This Gibson Sam Bush mandolin has serious neck issues. Stick around to see how I tackle the problem. Support: / rosastringworks Website: www.rosastring...
Jerry, thank you for demonstrating once again the difference between a luthier and a master luthier. Also, all of my thanks for taking the time to share your craft with us. I am looking forward to see how you finish the redesign and reconstruction.
Sorry you don't like my music but most folks seemed to especially the fact that I sell lots of it on my website. In fact you may have to go somewhere else if you don't like it because this was just such a large video I didn't have Room for it itll probably back in episode number 2
@@RosaStringWorks I like your music. It's just that I have watched pretty much every one of your videos (some of them multiple times) and I've heard all your songs again and again. No offense intended.
Having watched all of your repair videos, it looks to me that this repair had the most potential for catastrophe of any repair I have ever seen you do. Your slow approach and patience really paid off. Looking forward to the completed project.
A man that knows the sound of a file sandpaper or scarper is only music to the operator of said tools, Thank you for saving us with the sound editing on this!
'You don't go Hercules on that'...love the phrase! What's amazing is that you tell us what you see, and what you're thinking on a problem to correct. Thanks my friend.
Now THAT was my kind of episode. A good chunky one showing how Jerry solves problems. I didn’t want it to end. Fabulous. I can’t wait for part 2. Nice job.
Id bet Forthwith Tx is right that one shop or another (or the owner) torqued the nut so hard that the truss rod not only pulled through the neck material ,but also spun the rod over, and since the anchor was round , it just spun the whole assembly (once the anchor ran out of threads) just happening to end up at about 180 degrees backward. The anchor had a round collar because it was inserted through a drilled hole from the neck block or neck joint. Then , of course, they had to cut off the extra truss rod exposed at the headstock. Then they took the $$$ and ran away. The original design was faulty, and someone else made things worse. Your patience and intuitive analysis is saving the day. you have mentioned before that one job or another was the weirdest ,or your best, but this one is my favorite and I take my hat off to you...I hope the customer appreciates you talent , skill , and determination as much as I do. Thanks
The 180 rotation is kinda hard to believe, because the neck would have bent sideways horribly as that curved rod went through 90 degrees with the amount of curve on it. It would be interesting to see if there's any sign of the slot being chewed up in the middle. The bend on the rod would tend to make it stop at 180 or 0. But whatever happened a truly horrendous amount of force must have been put on the truss rod. I think I tend to favour some kind of major brain fade at the factory and the rod being upside down from new. Reason is that we know that a completely unreasonable amount of force was used on the rod, and the rod being upside down and completely non functional is a reason why someone might have put stupid amounts of force on it.
I'm just glad this mandolin came to your shop instead of mine lol had it came here = BIG money! strange they put the truss exactly backwards from how it should have been. great work here as always my friend! good luck with this one!
@@AmosBHaven I have to agree. With as much bend as is in that rod, to twist it 90 degrees would have blown out the side, much less get it all the way to 180.
I wish I could press the like button many more times to express how much I like this video! Of course I can do that, but the thumbs up goes only on and off. This repair job may be a pain in the *** for you, but it does make a very entertaining video. Can’t wait for the next part.
Two of the most wonderful uploaders begin their videos in much the same way . . . "Hello my good and faithful friends" and "Hi there, gang". That says all we need to know about them as people. (Just hope Jerry doesn't start throwing dogs around, though!)
I liked the excitement in your voice when that baby started to come out. “Oh, yeah! Oh! Yeah!” Awesome. Don’t make us wait too long for the next episode. HaHa
Sure liked this one, especially you commenting/criticizing your choices and work (and others 'work'). Nice job, can't wait to see the next vid on this. Thank you ever so much for the joy your videos give me!
In all the years of being a subscriber to your channel, never have i heard such uncertainty in your voice about a project.But when i have heard trepadation in your tone i always know you'll get the job done. I have learnt lots of techniques from you Jerry determination and passion are qualities you exude in buckets. An instrument which has had treatment at the RSW is a very lucky instrument indeed and without watching through to the videos conclusion i have every confidence you'll fix it. You always do.You fixed more Gibsons than soft Mick they aught to be ashamed of themselves lol. Thanks Jerry. DLTBGYD.
I have to hand it to you on this one Jerry, it was a difficult repair, yes, but your presentation on this one was excellent. Every time I started thinking "why on earth is he doing it that way?" you gave us the answer.
Thanks for the great video! I love watching you solve problems. Seeing how each challenge is overcome is interesting to me, most people would have just given up!
How to make a Saturday night a Great one: Playing music at the Square in Mt View Ar. then coming home to see my favorite channel has a new Post! - thanks Jerry!
When I walked mine... I carried a S&W, M&P, .40. No one ever touched my dag that was unapproved... They'd a paid a heavy price for whatever they got from even touching my dog! 🤓
There is no substitute for experience, and it shows in your work. What a great environment for Kaleb to learn in and be associated with. Never a dull moment at Rosa String Works. Keep the great content coming, and my best to Kaleb as well.... Joe
I have a Sam Bush mandolin and this video hurts my heart. I can't believe anyone would beat up an instrument that retailed for almost $10k. Furthermore, the wide neck is a feature on that model. Carving it down to 1 1/16th is the likely reason that neck has problems. Considering how many nice mandolins that are out there that already have a traditional neck I can't believe shaving the neck was best means to an end. I'm only 25 minutes in so I hope this has a happy ending.
You're on the right track for sure. I was amazed that the truss rod was upside down! What you're doing looks pretty destructive, but as you know, you can repair any damage caused by pulling the rod. The "damage" is in an area that will never be seen. Good work. Looking forward to part 2.
It was my nose that allowed me to be the chef that i was. I can taste each seasoning that is added to a dish. My nose is good enough that i can tell when pasta is done by smell alone. My wife thinks i'm a mutant of some kind because of it. So i understand completely about having a good nose and sense of taste.
I can't imagine anyone with a nut-driver, able to cause the end of that truss rod to move that much through solid wood unless they used a torque wrench driver to do it. I mean that is unreal and it took far more strength than I could impart to it. The truss rod being upside down is another mystery as well. I just don't think it was anybody with any experience in such things could make such a mistake. The CA glue may have been an effort to anchor the end of the truss rod in place. I remember you showing the truss rod during a shop talk but it just didn't register, how serious a problem it had been. Great video, Jerry. Thanks alot!!!
Watched the entire vid..you had so many issues with this one! Love your mindset and your spirit. I know it is none of my business but knowing what you did on and off camera I would love to see the bill $$$ Throw dog under the strings...love it
Very interesting neck truss rod situation! About 20 years ago a came across a Gibson Mastertone plectrum banjo with just the same troubles. I wish I'd had the skills to repair it even half as well as you have this mandolin.
Good video Jerry. Having watched the truss rod shop talk, and you showing that particular truss road, really highlighted the issues surrounding the rods. I would imagine it would have taken a lot of force to pull the rod the 1/4" or so thru the wood (Maple at that), despite the fact that it was installed (presumed) incorrectly. It definitely looked like Ker Ap. :-). Will wait patiently for the fix. Thanks for the content.
I have done a few old mandolins that didn't have truss rods and had to remove the fretboard and level the neck itself with a leveling beam. Mandolins, because of the double course strings, have SOOO much string tension, the necks take punishment. The fretboards need a bit of sanding to blend them back to the new neck shape, but it makes the instrument playable again, which is the important thing. Love your videos, Jerry. Great work.
Bravo Jerry!!! I just watched the part where you pulled that truss rod out 1 hour into the video! I enjoyed watching you figure this out and especially the bent screwdriver to pry it out. I was shaking my head all along wondering what you'd do.
The twist is visible. I actually thought I saw it when you were showing the underbow, and I wondered what was wrong with me when you were talking underbow, and I was seeing a twist! 😊 Actually, you're not alone with your reaction to CA glue. Quite a few people (number wise - percentage is pretty low) have the same issue. Your heightened senses could mean your reaction is more than others with the same issue. Have you ever thought about being a professional wine taster? Sharp sticks notwithstanding, remind yourself that it takes a special person to handle a "problem child" 😊
It is no wonder three other shops couldn't fix this mandolin with that truss rod in upside down. Trust Jerry to Work through all the problems and find the underlying cause.
and That Folks is why you send your instruments to Mr Rosa. Another great video, roll on episode 2. Miss your music though. If I could have my way I would have a Best of Jerry playing and singing video and a Metal detector Video ( Jerry touched on his love for metal detecting a while back) Thanks as always . Danny
The owner had the neck narrowed down in the past. That’s a clue. Here’s my hypothesis... Whomever did the neck narrowing work, removed both the fingerboard and truss rod in the process. No idea how he got the truss rod out, but I feel pretty sure Gibson doesn’t use CA glue in their mandolin building process. So the presence of CA glue in the truss rod “plug” and under the fingerboard, supports that assumption. Somehow, when he put everything back together, he mistakenly reinstalled truss rod backwards. From there on, the owner and multiple luthiers have been cranking on that truss rod, trying to correct the underbow. However, tightening the backwards truss rod only made things worse. Given how hard they must have tightened that to pull the rod forward, the rod also likely put a twisting stress on the neck, which over time, caused a permanent twist in the neck. Another example of a simple error during an repair/assembly process, that resulted in major damage and expensive repairs. My $0.02...
I searched the patent, here’s what I found. patentimages.storage.googleapis.com/4d/57/18/4cc57793b2f981/US1446758.pdf P.S. FYI: For an invention to be patentable, it does not need to be the most efficient, effective, or perfected form of a particular use (whether it is a medication, a piece of software code, or a machine). It merely needs to work as described.
I searched the patent, here’s what I found. patentimages.storage.googleapis.com/4d/57/18/4cc57793b2f981/US1446758.pdf P.S. FYI: For an invention to be patentable, it does not need to be the most efficient, effective, or perfected form of a particular use (whether it is a medication, a piece of software code, or a machine). It merely needs to work as described.
these are the type of jobs that give the greatest job satisfaction , not usually the best paying but so good when the end result is the correct fix. great work Jerry
I saw the twist when you first showed us , but thought maybe it was the camera . Boy was I surprised that you saw it too. That baby looks like a banana neck mando.Hahaha .Keep at it,it will be fine . You always make fine videos on your craft . Thanks🎸
Bob, I saw the twist also, & thought maybe it was just the way that Jerry was holding the Mandolin, since he didn't mention it, at that point. Yeah, that neck DEFINITELY has several issues!! 🙂
The sign of an Master Craftsman, was just exhibited again... Jerry your the Man!!.. knowing how to get out of crack, before you got into it... a true sign of a Master Craftsman
This is the first video I’ve saw on your channel. I hope to build my first electric guitar and many guitars afterwards very soon. Thank you for making these videos.
I've untwisted necks on banjos that I can take the neck off. WIth a mandolin taking the neck off is not so easy. It also puts the finish at risk because it's a high temperature operation but if you keep the oven below 250 degrees it is usually safe.
If I worked on a neck that had some dips in it after removing the fingerboard, I think I'd take a few shavings off another maple board with a block plane and use the shavings to build up that dip, then sand flat.
These videos are like a movie version of Zen and the Art of Motorcycle Maintenance
Jerry, thank you for demonstrating once again the difference between a luthier and a master luthier.
Also, all of my thanks for taking the time to share your craft with us. I am looking forward to see how you finish the redesign and reconstruction.
Many many thanks to whoever put this video together without music. These videos are so much more enjoyable this way!
Sorry you don't like my music but most folks seemed to especially the fact that I sell lots of it on my website. In fact you may have to go somewhere else if you don't like it because this was just such a large video I didn't have Room for it itll probably back in episode number 2
@@RosaStringWorks I like your music. It's just that I have watched pretty much every one of your videos (some of them multiple times) and I've heard all your songs again and again. No offense intended.
Having watched all of your repair videos, it looks to me that this repair had the most potential for catastrophe of any repair I have ever seen you do. Your slow approach and patience really paid off. Looking forward to the completed project.
A man that knows the sound of a file sandpaper or scarper is only music to the operator of said tools, Thank you for saving us with the sound editing on this!
I love watching the problem solving. This is good stuff for us amateur luthiers. Thanks!
amen
"You could throw a dog under those strings!" That was hilarious, Jerry!
My best friend has yorkies. 😂😂😂😂😂😂😂😂
@@nancymilawski1048
This was room enough for a Great Dane.
@@zapa1pnt Or a Dawg...
I got you all beat. I could throw my parrot under those strings and he'd fly through, flapping wings and all!
'You don't go Hercules on that'...love the phrase! What's amazing is that you tell us what you see, and what you're thinking on a problem to correct. Thanks my friend.
Can’t wait for episode 2!! That thing was a MESS
Now THAT was my kind of episode. A good chunky one showing how Jerry solves problems. I didn’t want it to end. Fabulous. I can’t wait for part 2. Nice job.
WOW! great work Jerry. I'm always amazed at how fearless you are in jumping into the deep end on these repairs. This was a great video.
Id bet Forthwith Tx is right that one shop or another (or the owner) torqued the nut so hard that the truss rod not only pulled through the neck material ,but also spun the rod over, and since the anchor was round , it just spun the whole assembly (once the anchor ran out of threads) just happening to end up at about 180 degrees backward. The anchor had a round collar because it was inserted through a drilled hole from the neck block or neck joint. Then , of course, they had to cut off the extra truss rod exposed at the headstock. Then they took the $$$ and ran away. The original design was faulty, and someone else made things worse. Your patience and intuitive analysis is saving the day. you have mentioned before that one job or another was the weirdest ,or your best, but this one is my favorite and I take my hat off to you...I hope the customer appreciates you talent , skill , and determination as much as I do. Thanks
The 180 rotation is kinda hard to believe, because the neck would have bent sideways horribly as that curved rod went through 90 degrees with the amount of curve on it. It would be interesting to see if there's any sign of the slot being chewed up in the middle. The bend on the rod would tend to make it stop at 180 or 0. But whatever happened a truly horrendous amount of force must have been put on the truss rod. I think I tend to favour some kind of major brain fade at the factory and the rod being upside down from new. Reason is that we know that a completely unreasonable amount of force was used on the rod, and the rod being upside down and completely non functional is a reason why someone might have put stupid amounts of force on it.
I'm just glad this mandolin came to your shop instead of mine lol had it came here = BIG money! strange they put the truss exactly backwards from how it should have been. great work here as always my friend! good luck with this one!
Judging by how MUCH "bend" that was in that truss rod? It COULDN'T have been installed correctly at the factory.
@@AmosBHaven I have to agree. With as much bend as is in that rod, to twist it 90 degrees would have blown out the side, much less get it all the way to 180.
Absolutely love this video. You, sir, are a skilled man of heroic proportions
I wish I could press the like button many more times to express how much I like this video! Of course I can do that, but the thumbs up goes only on and off. This repair job may be a pain in the *** for you, but it does make a very entertaining video. Can’t wait for the next part.
I can see the twist very clearly. Thank you! Nobody else takes the time and effort to show these things.
Two of the most wonderful uploaders begin their videos in much the same way . . . "Hello my good and faithful friends" and "Hi there, gang". That says all we need to know about them as people. (Just hope Jerry doesn't start throwing dogs around, though!)
you finally found the right (but unusual ) way to pull off the rod ,Genius Jerry ,congratulation
I liked the excitement in your voice when that baby started to come out. “Oh, yeah! Oh! Yeah!” Awesome. Don’t make us wait too long for the next episode. HaHa
You sure used ingenuity to remove that truss rod Jerry! Good work!
You sir, have more patients and guts - very brave indeed!!! Great job!!!
Sure liked this one, especially you commenting/criticizing your choices and work (and others 'work'). Nice job, can't wait to see the next vid on this.
Thank you ever so much for the joy your videos give me!
In all the years of being a subscriber to your channel, never have i heard such uncertainty in your voice about a project.But when i have heard trepadation in your tone i always know you'll get the job done. I have learnt lots of techniques from you Jerry determination and passion are qualities you exude in buckets. An instrument which has had treatment at the RSW is a very lucky instrument indeed and without watching through to the videos conclusion i have every confidence you'll fix it. You always do.You fixed more Gibsons than soft Mick they aught to be ashamed of themselves lol. Thanks Jerry. DLTBGYD.
I have to hand it to you on this one Jerry, it was a difficult repair, yes, but your presentation on this one was excellent. Every time I started thinking "why on earth is he doing it that way?" you gave us the answer.
This one more compelling than anything TV tonight ! Impressive work.
Very nice job!!! I'm glad you went as far as you did!
Thanks for the great video! I love watching you solve problems. Seeing how each challenge is overcome is interesting to me, most people would have just given up!
How to make a Saturday night a Great one: Playing music at the Square in Mt View Ar. then coming home to see my favorite channel has a new Post! - thanks Jerry!
sitting here with my coffee on a miserable Sunday morning in the UK. Thinking to myself you’ve got a humdinger there sir.
Anyone with a Yorkshire terrier within a mile of the Rosa string works ,had better keep walking ,,fast
When I walked mine... I carried a S&W, M&P, .40. No one ever touched my dag that was unapproved... They'd a paid a heavy price for whatever they got from even touching my dog! 🤓
There is no substitute for experience, and it shows in your work. What a great environment for Kaleb to learn in and be associated with. Never a dull moment at Rosa String Works. Keep the great content coming, and my best to Kaleb as well.... Joe
Well, I’m hooked for sure on this repair! Can’t wait to see the next installment!!
Good evening Jerry you no I've been watching you for a long time and this was by far one of your best God bless you and your family and Caleb
I have a Sam Bush mandolin and this video hurts my heart. I can't believe anyone would beat up an instrument that retailed for almost $10k. Furthermore, the wide neck is a feature on that model. Carving it down to 1 1/16th is the likely reason that neck has problems. Considering how many nice mandolins that are out there that already have a traditional neck I can't believe shaving the neck was best means to an end. I'm only 25 minutes in so I hope this has a happy ending.
You're on the right track for sure. I was amazed that the truss rod was upside down! What you're doing looks pretty destructive, but as you know, you can repair any damage caused by pulling the rod. The "damage" is in an area that will never be seen. Good work. Looking forward to part 2.
Jerry no matter what problems you run in to , you have them solved immediately, love your videos.
It was my nose that allowed me to be the chef that i was. I can taste each seasoning that is added to a dish. My nose is good enough that i can tell when pasta is done by smell alone. My wife thinks i'm a mutant of some kind because of it. So i understand completely about having a good nose and sense of taste.
I can't imagine anyone with a nut-driver, able to cause the end of that truss rod to move that much through solid wood unless they used a torque wrench driver to do it. I mean that is unreal and it took far more strength than I could impart to it. The truss rod being upside down is another mystery as well. I just don't think it was anybody with any experience in such things could make such a mistake. The CA glue may have been an effort to anchor the end of the truss rod in place. I remember you showing the truss rod during a shop talk but it just didn't register, how serious a problem it had been. Great video, Jerry. Thanks alot!!!
Thank you so much for making this documentary. I am enjoying it very much!
Watched the entire vid..you had so many issues with this one! Love your mindset and your spirit. I know it is none of my business but knowing what you did on and off camera I would love to see the bill $$$
Throw dog under the strings...love it
I can see that bow all the way from Niagara Falls. Thank you for sharing.!
I was hoping at the beginning of the video that you would come to replacing the rod in the neck.Great job. can't wait to see the next video.
Wow Jerry, you certainly get all the challenging ones! I'm looking forward to seeing how this turns out.
Nice work Jerry... You were right...
I just love your work, you are a master crafter luthier, I learn so I hope from you friend.
Very interesting neck truss rod situation! About 20 years ago a came across a Gibson Mastertone plectrum banjo with just the same troubles. I wish I'd had the skills to repair it even half as well as you have this mandolin.
total entertainment, absolutely brilliant one of your best so far
This is more than entertainment.
This is education/instruction.
Good video Jerry. Having watched the truss rod shop talk, and you showing that particular truss road, really highlighted the issues surrounding the rods. I would imagine it would have taken a lot of force to pull the rod the 1/4" or so thru the wood (Maple at that), despite the fact that it was installed (presumed) incorrectly. It definitely looked like Ker Ap. :-). Will wait patiently for the fix. Thanks for the content.
I have done a few old mandolins that didn't have truss rods and had to remove the fretboard and level the neck itself with a leveling beam. Mandolins, because of the double course strings, have SOOO much string tension, the necks take punishment. The fretboards need a bit of sanding to blend them back to the new neck shape, but it makes the instrument playable again, which is the important thing. Love your videos, Jerry. Great work.
Enjoyed this video. Look forward to part 2. Thanks Jerry.
Jerry your problem solving skills are on point
Bravo Jerry!!! I just watched the part where you pulled that truss rod out 1 hour into the video! I enjoyed watching you figure this out and especially the bent screwdriver to pry it out. I was shaking my head all along wondering what you'd do.
As a beginner guitar player, knowing how flat a fingerboard should be is extremely helpful. Thanks. Usually I find that if a guitar is
The twist is visible. I actually thought I saw it when you were showing the underbow, and I wondered what was wrong with me when you were talking underbow, and I was seeing a twist! 😊
Actually, you're not alone with your reaction to CA glue. Quite a few people (number wise - percentage is pretty low) have the same issue. Your heightened senses could mean your reaction is more than others with the same issue. Have you ever thought about being a professional wine taster?
Sharp sticks notwithstanding, remind yourself that it takes a special person to handle a "problem child" 😊
It is no wonder three other shops couldn't fix this mandolin with that truss rod in upside down. Trust Jerry to Work through all the problems and find the underlying cause.
One of your best videos in my opinion.
Neck relief. You covered that in first few seconds. Moving along......
Love watching an artisan at work. This is great stuff.
What a job, you are right on track!
Now that was a lot of work. Great job!!!
and That Folks is why you send your instruments to Mr Rosa. Another great video, roll on episode 2. Miss your music though. If I could have my way I would have a Best of Jerry playing and singing video and a Metal detector Video ( Jerry touched on his love for metal detecting a while back) Thanks as always . Danny
Simply love the way you work.
The owner had the neck narrowed down in the past. That’s a clue. Here’s my hypothesis...
Whomever did the neck narrowing work, removed both the fingerboard and truss rod in the process. No idea how he got the truss rod out, but I feel pretty sure Gibson doesn’t use CA glue in their mandolin building process. So the presence of CA glue in the truss rod “plug” and under the fingerboard, supports that assumption.
Somehow, when he put everything back together, he mistakenly reinstalled truss rod backwards. From there on, the owner and multiple luthiers have been cranking on that truss rod, trying to correct the underbow. However, tightening the backwards truss rod only made things worse. Given how hard they must have tightened that to pull the rod forward, the rod also likely put a twisting stress on the neck, which over time, caused a permanent twist in the neck.
Another example of a simple error during an repair/assembly process, that resulted in major damage and expensive repairs. My $0.02...
Your analysis makes perfect sense to me.
I searched the patent, here’s what I found. patentimages.storage.googleapis.com/4d/57/18/4cc57793b2f981/US1446758.pdf
P.S. FYI:
For an invention to be patentable, it does not need to be the most efficient, effective, or perfected form of a particular use (whether it is a medication, a piece of software code, or a machine). It merely needs to work as described.
With all the "things" we've seen, from Gibson, over the
years, I have little doubt, this was done at the factory.
I searched the patent, here’s what I found. patentimages.storage.googleapis.com/4d/57/18/4cc57793b2f981/US1446758.pdf
P.S. FYI:
For an invention to be patentable, it does not need to be the most efficient, effective, or perfected form of a particular use (whether it is a medication, a piece of software code, or a machine). It merely needs to work as described.
It had to done incorrectly at Gibson. Someone was hungover and put in the truss rod upside down. Jerry is too much of a gentlemen to say it.
I would pay that eyes closed and hands down man... you know what you're doing!
10 out of 10 for perseverence..!! Well done..!! 👍
Nice work, will be interesting to see how you straighten the headstock.
these are the type of jobs that give the greatest job satisfaction , not usually the best paying but so good when the end result is the correct fix. great work Jerry
That was a tester Jerry, well done👏👏👏👏👍🇬🇧😊
Absolutely fascinating video. Thanks for sharing it with us all.
Brilliant video Jerry Thanks for making it 🇬🇧
It was worth it, Jerry. This was a very enjoyable video.
Fantastic video! Your problem solving is just amazing to watch! Brilliant!!! :-)
Cant wait for the next vid on this fix...really got into this one..
Amazing Jerry 😎
I saw the twist when you first showed us , but thought maybe it was the camera . Boy was I surprised that you saw it too. That baby looks like a banana neck mando.Hahaha .Keep at it,it will be fine . You always make fine videos on your craft . Thanks🎸
Bob,
I saw the twist also, & thought maybe it was just the way that Jerry was holding the Mandolin, since he didn't mention it, at that point.
Yeah, that neck DEFINITELY has several issues!! 🙂
Saw it too and I thought: well, my carpenter's eye is getting better and better!
Jerry you are not alone with the taste and smells. I have the same problem.
Experience meets tenacity. !!
Amazing work & knowledge 👍😘
This mandolin finally met the master.
Thats CA in a nut shell!
I can’t wait to see the next installment!!
huge twist. easily seen with the naked eye... wow...
The sign of an Master Craftsman, was just exhibited again... Jerry your the Man!!.. knowing how to get out of crack, before you got into it... a true sign of a Master Craftsman
Trying to understand the physics of the rod and how it does affects the fret board, very good explanation!!!
Hey Jerry,hey Caleb,Sam,bush mandolin,wow,soul eating my nerves.But great job,very interesting.Greatings from Rolf,southgermany,town Heilbronn
Great work Gerry!
Look forward to part 2, and also the next episode of the 12 string
This is the first video I’ve saw on your channel. I hope to build my first electric guitar and many guitars afterwards very soon. Thank you for making these videos.
I've untwisted necks on banjos that I can take the neck off. WIth a mandolin taking the neck off is not so easy. It also puts the finish at risk because it's a high temperature operation but if you keep the oven below 250 degrees it is usually safe.
Growing that second set of hands looks really useful.
fascinating stuff Jerry thanks for sharing
Fasenating video - enjoying it so much!
Crikey - that is some sort of twist! Love your straightedge by the way.
This must have been installed on a late friday afternoon.........upside down. can't wait for the next episode jerry! a cliffhanger
You're the MAN Jerry 👍💯
wOw,,,,,,,,,,,that was a lot of work,,,,,,,,,,my hats off to you..........!!!!!!!!!
If I worked on a neck that had some dips in it after removing the fingerboard, I think I'd take a few shavings off another maple board with a block plane and use the shavings to build up that dip, then sand flat.
Can’t wait for Part II!
you might even be able to throw a pit bull under those strings Jerry!