T-Cycle Bar End Shifter Micro Mount Installation
ฝัง
- เผยแพร่เมื่อ 5 ก.ค. 2024
- Mike Hernandez of T-Cycle shows you how to install the newest product you never knew you needed: The Bar End Shifter Micro Mount. Read more and order your own at t-cycle.com/collections/acces...
Shimano Instructions: 1:22
microSHIFT Instructions: 3:11
SRAM Instructions: 4:12 - กีฬา
Awesome job on the video Mike!
Oh boy, this might just be the answer to a dilema I've been pondering. Old Greenspeed GTO with Sram Dual Drive removed and hub motor installed. I put a twist throttle in place of the right shifter and moved that twist shifter down below it on the stub mount moved from the Dual Drive internal shifter location. Very non ergonomic. Was just looking at bar end shifters to use with the twist throttle but then realized they run the cable housing external to the bar, not internal... that won't work. I could do what you just showed and swap to bar end shifters and change the throttle from a twist to a thumb setup. Looks a bunch more ergonomic. Contemplating Sunrace 10 speed Freewheel with Shimano XT M772-SGS Top normal Shadow Rear Derailleur, KMC X10SL 10-Speed Chain, and Microshift 10 speed bar end shifters. I already have the derailleur as my original derailleur is getting a bit sloppy and doesn't like to stay aligned... plus looking for more wrap as I've swapped my 65 tooth Rans Tailwind front chain ring on. Presently running 7 speeds x 2 rather than the original 9 speed x 3 x 3 and looking for more range on bottom and top end.
haha go mike !
👍🏼👍🏼👍🏼
Are all these setups made to connect to a e-assit motor?
They do a good job of holding a throttle for an electric motor, but you can mount other things. These mounts give you either 15mm or 30mm of mounting space, so if you have a light, a mirror, a GPS, or anything that's fairly lightweight and that has a mounting clamp less than 1-1/8in wide, then you could consider placing those atop your steering controls as well!
@@Tcycleinc I have a Utah Trike Fad Tad Crawler with a Bafang motor using Navincci rear hub. I prefer a thumb shifter.
@@AL_Lopez_101 Does your Fat Tad have bar end shifters? I know that Sunseeker Fat Tads generally come with grip shifts. If you do have bar end shifters, then this might be a great solution for you!
@@Tcycleinc I will have to take a look but I can definitely use it on my Catrike 700, ICE VTX, Catrike Toad, andHP Velotechnic Scorpion Enduro FS. Would you guys be interested in a Zoom meeting with Disabled Veterans that participate in adaptive cycling?
@@AL_Lopez_101 Hey Alfredo. Unfortunately, I don't know if we have the time to spare at the moment. Between the pandemic, the civil rights movement, and the hazardous air brought on by the wildfires, our capacity for work is quite limited. You might contact cycledifferent.com/, as I know they have extensive hands-on knowledge for assistive adaptations!