I recommend this guy for replacement ribbon cables The only recommendation I would make is to buy the speedo LCD display with the ribbon cable already attached. It's a nightmare to align the ribbon cable on the LCD manually. This guy is a pro and makes it look too easy ;)
OMG.... You Rock!! I would have spent a month messing with that had I not stumbled upon your vid. Thank you so much. Do you have any advise on changing the speedo reading to what the old dash module had?
I had the same problem with my E39. In my case it was caused bad connection of speed sensor wire where it goes into ABS unit. Previous owner damaged connector, so I had to get second hand one from eBay and resolder it. Works fine since.
This is not for the E38. The panel doesn't go off that way For the E38 you only have to take out the two screws above the cluster. Then pull out from the top with a plastic took
This guy is very good & keeps everything basic & to the point.. Bravo!! Good job!!!!
I recommend this guy for replacement ribbon cables The only recommendation I would make is to buy the speedo LCD display with the ribbon cable already attached. It's a nightmare to align the ribbon cable on the LCD manually. This guy is a pro and makes it look too easy ;)
Looks much easier than I anticipated. Thanks for the clear instructions.
OMG.... You Rock!! I would have spent a month messing with that had I not stumbled upon your vid. Thank you so much. Do you have any advise on changing the speedo reading to what the old dash module had?
I had the same problem with my E39. In my case it was caused bad connection of speed sensor wire where it goes into ABS unit. Previous owner damaged connector, so I had to get second hand one from eBay and resolder it. Works fine since.
Great and simple. Do you know official part number of the ribbon connector for mid panel and for cluster board?
Well there is no officeial part number, but you may find it on the web as
254-001 MID ribbon cable
254-003 speedo ribbon cable
Thank you!
Do you recommend desconnecting the battery ?
Great video !
My low coolant light burnt out. Would it be hard to put in another bulb or something? Please reply.
Super filmik, teraz to sama wymienię sobie licznik 😍
Thanks! :) Good luck!
My 1996 E28i doesn't have adjustable steering. What do I do? Thanks
A very smooth process, well explained. Thank you !
Thank you so much!!! Didn't think it was that simple..
am having light switch issues,it remanins on even when the car is off.and somehow the hazard button remains on too
very helpful, thank you!
Nicely presented, thanks it was very helpful.
This is not for the E38. The panel doesn't go off that way
For the E38 you only have to take out the two screws above the cluster. Then pull out from the top with a plastic took
very well done
Good video, thanks!
fantastic video
thank you ...short and sweet........
thank you. very helpful and easy...
very helpful. thank you
thanks , very smooth and neet,thumbs up
Thanks, very useful video!
Thnx!!!!
You're welcome! :)
328i, not E28i, sorry
Well Done
thx for the vid
thanks bro
great just what i needed to know
.. you ever need a hand with organic chemistry!!
Great tutorial. Thanks.