It has been pointed out that at the 18:13 mark I explained the sealing at the top of the window completely opposite of what it should be. The house wrap along the top should be the layer you see when done. Seal it to the membrane. Watch this video fro a better example. th-cam.com/video/dC3_0srY0Rs/w-d-xo.html
I just bought a house last year, I've always been fairly handy with electronics and cars, but little with home improvements. Your videos are great and a big help to people who want to see someone doing something right, and explaining it well as they go. Thanks again, you've been a huge help
Thanks Shannon! Between this and your "how to frame in a window" video, you've shown me all I need to be successful in adding a window to the attic in my 80 year old farm house.
Great information and demonstration. Slightly slanting the bottom board of your rough opening by 1/8 of an inch was a great idea. Water follows the path of least resistance so it's running off and down the siding rather then seeping and soaking in the wood. The membrane is an added protection to the wood. Not completely sealing the bottom part of the window with silicone bead is added protection just in case water should find a way behind the window it can still run back out. Very good video well explained.
Excellent. I just did the first three windows in my new construction, almost exactly as you did. The top is the only difference, though minor. You mentioned the house wrap laid down first, then the membrane applied. I layed the membrane first, overlapped with the housewrap. Then using tape, seal the wrap down. Just another flap of protection.
FANTASTIC!! Thanks for the great instructional video!! I cut a hole in the house & installed my first window following your instructions. So easy & simple when doing it right.
This is THEE BEST video presentation I have ever watched. Nice lighting, can see wherever you point or are talking about, not dead time or windblowing on microphone. REALLY appreciated your presentation, process, products and concept. Gave me the courage to attempt 1 or 2 for my beginning experience. Trying to find how/where to buy less than 100 RedZone corner guards. I want to use THEM as you directed because you can cut them to size. Considered Lightening Flash corners, but trying to pursue Resisto RedZone corner guards. THanks for such a fine presentation. We novices can really learn and emmulate your "simple" process so clearly demonstrated.
+Dean Nezerka I have seen techniques where instead of the corner guards, you just use the same peel and stick membrane- trim an 8 inch piece, and stick it at the bottom corners, folding half its width onto the sill, and the other half it's width onto the edge. You also have to overlap it 4 inches from the sill so that the other 4 inches stick out off of the exterior wall face. THEN you trim the membrane overlapping the wall face at a diagonal so that you can tightly fold it ONTO the wall face.
good job - i've been a contractor for 18 years and just installed 2 windows after not having done it for ten years. Your method is the same as mine although I used no silicone on the bottom flange. Great vid to reinforce I still remember things!
Thanks Shannon. Great advice and very helpful for a beginner like me. I used your method on 3 windows I installed into a block wall shed after framing the openings. On the last 2 I added a metal drip flange above the window and covered the vertical part with another layer of sealing tape. Thanks again.
You make everything so easy to follow, I am building a small 16'x20' cabin up north and before I do stuff, install doors windows, insulation house wrap I first check your videos to help me do what I have to do. Keep up the great work !
I have just taken the time to watch a few of these and this gentleman is one of the best teachers and the best quality videos for DIY that I've come across. It helps cities Canadian because he's speaking my language ;-). Thank you thank you thank you for taking the time to put these together. I have more confidence now in doing a project myself.
The corner protectors would seal better if you install them after the flashing, and on your bottom flashing, if you don’t have house wrap yet if you don’t peel off the paper and just throw a couple staples and when you do install house wrap you are able to lift the flashing and tape it over the house wrap, thanks for the videos!
Sure appreciate your time showing us the proper way to install a window. I watched this because I had windows installed and wanted to make sure it was done properly. Sure helped a lot having the knowledge. Thank you 😊
As always I find your videos very helpful. You’re great at explaining concepts and are extremely quality oriented. Thanks for taking the time to put together these great instructional videos.
This is exactly what I wanted to see. Great video, very detailed, clear, price and nice pace to it. Appreciate it for documenting and sharing!!!. You earned a subscriber!!!
I enjoy watching someone doing it right! Why didn't you use truss head screws, as you did in other videos? Do you have a preference? Why? Thank you for your time and consideration for others!
Here's a tip for anyone reading comments, don't use a level. Let me now clarify. In the case of this window installation, where it appears to be approx. 6 inches from the soffit, a level window may not actually follow the long horizontal line of the soffit. This can make the window appear to be tilted when viewed from outside of the home. I use to install siding and ran into this issue many times. Aesthetically, you want to the window to "appear" level, not necessarily be level. Being that the long line of the soffit is very close to the window, I would use it as the reference to measure from, making each side of the window the exact distance down from the soffit. Inside the home you needn't worry so much about it as distances from the ceiling can be "corrected" visually with the trim that is installed around the window, giving the appearance of a level window. A window with no close horizontal references (in the middle a large wall with a gabled roof for example) I would certainly use a level. Obviously, discretion must be left to the installer. This is just my experience. As a note, if both sides of the window are the same distance from the soffit, it makes the siding piece that goes over the window easier to rip for installation as well. One more thing, I was always told to use 16 brights for installation (nails) for their grip strength on door and window installations. You don't want your nails backing out. I'm not sure if that's code, or just my inspectors preference, but tiny roofing nails would be frowned upon in my neck of the woods. Nicely done otherwise, and I appreciate the effort made for a quality video!
If you don't level your window it can be inoperable. When the sill is out of level that bad you should adjust with shims (if space allows) or call a pro to do some minimally invasive framing work.
I agree with everything you said except for the roofing nails. I've pulled out plenty of windows that were a giant pain in the ass to pull out that used 1½" roofing nails. Also, if the depth/ throat of the window is not as thick as the wall it's better to make sure your reveal on the inside is even rather than making sure it's level
My company installed for three Lowes stores for 27 years. It sucks when something like a soffit made a level window look crooked. We always choose to level and plumb our installs, usually with a laser on tripod. Seems like overkill but if there was ever an issue the manufacturer reps would throw us under the bus if it was a fraction out of level. Most of our installs were impact single hung that didn’t allow any grace to work correctly. Choose your battles.
this guy aint fukin around! quality work is not expensive, its priceless. thanks for these great videos. im ready to hit a home run now with my repairs.
I am planning to replace single glazed windows in my house. How do I measure the olde windows they are in the brick wall outside side. Can you please post some guidance on that part. I do watch the program you post time permitted. I will appreciate it Thank you 🙏🏻
Do you need to use the window insulation foam that goes into the side of the window and expands? I saw a bottle of that home depot and wasn't sure if I should use that
18:13 I'm confused. You say, if you had house wrap, you would bring the flap down (and staple it), then apply the membrane over it. But on your other window install video (Sep. 04/12) at 20:00 - where you actually do have house wrap, you apply the membrane first, then the house wrap flap over it (then tape it). Which is what I thought it should be. Which is it?
Isn't it possible for water running down the stud to get behind the corner guard? Would you recommend possibly throwing a small bead of caulk at the top of the guard?
Love your videos Shannon! I'm on your forum as well and find it very helpful. Can't believe you have to time to answer all the questions you get on the forums a busy as you are. Old adage.."if you want it done right.. ask a busy man to do it" ;)
Hello, thanks for the video, I'm wondering though, once the smaller window is in, how do I match the exterior vinyl covering so it is seemless with the rest of the house? Do you have a video about that? Thanks in advance
I replacing a window currently with nailing fin and confused. What window dimensions will I buy to fit my opening properly with the flange? My opening is 36x54
@@HouseImprovements I've watched you for years and you've helped me on countless DIY projects. Whether it was working on a heater system, soldering, and now door installation you've got the touch, man! Thank you very much!
I have 2 widnows nailed in behnd stucco. I am going to attempt th easiest one first. When attempting to get a couple estimates on 2 windows I need right now. Both as naied behind stucco, so I guess I am confused on how to measure it. Thank you for any help..... Im using your exterior garage door video also. you rock and are ery helpful.
Hello Shannon, Always I really do very much spiritually appreciated your tutorial DIY projects. I couldn't find someone to installed 5 windows downstairs without trying to rob me without a pistol. So DIY came into play. Your windows are the same that I purchased from a window wholesaler that saved me quite a bit of money. Champion was attempting to charge me over 5 grand for these windows. Instead of using nails I decided to utilize construction screws which in my opinion has better holding power. I don't have any membrane material or the corner plastic I saw in your video. I am going to home depot to purchase them. The replacement windows are double-paned and let down on the inside. I love them. The old windows are one pane and not energy appropriated. Once again Shannon keep up good work and I will continue to watch your tutorial videos. Hey, do you have a video on removal and installation of a fireplace? Take care of yourself and family. Be safe and practice social distance. Peace and Love In Yahshua Messiah, RE Morgan
Hey Shannon! Appreciate the videos very much. At the 18:20 mark you mentioned having the house wrap down then the adhesive paper over the top of that. Not sure if i am understanding that part correctly. Thank you so much for the help with your great videos!!
Just bought some of the Resisto membrane the other day for some windows I was installing, noticed it now has a plastic backing instead of the brown paper which is nice because it comes off clean without ripping.
Dupont makes a peel and stick tape that uses butyl instead of asphalt based adhesive. Always check for comparability. One complaint above was silicone cracking. With asphalt based peel and stick the silicone never sets up correctly. It's on the label. Also eliminates need for primer.
Great video. Thx for pointing out that some windows have a built in J channel. I didnt know that. Im going to be installing a similar window and siding n my shed so the timing of your video was perfect.
Seems that my shed window will take longer than normal to be delivered due to Covid. I wonder if its ok to install my soffits and fascia before installing the siding. Then I would butt the siding up to the fascia using a finish trim. This will allow me to get some work done while waiting for my window. My original plan was to install the siding first then install the fascia J trim over top. Any suggestions or recommendations.
For anyone who has experience with window install/ building; are the new construction windows with the nailing fin considered superior to reno windows? I am going to install new siding at the same time so the new construction will be an option.
I dont like the nail fin style. If you ever have to change the window you need to pull siding also. I also think the wider profile around them looks better
Your the man I always love your videos I'm looking to have to resheet outside of a enclosed porch with new windows drywall an wireing an this is super helpful I love your work guy an videos
I didnt realise I needed a membrane over the mailing flange. I just ran a generous bead of silicone over the flange seam and also caulked the edges of the 1x4 wood window mouldings. Is that enough?
Great instruction, love that you are so conscientious about keeping water OUT! I'm trying to install my first window so this information is very helpful. I do get frustrated when trying to buy supplies and materials. I searched Lowes for "corner protectors" and "resist" and "membrane" - a few things come up but nothing looks like your protectors or membrane. So although I know have the knowledge- I don't know where to get the materials! I do see a 4in membrane on Amazon for (Blueskin brand) or $60 (Henkel). But I still don't see "corner protectors" that look like those. Are they perhaps called something else? Do you know who makes those?
So a question, I don't understand the shims. Why do I need to leave room for insulation? I can't just set it down on the frame? Just curious what a difference it makes. Thanks for a great video.
Cause if you set it right down you still have a small seam that will leak cold air and is hard to insulate. leaving a space allows for adjustments as well when installing.
Gheeze looks easy from the outside. Unfortunately I have a wall that I cannot access from the outside. How can I install this type of window from the inside????
What length of shingle nails did you use for this install. I have a utility window that I am going to install in a shed building that I built last year. The window is a basic 24" x 24" slider, perfect for my shed. The window manufacturer says use #8 x 2" screws or nails. I have 5/8" OSB sheathing. A 2" nail would penetrate ~1 3/8" into my 2 x 4 frame. A 2 ½" would ~½ way into the 2 x 4 frame. Seems stronger.
Does a flanged window like this with the built in J channel all around for vinyl siding require an additional drip cap across the top or can you just lay the siding in the top channel? Thanks for your videos, you help us folks who can do the work, do it right!
Hi Shannon. Good Video. I'm in BC and had a question about drip caps or rigid head flashing. Should they be applied above the window but below the trim? or above the trim? or both? and should the ends of the dripcaps be bent up to create end dams or bent down over the edge of the trim or window?
Ideally they should be above the window and if using a trim around the window they should be above that also. In that case the one between the window and trim would be cut to the window width and the upper one can have dams if your siding is something other than vinyl siding or stucco.
If using spray foam inside to air seal, do you do the bottom of the window at the sill? If so, would that inhibit the condensation being able to drip out?
I have watched about seven of these installation videos on TH-cam now and this is the first video I've seen that no tape was put down both sides of the window before the window was installed on the rough opening
With the rigid siding you can caulk all around the window . With flimsy vinyl siding you can't because it moves. Water in a "J" channel should run down to the bottom and over some kind of sill and over siding below the window.
Shannon you are the best!!! Thanks so much for taking your time and explaining so well. Its thanks to you that i have installed 5 new windows in my house both flange and brick molding. I would have only one question. Please help me with a response. Do you think you need a drip cap on top of the windows when installed this way??? if so where would the drip cap go? On top of membrane or on top of the sheathing then membrane then house wrap. I have installed only one drip cap so far in one of the windows on top of the membrane and wondering if i should do the same for the rest. Thanks again Shannon GOD bless you
Shannon, what is the siding on this house? I am residing my house that has masonite on it. I am adding vinyl. Would you fir out that house you are working on to reside it? What would you use to fir it?
if i were to replace and old aluminum window on a mobile home with a new construction w/flange just like this one, what should i use to seal the vinyl to the aluminum house on the outside?? I live in western new york and winters can be grueling so i want to make sure they dont leak
The company I work for we always cut off the construction flange instead of nailing it in and just use tap cons in the frame. I suppose the flange is for new construction only? mostly only do remodels, just curious about your thoughts on that
Then you must cover those holes with a plug? I use windows with a renovation brick mould. Here is a video showing me using that type of window. th-cam.com/video/QSHo-_Ja34U/w-d-xo.html If you have more questions please use my forum. www.house-improvements.com/forums/
Question - how do you attach the corner guards to the sill? I bought a few but since they are very thin plastic, they don't lie very flat. I don't think nailing it will be adequate. Did you use some kind of glue?
How do you handle this type of installation on a house with house wrap pre-installed? Specifically the sides. I've seen your other videos where you trim the wrap back an inch from the opening. Do you follow a similar method for these windows with a nailing flange? Thanks for the great videos.
Yes , just like that , the only difference when installing a window with a flange is that the window goes in before the sides and top are flashed with the membrane.
Not sure what country your from but this is not code anymore in Canada. You can use the nailing fin to install the window however the window has to be secured with either screws through the frame or installation clips. Failure to secure the window through the frame will most likely void warrantee.
![How To Replace A Door Weatherstrip Seal [Easy DIY]](http://i.ytimg.com/vi/JUx0cjbzbhs/mqdefault.jpg)
![How To Replace A Door Weatherstrip Seal [Easy DIY]](/img/tr.png)
It has been pointed out that at the 18:13 mark I explained the sealing at the top of the window completely opposite of what it should be. The house wrap along the top should be the layer you see when done. Seal it to the membrane. Watch this video fro a better example. th-cam.com/video/dC3_0srY0Rs/w-d-xo.html
Your videos are the only ones that are calm, actually step by step and helpful, no ads, no ego. Thank you.
This is exactly what I needed to see. Thank you. Cheers.
Thank you very much for the donation!
I just bought a house last year, I've always been fairly handy with electronics and cars, but little with home improvements. Your videos are great and a big help to people who want to see someone doing something right, and explaining it well as they go. Thanks again, you've been a huge help
Who would have thought you would have been handy with electronics and cars?
Why didn't I find this guy earlier!! Would have saved me a TON of time. Well done, sir.
Shannon you are the best. i have used your videos for years for several projects. thanks for making things easy to understand. you're the bomb!!!
Probably one of the very best "How To" videos I've ever seen.... Every detail with an explanation for each one. Thank you
Thanks Shannon! Between this and your "how to frame in a window" video, you've shown me all I need to be successful in adding a window to the attic in my 80 year old farm house.
+Rob Weaver Good luck
Great information and demonstration. Slightly slanting the bottom board of your rough opening by 1/8 of an inch was a great idea. Water follows the path of least resistance so it's running off and down the siding rather then seeping and soaking in the wood. The membrane is an added protection to the wood. Not completely sealing the bottom part of the window with silicone bead is added protection just in case water should find a way behind the window it can still run back out. Very good video well explained.
I'm glad you picked up on that! It's important to consider those details.
Excellent. I just did the first three windows in my new construction, almost exactly as you did. The top is the only difference, though minor. You mentioned the house wrap laid down first, then the membrane applied. I layed the membrane first, overlapped with the housewrap. Then using tape, seal the wrap down. Just another flap of protection.
FANTASTIC!! Thanks for the great instructional video!! I cut a hole in the house & installed my first window following your instructions. So easy & simple when doing it right.
Appreciate the many helpful videos you have provided over the years. Detailed and easy to understand. Thank you!
This is THEE BEST video presentation I have ever watched. Nice lighting, can see wherever you point or are talking about, not dead time or windblowing on microphone.
REALLY appreciated your presentation, process, products and concept. Gave me the courage to attempt 1 or 2 for my beginning experience.
Trying to find how/where to buy less than 100 RedZone corner guards. I want to use THEM as you directed because you can cut them to size. Considered Lightening Flash corners, but trying to pursue Resisto RedZone corner guards.
THanks for such a fine presentation. We novices can really learn and emmulate your "simple" process so clearly demonstrated.
+Dean Nezerka I have seen techniques where instead of the corner guards, you just use the same peel and stick membrane- trim an 8 inch piece, and stick it at the bottom corners, folding half its width onto the sill, and the other half it's width onto the edge. You also have to overlap it 4 inches from the sill so that the other 4 inches stick out off of the exterior wall face. THEN you trim the membrane overlapping the wall face at a diagonal so that you can tightly fold it ONTO the wall face.
Dean Nezerka the
Dean Nezerka
Dean Nezerka ll,,LKK,l
Ll.
Dean Nezerka ججهخحححجج
good job - i've been a contractor for 18 years and just installed 2 windows after not having done it for ten years. Your method is the same as mine although I used no silicone on the bottom flange. Great vid to reinforce I still remember things!
and you do a great presentation explaining why and how to those learning.
granitestatemike i
granitestatemike. 7-"1
Thanks Shannon. Great advice and very helpful for a beginner like me. I used your method on 3 windows I installed into a block wall shed after framing the openings. On the last 2 I added a metal drip flange above the window and covered the vertical part with another layer of sealing tape. Thanks again.
Thanks for the complete concise instructions. You never disappoint!
i wached a lot videos about windows flashing, but this guy is the top one, this corners at the botton Wow is the best thing i see for this job 👍🏼👍🏼
This is one of the best home improvement channels on TH-cam!! Thanks Again!!
Wow, thanks!
You make everything so easy to follow, I am building a small 16'x20' cabin up north and before I do stuff, install doors windows, insulation house wrap I first check your videos to help me do what I have to do. Keep up the great work !
I have just taken the time to watch a few of these and this gentleman is one of the best teachers and the best quality videos for DIY that I've come across. It helps cities Canadian because he's speaking my language ;-). Thank you thank you thank you for taking the time to put these together. I have more confidence now in doing a project myself.
I'm finally replacing my windows (71 vintage) with new windows of this style. This is an excellent explanation of the process.
The corner protectors would seal better if you install them after the flashing, and on your bottom flashing, if you don’t have house wrap yet if you don’t peel off the paper and just throw a couple staples and when you do install house wrap you are able to lift the flashing and tape it over the house wrap, thanks for the videos!
My partner and I are building our own house and are fairly clueless. Your videos have been a tremendous resource. Thank you!
+Lawrence Fishburnt Thanks and good luck. if you have questions at times please use my forum.www.house-improvements.com/forums/
Sure appreciate your time showing us the proper way to install a window. I watched this because I had windows installed and wanted to make sure it was done properly. Sure helped a lot having the knowledge. Thank you 😊
As always I find your videos very helpful. You’re great at explaining concepts and are extremely quality oriented. Thanks for taking the time to put together these great instructional videos.
Very nice job and simple explanation. Doesn't seem like rocket science.
Good job! I was interested business 40 years. I can't believe how many builders get this wrong!
This is exactly what I wanted to see. Great video, very detailed, clear, price and nice pace to it. Appreciate it for documenting and sharing!!!. You earned a subscriber!!!
Lot of respect to the man in the video. He knows his job and is very good at it. God bless you and your working hands for years on.
You're the original Master Chief (117), and you've got a cross symbol?! Who are you?! A new friend?
I found your video very helpful…I’m a do it yourself woman and this was great…thanks👍
You’re great at explaining every little thing. Really appreciate your videos.
Great video. You had many more protective steps than some other videos where they didn't check levels, didn't use the butyl flashing, etc.
You just saved me over a $1000. DYi is where its at.
Yessir
Great video and straight forward. Replacing all windows in my house with these type of windows.
I enjoy watching someone doing it right! Why didn't you use truss head screws, as you did in other videos? Do you have a preference? Why? Thank you for your time and consideration for others!
I prefer shingle nails with a nailing flange because the heads to not inter fear with the siding or finish as much as a truss head does.
Here's a tip for anyone reading comments, don't use a level. Let me now clarify. In the case of this window installation, where it appears to be approx. 6 inches from the soffit, a level window may not actually follow the long horizontal line of the soffit. This can make the window appear to be tilted when viewed from outside of the home. I use to install siding and ran into this issue many times. Aesthetically, you want to the window to "appear" level, not necessarily be level. Being that the long line of the soffit is very close to the window, I would use it as the reference to measure from, making each side of the window the exact distance down from the soffit. Inside the home you needn't worry so much about it as distances from the ceiling can be "corrected" visually with the trim that is installed around the window, giving the appearance of a level window. A window with no close horizontal references (in the middle a large wall with a gabled roof for example) I would certainly use a level. Obviously, discretion must be left to the installer. This is just my experience. As a note, if both sides of the window are the same distance from the soffit, it makes the siding piece that goes over the window easier to rip for installation as well. One more thing, I was always told to use 16 brights for installation (nails) for their grip strength on door and window installations. You don't want your nails backing out. I'm not sure if that's code, or just my inspectors preference, but tiny roofing nails would be frowned upon in my neck of the woods. Nicely done otherwise, and I appreciate the effort made for a quality video!
If you don't level your window it can be inoperable. When the sill is out of level that bad you should adjust with shims (if space allows) or call a pro to do some minimally invasive framing work.
Or have level soffit...if doing it yourself.
You are correct. I did use a level and after going outside to look the window is off even though it's level.
I agree with everything you said except for the roofing nails. I've pulled out plenty of windows that were a giant pain in the ass to pull out that used 1½" roofing nails. Also, if the depth/ throat of the window is not as thick as the wall it's better to make sure your reveal on the inside is even rather than making sure it's level
My company installed for three Lowes stores for 27 years. It sucks when something like a soffit made a level window look crooked. We always choose to level and plumb our installs, usually with a laser on tripod. Seems like overkill but if there was ever an issue the manufacturer reps would throw us under the bus if it was a fraction out of level. Most of our installs were impact single hung that didn’t allow any grace to work correctly. Choose your battles.
I use a little tape to hold the bottom shim blocks. Great video.
this guy aint fukin around! quality work is not expensive, its priceless. thanks for these great videos. im ready to hit a home run now with my repairs.
I don’t understand how would anyone disliked this video !! Great help thanks.
Thanks for dedicating your time and yourself for me. I appreciated for everything you have done. God bless.
Thanks for the short and precise instructions (no blah blah blah as so many others)
I am planning to replace single glazed windows in my house.
How do I measure the olde windows they are in the brick wall outside side.
Can you please post some guidance on that part.
I do watch the program you post time permitted.
I will appreciate it
Thank you 🙏🏻
Beautiful work, I added a dozen of these vids to my favorites, making our dream house perfect. thank you Shannon!
Thanks for posting this great video, lots of people post but don't take the time to explain the way you do.
Do you need to use the window insulation foam that goes into the side of the window and expands? I saw a bottle of that home depot and wasn't sure if I should use that
Yes you want to use "low expansion" spray foam to insulate between the framing and the window jambs.
Good job I learn a lot this morning. Tomorrow I will be putting my skills to work. Thank, Thank
Nice video , but I still not clear where to stop the house wrap. Do you have video talking about that ?
In review..... membrane goes over or under the house wrap? For a renovation purpose.
This guy knows his stuff
18:13 I'm confused. You say, if you had house wrap, you would bring the flap down (and staple it), then apply the membrane over it. But on your other window install video (Sep. 04/12) at 20:00 - where you actually do have house wrap, you apply the membrane first, then the house wrap flap over it (then tape it). Which is what I thought it should be. Which is it?
Hmm you are completely correct , I said that wrong here.
@@HouseImprovements Ok, good to know I'm not losing my mind! lol
This is just what I needed! Thank you for taking the time!
Isn't it possible for water running down the stud to get behind the corner guard? Would you recommend possibly throwing a small bead of caulk at the top of the guard?
Very good presentation very well explained and very good visual camera work would recommend these to anybody
Love your videos Shannon! I'm on your forum as well and find it very helpful. Can't believe you have to time to answer all the questions you get on the forums a busy as you are. Old adage.."if you want it done right.. ask a busy man to do it" ;)
Hello, thanks for the video, I'm wondering though, once the smaller window is in, how do I match the exterior vinyl covering so it is seemless with the rest of the house? Do you have a video about that? Thanks in advance
I replacing a window currently with nailing fin and confused. What window dimensions will I buy to fit my opening properly with the flange? My opening is 36x54
I would purchase 35x 53 , but no larger than 35-1/2 x 53-1/2.
Thank you for the fine, well presented demo.
It helped me a lot. I’m doing my first window replacement.
I’m sure I’ll be back.
Rob Scott
Yeah, hands down best videos for the "real" homeowner!
Appreciate that
@@HouseImprovements I've watched you for years and you've helped me on countless DIY projects. Whether it was working on a heater system, soldering, and now door installation you've got the touch, man! Thank you very much!
The video was very great. Well explained ,very thorough and you took your time. Could understand everything you said and easy to follow. Great job.
Thanks for the great feed back
I have 2 widnows nailed in behnd stucco. I am going to attempt th easiest one first.
When attempting to get a couple estimates on 2 windows I need right now.
Both as naied behind stucco, so I guess I am confused on how to measure it.
Thank you for any help..... Im using your exterior garage door video also. you rock and are ery helpful.
Awesome video!Now to convince my husband that he can make our kitchen window smaller 😅
Hello Shannon, Always I really do very much spiritually appreciated your tutorial DIY projects. I couldn't find someone to installed 5 windows downstairs without trying to rob me without a pistol. So DIY came into play. Your windows are the same that I purchased from a window wholesaler that saved me quite a bit of money. Champion was attempting to charge me over 5 grand for these windows. Instead of using nails I decided to utilize construction screws which in my opinion has better holding power. I don't have any membrane material or the corner plastic I saw in your video. I am going to home depot to purchase them. The replacement windows are double-paned and let down on the inside. I love them. The old windows are one pane and not energy appropriated. Once again Shannon keep up good work and I will continue to watch your tutorial videos. Hey, do you have a video on removal and installation of a fireplace? Take care of yourself and family. Be safe and practice social distance.
Peace and Love In Yahshua Messiah,
RE Morgan
Thanks for your comments. I'm sorry I do not have any fireplace related videos at this time.
Hey Shannon! Appreciate the videos very much. At the 18:20 mark you mentioned having the house wrap down then the adhesive paper over the top of that. Not sure if i am understanding that part correctly.
Thank you so much for the help with your great videos!!
please come to our forum and we can help you with questionswww.house-improvements.com/forums/
@@HouseImprovements i just joined last night!
Just bought some of the Resisto membrane the other day for some windows I was installing, noticed it now has a plastic backing instead of the brown paper which is nice because it comes off clean without ripping.
Dupont makes a peel and stick tape that uses butyl instead of asphalt based adhesive. Always check for comparability. One complaint above was silicone cracking. With asphalt based peel and stick the silicone never sets up correctly. It's on the label. Also eliminates need for primer.
Great video. Thx for pointing out that some windows have a built in J channel. I didnt know that. Im going to be installing a similar window and siding n my shed so the timing of your video was perfect.
Seems that my shed window will take longer than normal to be delivered due to Covid. I wonder if its ok to install my soffits and fascia before installing the siding. Then I would butt the siding up to the fascia using a finish trim. This will allow me to get some work done while waiting for my window. My original plan was to install the siding first then install the fascia J trim over top.
Any suggestions or recommendations.
For anyone who has experience with window install/ building; are the new construction windows with the nailing fin considered superior to reno windows? I am going to install new siding at the same time so the new construction will be an option.
I dont like the nail fin style. If you ever have to change the window you need to pull siding also. I also think the wider profile around them looks better
This is THEE BEST video presentation I have ever watched
The spray u used also work in metal? Like mobile home?? What kind was it?
I think it would work on metal. It is a primer made for these membranes. I believe that one was made by "Henry Blue Skin"
@@HouseImprovements thank you
Great job! Thank you so being so thorough and keeping the pace reasonable for compression. Subscribing 🙂
Thanks for the sub!
Do you only have to flash the sides after i saw another video were the put the side flashing on before the window was in
Your the man I always love your videos I'm looking to have to resheet outside of a enclosed porch with new windows drywall an wireing an this is super helpful I love your work guy an videos
Go for it!
Awesome thank you sir
I didnt realise I needed a membrane over the mailing flange. I just ran a generous bead of silicone over the flange seam and also caulked the edges of the 1x4 wood window mouldings. Is that enough?
Great instruction, love that you are so conscientious about keeping water OUT! I'm trying to install my first window so this information is very helpful. I do get frustrated when trying to buy supplies and materials. I searched Lowes for "corner protectors" and "resist" and "membrane" - a few things come up but nothing looks like your protectors or membrane. So although I know have the knowledge- I don't know where to get the materials!
I do see a 4in membrane on Amazon for (Blueskin brand) or $60 (Henkel). But I still don't see "corner protectors" that look like those. Are they perhaps called something else? Do you know who makes those?
It's a RESISTO REDZONE CORNER GUARD
So a question, I don't understand the shims. Why do I need to leave room for insulation? I can't just set it down on the frame? Just curious what a difference it makes. Thanks for a great video.
Cause if you set it right down you still have a small seam that will leak cold air and is hard to insulate. leaving a space allows for adjustments as well when installing.
Thanks! This has been real helpful as about to go install a window right now. House wrap is on so appreciate you mentioning those extra tips!
Gheeze looks easy from the outside. Unfortunately I have a wall that I cannot access from the outside. How can I install this type of window from the inside????
Not easily. We can help you in the forum if you want to come there. www.house-improvements.com/forums/
What length of shingle nails did you use for this install. I have a utility window that I am going to install in a shed building that I built last year. The window is a basic 24" x 24" slider, perfect for my shed. The window manufacturer says use #8 x 2" screws or nails. I have 5/8" OSB sheathing. A 2" nail would penetrate ~1 3/8" into my 2 x 4 frame. A 2 ½" would ~½ way into the 2 x 4 frame. Seems stronger.
Thank you so much for sharing your knowledge with us. The video was very helpful, full of information and very step by step detailed.
Does a flanged window like this with the built in J channel all around for vinyl siding require an additional drip cap across the top or can you just lay the siding in the top channel? Thanks for your videos, you help us folks who can do the work, do it right!
You should always have a drip cap.
Hi Shannon. Good Video. I'm in BC and had a question about drip caps or rigid head flashing. Should they be applied above the window but below the trim? or above the trim? or both? and should the ends of the dripcaps be bent up to create end dams or bent down over the edge of the trim or window?
Ideally they should be above the window and if using a trim around the window they should be above that also. In that case the one between the window and trim would be cut to the window width and the upper one can have dams if your siding is something other than vinyl siding or stucco.
So shims on top of the flashing? What keeps the shims from rubbing thru over the years from expansion and contraction?
I think you are over thinking this.
If you use screws you can pull the window out alot easier ( if you need to ) Pulling nails out of those flanges without damaging them is not very fun.
Always enjoy Shannon's videos
If using spray foam inside to air seal, do you do the bottom of the window at the sill? If so, would that inhibit the condensation being able to drip out?
I have never seen those plastic window corners. Where would I find them. Is that something lowes or home depot would have?
Around here Rona and Home Hardware carry them.
I have watched about seven of these installation videos on TH-cam now and this is the first video I've seen that no tape was put down both sides of the window before the window was installed on the rough opening
With a window with a nailing flange the tape on sides and top are done after the install.
HouseImprovements okay that sounds good I think you're still pans probably better than anybody else I've seen them great video
I'd recommend using plastic or scrap pvc for shims, they won't absorb moisture.
With the rigid siding you can caulk all around the window . With flimsy vinyl siding you can't because it moves. Water in a "J" channel should run down to the bottom and over some kind of sill and over siding below the window.
Fantastic video! I feel ready to install my first flange window, which will be done within the hour! Thanks!
Shannon you are the best!!! Thanks so much for taking your time and explaining so well. Its thanks to you that i have installed 5 new windows in my house both flange and brick molding.
I would have only one question. Please help me with a response.
Do you think you need a drip cap on top of the windows when installed this way???
if so where would the drip cap go? On top of membrane or on top of the sheathing then membrane then house wrap.
I have installed only one drip cap so far in one of the windows on top of the membrane and wondering if i should do the same for the rest.
Thanks again Shannon
GOD bless you
Please use my forum for questions. www.house-improvements.com/forums/
Thanks for the quick response in the forum Shannon.
Great forum for everyone that has some diy skills
Can you post the link to the forum with this question please? I can't seem to find it on the website. Thanks
no drip cap needed if window under the roof overhang, use drip cap if two-story house, or no or little roof overhang
Thank you, going to attempt installing a 2x2 window myself... Excellent explanation of the installation!
should you use the primer on the first piece of flashing before putting the second piece on?
No it will stick to its self very well.
Shannon, what is the siding on this house? I am residing my house that has masonite on it. I am adding vinyl. Would you fir out that house you are working on to reside it? What would you use to fir it?
On this house the Masonite was all removed, house wrap added and vinyl siding install right over that.
if i were to replace and old aluminum window on a mobile home with a new construction w/flange just like this one, what should i use to seal the vinyl to the aluminum house on the outside?? I live in western new york and winters can be grueling so i want to make sure they dont leak
The company I work for we always cut off the construction flange instead of nailing it in and just use tap cons in the frame. I suppose the flange is for new construction only? mostly only do remodels, just curious about your thoughts on that
Then you must cover those holes with a plug? I use windows with a renovation brick mould. Here is a video showing me using that type of window. th-cam.com/video/QSHo-_Ja34U/w-d-xo.html
If you have more questions please use my forum. www.house-improvements.com/forums/
Question - how do you attach the corner guards to the sill? I bought a few but since they are very thin plastic, they don't lie very flat. I don't think nailing it will be adequate. Did you use some kind of glue?
I just stapled them to the wall on the outside face.
How do you handle this type of installation on a house with house wrap pre-installed? Specifically the sides. I've seen your other videos where you trim the wrap back an inch from the opening. Do you follow a similar method for these windows with a nailing flange? Thanks for the great videos.
Yes , just like that , the only difference when installing a window with a flange is that the window goes in before the sides and top are flashed with the membrane.
Not sure what country your from but this is not code anymore in Canada. You can use the nailing fin to install the window however the window has to be secured with either screws through the frame or installation clips. Failure to secure the window through the frame will most likely void warrantee.
Can you screw the window on? I’d be worried nails wouldn’t hold the window well enough?
Genius with the sloping silicone.