I replaced my CMC watching your video. But my clutch still goes to the floor, no pressure is built up. I tried pressure building using the Sealey VS820, clear fluid came out and some air bubbles, but the pedal still goes to the floor. I thought that should be enough after pressure bleed at 15-20 psi. I don't see any oil drip on the floor, so that makes me think, it's not the slave cylinder, otherwise there would be oil dripping from the bell housing. Don't know what am I doing wrong, it should have worked. Anyone has any idea?
Great video, how do you separate the pipes/ hoses from the clutch master cylinder?
Hi. From reservoir it is quick disconnect and from line from clutch has metal clip.
I have an astra j same year, some times getting bad juddering when pulling off in first . Any ideas what the problem could be ?
Заменить комплект сцепления
I replaced my CMC watching your video.
But my clutch still goes to the floor, no pressure is built up.
I tried pressure building using the Sealey VS820, clear fluid came out and some air bubbles, but the pedal still goes to the floor. I thought that should be enough after pressure bleed at 15-20 psi.
I don't see any oil drip on the floor, so that makes me think, it's not the slave cylinder, otherwise there would be oil dripping from the bell housing.
Don't know what am I doing wrong, it should have worked.
Anyone has any idea?
Sounds like realese bearing on clutch popped
Thanks mate great video, the garage in my town fucked 4 of those master cylinders by yanking it in the clutch padel, what an amateurs😂
Thanks! Sometimes mistakes are the way to learn ;))
🫡