Hyundai I40 Double Din Headunit Installation
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- How to install a double din headunit into a 2013 Hyundai i40
I was asked to install this headunit, the owner was looking for a reversing camera and navigation in their car. A new headunit seemed the best solution to this as it was much tidier than reversing cameras that click on over the rear view mirror or need another screen.
This is another Kenwood Headunit, a DMX5020DABS, so far i have been happy with the DMX8019DABS. The one fitted here has a capacitive touch screen but does lack wireless car play and android auto. Although both work through USB.
The facia kit and wiring harness were bought from Dynamic sounds, as was the headunit itself and the camera. Everything installed quite easily.
![ฮักเทื่อสุดท้าย - บอย ศิริชัย [OFFICIAL MV]](http://i.ytimg.com/vi/-1PoPoQ-B-k/mqdefault.jpg)
Thanks for uploading. Not sure if I’m even more scared of trying to replace my head unit now. But at least I have a fighting chance now.
Thanks for the comment, by all means feel free to ask any questions you may have. It is within the realms of the DIYer but does require a bit of care and attention.
One of the best videos working on hyundai i40. There is little information on our vehicles and you have covered soooo many areas of interest here... Many "how to" videos can go out of your post. Actually you should post them separately also, with designated names i.e. Rear seat removal or trunk liner removal etc.... I have saved it, liked it, and share it with my i40 club members on Facebook. You deserve it! Cheers!
Thanks for the comment, yes i noticed a distinct lack of any information for the i40. My friend who owns the car made the same complaint that he could find nothing online to try DIY jobs on it. Hopefully this video helps it does cover a fair amount of parts removal as you say.
I totally agree re the best way to join wires is to solder and heat shrink. I have recently started using heat shrink tubing with adhesive in and I reckon this has a slight edge. Thanks for the video mate it was very interesting. Although you made it look easy I dare say it isn't.
That would be one worth trying, does the adhesive stick while its cold or only activate with heat?
I see some wee connectors available that have the solder and insulation all in one, just heat them up the solder melts and the heat shrink, shrinks over the connector.
@@peugeotCitroen2CV It is hot melt glue in the tubing. I have even used it on the end of boot laces to stop them fraying!
Best quality video I have ever seen on TH-cam..no crap chat just pure informative video..that fella could probably take the whole car apart with that plastic lever 😆 🤣 😂
Answer a few of my questions and im not even fitting a new unit..well done mate
Thanks for the comment, great to read you appreciate the video.
How much does it cost this job on the same model car as of in the video?!
An incredible video sir, you are made a professional I have encouraged to install it in mine.
Could you tell me where I can get the 3D printed USB adapter? I have a friend with a printer that could print me
Hi, thanks for the comment.
I would like to upload the files to thingverse, but cant get logged in at the moment.
However can you message me on facebook
Search for Peugeotcitroen2cv-TH-cam
I can PM you across the files that way.
Hi all. Does anyone have an idea if I go back to the original player from another i40 to replace an aftermarket navigation, I will be asked for a code or computer rewrite for the old player??? thx
Wow, so helpful to install and replace in my i40....much appreciated
Thanks for the comment
Amazing job, mate. Thanks for uploading this video. Keep it up.
Great work here - thanks for posting
Thanks for the comment
How I can get like this radio?
Thank you
Great vid bud, easily the best online. Are you Armagh based? See the car was bought a Donnellys from the plate. Am considering an upgrade on the estate i40 as the touchscreen on the stock unit is acting up
Hi,
I am based near armagh yes, the car is not mine it belongs to a relative, possibly came from Ballymena but originally donnellys.
Thank you for the video, when adjusting the cabin temperature does it is show up on the stereo?
Hi there, no not on this car as it is one of the lower spec models it does not actually have digital climate control. I am not sure about retaining that feature, which would be important if you have climate controls that have an interface in the infotainment screen.
Speaking more generally the 407 has an arrangement like that where the climate control displays through the central screen. It limits aftermarket headunit choices to android units. I am not sure what works and what does not work well on these i40's so would recommend having a look through or asking on the owners club.
Hi is it hard to remove the entire dashboard to fix creaks when driving on rough roads? It's driving me mad, it's a big problem with i40s apparently 😞
Hi, i would not have a huge amount of experience at working on these i40's just this particular job has been about it. Rattly dashboards are an annoyance in general, removing the full dashboard i dont know if that would achieve much. it tends to be where multiple parts sit against each-other they will creak and rattle. Bits of felt, or old rags at these interface areas can help quieten them down. I have plenty of old french cars with trim rattles, there is the old one of just turn the radio up but at the same time its best to get to the root of the issue. The forums and owners clubs will be the best place to do more research into this issue finding out what others have done and what fixes work.
Hi mate can u tell me if the call buttons on steering wheel still work and the Bluetooth hands free button please
Hi, from memory they all did yes. The module bought takes the steering wheel controls and operates the radio. The actual radio itself has a menu where you can reconfigure what you want specific buttons to do.
Thank you for the video. Please introduce me where I can buy the wiring adaptor? I am in Vietnam. Many thanks
Hi there, i bought any of the parts fro this from a website called dynamic sounds. I am sure there are other suppliers for different markets although i would not be sure who they are. Best to ask on your local i40 or hyundai owners clubs to see what is recommended.
Hi mate I have Hyundai i40 Tourer and same is like on you change radio to satnav but I find original Hyundai i40 satnav and I want to replaced but somebody say if you don't have one originaly satnav can't work on your car he say is that real or lies to me also where can I get all cable connecting thanks Fernando
Hi thee frernando
I am no expert when it comes to the more intracate nuances of these hyundais. I think the cars with sat nav also have digital climate control and whatever other extras using canbus signals. At the very least a factory radio might need programmed to work with your car. I am not 100% sure the best course of action would be to join owners clubs/forums and ask there.
However i can say that in terms of functionality this JVC unit with apple car play/android audio is a much better user experience than the more outdated factory option. I use the analogy that if you were to start using a 2014 mobile phone it would feel its age, in car infotainment is very much the same.
Do the heater settings still show on the new screen ?
This particular model does not have climate control, not sure even if the higher spec cars use the central screen for heater settings as there are separate LCD displays for each side. But no not on this one the heater never displayed through the radio.
Necesito canbus para Hyundai i40?
Hi there, not that i am aware.
Great video, any chance you could upload the STLs for the USB adapter? =) I have a 3d printer myself and would love to be able to do this without designing my own
Hi there, yes no problem here is the link:
www.prusaprinters.org/prints/107015-hyundai-i40-usb-port
@@peugeotCitroen2CV Thank you so much! =)
Hi how much is coast to change I have 18 Reg Hyundai i40 tourer I want to change my basic radio to sat navigation like you did.
Hi,
Between £300-500 depending on what you buy, i have included the model name of the radio used in the video so you can do price comparisons to find the best deal although dynamic sounds is a reputable seller with good customer support.
@@peugeotCitroen2CV Which one to prefer to fixed like Kenwood, Pioneer, Sony brand name with world wide sat navigation including thanks.
@@trkturk7950
hi, unfortunately i am no expert when it comes to the variety of head-units out there. All i wanted was a capacitive touch screen and apple car play. To be honest id use car play over any installed navigation system as it will stay up to date.
Only downside i can see is the screen technology, a good enough touch interface but the screen is just an LCD. It does not react to ambient lighting very well, and at light being LCD instead of OLED it cant dim down nicely or even turn off entirely. I find them a tad bright at night even on the dimmest setting.
How much does it cost for the 3d print of the usb box and where do I get them from
Hi there, i have a link to the STL file in the video description, from there anyone with a 3D printer should be able to make it. A quick google for 3D printing service will yeild plenty of companies who can 3D print the part. I know my own 3D printer would estimate the cost at less than £3 but im currently away studying a masters so not at home to print anything off otherwise i would offer to print it.
I wouldn't be on any rush
Pls i want you to install one for me
Have you got a link for the radio
Unfortunately i do not as the owner of this car bought the radio.
However it is a Kenwood
Turkiyeden merhaba
İrlanda'dan selamlar
Where are you based?
Hi there, im from northern ireland
@@peugeotCitroen2CV I’m looking into patronising your services. Any contact to reach you on? I’m in Belfast