Loved the tacky '80s teen movie music for the wind tunnel montage. So many fully developed bits to further the "realism" of this segment. Plus the instant bodywork installation first. Well Done Bois!
If you guys haven't already started this, another option instead of aluminum sheet is Alumalite, or something similar. It's basically the aluminum version of cardboard, with a corrugated layer between thin aluminum sheets. It will be much more rigid and probably lighter (depending on thickness) than the solid sheet you'd end up using. I've always heard you can usually get it fairly easily locally by talking to sign shops. A lot of people use it for splitters and flat bottoms, so if you're keeping the panels flat ish, it'll probably be a great material for that. Just a thought.
@@MrPuddinJonesmost definitely, any time a cop sees a junker car or something missing panels it’s a red flag, kinda judging in a way but sometimes it really isn’t the person drivings car.
that rear wheel surely sticks out quite a lot and since it's spinning it'll create quite the drag, might wanna have a little extension to the side to lead more air around that tire
1mm aluminum is thicker than you need. 26-28 Guage would probably be fine, especially if you add some bead-rolls for extra rigidity. Also the rear end should be pointy or teardrop shaped. When the back is truncated or flat, it creates a low pressure pocket that sucks the car rearward. Most people don't think about the back of the car when they think about aerodynamics, but how the air separates or comes off of the car is just as important as where it first meets the front of the car.
@@josephquinto5812 yes it would, but the effect is very minimal on the scale of a car. I believe mithbusters did an episode on it; the difference was negligible.
how about carbon fiber? Get some foam, shave it to shape for the sides and top, lay down sheets of carbon fiber and epoxy. Wait for cure, trim to shape. Should be lighter, quieter, and less flexy than aluminum.
The entire video had me cracking up I loved the theatrics involved and the music at the end you guys keep stepping it up love what y’all are doing with the channel
So cool to see all of the different projects you are working on. I subscribed because I saw the E-Roy content but I still enjoy your other content too. Keep up the great work.
Huge thumbs up for the epic 80's music montage at the end. So Funny. Love the sense of humor. The 80's were pretty great though. Kids today will never be as free as we were back then. Go out after breakfast on our bikes or skateboards and come home when it gets dark. No phones to call us, no parents thinking we were kidnapped, just me and my bro's having fun all day. That was true freedom.
Kyle i have to congratulate you. As an EV hater i never ever watch anything to do with EV`S of any description. However, ive watched every video of yours on this EV & enjoyed each & every one.
@@MODElAIRPLANE100I get what he’s saying. Hate is a strong word I think. But I dislike EV’s for the purpose of there’s no soul. It’s not “living and breathing” if you know what I mean. Charge up, hit throttle, chirp of the tyres sound of air moving…… The process of what Kyle has done or is doing to this thing is more interesting than just an EV car that goes fast.
I love your dedication to making the Plaid faster. Rear lower control arms that adjust to have the tire sit flat to the ground near full suspension compression helped my Plaids launch. The Plaid motor has so much more HP potential, but it's limited by the cells voltage sag. I'm adding a high-C rate pack to mine in parallel with the OEM pack to beat your Plaids time with OEM interior. 😊
How many kWh does a single run pull? There could be a huge weight saving and power boosting for E-Roy if they made a custom batterypack from LiFePO4 cells or something like that and ditch the oem battery. If they sell the battery they could easily build a new one for that price. Need to have a brainiac to sort out all the safety systems that are included in the oem battery though.
@@PPekka I think LTO cells are more suited for loads like this. But ditching OEM battery will make this project an order of magnitude harder. You would need to change/reprogram/jailbreak motor controllers as they will not cooperate on custom battery without changes. A single run should not consume more than 1000KW * 10 seconds (1/360th of hour) = 2,77(7) KWH
@@darekmistrz4364 just need to add the LTO cells on top of the OEM pack as the LTO cells don't even need a BMS and will dump loads of power when needed and the oem pack will also keep the LTO's charged as they don't have much run time on them
@@PPekka It's just a couple kWh per run. The booster battery pack doesn't need to be large or heavy. 150C-rate cells exist for drone racing that enable the whole booster pack to be under 100lbs.
Nice work boiz 👌 love all your content, turns a boring day at work to a great day when I watch your vids. Can’t wait for the 4x4 pulls from the Subaru. Just with the Tesla, did you think about that thin perspec material like the windows on the Subaru instead of aluminium? Would be cool to still see inside. Much 💙 from New Zealand 🇳🇿
cover the rear wheels and create a diffuser that comes up to meet the rear roof line, like a koenigsegg speedtail. you could make the wheel covers removable obviously. love the project. keep it up.
Lightweight wheels ONLY if forged and fully inspected with xray, etc and track only. The car is still heavy with that battery. No idea what corner weighting a chopped Tesla has. It is still more than 4000lbs with cage and Kyle.
@@pgmurray76 More falsehood, nonsense, lack the preop basics, principles, knowledge. If You have seen the Wind tunnel testing, results Your nonsense is verified invalid. Good luck
Sup Kyle out here in Milliken love your shit broskie been here since early wago keep it up I can't help but to live vicariously through you and the homies!! Props on the boosted boiz wind tunnel edit good shit!! But watching you try to drink a twisted tea while whit has a leaf blower in your face would have been awesome haha peace
I think itd both be a good idea and save you money to essentially do what the ford gt does with the huge gaps between the wheel wells amd the car. You already have the rollcage as reference and itll help with the teardrop effect as well as outside turbulence. Just a good idea fairy passing by.
You gotta patch up those holes on the sides in the front, and think about using weatherstrip or something else to create an air-tight seal between the cage and the aluminum. Something that doesn't look like it would be a big deal can kill aero. I'm only suggesting cause I want to see this thing as fast as can be!
I hope you guys had fun filming a little bit of a skit for this one it adds so much. Tom’s Refurb does little bits in his videos and it definitely makes them more fun
Aluminum panels will 100% work..... Get a roll of black dry carbon fiber wrap and wrap them, extend the wrap over the small air gaps between your panels to seal it up good and E-Roy will look and act like a stealth fighter! Love the CAD work and BB wind tunnel science.😂
Use the original panels as a plug for a mould and you could make 1 sheet of fiberglass backed with teflon, the panels would look like the original .That would be boss
Yes, tufts of yarn are still, to this day, used in flight test. For example Virgin Galactic had them all over VMS Eve for the last flight. Even with the most advanced technology some times it just takes a piece of thread and duct tape to see what's going on...
Reminds me of that seen from Ford vs Ferrari where Miles puts yarn and tape all over the car and rips the computer out of it and proves the computer was wrong that the car was catching air lol.
Awesome guys! I think the decision you’re making with E-Roy is the right one. I dropped a comment on the last drag strip video suggesting some aero testing (I thought you could use the air boat fan) so it’s good to see you have the same idea. No point dropping the cash on anything more permanent until you have an idea that it will work. I’m excited to see what happens. Loving this “racing science” content! You guys need some lab costs and pocket protectors.. 🤓🤓 😛😁
😂😂 the ending and the song was just perfect. I pictured kyle writing and circling the word sketchy, high fiving Wyatt ,as they nod in agreement,for the ending. 😂
I tried warning him about mirrors in a comment when he first took everything off and kept saying the jeep thing 😂 keep up the awesome content, this thing is too nasty
At least it wasn’t for a loud exhaust this time
cool cops are the best
At the end I thought you were going to get the air boat lol
I think you can get away with a lot more on the Tesla lol
Sucksess!
I’ve always thought you were the biggest copycat on TH-cam. Now there is proof.
Cop seemed pretty cool! “What’s this thing running” oh my lawd!! Lol
You have to bring such a thing to German Roads. 😅 they will looking at you Like: well, but no. 🤣
W cop
@@9Loki11 And you get some little Problems after that pull over. Grüße aus Deutschland. ✌😁
@@ja10ni STILLGELEGT!!
@@9Loki11 Thought exactly the same, hehe, now way this would fly over here... Greetings from Berlin! ;)
Props to your local PD, that officer was rather chill 👏🏻❤
If this was LA someone would have been shot
@@_BangDroid_ If it were LA his Tesla would be stolen already tbh lolol.
You're so right!
That piece of shit was super chill as he violated Constitutional rights.
I'm betting he has pulled Garrett over a few times 😂😂
Kinda looks like Christopher McDonald
The last two skits with the cardboard and wind tunnel are epic dudes. BB needs more shenanigans like that. Great content keep it rolling.
Missed opportunity on those skits though... I was waiting on the K-Swappped airboat as the wind source... 😆 🤣 😂
It was fantastic and so unexpected 😂 love the music too
Absolutely 😂😂
I'm fucking geeking too haha
The ending of this is the greatest piece of art made during this decade.
I just came here to make my own statement about the outro, that was freaking great
Lol it reminds me of the old construction movies in the late 90’s. Nostalgic
That 80s montages at the end was awesome!!
I agree, the tesla is looking beautiful
Probably wise to lean the C.A.D. out at the back to cover the rear wheels to aid airflow
That's the best when Kyle and Wyatt do little hilarious skits. Keep it up.
been loving them! they're little gems in the otherwise awesome content!
The wind tunnnel with rocky music was hilarious
Loved the tacky '80s teen movie music for the wind tunnel montage. So many fully developed bits to further the "realism" of this segment. Plus the instant bodywork installation first. Well Done Bois!
Sucksess 😂😂
😂
MORE 80s MONTAGES PLEASE!
TAKE IT TO THE LIMIT! 🎵
If you guys haven't already started this, another option instead of aluminum sheet is Alumalite, or something similar. It's basically the aluminum version of cardboard, with a corrugated layer between thin aluminum sheets. It will be much more rigid and probably lighter (depending on thickness) than the solid sheet you'd end up using. I've always heard you can usually get it fairly easily locally by talking to sign shops. A lot of people use it for splitters and flat bottoms, so if you're keeping the panels flat ish, it'll probably be a great material for that. Just a thought.
Isn't alumilite those aluminum soldering rods they used to sell on late night infomercials in the 90s?
@@rallywagon261 Oh my bad, typo. It's spelled Alumalite. Thanks, fixed. If you search for "alumalite sheet" you'll see what I mean. But yeah probably
Signs. The use those exact materials in signs. Commercial, parking lots, stuff like that.
Finally, the production quality we deserve. More 80’s montages edits please
i loved it too
What a great Cop! He made sure it was your car and then sent you on your way.
It? Why are u objectifying that poor cop
@@rbnkrlssn stupid spellcheck.
bros dickriding a cop
curious if one of his first thoughts was "are they parting out this stolen vehicle?" i know theft and parting out is pretty active these days.
@@MrPuddinJonesmost definitely, any time a cop sees a junker car or something missing panels it’s a red flag, kinda judging in a way but sometimes it really isn’t the person drivings car.
that rear wheel surely sticks out quite a lot and since it's spinning it'll create quite the drag, might wanna have a little extension to the side to lead more air around that tire
Yea man thats what I was thinkin
Good catch I really hope Kyle sees this comment
Cheap fender flares will fix that...
They should go for a straight up funnycar body with rear wheels covered that would improve it a ton
The science going into the body design is mind blowing! Love seeing all that technical work with the wind tunnel
1mm aluminum is thicker than you need. 26-28 Guage would probably be fine, especially if you add some bead-rolls for extra rigidity. Also the rear end should be pointy or teardrop shaped. When the back is truncated or flat, it creates a low pressure pocket that sucks the car rearward. Most people don't think about the back of the car when they think about aerodynamics, but how the air separates or comes off of the car is just as important as where it first meets the front of the car.
Agreed. They should be looking at hypermile cars, solar powered cars, etc. They value aerodynamics like nothing else.
Would golfball-type dimples help in this case?
@@josephquinto5812 Black Dry carbon fiber wrap has surface texture and would look cool!
@@josephquinto5812 yes it would, but the effect is very minimal on the scale of a car. I believe mithbusters did an episode on it; the difference was negligible.
how about carbon fiber? Get some foam, shave it to shape for the sides and top, lay down sheets of carbon fiber and epoxy. Wait for cure, trim to shape. Should be lighter, quieter, and less flexy than aluminum.
The wind tunnel part had me rolling 😂
The 80s montage was definitely a huge "sucksess"! Lol. You guys need to do more of that!
The wind testing results are quite impressive. WOW! Such speed!
The cardboard cuts got me dead 💀
The ending was so hilarious, great editing, and just a fantastic outlook.
even f1 redbull racing team should be jelly about your wind tunnel skills , good job. 👏🏻
Ever since Adrian Newey saw this video, he has been concerned about his job
The entire video had me cracking up I loved the theatrics involved and the music at the end you guys keep stepping it up love what y’all are doing with the channel
Cop say you guys have fun!! We don’t hear that enough, keep up the good work officer!!
I love the R&D skit 😂
Love that y'all are genuinely having fun til this day!😂
Love E-ROY. Just started watching your channel at the start of this build
So really cool to see the next step in the sport and see young entrepreneurs testing ideas. You guys rock
Officer was a nice dude!
Appreciate the cop being cool and understanding. Definitely good to be safe and make it a priority.
That wind tunnel montage was the funniest thing ive seen from you bois and also the funniest thing ive seen this year love ya work keep it up
So cool to see all of the different projects you are working on. I subscribed because I saw the E-Roy content but I still enjoy your other content too. Keep up the great work.
Sorry officer let me just roll down my imaginary window
Huge thumbs up for the epic 80's music montage at the end. So Funny. Love the sense of humor. The 80's were pretty great though. Kids today will never be as free as we were back then. Go out after breakfast on our bikes or skateboards and come home when it gets dark. No phones to call us, no parents thinking we were kidnapped, just me and my bro's having fun all day. That was true freedom.
Love the vids one of my favorite channels 🙏🏽
Never stop being boostedboiz, your videos Always Bring me Up ☺️
The boosted-boiz wind-tunnel looks legit 🤣
The EDITING, was top tier, my hats off to ya!
Those last two skits just cracked me up, keep the awesome content
80's montage = best montage
That wind tunnel 80s montage was awesome!!
The 80’s movie action montage is the best thing I’ve seen on TH-cam in a long time.
The BB Aeromatics Team knows there stuff!!! So 80's professional, loved it .That cop was so cool.
That 80's style music got me 😂 . Keep killing the Game Boyz 💯✌️
Kyle i have to congratulate you. As an EV hater i never ever watch anything to do with EV`S of any description. However, ive watched every video of yours on this EV & enjoyed each & every one.
Why do you hate EVs?
@@MODElAIRPLANE100I get what he’s saying. Hate is a strong word I think. But I dislike EV’s for the purpose of there’s no soul. It’s not “living and breathing” if you know what I mean. Charge up, hit throttle, chirp of the tyres sound of air moving…… The process of what Kyle has done or is doing to this thing is more interesting than just an EV car that goes fast.
The wind tunnel testing 😂 keep up the great work you guys!
That ending just made my day 100% better, thank you guys😂😂
You should try to build a speedtail for E-Roy.
Omg like the McLaren? That’d be amazing
@@nicholasn.2883yeah, it should help a lot with straight-line speed
I love your dedication to making the Plaid faster. Rear lower control arms that adjust to have the tire sit flat to the ground near full suspension compression helped my Plaids launch. The Plaid motor has so much more HP potential, but it's limited by the cells voltage sag. I'm adding a high-C rate pack to mine in parallel with the OEM pack to beat your Plaids time with OEM interior. 😊
How many kWh does a single run pull? There could be a huge weight saving and power boosting for E-Roy if they made a custom batterypack from LiFePO4 cells or something like that and ditch the oem battery. If they sell the battery they could easily build a new one for that price. Need to have a brainiac to sort out all the safety systems that are included in the oem battery though.
This is what I want to see! 👏 actually modding electric vehicles power trains
@@PPekka I think LTO cells are more suited for loads like this. But ditching OEM battery will make this project an order of magnitude harder. You would need to change/reprogram/jailbreak motor controllers as they will not cooperate on custom battery without changes.
A single run should not consume more than 1000KW * 10 seconds (1/360th of hour) = 2,77(7) KWH
@@darekmistrz4364 just need to add the LTO cells on top of the OEM pack as the LTO cells don't even need a BMS and will dump loads of power when needed and the oem pack will also keep the LTO's charged as they don't have much run time on them
@@PPekka It's just a couple kWh per run. The booster battery pack doesn't need to be large or heavy. 150C-rate cells exist for drone racing that enable the whole booster pack to be under 100lbs.
Cool cop! I thought you were pretty cold with him yet he was totally chill.
Given all the power abusing videos of US cops I'd be too..
@@Ltbookum because you don't see the zillions of good interactions. Can't paint them all with the same brush or you're part of the problem.
Top notch editing. I've never seen such extensive testing
Nice work boiz 👌 love all your content, turns a boring day at work to a great day when I watch your vids.
Can’t wait for the 4x4 pulls from the Subaru. Just with the Tesla, did you think about that thin perspec material like the windows on the Subaru instead of aluminium? Would be cool to still see inside. Much 💙 from New Zealand 🇳🇿
Haven’t been this early in a minute. Keep killing it boys. Always a pleasure getting to watch you guys live out y’all’s dream. 🤘🏼
BoostedBoiz so crazy man so chill iight iight I'm tired, that cop was so chill 🤙
You guys reached a new level with this skit
cover the rear wheels and create a diffuser that comes up to meet the rear roof line, like a koenigsegg speedtail. you could make the wheel covers removable obviously. love the project. keep it up.
Good to see you guys having fun making videos. Keep it up😅
Man this channel has really come a long way....boys got themselves an official wind tunnel now! 🤣🤣
What a chilled cop, a credit to law enforcement
Awesome stuff! Light weight wheels and sticky tires will be one of the best upgrades
More comments from the Ignorant, Nonsensical "Peanut Gallery". Good Luck
Lightweight wheels ONLY if forged and fully inspected with xray, etc and track only. The car is still heavy with that battery. No idea what corner weighting a chopped Tesla has. It is still more than 4000lbs with cage and Kyle.
@@pgmurray76 More falsehood, nonsense, lack the preop basics, principles, knowledge. If You have seen the Wind tunnel testing, results Your nonsense is verified invalid. Good luck
Sup Kyle out here in Milliken love your shit broskie been here since early wago keep it up I can't help but to live vicariously through you and the homies!! Props on the boosted boiz wind tunnel edit good shit!! But watching you try to drink a twisted tea while whit has a leaf blower in your face would have been awesome haha peace
You had me cracking up with the 80's music/homemade wind tunnel segment 😂😂
Ok ok ok gotta say definitely loved the ending.. air testing yall did awesome on that... can't wait to see what yall do with this damn thang
I think itd both be a good idea and save you money to essentially do what the ford gt does with the huge gaps between the wheel wells amd the car. You already have the rollcage as reference and itll help with the teardrop effect as well as outside turbulence. Just a good idea fairy passing by.
Love the old skool music and montage at the end. Gives me that warm fuzzy nostalgic feeling 😂
You seem to young to be nostalgic and clearly lack proepr view with 'Old School' along with grammar school.
@@newtonfirefly3584🤡
Almost ended up as a cardboard cybertruck now.
Btw. maybe you should have some arches on rear wheels, the poke I guess creates turbulence?
Congratulations on getting that Thumbnail and Title MONEY MAKER!!! 😂 Love to see it!!!
Loved that 80s montage/product placement!
That intro was genius! loved it!
That ending 😂. Love it
The wind tunnel bit is an instant classic
Sheesh it feels like a young cleeter all over again love the content keep it going.
15:14 and on is actual solid goal. 80's bangers, maths, sketch pads and nodding heads. Only greatness can come from this.
The wind tunnel skit had me rolling hahaha but the "Sucks Less" had me dead hahahaha
The ending was GREAT..loved the 90s montage
Great to see you two having fun at the end.
loved the montage at the end, this build is alot of fun to watch, and probably to work on too since its different from tuning an ICE vehicle.
You gotta patch up those holes on the sides in the front, and think about using weatherstrip or something else to create an air-tight seal between the cage and the aluminum. Something that doesn't look like it would be a big deal can kill aero. I'm only suggesting cause I want to see this thing as fast as can be!
it needs to look dumb like a honda insight with rear wheels half covered
I hope you guys had fun filming a little bit of a skit for this one it adds so much. Tom’s Refurb does little bits in his videos and it definitely makes them more fun
The montage at the end was funny as.... and the perfecr music😂😂😂 I was expecting the use of the jet boat fan though!!!
👍🏼😀Love that Wind Tunnel LMAO You Guys Definitely Rock
Aluminum panels will 100% work..... Get a roll of black dry carbon fiber wrap and wrap them, extend the wrap over the small air gaps between your panels to seal it up good and E-Roy will look and act like a stealth fighter! Love the CAD work and BB wind tunnel science.😂
Use the original panels as a plug for a mould and you could make 1 sheet of fiberglass backed with teflon, the panels would look like the original .That would be boss
The technology skit was great. love the silliness. Keep it up boiz!
That ending was the best one yet. Had me on the floor.
Yes, tufts of yarn are still, to this day, used in flight test. For example Virgin Galactic had them all over VMS Eve for the last flight. Even with the most advanced technology some times it just takes a piece of thread and duct tape to see what's going on...
Reminds me of that seen from Ford vs Ferrari where Miles puts yarn and tape all over the car and rips the computer out of it and proves the computer was wrong that the car was catching air lol.
80s cut of the testing phase was hilarious lmao
Awesome guys! I think the decision you’re making with E-Roy is the right one. I dropped a comment on the last drag strip video suggesting some aero testing (I thought you could use the air boat fan) so it’s good to see you have the same idea. No point dropping the cash on anything more permanent until you have an idea that it will work. I’m excited to see what happens. Loving this “racing science” content! You guys need some lab costs and pocket protectors.. 🤓🤓 😛😁
Florida has some of the coolest LEO's...he knew enough to know how fast an 8.8sec pass is, and was impressed! LOL! I love it!
thats some real CAD work (cardboard assisted design)
"If his fuel pump is louder than your exhaust, you're fixin' to get gapped!"
Gosh that ending had me crackin up! Good job boys 😂
Ending killed me😂 keep it up guys!
Wonder if this could convince Cleetus to finally do some sort of clear plexi panels on leroy
Random thought. What about taller tires? That would give your some more top end and maybe tame the wheel spin at the launch
There is almost zero room on the front suspension componets.
Worse rolling resistance, would affect launch times
Ignorance, Nonsense from the "Peanut Gallery" ??!!
😂😂 the ending and the song was just perfect. I pictured kyle writing and circling the word sketchy, high fiving Wyatt ,as they nod in agreement,for the ending. 😂
That ending was pure gold! 🤣
👍to Wyatt for sporting the Garage Idiots shirt. Preston deserves the recognition.
Great channel
The skit at the end was the best piece of content you’ve made in a while. It was a total “sucksess”.
Officer was super chill!
Wind tunnel segment was frickin gold
I tried warning him about mirrors in a comment when he first took everything off and kept saying the jeep thing 😂 keep up the awesome content, this thing is too nasty
Best BB video so far!!! And I’ve been down since the early D town days😜 Great job Kyle!