honda may charge legs and arms
Grate job
good shit brother
I liked and subscribed! Awesome video! I'm from Germany, so I know what you mean about language. I have a 2005 Honda Pilot so I might have questions, soon :)
Thank you for your generous support subscribe. Yes if you need help just ask I will do my best to help you.
I had my engine replaced and the mechanic swapped the computer, after a while he could never get it to start. Now it just clicks and locks the key, what can it be?
Swap ecu probably need to reprogram the key. Maybe the ecu is different
Is this similar to a 2006 Ridgeline? Just trying to get an idea of hours involved, my TB broke on 2006 Ridgeline (TB only 2.5 years old with 14k miles). Looking at a JDM engine, any advice? Thanks
Yes engine is very much the same one.
@@alltsab About how many hours to remove and replace the engine? Thanks for your help. Brad
@@Backin48 not sure how many hours because I take video and work so I will say if I doing the work without film it probably it take out 3 or 4 hours only.
@@alltsab thanks
Where are you located friend ?
Sweet video thanks you sir!!!!
You welcome buddy
Where are you located ? What state?