Hi Gaus. ABS plastic dissolved in acetone releases styrene which is carcinogenic. I recommend using two-component epoxy resin. It reconstructs the missing parts better and has no health risks
Do you know what kind of plastic? Polypropylene different from polyethylene, etc. I have always struggled trying to fix broken plastic, this looks slick. Also, is this nearly as strong as original? Did not know this was possible. @autophreaktrishield
Just a tip if you rub wax onto a part that doesn't need to be fixed but you want the same surface finish in your repair you can use hot glue in the undamaged area to take an impression of the surface and then use the hardened hot glue as one of your repair sides and you will get a near seamless repair. As far as using the ABS it's fine as long as your in a well ventilated area and using proper PPE. Plus you will get a better molecular bond using the same material and a matching color. Which is better then Epoxy.
Salvation is Simple, Here is The True Savior HalleluYAH “Hallel u YAH - Praise ye YaH” YaH is The Father (Genesis 1) YaH arrives via the TENT OF MEETING YaH was Who they Crucified for our sins YaH was Crucified on an Almond TREE Ancient Semitic Moshe (Moses) Isaiah Scroll (The Original Isaiah) Isaiah 42:8 I am YaH; that is my Name! I will not yield my glory to another or my praise to idols. Isaiah 43:11 I am YAH, there is no other Savior but Me. Isaiah 45:5 I am YaH, and there is none else.
Es importante saber que los plásticos no son todos iguales, los hay de muchos materiales diferentes y aunque cuesta de creer, si intentas unir plásticos de diferentes materiales NUNCA se van a unir. Buen vídeo!
it's not for all the plastic (hence you can see as he does using plastic cup for) and in case you will combine different tipe of plastic, it won't bond too much well, but for those, what can be melted by acetone or somehow reacts with (PVC, ABS, polystyren) it's nice tip, actually.
What would be interesting is a durability test. I once bought a two-component glue with a primer made for polyolefins, but it still didn't last very long. Reinforcing with sheet metal still works best for me.
A great idea for plastics that can dissolve in acetone, but YIKES! I have a very nice scar on the knuckle of my left index finger where the blade went down to the bone from doing what you are doing at 6:09.
Facts: actually with practice it's an acquired skill, better blade control to cut towards you. i read this how they prove it to be true years ago. just be safe Bro's
I also learned the hard way, to never use the utility knife to you, I mean if it miss , straight to your finger! Always cut from you direction. If you need absolutly to cut something, to your side direction, make sure to never hold the object like he did in the video! Hold it in a way, with keeping in mind that if it miss cut, if wont hurt your holding hand.
Questions about your idea here I like it lots why not weld it ? Will the asitone work on all plastics? Some plastics are meant to with stand harsh chemicals like that of asitone And about how long will it take for the slurry project to dry or cure completely? Love the idea 😀😀💡💡!!!!!!
Polystyrene, acrylic, polycarbonate, ABS, and asorted copolymers can melt in acetone. PP plastic (Polypropylene), which is used in many things around the house and car/moto parts, doesn't melt.
Opposite. It’s only possible to control blade progression when it’s closing to you. If it’s going away from you, you are weaker and have much less control on it so it’s very hazardous, and high risk of getting harm for you or others. But it’s true his left hand is not correctly positioned, and blade movement erratic, it’s probably due to video constraint.
La idea de hacer plástico diluido con acetona es genial lo único deficiente fue la forma como manipulates el trabajo no fue nada desprolijo se vio que estabas muy nervioso pero igual se te dan las gracias por esa buena idea saludos desde Chile
The plastic used in the video is ABS plastic, which breaks down when you add Acetone to it, resulting in the plastic sludge. Plastic bottles are likely made of Polyethylene and Google says Acetone can break down Polyethylene, but I'm unsure if it will turn it into a useful sludge like in the video.
Im thinking pouring acetone in a plastic cup to melt plastic might be a not so good choice of containers but it seemed to hold up for this video. Ive used this a few times when i couldnt find a piece of matching plastic type to weld in place to repair broken and missing pieces.
You might try MEK. Methyl Ethel Ketone. It may be hard to find nowadays if I remember correctly it will melt plexiglass. Sometimes it's necessary to cut towards yourself, just don't slip. And if you do get out the super glue
Gracias por compartir los conocimientos...en caso que no tengas paga comercial... La pega de plástico fuerte en Venezuela solo vale 3 dólares y es muy fuerte quiero saber si estás soldaduras son igualmente bien fuertes.? La acetona es igual o más costosa que esa pega fuerte...
Do you mean super glue (cyanoacrylate)? It's about $1 in my currency, while acetone is $5. But for those price, you get 25 ml of super glue, and 1 liter of acetone.
This works equally well with PMMA/Acrylic/Perspex as it does with PC as shown. I have been doing this to make specialty mixes of PMMA weld. Be advised that with PMMA or PC you want to make your donor chips as small as possible. With softer plastics such as PC, you can use a cheese grater or with harder plastics such as PMMA you could use a metal file. Beware that with PMMA, crazing is possible with extruded sheet. Best results are found when welding cast PMMA.
Can you specify the types of plastic in terms of the grading code (1-7) that is stamped on which work? Also what is the percentage of acetone that you need? Will regular nail polish remover work?
@@maxinvictus Well that was interesting. I never checked until now but it's surprising that PMMA is actually #7. That's a shame too because it is actually fully recyclable with multiple cheap and safe pathways. You may find PMMA sold as Plexiglass in US/Canada, Perspex in Europe, or worldwide as Acrylic (as in Acrylic paints or Acrylic resin). As for w/w I usually just eyeball it but you can definitely be more scientific about it. Start around 1:1 and work your way up or down as needed. Dissolving takes time. Can take several days. Use a container safe for acetone such as glass or PP (#5). Nail polish remover should be fine so long as it does not contain any oils, fragrances, dyes, or other chemicals.
自分もアセトンでABS樹脂を溶かして自動車内装のABS樹脂パネルを修正したことがあります。 質問ですが、動画始めの方でアセトンで溶かしているプラスチック樹脂は何でしょうか？ （ABS樹脂 or ポリプロピレン樹脂 or ウレタン樹脂） また動画中の車のバンパー、ファン、バッテリーカバーのそれぞれの部材が何のプラスチック樹脂か教えていただけませんでしょうか？
Bonjour, cela paraît vraiment intéressant, il faudra que j'essaye. - Mais l'usage de l'acétone (1:02), doit s'accompagner de nombreuses précautions et c'est de votre responsabilité de le signaler clairement. On voit bien vos gants, mais on ne sait pas si vous travaillez dans une pièce aérée par exemple, loin de toute flamme, etc. Par exemple vous pourriez écrire : "avant d'utiliser l'acétone, veuillez prendre connaissance des précautions d'emploi signalées par le fabricant."
buena idea pero a mi ver se le podrian hacer unos pequenos orificios en ambos lados a lo largo de la linea de rotura para que el plastico tuviera mas fijación
PS plastic (also known as Polystyrene) and ABS plastic are soluble in acetone, ester, ethylene dichloride, these types of plastic are often produced in plastic foam food containers, plastic CD, DVD cases, children's toys, computers, hair dryers and kitchen appliances. Insoluble plastics include PP, PET, HDPE, PVC, LDPE
Aquí, en Argentina, es bastante difícil conseguir acetona técnica por su alta toxicidad (fumar no está prohibido). Para estos arreglos pequeños yo uso grafito (el que se usa para lubricar cerraduras) y cianocrilato. El resultado es fortísimo y se pega a cualquier plástico hasta los pinchazos en colchones inflables...
El del ventilador del fancooler me deja pensativo si al derretir él plástico como líquido perdería propiedades de resistencia, por ello no sé los expertos aquí me guíen si, sería conveniente mezclar ese plástico líquido con otro componente químico y así tenga mayor durabilidad, igual el video me está dando la idea para reparar una pieza de notebook, en especifico el mecanismo de la tecla el cual se partió un pasador o lengueta.... Intentaré a ver qué pasa ojalá funcione por muy largo tiempo... Gracias por el video
Hola buenas tardes, una pregunta que tipo de plástico debe de ser porque yo tome unas tapaderas de refresco le puse acetona y no se hizo plástico líquido.
Is it possible to put it on transparent red acrylic and get a transparent red color and then use it for repairs, and the result will be the same color as the piece that you repaired ????????????... Please reply.
Me gustó mucho tu video , disculpa mi sugerencia, tu no explicaste que clase de plástico estas usando, hay plástico que el acetona no lo deshace, porque hay botellas de plástico que contienen acetona, en mi caso si se que clase estas usando, pero las demás personas, por ejemplo las sillas de plástico, esas no se pueden hacer líquido, saludos.
Hi Gaus. ABS plastic dissolved in acetone releases styrene which is carcinogenic. I recommend using two-component epoxy resin. It reconstructs the missing parts better and has no health risks
Thank you so much ❤️❤️❤️
I've used this technique and it works GREAT where 2 part epoxy does not work.
You are not supposed to drink it.😃
You inhale it when the mix is in liquid phase@@waihonlam7808
@@waihonlam7808aha mr wiseguy
If you need specific colours Lego blocks disolve well in acetone.
Thats a great tip thanks you so in reality if you had small moulds, you can recreate things like radio buttons etc. make custom interior mods.
That’s a great tip-but my stepson would 💩 if he saw all his legos melted down like that😂
@@johnnyx53😂😂
Lots of Volvo guys that repair turbo brick 80s era wagons use lego to fix their dashes
Do you know what kind of plastic? Polypropylene different from polyethylene, etc. I have always struggled trying to fix broken plastic, this looks slick. Also, is this nearly as strong as original?
Did not know this was possible.
@autophreaktrishield
Just a tip if you rub wax onto a part that doesn't need to be fixed but you want the same surface finish in your repair you can use hot glue in the undamaged area to take an impression of the surface and then use the hardened hot glue as one of your repair sides and you will get a near seamless repair. As far as using the ABS it's fine as long as your in a well ventilated area and using proper PPE. Plus you will get a better molecular bond using the same material and a matching color. Which is better then Epoxy.
Yes, Thank you so much!
@@GausDIY
Can I use acetone polish remover that my wife has to met this plastic? If not what brand or acetone is required
Salvation is Simple, Here is The True Savior
HalleluYAH “Hallel u YAH - Praise ye YaH”
YaH is The Father (Genesis 1)
YaH arrives via the TENT OF MEETING
YaH was Who they Crucified for our sins
YaH was Crucified on an Almond TREE
Ancient Semitic Moshe (Moses)
Isaiah Scroll (The Original Isaiah)
Isaiah 42:8
I am YaH; that is my Name! I will not yield my glory to another or my praise to idols.
Isaiah 43:11
I am YAH, there is no other Savior but Me.
Isaiah 45:5
I am YaH, and there is none else.
Acetona pura , da igual la marca pero que sea pura.@@DAT-TEXAS-DUDE
where can iget acetone
I use Permatex Plastic Welder. It’s black, hardens like a rock in 10 min and can be drilled, sanded and filed.
But you pay for it- bugger that.
It's $15 for 25 ml. That stuff is expensive.
I don't have shares in Permatex.
😮 Muchas gracias por esos consejos pero una pregunta y el plástico donde se echa no se derrite 👍
My current favorite plastic glue is permatex plastic weld but I'll have to give this a try. Thanks!
Es importante saber que los plásticos no son todos iguales, los hay de muchos materiales diferentes y aunque cuesta de creer, si intentas unir plásticos de diferentes materiales NUNCA se van a unir. Buen vídeo!
Well, if you liquefy the plastic bumper to repair your broken bumper, that's still fine. Thank you for sharing your knowledge. Have a nice weekend!
Friend, aviation shears or tip snips would save you some effort and time. Keep trucking,nice video.
Thank you!
it's not for all the plastic (hence you can see as he does using plastic cup for) and in case you will combine different tipe of plastic, it won't bond too much well, but for those, what can be melted by acetone or somehow reacts with (PVC, ABS, polystyren) it's nice tip, actually.
Quote: _"...what can be melted by acetone or somehow reacts with (PVC, ABS, polystyren) it's nice tip..."_
Thank you.
What would be interesting is a durability test. I once bought a two-component glue with a primer made for polyolefins, but it still didn't last very long. Reinforcing with sheet metal still works best for me.
It also works with PMMA ans SAN.
I used this along with some window screen to patch a gray water tank in a RV years ago. held better than any patch!
Gracias por compartir...saludos desde México...
A great idea for plastics that can dissolve in acetone, but YIKES! I have a very nice scar on the knuckle of my left index finger where the blade went down to the bone from doing what you are doing at 6:09.
Been there, same finger. Nearly cut it off, never the same! Always cut away from the fingers.
Facts: actually with practice it's an acquired skill, better blade control to cut towards you. i read this how they prove it to be true years ago. just be safe Bro's
I also learned the hard way, to never use the utility knife to you, I mean if it miss , straight to your finger! Always cut from you direction.
If you need absolutly to cut something, to your side direction, make sure to never hold the object like he did in the video! Hold it in a way, with keeping in mind that if it miss cut, if wont hurt your holding hand.
Dont worry, acetone can also fix that😁
La navaja nunca debe cortar hacia uno debe ser hacia afuera.
Acetone + plastic is a well known "glue" for model makers
Tweakers paradise.
Thanks for sharing
Great job, bro. Well done.
Some bumpers are manufactured with Fibre Glass materials..Some bumpers use PP or other plastic materials. Take note.
Questions about your idea here
I like it lots why not weld it ?
Will the asitone work on all plastics?
Some plastics are meant to with stand harsh chemicals like that of asitone
And about how long will it take for the slurry project to dry or cure completely?
Love the idea 😀😀💡💡!!!!!!
Polystyrene, acrylic, polycarbonate, ABS, and asorted copolymers can melt in acetone. PP plastic (Polypropylene), which is used in many things around the house and car/moto parts, doesn't melt.
Genial gracias 😮😮😮
Your Welcome! Have a nice day
Fenomenal, gracias ❤
Thank you!!! ✌️✌️✌️
very interesting.will try it thank you
Love the knife safety.
There is always one.
Can I use it to cover cracks in concrete?
Always face the cutting blade edge away from yourself
OMG....yes! I was waiting to see "in my next video we'll talk about how to bandage an amputated finger!"
Yeah agreed, the fist safety practice that I saw in this video..please cut direction away from finger 😅. ❤thanks for your video.
Opposite. It’s only possible to control blade progression when it’s closing to you. If it’s going away from you, you are weaker and have much less control on it so it’s very hazardous, and high risk of getting harm for you or others.
But it’s true his left hand is not correctly positioned, and blade movement erratic, it’s probably due to video constraint.
Always cut towards your BUDDY, not your BODY!
Everybody knows that preacher but sometimes it's not practical.
So more applicable, thanks 🙏
Do you need hardener or does it dry on its own
👍👍👍. Thanks
Bonjour, excellent travail.........c'est fantastique
La idea de hacer plástico diluido con acetona es genial lo único deficiente fue la forma como manipulates el trabajo no fue nada desprolijo se vio que estabas muy nervioso pero igual se te dan las gracias por esa buena idea saludos desde Chile
De hecho fue desprolijo, como tu forma de hablar😂😂
Can you use plastic bottles too? I do mold making & I bet too this would also work too instead of resin.
The plastic used in the video is ABS plastic, which breaks down when you add Acetone to it, resulting in the plastic sludge. Plastic bottles are likely made of Polyethylene and Google says Acetone can break down Polyethylene, but I'm unsure if it will turn it into a useful sludge like in the video.
La mezcla funcionaria?, si en lugar de acetona, se utilizara disolvente universal
Cutting with knife with the sharp blade side into you - amazing idea!
Grow up. You've been listening to Democrats for too long.
Why is the plastic container not melting?
O la cinta?
Other type of plastic
Would have helped to identify the plastics.
Probably because the container is a hdpe or something and not abs like most bumpers
ABS
Im thinking pouring acetone in a plastic cup to melt plastic might be a not so good choice of containers but it seemed to hold up for this video. Ive used this a few times when i couldnt find a piece of matching plastic type to weld in place to repair broken and missing pieces.
some types of plastic do not dissolve in acetone, so you can rest assured that the plastic cup will not dissolve.
Good tip.
Muchas gracias
Welcome!
Excellent
Thank you so much 😀
I love your repair videos 👍 But I am still working with crazy glue and baking soda which I use to fix everything :-)
Yes, It's also very good!
Is there anything else I can use besides Acetone to liquify the plastic?? Like maybe paint thinner?
You might try MEK. Methyl Ethel Ketone. It may be hard to find nowadays if I remember correctly it will melt plexiglass. Sometimes it's necessary to cut towards yourself, just don't slip. And if you do get out the super glue
@@sojogunn6249 Super hazardous stuff. MEK is extremely volatile and carcinogenic.
It is very good and how can i see it again please?!
Hit the play button?😂
جزاكم الله خيرا كثيرآ
It's okey if instead of acetone... Thinner? Could be?
Yes it can, it still dissolves some plastics
how long does it take to dry?
I've tried pa n pa+ n regular plastic. Having trouble melting. Any ideas? Same recipe. Does jar need air why you put paper under the top? Thanks
Simplemente espectacular
Thank You So Much Sir!
@@GausDIY what type of plastic (what is plastic #) did u use in the video that melts in acetone?
Great video.. thank you!
welldone, please guide silicon tubes will dissolve in action
Thanks!!!
very informative. thank you. i will try this on cracked fairings of my scooter
perfect! you will save so much money
NEVER cut TOWARD the fingers !!
Mate tnx for the video. The syringe is how many ml? 50ml?
How long does it take melt the plastic till can stir it in general as each plastic would be different?
bravissimo!!🤩
プラモデルが欠けた時に断熱材のスタイロフォームを塗装の薄め液で溶かして使ってました。発泡プラスチックなので速攻で溶けて便利ですが色が青いので塗装を前提としてしか使えなかったです笑
Ok Friend!!!! ❤️❤️❤️
O yeah that total genius straight up awesome 👍 thanks .
Nice idea 😊
Nice ❤❤
Many many thanks
Gracias por compartir los conocimientos...en caso que no tengas paga comercial...
La pega de plástico fuerte en Venezuela solo vale 3 dólares y es muy fuerte quiero saber si estás soldaduras son igualmente bien fuertes.?
La acetona es igual o más costosa que esa pega fuerte...
Do you mean super glue (cyanoacrylate)? It's about $1 in my currency, while acetone is $5. But for those price, you get 25 ml of super glue, and 1 liter of acetone.
Bravo.
How strong are the resulting patch ups?
W O W !!! its really??? Nice!!! thanks mate!! :)
Glad you like it! ❤️❤️❤️
I just use baking soda and super glue. Instant fix with no waiting for hours at end for acetone to do its thing with plastic.
You will be disappointed to know it turns into powder in humid environment within 6 months. I learnt it the hard way. Living in tropics.
Best there is buddy. Not alot of people know about the super glue and baking soda. Better than 2 part apoxy and zero wait time.
I use detergent example Tide with super glue will be like stone.
@@bwtompkins3649how do you do it? Do you have vidéos for that?
Agree the bond is hard as rock instant also super glue with cigarette filter works like a charm
Super genial
Very good
Thanks
アセトンで溶かしたプラスチックは乾いていても上から塗装すると塗料が乾いてからも浮いてくるんですよね。
Genius!
Si se ve bien pero porque la acetona no derrite al embase de plástico en el cual se hace la fucion del otro plástico?
Gracias por hacer una muy buena pregunta. La acetona sólo derrite plásticos a base de poliéster, pero no puede derretir otros plásticos.
This works equally well with PMMA/Acrylic/Perspex as it does with PC as shown. I have been doing this to make specialty mixes of PMMA weld. Be advised that with PMMA or PC you want to make your donor chips as small as possible. With softer plastics such as PC, you can use a cheese grater or with harder plastics such as PMMA you could use a metal file. Beware that with PMMA, crazing is possible with extruded sheet. Best results are found when welding cast PMMA.
Can you specify the types of plastic in terms of the grading code (1-7) that is stamped on which work? Also what is the percentage of acetone that you need? Will regular nail polish remover work?
@@maxinvictus Well that was interesting. I never checked until now but it's surprising that PMMA is actually #7. That's a shame too because it is actually fully recyclable with multiple cheap and safe pathways. You may find PMMA sold as Plexiglass in US/Canada, Perspex in Europe, or worldwide as Acrylic (as in Acrylic paints or Acrylic resin).
As for w/w I usually just eyeball it but you can definitely be more scientific about it. Start around 1:1 and work your way up or down as needed. Dissolving takes time. Can take several days. Use a container safe for acetone such as glass or PP (#5).
Nail polish remover should be fine so long as it does not contain any oils, fragrances, dyes, or other chemicals.
Well managed camera work.
Where can i get acetone please?
A shop
Is this a mold injection molding
Can PVC be used?
No strength tests??
自分もアセトンでABS樹脂を溶かして自動車内装のABS樹脂パネルを修正したことがあります。
質問ですが、動画始めの方でアセトンで溶かしているプラスチック樹脂は何でしょうか？ （ABS樹脂 or ポリプロピレン樹脂 or ウレタン樹脂）
また動画中の車のバンパー、ファン、バッテリーカバーのそれぞれの部材が何のプラスチック樹脂か教えていただけませんでしょうか？
Awesome
Well done. Looks interesting but howcome acetone does not harm the plastic jar and the plastic syringe?
because it is a type of plastic that does not dissolve in acetone, acetone only mixes plastics containing Polyester
Very interesting
how long the plastic dry
شكرا على هذا الفيديو....
Se puede lijar?
재료를 만든후 얼마나 보관이 가능한지도 알려주면 더 좋을듯 하네요.
I have to wonder why the acetone didn't affect the plastic water bottle he had it in or the plastic jar he dissolved his mixture in?
They were probably polypropylene or polyethylene acetone has no effect on those plastics
There's MANY kinds of plastics.
Bonjour, cela paraît vraiment intéressant, il faudra que j'essaye.
- Mais l'usage de l'acétone (1:02), doit s'accompagner de nombreuses précautions et c'est de votre responsabilité de le signaler clairement. On voit bien vos gants, mais on ne sait pas si vous travaillez dans une pièce aérée par exemple, loin de toute flamme, etc.
Par exemple vous pourriez écrire : "avant d'utiliser l'acétone, veuillez prendre connaissance des précautions d'emploi signalées par le fabricant."
Yes Bro! I'm verry happy when read your comments! I have use a fan and a mask! My workplace is very well ventilated! Thank you so much!!!
buena idea pero a mi ver se le podrian hacer unos pequenos orificios en ambos lados a lo largo de la linea de rotura para que el plastico tuviera mas fijación
¡Gracias por tu idea!
Is there a list on which types of plastic you can use this technique on, and those it doesn't work with?
PS plastic (also known as Polystyrene) and ABS plastic are soluble in acetone, ester, ethylene dichloride, these types of plastic are often produced in plastic foam food containers, plastic CD, DVD cases, children's toys, computers, hair dryers and kitchen appliances. Insoluble plastics include PP, PET, HDPE, PVC, LDPE
How come the container didn't dissolve??
Because it is an olefin like polyethylene or polypropylene, they have great chemical resistance compared to the abs bumper.
ماهو السائل المضاف للبلاستيك لجعله يصبح سائلا.
Brilliant
did you miss the superglue baking soda videos all over the place?
Aquí, en Argentina, es bastante difícil conseguir acetona técnica por su alta toxicidad (fumar no está prohibido). Para estos arreglos pequeños yo uso grafito (el que se usa para lubricar cerraduras) y cianocrilato. El resultado es fortísimo y se pega a cualquier plástico hasta los pinchazos en colchones inflables...
Thank you for sharing. I'm very happywwhen read your comments!! 😊😊
La acetona no derrite el vaso de plástico??
La acetona no derrite los plásticos echó de polypropylene o de polyethylene.
Maşallah süper
Ah evet, iltifatınız için teşekkür ederim! Size her zaman sağlık diliyorum
How much acetone with how much old plastic ???
Where is acetone available?
hardware stores, hobby stores, art supply, etc it's very common
Ahora resulta que en los comentarios ,todos conocían está técnica,pero ninguno subió un video, como hizo este sr,gracias por tu video.
Yes, the world is full of keyboard know-it-alls. There are not so many that do, but many that say they do.
c'est super de réparer comme ça mais où trouver du plastique liquide
Vous pouvez fabriquer votre propre plastique liquide en utilisant de l'acétone, un diluant à peinture combiné avec du plastique ABS.
Klasse muss ich gleich mal probieren Plastik kleben ist immer heikel
El del ventilador del fancooler me deja pensativo si al derretir él plástico como líquido perdería propiedades de resistencia, por ello no sé los expertos aquí me guíen si, sería conveniente mezclar ese plástico líquido con otro componente químico y así tenga mayor durabilidad, igual el video me está dando la idea para reparar una pieza de notebook, en especifico el mecanismo de la tecla el cual se partió un pasador o lengueta.... Intentaré a ver qué pasa ojalá funcione por muy largo tiempo... Gracias por el video
Hola buenas tardes, una pregunta que tipo de plástico debe de ser porque yo tome unas tapaderas de refresco le puse acetona y no se hizo plástico líquido.
Muy bien
If the acetone dissolves plastic, how can the process be carried out in a plastic container?
Is it possible to put it on transparent red acrylic and get a transparent red color and then use it for repairs, and the result will be the same color as the piece that you repaired ????????????... Please reply.
It's a little off but acceptable.
@@GausDIY Please, what is the correct method for gluing red and clear acrylic?
which is better acetone or thiner PU .. ??
I don't have the experience to compare it
Me gustó mucho tu video , disculpa mi sugerencia, tu no explicaste que clase de plástico estas usando, hay plástico que el acetona no lo deshace, porque hay botellas de plástico que contienen acetona, en mi caso si se que clase estas usando, pero las demás personas, por ejemplo las sillas de plástico, esas no se pueden hacer líquido, saludos.