If you fill some of the bottles with water and freeze them they can take the place of the ice you added to the condenser. The cold lasts longer and when you are done you just put them back in the freezer.
In fact, by heating plastic without oxygen (it is a closed vessel), you create pyrolysis gas (which includes toxic parts). In the cooler you condense a part of it, depending on the temperature. The remaining gas leaving your seperator (the last vessel) is flammable, so lead it to your combustion area:). One big danger: depending on the composition of the plastics, the fuel and the gasses can (shall) be toxic....so in a more professional build up, you want flue gas cleaning
Impressive, but I can't be the only one concerned about the plastic pipe with petrol in it right over naked flame! Definately shield the plastic tubing from heat and perhaps use a rocket stove or woodgas stove to heat the pan (both can be made easily using tin cans) so that you require less wood and the heat is concentrated right beneath the pan. Great video, though, good to see people converting waste into fuel using low tech DIY methods.
That's the least of his worries considering how incredibly toxic this entire procedure is, also turning plastic into gasoline is the absolute worst thing you can do to plastic when it comes to the environmental impact its even worse than just burning it in an open fire. You see this all the time in the none developed world where people don't really have many options and it can be quite a fatal endeavour when you scale it up.
@@sirlinkthefourth6755 Life is often the cheapest resource to use up in a lot of poor countries, sadly. Like in Dahravi in Mombai- incredible resourcefulness is often tempered with life shortening industry (eg. Heating mud/human excrement and gold filings whilst hand rubbing mercury over it.)
small heads up; use metal or glass containers, or dedicated fuel containers, since most plastics will DISSOLVE when exposed to petroleum products like petrol/gasoline. Metal tubing would be better for controlled cooling since plastic is a VERY POOR conductor, then you could also run a chain of catch containers, the first for heavier oils, and the second for lighter fuels and so on Second item of note: you can use some of the byproduct (pick one you want to keep, namely diesel or gasoline and burn the other) as fuel to heat the pressure container rather than wood
My brother, I want to take this time to thank you for this video I’m so happy to come across your video I’ve been searching on how to make Feul but every one doesn’t show everything like you did from start to finish and I’m not so good at fixing or do things like this I know being a girl it’s not an excuse but I’m just not good at it. You’re so patient and you made it so simple even for a dummy like me can do it so thank you 🙏🏾 thank you 🙏🏾 so very much, the creator the most high the one and only who created heaven and earth with everything in it will continue blessings you abundantly. Thank you…
My brother, the son of the most high I want to take this time to thank you so very much for this video I’ve been searching on how to make diesel/ Feul but everyone else only showed parts of it not start to finish like you did you’re so patient and showed start to finish even for a dummy like me can do it I’m just not good at fixing or doing things like this I know being a girl it’s not an excuse but I’m just not good at it! The most high the creator who created heaven and earth will always always continue blessings you abundantly I think you so much for this video 🙏🏾🙏🏾🙏🏾🙏🏾
My brother, the son of the most high I want to take this time to thank you so very much for this video I’ve been searching on how to make diesel/ Feul but everyone else only showed parts of it not start to finish like you did you’re so patient and showed start to finish even for a dummy like me can do it I’m just not good at fixing or doing things like this I know being a girl it’s not an excuse but I’m just not good at it! The most high the creator who created heaven and earth will always always continue blessings you abundantly I think you so much for this video 🙏🏾🙏🏾🙏🏾🙏🏾
NOT petrol! At best, after refining it you can use it to power diesel engines BUT be careful, the newer diesel engines today are tuned very efficiently and won't run as good, might even damage a sensor/filter. You could get away with adding it at 4:1, 1 part plastic fuel to 4 parts diesel, but you are still changing the rate of burn. A friend of mine makes it and he runs an old ford transit on it, never had a problem so far, but he does distill it properly over several stages.
The guy in the video did make petrol and diesel and kerosene, separating the 3 is quite easy if you wanted to since they all have different weight points, this is really no different than the distillation of oil dug up from the ground the main difference being way more toxic waste is produced when you do it with plastic. I will also i will note that if you're thinking about this to be cheap then fair enough but if you're thinking about being environmentally friendly this is the objectively worst thing you can do to plastic waste, that's not a matter of opinion that's basic chemistry.
Oh my hat! I have so many questions. Why the huge fire under the plastic tubing?? With petrol in it? And the hammer for the ice tray :) This was educational though, thank you!
This whole thing is crazy and I'm about to watch some more videos to see if this really works as far as making fuel because when you put that little drop of oil at the end you can see the gasoline already on the ground and when you light it with the flame the whole area that you could see the gasoline already at Burns except the part you put the oil doesn't really burn any better you know what I'm saying. Why is your fuel for your fire to melt the stuff waste spread out and why do you use that tube?
@Nate SoundZ, The principal of this is sound, but this guys implementation is Sooo wrong. First, I cannot imagine that after 20 minutes of cooking that the plastic hose would be anything but melted mush. I would have expected to see WAY more carbon on the Pressure cooker. The image of that much liquid (presumably fuel) flowing through the hose on the way to the condenser is unrealistic, otherwise, why would you need a condenser. Given the way the contraption was setup, the condenser would have had to been FULL with condensed fuel pretty much before you would have gotten any fuel in the catch container since the condenser was BELOW the fuel catch container. I suppose the fuel on the ground that you noted could be chalked up to a previous test, however, this process (with out actual fractional distillation) I don't think would give you a fuel that is that volatile (Diesel lights slow which is, I believe the primary output of the gasification of plastics). Finally, why not show (like pretty much every other video) the fact that the vapor gas coming out of the final tank is also flammable. Again, the principal of gasification of plastic is sound, but I think this guy is way, is not exactly kosher.
How do you no burn the pan handle all up and the plastic hose while cooking that in the fire? and how much will that last ? and how many bottles was that ?and how do you store that? and does it smell bad while cooking
Good video, this can be used in a SHTF situation when gasoline is not readily available. People can use parabolic solar grillers to heat the plastic raw stock. The petrol like fluid may need to have higher octane number, people can add water or methanol to the fluid to raise octane number. Methanol can be distilled from wood and plants.
It is a simple distillation and condensation....what remains in the kettle??.... and while you do this out of control... you are exposed to all vapors that not be condensate...... take care.
I think he should first use a metallic pipe right from the pressure cooker gas outlet to avoid getting burnt from fire 🔥, then what is the octane level in this petrol?
It's a basic fractional distillation process! I recommend you use metal either copper or aluminum tubing! Not sure exactly how far that hoes it becomes flammable again but I assure you when processing flammable substances you don't wanna use plastic with open flame!plastic will be a joke! And if I'm not mistaken I believe you're going to want 2 elevate those jugs, as it is a condensation and evaporation process that your executing. so the higher the bottle the better the fuel!
No it isn't. I'm a chemical engineer, this is far from fractional distillation. It's pyrolysis followed by rectification/fractional distillation and very dangerous due to the carcinogenic toxins produced. Don't do this.
@@methylene5 I do have a question for ya though....I've seen it done much more elaborate ie metal tanks (propane) that are in a series with about a 15° angle up hill. For collection of well basically back yard ether. Either way here's my question does this produce legitimate gasoline that can be cycle through any vehicle or crude gas that u'd burn through an old carburetor vehicle? Thx in advance 4 your time.
@@jensen5668 Environmental concerns aside, the octane rating of the fuel will need to be determined. Petrol/gasoline engines are tuned based on both fuelling and ignition timing advance. If you use a fuel with too low an octane rating the engine will knock/ping/detonate and would cause serious damage. Also there is the possibility of carbon deposits (I can't say if this would occur as I don't know what the pyrolysis oil mixture is) which can cause pre-ignition during the compression stroke and under load conditions, destroy the engine, likely putting a rod through the block. Without specific data of exactly what the flammable oil is, it's impossible to say with certainty. If you were determined however and up for experimentation, at least fit a knock sensor to your engine block and with the corresponding knock light on your dash so you can watch for engine knock whilst taking it easy, see any knock then back off on the throttle immediately. There are anti-knock additives that can be added (assuming they dissolve and won't react in any way), in the old days they used tetraethyl lead (now banned, because of the lead toxicity), today they use MTBE (methyl tertiary butyl ether) as an anti-knock additive. In theory, and with a bit of luck, a blend could perhaps be made that could at least be safe for the engine. That would just require a bit of R&D and experimentation, and the blend would have to be consistent so best made in large quantities that would last until the next batch that would have to be retested. Whilst alcohols tend to have a very high octane rating (hence their use in race engines with water/methanol injection for instance), oils tend to have a low octane rating. Diesel has a terribly low octane rating of around 45 or so, that's why you shouldn't add/blend it with gasoline for use in a gasoline engine (at least not very much as it will reduce the overall octane rating a bit), but since diesel engines use direct injection (no spark plug and therefore not ignition timing advance) it's not a problem for diesel engines. On a side note, if you use a modern fuel injection vehicle with a stand alone engine management system installed and do your own tuning, you can reduce the timing advance for low octane fuel, you'll just lose some power/efficiency. Another option for you regarding octane considerations, would be to install a water injection system that sprays water into the intake manifold. I've built multiple systems, I currently use an Aquamist 15% methanol water injection system that fully tuneable for all ranges of RPM/boost. The water effectively increases the *in cylinder* octane rating, allowing for more timing advance and higher efficiency/power. Useful to know in a post apocalyptic scenario where you can't get the likes of MTBE or other complex molecules delivered to your front door but only have low octane fuel(s) available for your gasoline engine.
Cool video thanks. Can this go straight in a car without damaging it? Also, is there a risk of explosion when doing this??? I'm wondering though. Is there a way to make petrol from things like ethanol blended with oil or something? Anyone know? Something without all those different chemicals that someone can make easily that won't destroy a petrol engine and make it work?
The hole world is coming down with plastic. If that is possible then why aren't big factory's doing it. It would save a lot of money if it works good luck with it.
No it is not clean gasoline, you would need to do fractional destination to purify it, than with it do check which fraction is gasoline. Otherwise you will ruin your engine.
Don't try this, not only does it produce toxic gas it also produces sold toxic waste that needs to be desposed of properly. This is the type of project where if you need to ask questions don't even think about doing it. Not to mention that this is the objective worst thing you can do with plastic when it comes to environmental impact worse than just burning it in an open flame.
There really shouldn't be any beginners, safety and producing fuel from plastic are mutually exclusive concepts, you're dealing with fuming solid toxic waste that needs to be dealt with professionally as a inevitable byproduct.
@@jonathangauci2182 and smell as well. Petrol and diesel both have different smells. If you can’t smell, book a PCR test and self-isolate while awaiting results.
@@MrSupercar55 first of all because you smell it doesnt mean its good fuel and you need test it...second..i dont smell so after alot tests i dont know if the smell is like petrol and diesel. Third as you talk for me you dont have experience and still dont know what smell pyrolysis has apart it is danger to smell because it way contain alot chemicals if not do it well.
IT IS DISTILLED AT DIFFERENT TEMPS FOR DIFFEREN DIFFUSIONS,GAS IS COLLECTED AT A HIGHER VAPOR POINT AND THEN FEFINED CHEMICLY OR WITH WATER WASHING AND OR OTHER PROSSES.,THIS WHOLE VIDEO IS BULLSHIT,ALL THE HOSES WOULD DISCOLOR HAVE CONDENSATION AND BE OR START TO BE MELTED,LIQUID WOULD BE VERY CLOUDY AND NOT READY FOR USE
It's called a pressure cooker/pot. Used for cooking boney meat stews. Look at your nearest supermarket in the kitchen section. Or ask women about it they should know where to find one
IT MUT BE DRY OR THE WATER WILL EVAPORATE RELEASE OXEGEN AND POSSIBLY CAUSE FIRE AND JUST BURN THE PLASTIC,IT MUST BE A OXYGEN DEPRIVED ENVIRONMENT FOR GASSIFICATION TO TAKE PLACE
Has anyone tried this, I'm a little hesitant since the spot that gets lit is already wet before they light it, which makes me think they poured a propellant, then poured what they "made" onto that.
It could have just been from another take with the video. I have watch quite a few videos on this subject and I am really wanting to find some time to play around with it. The plastic condensation hose was sketchy as hell tho!
My understanding is that for making fuel you use HDPE, not PETE which is what the soda bottles would be made from, HDPE is generally used in milk jugs, oil bottles, and the like.
For some reason it says there's a reply to your comment but it's not visible to me - if you managed to get an answer to your question, could you tell me too please? 🙂
@@heritier5119 .. I tried Pete and it just burned to nothing.. I had a 210L metal drum full to the top with p.e.t.e and ended up with nothing but a bad smell
@@harlenebenfield2628 Burning and distilling are two separate processes, that's not to say you can't turn a 55 gallon drum into a still if you understand the process.
I have three questions. 1.how to clean this fuel before it use. 2.Does it increase the efficency of fuel using the copper ? 3.putting this fuel in to bike without cleaning,is there any effect to head of the engine ?
@@MH4TECH how make it pure please explain or anyother source of knowledge to be taken..an early reply is very much be appreciated..thanks for replying Sir...
@@alexsander8672 well I didn't much understand anything but is it that simple to make ? I mean there must something more than boiling some Plastic bottles right ??
@@Ziogas.x hi , well I don't know but I guess we can use it cutting the grass or another small machine , however on the video the gay said that is good quality gasoline .
No he never separated all the different products he made that's a mix of paraffin wax desel gasoline and kerosene. If you need to ask how to separate them this project is too dangerous for you.
![Plastic to fuel - DO NOT USE PET TO MAKE BIODIESEL [Episode 2]](http://i.ytimg.com/vi/mfMzyFSmQHo/mqdefault.jpg)
![Plastic to fuel - DO NOT USE PET TO MAKE BIODIESEL [Episode 2]](/img/tr.png)
If you fill some of the bottles with water and freeze them they can take the place of the ice you added to the condenser. The cold lasts longer and when you are done you just put them back in the freezer.
Who is here from Instagram reel😂😂😂😂😂😂😂😂😂😂😂😂
Try switching out the plastic coil for a copper one, the cooling will be much more effective then.
Dont complain,you dont know anything...should i tell him dont used that bucket,used steel bucket..haha
@@themuskeeters1887 no you should tell him don't wear jeans!!! Just naked more cool😎😎😎
@@themuskeeters1887 yes actually that might be good advice honestly
In fact, by heating plastic without oxygen (it is a closed vessel), you create pyrolysis gas (which includes toxic parts). In the cooler you condense a part of it, depending on the temperature. The remaining gas leaving your seperator (the last vessel) is flammable, so lead it to your combustion area:). One big danger: depending on the composition of the plastics, the fuel and the gasses can (shall) be toxic....so in a more professional build up, you want flue gas cleaning
True enough, avoiding PVC will reduce the amount of toxins though
how do you do flue gas cleaning? what do i google?
You should make a video showing how to do flue gas cleaning with household items
May I suggest using a copper pipe as your coil for more efficient heat transfer?
Impressive, but I can't be the only one concerned about the plastic pipe with petrol in it right over naked flame! Definately shield the plastic tubing from heat and perhaps use a rocket stove or woodgas stove to heat the pan (both can be made easily using tin cans) so that you require less wood and the heat is concentrated right beneath the pan. Great video, though, good to see people converting waste into fuel using low tech DIY methods.
can't burn without oxygen,air, in the plastic pipe
That's the least of his worries considering how incredibly toxic this entire procedure is, also turning plastic into gasoline is the absolute worst thing you can do to plastic when it comes to the environmental impact its even worse than just burning it in an open fire. You see this all the time in the none developed world where people don't really have many options and it can be quite a fatal endeavour when you scale it up.
@@sirlinkthefourth6755 Life is often the cheapest resource to use up in a lot of poor countries, sadly. Like in Dahravi in Mombai- incredible resourcefulness is often tempered with life shortening industry (eg. Heating mud/human excrement and gold filings whilst hand rubbing mercury over it.)
Very nice method 👍👍
small heads up; use metal or glass containers, or dedicated fuel containers, since most plastics will DISSOLVE when exposed to petroleum products like petrol/gasoline.
Metal tubing would be better for controlled cooling since plastic is a VERY POOR conductor, then you could also run a chain of catch containers, the first for heavier oils, and the second for lighter fuels and so on
Second item of note: you can use some of the byproduct (pick one you want to keep, namely diesel or gasoline and burn the other) as fuel to heat the pressure container rather than wood
My brother, I want to take this time to thank you for this video I’m so happy to come across your video I’ve been searching on how to make Feul but every one doesn’t show everything like you did from start to finish and I’m not so good at fixing or do things like this I know being a girl it’s not an excuse but I’m just not good at it. You’re so patient and you made it so simple even for a dummy like me can do it so thank you 🙏🏾 thank you 🙏🏾 so very much, the creator the most high the one and only who created heaven and earth with everything in it will continue blessings you abundantly.
Thank you…
My brother, the son of the most high I want to take this time to thank you so very much for this video I’ve been searching on how to make diesel/ Feul but everyone else only showed parts of it not start to finish like you did you’re so patient and showed start to finish even for a dummy like me can do it I’m just not good at fixing or doing things like this I know being a girl it’s not an excuse but I’m just not good at it! The most high the creator who created heaven and earth will always always continue blessings you abundantly I think you so much for this video 🙏🏾🙏🏾🙏🏾🙏🏾
My brother, the son of the most high I want to take this time to thank you so very much for this video I’ve been searching on how to make diesel/ Feul but everyone else only showed parts of it not start to finish like you did you’re so patient and showed start to finish even for a dummy like me can do it I’m just not good at fixing or doing things like this I know being a girl it’s not an excuse but I’m just not good at it! The most high the creator who created heaven and earth will always always continue blessings you abundantly I think you so much for this video 🙏🏾🙏🏾🙏🏾🙏🏾
@@CapnSky14 umm... I think your posts should be aimed at the vid creator, not me 😅
@@GaisaSanktejo 😂 sorry I realized that after thank you
Those high flames at one moment are a concern. The plastic tubing can melt and can cause burning.
Also don't use an uncontrolled fire like this fella, a rocket stove is absolutely perfect for this
Just one question. Why was the area wet before you poured the fuel on the spot?
He may have tried lighting it before to see if it works?
in sri lanka locally we make ( kasippu ) alcohol by using yeast, sugar, water Etc . So that sperit very strong flammable power.
අඩෝ කසියා හදන්න උන්න කියලා දෙමුද 😂
@@gamingffpvt5449 😂
කසිප්පු වලින් හැදෙන මොතනෝල් පැහැදිලිව වෙන් කරගන්න පුළුවන් නම් හොදයි .
ඒකෙන් ඩීසල් හදාගන්න පුළුවන්
😂
🤣 kasiya
Wow wonderfull
You should use a sawdust stove to concentrate more heat under the pressure cooker.
Complainer
He knows better than you so dont complain.gtfo
maybe rocket stove
NOT petrol! At best, after refining it you can use it to power diesel engines BUT be careful, the newer diesel engines today are tuned very efficiently and won't run as good, might even damage a sensor/filter. You could get away with adding it at 4:1, 1 part plastic fuel to 4 parts diesel, but you are still changing the rate of burn. A friend of mine makes it and he runs an old ford transit on it, never had a problem so far, but he does distill it properly over several stages.
The guy in the video did make petrol and diesel and kerosene, separating the 3 is quite easy if you wanted to since they all have different weight points, this is really no different than the distillation of oil dug up from the ground the main difference being way more toxic waste is produced when you do it with plastic.
I will also i will note that if you're thinking about this to be cheap then fair enough but if you're thinking about being environmentally friendly this is the objectively worst thing you can do to plastic waste, that's not a matter of opinion that's basic chemistry.
Can I ask? Is it okay if we can add cellphanes or plastic bottles only?
Wow....bagus videonya kak sangat bermanfaat untuk menambah ilmu saya terimakasih videonya kak.... 👍👍👍
Amazing 👏👏👏
Oh my hat! I have so many questions. Why the huge fire under the plastic tubing?? With petrol in it? And the hammer for the ice tray :) This was educational though, thank you!
This whole thing is crazy and I'm about to watch some more videos to see if this really works as far as making fuel because when you put that little drop of oil at the end you can see the gasoline already on the ground and when you light it with the flame the whole area that you could see the gasoline already at Burns except the part you put the oil doesn't really burn any better you know what I'm saying. Why is your fuel for your fire to melt the stuff waste spread out and why do you use that tube?
@Nate SoundZ, The principal of this is sound, but this guys implementation is Sooo wrong. First, I cannot imagine that after 20 minutes of cooking that the plastic hose would be anything but melted mush. I would have expected to see WAY more carbon on the Pressure cooker. The image of that much liquid (presumably fuel) flowing through the hose on the way to the condenser is unrealistic, otherwise, why would you need a condenser. Given the way the contraption was setup, the condenser would have had to been FULL with condensed fuel pretty much before you would have gotten any fuel in the catch container since the condenser was BELOW the fuel catch container. I suppose the fuel on the ground that you noted could be chalked up to a previous test, however, this process (with out actual fractional distillation) I don't think would give you a fuel that is that volatile (Diesel lights slow which is, I believe the primary output of the gasification of plastics). Finally, why not show (like pretty much every other video) the fact that the vapor gas coming out of the final tank is also flammable.
Again, the principal of gasification of plastic is sound, but I think this guy is way, is not exactly kosher.
gracias excelente información y demostración
5:11 no sé como esa manguera no se ha derretido con ese fuego. Milagro divino
This pot can it be reused? What happens with the plastic inside?
Does it stick2
So if this is a sound experiment, it basically the fundamentals of making moonshine 🤔
What does the empty pot look like?
คมกริ๊ปๆ..ขอบคุณมากๆ.คับ
Nice
How do you no burn the pan handle all up and the plastic hose while cooking that in the fire? and how much will that last ? and how many bottles was that ?and how do you store that? and does it smell bad while cooking
looks like you had something on the ground before you lite it up?
Good video, this can be used in a SHTF situation when gasoline is not readily available. People can use parabolic solar grillers to heat the plastic raw stock.
The petrol like fluid may need to have higher octane number, people can add water or methanol to the fluid to raise octane number.
Methanol can be distilled from wood and plants.
is it suitable for bike engine
love this video very beneficial
Well done body, what is the out put we get? Benzine ?
It is a simple distillation and condensation....what remains in the kettle??.... and while you do this out of control... you are exposed to all vapors that not be condensate...... take care.
Better be careful to do this kind of projects. Study properly and follow safety precautions. Good works.
I think he should first use a metallic pipe right from the pressure cooker gas outlet to avoid getting burnt from fire 🔥, then what is the octane level in this petrol?
maybe someone can explain why the condenser coil isn't full of 'petrol' but the collection container is?
Creative technology
Creative bullshit more like
It's a basic fractional distillation process! I recommend you use metal either copper or aluminum tubing! Not sure exactly how far that hoes it becomes flammable again but I assure you when processing flammable substances you don't wanna use plastic with open flame!plastic will be a joke! And if I'm not mistaken I believe you're going to want 2 elevate those jugs, as it is a condensation and evaporation process that your executing. so the higher the bottle the better the fuel!
No it isn't. I'm a chemical engineer, this is far from fractional distillation. It's pyrolysis followed by rectification/fractional distillation and very dangerous due to the carcinogenic toxins produced. Don't do this.
@@methylene5 I looked it up....yup u are correct! Thx for the heads up chief.
@@methylene5 I do have a question for ya though....I've seen it done much more elaborate ie metal tanks (propane) that are in a series with about a 15° angle up hill. For collection of well basically back yard ether. Either way here's my question does this produce legitimate gasoline that can be cycle through any vehicle or crude gas that u'd burn through an old carburetor vehicle? Thx in advance 4 your time.
@@jensen5668 Environmental concerns aside, the octane rating of the fuel will need to be determined. Petrol/gasoline engines are tuned based on both fuelling and ignition timing advance. If you use a fuel with too low an octane rating the engine will knock/ping/detonate and would cause serious damage. Also there is the possibility of carbon deposits (I can't say if this would occur as I don't know what the pyrolysis oil mixture is) which can cause pre-ignition during the compression stroke and under load conditions, destroy the engine, likely putting a rod through the block. Without specific data of exactly what the flammable oil is, it's impossible to say with certainty. If you were determined however and up for experimentation, at least fit a knock sensor to your engine block and with the corresponding knock light on your dash so you can watch for engine knock whilst taking it easy, see any knock then back off on the throttle immediately. There are anti-knock additives that can be added (assuming they dissolve and won't react in any way), in the old days they used tetraethyl lead (now banned, because of the lead toxicity), today they use MTBE (methyl tertiary butyl ether) as an anti-knock additive. In theory, and with a bit of luck, a blend could perhaps be made that could at least be safe for the engine. That would just require a bit of R&D and experimentation, and the blend would have to be consistent so best made in large quantities that would last until the next batch that would have to be retested.
Whilst alcohols tend to have a very high octane rating (hence their use in race engines with water/methanol injection for instance), oils tend to have a low octane rating. Diesel has a terribly low octane rating of around 45 or so, that's why you shouldn't add/blend it with gasoline for use in a gasoline engine (at least not very much as it will reduce the overall octane rating a bit), but since diesel engines use direct injection (no spark plug and therefore not ignition timing advance) it's not a problem for diesel engines.
On a side note, if you use a modern fuel injection vehicle with a stand alone engine management system installed and do your own tuning, you can reduce the timing advance for low octane fuel, you'll just lose some power/efficiency.
Another option for you regarding octane considerations, would be to install a water injection system that sprays water into the intake manifold. I've built multiple systems, I currently use an Aquamist 15% methanol water injection system that fully tuneable for all ranges of RPM/boost. The water effectively increases the *in cylinder* octane rating, allowing for more timing advance and higher efficiency/power. Useful to know in a post apocalyptic scenario where you can't get the likes of MTBE or other complex molecules delivered to your front door but only have low octane fuel(s) available for your gasoline engine.
Is that just the steam hole on the pot's lid? So like distilling?
Pretty much
Very good
Free ideas
Does long or short tube like the thumbnail make a difference? Should it be a different material to plastic?
And how many coil windings?
Copper is great, and non plastic containers since petrol products can dissolve plastics
Vacuum need less temperature and less toxic output.Using zeoilite as cstalyst much better,would be no more wax coming out
Do not change anything. Great video.
It looks simple enough, it actually reminds me a lot of desanilation or turning salt water into fresh water.
Can you use this gasoline in a car or motor bike
Amazing
can it use in vechile directly like car and bike
Cool video thanks. Can this go straight in a car without damaging it? Also, is there a risk of explosion when doing this???
I'm wondering though. Is there a way to make petrol from things like ethanol blended with oil or something? Anyone know?
Something without all those different chemicals that someone can make easily that won't destroy a petrol engine and make it work?
Diesel vehicles… probably older models 80s or early 90’s wouldn’t put it in anything newer tho.
nice trick man
😉😉👌
The hole world is coming down with plastic. If that is possible then why aren't big factory's doing it. It would save a lot of money if it works good luck with it.
wow wow i will try
can this fuel be used to run a gas engine car?
No it is not clean gasoline, you would need to do fractional destination to purify it, than with it do check which fraction is gasoline. Otherwise you will ruin your engine.
เอาไปใช้แทนแกสในครัวเรือนด้วยเตาพิเศษที่เติมอากาศกับน้ำมันตัวนี้ดีกว่า อย่าเสี่ยงใช้กับเครื่องยนต์
Ad salt with ice for potententialised the cold...
Cool music score, who is it?
Good work but at the end it turns into diesel or gasoline? If so, in what type of engines will be used? Thank you
Gas, diesel can't burn with a burning paper
@@V8pulley all of the above it's gasoline desel paraffin wax and kerosene, he never separated them.
Why are using a hammer to remove ice from an ice tray 😂 just twist both ends in opposite directions
Too look technical lol..
Broooo😂😂😂🔥
🤣💯
So is this just like regular gas?
Why not use a rocket stove to heat the pot? Little or no smoke and it is 99% efficient fuel use.
Can we use it bike enjine???
nice pro very. thank you ❤❤❤❤
Waw
Just melted plastic smoke distilled turns into gasoline?
I think that oil is equivalent to kerosene, because petrol will burn more stronger than that fire. Petrol is more combustible
Good for diesel engines though.
Awesome video! Can you please put the materials? I want to try it and it will be easier in that way :)
Danna ni lo intentes... es un suicidio.
I am using plastic national products here. This is just an experiment. It is better not to try at home
Don't try this, not only does it produce toxic gas it also produces sold toxic waste that needs to be desposed of properly. This is the type of project where if you need to ask questions don't even think about doing it.
Not to mention that this is the objective worst thing you can do with plastic when it comes to environmental impact worse than just burning it in an open flame.
Awesome
Please can you start using the fuel or you will have to treat it before
I think a more controlled fire will be safer for beginners. 😬 Great video though!
And more efficient 👌
This is for men only!
There really shouldn't be any beginners, safety and producing fuel from plastic are mutually exclusive concepts, you're dealing with fuming solid toxic waste that needs to be dealt with professionally as a inevitable byproduct.
This guy has obviously never used a hammer, I’ve cube tray, or started a fire before this video.
What is the name of this metal like sufuria please 🙏
i like it ooh
Milagre!!! A mangueira da panela nao derreteu.
Mas essas mangueiras são feitas justamente para aguentar alta temperatura.
whats the inside of the pot look like?
Its just water. He removed the plastic before plutting it om THE fire
How do you distinguish between petrol and diesel after this experiment? And can you make a video about how to distill it to get more pure fuel
Simple, just check boiling point and weight.
@@jonathangauci2182 and smell as well. Petrol and diesel both have different smells. If you can’t smell, book a PCR test and self-isolate while awaiting results.
@@MrSupercar55 first of all because you smell it doesnt mean its good fuel and you need test it...second..i dont smell so after alot tests i dont know if the smell is like petrol and diesel. Third as you talk for me you dont have experience and still dont know what smell pyrolysis has apart it is danger to smell because it way contain alot chemicals if not do it well.
@@MrSupercar55 Fuel made by pyrolysis does not smell like Commercially acquired Gasoline, or Diesel
IT IS DISTILLED AT DIFFERENT TEMPS FOR DIFFEREN DIFFUSIONS,GAS IS COLLECTED AT A HIGHER VAPOR POINT AND THEN FEFINED CHEMICLY OR WITH WATER WASHING AND OR OTHER PROSSES.,THIS WHOLE VIDEO IS BULLSHIT,ALL THE HOSES WOULD DISCOLOR HAVE CONDENSATION AND BE OR START TO BE MELTED,LIQUID WOULD BE VERY CLOUDY AND NOT READY FOR USE
You should totally put up a materials list
Could I do this as a science experiment? Is it safe to try at home?
Where can I buy a pot that exactly looks like this one
It's called a pressure cooker/pot. Used for cooking boney meat stews.
Look at your nearest supermarket in the kitchen section. Or ask women about it they should know where to find one
This diy petrol fume same smell like that sold at the patrol station.?
Hi bro . are you put the water with plastic or not
IT MUT BE DRY OR THE WATER WILL EVAPORATE RELEASE OXEGEN AND POSSIBLY CAUSE FIRE AND JUST BURN THE PLASTIC,IT MUST BE A OXYGEN DEPRIVED ENVIRONMENT FOR GASSIFICATION TO TAKE PLACE
WOW THANKS
Has anyone tried this, I'm a little hesitant since the spot that gets lit is already wet before they light it, which makes me think they poured a propellant, then poured what they "made" onto that.
You can try it and see if it is honest. But take care of your own safety.
Excectly my point Y flow is already wet
I saw it too
It could have just been from another take with the video. I have watch quite a few videos on this subject and I am really wanting to find some time to play around with it. The plastic condensation hose was sketchy as hell tho!
I would like to see what is left in the pot
My understanding is that for making fuel you use HDPE, not PETE which is what the soda bottles would be made from, HDPE is generally used in milk jugs, oil bottles, and the like.
correct ,when vaporized it remains a toxic sulfur gas that can harm and or kill !
For some reason it says there's a reply to your comment but it's not visible to me - if you managed to get an answer to your question, could you tell me too please? 🙂
Pete for petrol and HDPE for diesel
@@heritier5119 .. I tried Pete and it just burned to nothing..
I had a 210L metal drum full to the top with p.e.t.e and ended up with nothing but a bad smell
@@harlenebenfield2628 Burning and distilling are two separate processes, that's not to say you can't turn a 55 gallon drum into a still if you understand the process.
What's the length of the hose?
I want to try make it.
Most thank to you 👍🙏
Baba Ramdev making petrol 🤣🤣
Yz
Thank god for #Tesla unless needed for firing my choal grill 😂
I have three questions.
1.how to clean this fuel before it use.
2.Does it increase the efficency of fuel using the copper ?
3.putting this fuel in to bike without cleaning,is there any effect to head of the engine ?
This is only an experiment. It needs to be more pure to use on a motorcycle
@@MH4TECH how make it pure please explain or anyother source of knowledge to be taken..an early reply is very much be appreciated..thanks for replying Sir...
What do you think gum leives have always been used for?
Nice smells.
what about the rubber pipe connect to the steel on the fire, how come the first did not burn the rubber ????
Nu cred că e rentabil:cât consumi pt.a produce cât?
I wonder why the plastic tube did not catch on fire the first time
It is, in fact, not a process of destilación, it is a real miracle what we see on this video....
what can u do with it
Does this actually work ? Can you use it in vehicles ? Are there any tips ?
th-cam.com/video/Fy71PH3MdjM/w-d-xo.html
it is in spanish but a hope this video can help you,
@@alexsander8672 well I didn't much understand anything but is it that simple to make ? I mean there must something more than boiling some Plastic bottles right ??
@@Ziogas.x hi , well I don't know but I guess we can use it cutting the grass or another small machine , however on the video the gay said that is good quality gasoline .
ay un detalle dónde ramo el líquido avía una mancha umeda y el líquido lo ramo en sima desa mancha umeda porque no loisu en un aria seca
But one thing gets me the plastic in the main pan how does it turn to petrol when it will just melt 🤔
جزاك الله خيرا كثيراً
How much fuel do you get after the use of the fuel that is needed to create it
It's just an experiment. It needs to be further developed to use it longtime
How did you get a larger mass of liquid as compared to the mass of plastic you started with? Where did that extra mass come from?
the bucket is full of water, to cool down the gases and to get them to condense. the fuel he made was in the small container with the orange cap.
Can be use that to motorcycle gasoline?
No he never separated all the different products he made that's a mix of paraffin wax desel gasoline and kerosene. If you need to ask how to separate them this project is too dangerous for you.