How to make high-quality hand thread tap(don't forget the like)
ฝัง
- เผยแพร่เมื่อ 14 ก.ค. 2023
- Broken and disposable tools are always usable and functional and will only require a little innovation and creativity
The best way to make hand thread tap: • The best way to make h...
How to make a handmade drill bit: • How to make a handmade...
Great build and very innovative use of a drill bit with spiral flutes. There have been a lot of makers with straight flutes, but I like the spiral, and old bits are fairly easy to come by. Thanks and cheers! Someone should forward this vid to homemade tools.
I'm so glad you enjoyed it my friend🙏👍💐
Делал я со сверла только с конуса на М12шаг 1,75 левый , отлично получилось .
Красавчик ! Чистюля !! Приятно , когда все почти идеально !!! Успехов ❤ , за наждачку и образив минус😢
This video really makes me appreciate just being able to buy one.
🙏🙏💐❤️
Absolute HOCHACHTUNG! Das war der Beweis, daß es noch echte Handwerker gibt! 🎉
🙏🙏🙏💐
Great job my friend!
You left out only one thing, tempering. it is very important that the tool is not brittle, because one wrong move can break the teeth. in the case of tool steels, they undergo multi-step hardening, which makes the material very resistant. great job by the way!
Thanks for the watching and the tips my dear friend🙏🙏💐💐
For tempering steel that needs to stay very hard, like for a tap, sometimes just boiling water is hot enough, and if that leaves it to brittle, an oven at 150 degrees C might work
With no doubt, the very best tap. I know because I made some myself in desperation, on weekends where I need it one and every shop were shut, but the cheapest tap would do the job in good hands.
Thank you so much my dear friend🙏🙏🙏💐
Witaj Fachmanie młody i najwyższy Szacunek od starego zawodowca, super robota!
Dziękuję bardzo mój dobry przyjacielu🙏🙏💐
Very well done.
I keep in mind your way to sharpen a tap drill.
Yes, thanks👍
A handmade tool is always a reason to be proud. Congratulations and best regards 😀.
Exactly, I feel proud everytime I use things that I made or restored
Thank you very much my friend I hope other friends like you will understand the value of this work and not be superficial
🙏🙏❤️👍
Thank you for the like 😀.
Damn fine work! That was some quality stuff. It's also nice to see someone that actually does things correctly and properly when it comes to machining and metal working. Nowadays I see so many people on the interweb TH-cams that cut corners, force things, and sometimes simply just don't know what they are doing. Then they make videos and pass those bad habits on to others 😢. I also appreciate that you know how to correctly grind your own lathe bits which is something that all machinist should at least know how to do whether they use indexable bits or not. That is definitely a dying art. You are quite impressive my good sir, keep up the good work! 👍👏😊
Thank you very much, my good friend, and I will try to offer the best as much as I can🙏🙏💐💐
@@Mastermind- good stuff Maynard
You should note that drill diameter are actually slightly smaller than stated size and tap diameters are slightly larger, so take care for a screw to fit the tapped hole!
Pensa num cara treinado!
Belo trabalho!
Valeu muito obrigado!!!
Muito obrigado meu bom amigo🙏
Bardzo dobra robota!!!
🙏🙏🙏💐
709
Слышишь лях, а в где добрая работа??? Точность + километр -километр. .а цена 1 штуки 1 скудо.
Superb skills and hat off to someone’s that really deserve It.
Thanks my dear friend
Un artista!. Si señor
🙏💐🙏
Good video. I will try this method some time. Cheers Rob
I am very happy my good friend
cheers
Gran Bel Lavoro da professionista e con stile. Complimenti sei Bravissimo.
Grazie mille mio buon amico🙏🙏🙏
Good work. We shared this video on our homemade tools forum this week 😎
Wow, thanks🙏🙏💐💐
super good work !!!
Thanks a lot!🙏🙏💐
Magnificent work.I need to make an m20 nut. I'm going to take advantage of the idea and do it with a 22 inch drill that I have in the workshop ... ( Not inches 22 m/m diameter )
Go for it my friend
Excelente trabalho e muito conhecimento parabéns
obrigado meu amigo🙏👍💐
отличный мастер молодец
🙏🙏💐
very good job,thx!
Glad you liked it!🙏🙏🙏💐
Parabéns pelo trabalho e pela organização e limpeza durante o trabalho.
Obrigado, meu amigo Eu espero que você tenha gostado🙏
Ficou muito bom!! Parabéns
Muito obrigado meu bom amigo
Great job 👍
Thanks for the visit🙏👍
Bro i appreciate how clean you work ! Great job!
Thanks for watching
Thank you very much and I am glad that it was enjoyable for you, my good friend
Bonjour,quel beau travail. Très bien filmé. Mes respects 👍👍👍😉
Merci mon bon ami et je suis si heureux que cela ait été agréable pour toi🙏🙏🙏💐
Bom trabalho que fez com a broca quebrada, parabéns
Obrigado meu bom amigo e fico feliz que tenha gostado
Atelier propre, machines outil propre et enfin un travail effectué dans les règles de l’art. Je respecte et admire les personnes comme vous qui exécute des travaux frisant l’excellence, je remercie ceux qui vous ont transmis leur savoir et je ne doute pas une seconde que à votre tour un jour vous le transmettez à votre tour……
Cordialement
Merci beaucoup mon cher ami et j'apprécie votre point de vue différent et j'espère que vous avez apprécié la vidéo🙏🙏🙏
Genius!! The possibilites are endless!
🙏🙏🙏👍🌹
Well done that man.
Thanks my dear friend👍💐
Very good idea.
Many many thanks🙏💐
Great job really! Only time I got was holding on to the part by hand during the drilling process. 🎉
Worried*
Glad it helped!👍
Exelente me gusto la idea grasias por compartir
Muchas gracias mi buen amigo y me alegro mucho que te haya gustado🙏💐
Hello, have a good time, don't be tired, thank you for your good video, it was very good
Thank you! You too!
سپاسگزارم سانازگل
Nam știut ca din burghiu poate sa facă asa ceva tarod bravo meseriasule
multumesc prietene
круто , но уж очень заморочено . 👍
Sangat menakjubkan kawan.
Hand trhead yang mantap
terima kasih kawan🙏🙏💐
Complimenti!!! bellissimo e perfetto lavoro👍👋 Un saluto da Roma
Grazie e sono molto felice e onorato che ti sia piaciuto, mio buon amico🙏🙏🙏👍❤️
Super jest to pomysł pozdrawiam serdecznie 👍👍👍👍🏻
Dziękuję mój dobry przyjacielu i bardzo się cieszę, że Ci się podobało🙏💐
Slick! Great video thumbs up.
Thanks for the visit
I'm already subscribe from some previous ridiculous video I watched of yours. Love the innovations!
🙏👍💐
That is my kind of recycling!!
👍👍👍💐
Sorry, not worthwhile at all.
Btw, you should use grinding machine instead of lathe to make thread. HSS steel doesn't need oil as a cooling medium. Liquidifed Corbin dioxide can work.
When you just have many cool machines.))))
And when you have great ideas and machining skills😉
@@Mastermind- Look at @Mehamozg. I'm shure you'll like it.
I saw it and just👏👏👏👏👏
Muito bom excelente parabéns
Muito obrigado meu bom amigo
Nice work
Thanks for the visit🙏🙏💐
GOOD STUFF 👍 THANKYOU
Glad you enjoyed it🙏💐
Grand Travail, bravo 👍
Do I understand correctly that first you release the metal (remove the quench), and then re-quench after processing? Cool work, but for those who have a welding machine or a heating furnace.
You almost guessed right, my friend
Heated and left to cool to a anneal the hardened metal, then after it was quenched in oil that steals some carbon from oil for hardness but it quickly cools the steel to lock in the rearranging molecules.
The old way of screw cutting took skill and a sharp brain, it's scandalous how the salary of a toolmaker or machinest was so average for such a skilled job. Dying breed nowadays
Instead of the Three Jaw Chuck, you should use an ER32 Collet for better grip and concentricity.
buy us all one.
@@assyholey4224 A mí que me compre un macho como ese, ya estoy conforme...
Toll gemacht … !
Danke mein Freund🙏🙏🙏💐
Nice 👍👍🤝 Dear friend so amazing🌹☺
Thank you so much 👍🙏🙏💐
Compla ali na China, balatinho né?😂
Excellent job, congrats.👍👍
merci moninga na ngai👍💐
perfect!!!
🙏🙏🙏💐
хорошо сделал.
It’s amazing
Buen trabajo aunque pensaba, sí, en el costo beneficio. Pero es un trabajo artesanal a costa de ingenio , paciencia y habilidad. Es una satisfacción para el que lo hace. Vaya mis felicitaciones para Master y gracias por compartir conocimientos.
Gracias por tu valioso comentario, mi buen amigo, y me alegra mucho que lo hayas disfrutado.🙏🙏🙏👍❤️
Bellissimo lavoro
Grazie e sono molto felice e orgoglioso di te, mio buon amico
Very Helpful and Informative video 👍✌️❤
Glad it was helpful!🙏🙏🙏👍⚘️
La pregunta es.
Quien tornio las parte del primer torno creado ???
No te pillo
@@Mastermind- ósea quien hizo tornio las partes del primer tornó creado. Si no existia un torno
Very good idea, and better job ... i only ask how much oxygen was used, and how much would be instead cost a commercial tap ... ( of course not to deal with taps that are really "hard to find" on the market ... ).
Note : a test with a blind bore would be much more relevant, as spiral taps are expecially designed for that type of holes ...
Thank you very much in any case for your usefull lesson, i really appreciated both the heat treatments of common drills ...
🙏🙏🙏💐
Excelente trabajo🙏🤗
🙏🙏👍🙏🌹
👍 brilliant!
Many many thanks my dear friend🙏💐
Bravo vrhunski projekat
🙏🙏🙏💐
muy bien para fabricar machos de roscas poco comunes parece una idea genial, para roscas comunes no merece mucho la pena acabo de compara un M11x1 por 4 euros( igual solo hace una rosca pero va a cumplir)
Great teacher.
Glad you think so🙏💐
Muito bom!
obrigado meu amigo🙏
나사 작업후에 탭 열처리 안해도 됩니까?
Nice work piece
Thank you so much🙏👍💐
Adamın dibisin kardeşim 🎉❤
sağ ol, kanka Umarım eğlenmişsindir
@@Mastermind- hem eğlendim hem öğrendim eline sağlık
Just a quick question. Doesnt the reheating blunt the cutting edge of the tap?
I don't think it has any effect, but to be sure, I resharpened the edges after reheating
no, he is now re-heat treating the tap as he annealed it at the start of the video.
Молодец! Работа на высоком уровне. Продолжайте повышать свои навыки.
🙏🙏💐
Резьбу бы резать более полого на конус. Метчик будет так работать успешнее.
Зачем заниматся целы день одним метчиком с очень низкой точностью, хуже китайских из 90х, если он стоит копейки, чисто хайпануть на восторженных дурачках, или если живёшь на северном полюсе в полной автономке.
19:26 why this way? Use drill machine 18:25 for perfect coaxial hole.
Super podoba mi się
Dziękuję, przyjacielu🙏🙏👍💐
OLÁ. Gostei de ver. Acredito que o primeiro aquecimento foi para "temperar" a peça. A sugestão é a de um esfriamento mais lento colocando-a no mesmo recipiente porém envolta de grossa camada de "Carvão MINERAL". No final, a forma como foi feita a "CIMENTAÇÃO" é muito provável que a peça se torne 'QUEBRADIÇA". ABRAÇOS... Roberto Udo Krapf
Olá meu bom amigo Muito obrigado🙏🙏🙏💐
Excelente trabalho
🙏🙏🙏👌❤️
If you tell me to like, I WONT!
Good work👍
Thank you so much 🙏👍
I enjoyed a lot and thanks
Glad you enjoyed it🙏💐
Can an Acme hand thread tap be made in the same way? Would any modifications to this protocol be needed?
yes it will
Very nice work
Thanks a lot🙏💐
Nice job sir
So nice of you🙏🙏💐
Very good u are free.mind
🙏
Nice job,👍👍👍👍👍👍👍👍
Many many thanks🙏💐
You're Welcome.@@Mastermind-
Спасибо. Идея которая лежит на поверхности. Можно изготовить метчик с направляющей. Его иногда так не хватает.
The card is great, but the quality of your camera😢😢😢
Very nice mate.
Thanks for the visit
Красавчик
Good oye Good
Thank you so much my dear friend 🙏💐
Great 👍👍👍
Thank you my friend 👍
Kamfettt tenan rika
Schöne Arbeit, aber lohnt sich der Aufwand.
👍👍🙏🙏
Love it
🙏🙏🙏💐
Very Very good
Thanks🙏💐
Mũi tê rô... mới tê rô 1 lần cùn răng rồi ak
موبدع وعمل جيد جداً
🙏🙏🙏👍
Bravo Bravo Türkiye İzmir selamlar ve abonelik 🎉
Merhaba değerli arkadaşım Eğlendiğine çok sevindim🙏💐
کار جالبی بود👌👌
سپاسگزارم دوست خوبم و خیلی خوشحالم که لذت بردی🙏💐
4:03 which insert are you using for turning???