2009 Infiniti FX35 / QX70 - Warning about changing hub and wheel bearing assemblies! Sensor damage!
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- This effects pretty much all Infiniti SUVs from 2003 to 2020. It is VERY easy to damage the ABS wheel speed sensor when changing these!
The sensor is in the knuckle and the exciter ring is on the back of the wheel bearing. There's also a metal shield behind the exciter ring. It has little windows for the sensor to slip through. The windows were not lined up on the new parts I got. I had to adjust them. Plus, on one side I couldn't get the sensor out. For that one, not only did I have to adjust the window on the new part... but I also had to put it in on an angle so as to not damage the sensor!
Disclaimer:
The information, demonstration and any content contained in this video is for informational purposes only. The user and EUrbanAutoTech makes no warranty, express or implied, regarding the effectiveness or safety of the contents of this video. In no way should the contents of the video, including the tools used, be repeated or tried by anyone. Viewers should only seek the help of a trained professional located at a licensed auto repair shop for any fix, modification, alteration, or any change to their vehicle. EUrbanAutoTech shall not be liable for any injury, damage, or loss to any person or property that may result from use of the tools, equipment, or any content contained in this video. In addition, there is no way to guarantee that the video is not altered or modified or is not in the final form submitted by EUrbanAutoTech and therefore, EUrbanAutoTech does not warrant that the video is unaltered or not modified. The links on this video to products are for informational purposes only and in no way are an endorsement of the safety or effectiveness of the particular product. Viewers understand that anything contained in this video or linked to or from this video is the sole responsibility of the viewer and in no way provides an express or implied warranty as to the safety or effectiveness of any linked tool, product, or video. Therefore, viewer agrees to release, waive, and discharge EUrbanAutoTech or anyone affiliated with EUrbanAutoTech, from any and all liability, claims, demands, actions, and causes of action whatsoever arising out of or related to any loss, damage, or injury, including death, that may be sustained by the viewer, or to any property belonging to viewer, regardless of whether the loss is linked to the use of the contents of this video, or otherwise and regardless of whether such liability arises in tort, contract, strict liability, or otherwise, to the fullest extent allowed by law.
Thanks for the heads up
I have the cheap bearings and will test my patience
Just broke mine thanks man
Really enjoyed video
@paulwashington2743 Awesome, thank you!
Just curious what brand of hub that was? The OEM are so expensive. I was looking at an SKF one.
@user-vt6uf6nl9z I think it might have been a GSP hub. They would be like half the cost of SKF which were themselves much cheaper than a factory part. I worked at this shop for 4+ years. We put a lot of inexpensive hubs in vehicles. Never had to deal with a warranty. How long would they last after a year? Who knows. How long does anything last though? I've changed lots of SKF hubs that didn't look very old. We would always put a SKF or better in anything large like a 1 ton truck but for smaller stuff it's hard to justify $300+ for a hub when you can get one for $80...
@@eurbanautotech Thank you. I found the SKF for my infiniti for $169 cdn. Which seems really good. So I have that on order. Hopefully it does the trick.
@user-vt6uf6nl9z Nice! That's a decent deal for a good product. Just be mindful of the ABS sensor. It's MUCH easier if you can remove it from the knuckle. That way you can slip the hub into the knuckle and make sure the sensor will go through a window before bolting everything down.
@@eurbanautotech After watching your video, yep I'm quite aware of that little pitfall. In Canada they use so much salt on the roads, I'm sure it's going to be a real !@#$%^& to get off. But will see. I sprayed some WD40 on a few days ago. Hopefully that penetrates a bit and loosens it (I doubt it LOL). Thanks.
@user-vt6uf6nl9z Ya, thankfully we don't use salt in BC. Working on occasional vehicles from Alberta are bad enough. I don't think I could handle being a mechanic in Ontario... If the hub is really bad then you can use a bolt and a nut to help pull the hub off the knuckle. You'll want a long bolt that's threaded all the way down its length. Put the bolt through a hole and thread the nut on it so it's between the hub and the knuckle. Hold the nut with a wrench and tighten the bolt so it's pressing against the knuckle. Now when you tighten the bolt more it can't go any further in so it causes the nut to walk up the bolt which pulls the hub off the knuckle.
Of course this will damage the dust shield. Most people aren't concerned about those. It'll also mark up the knuckle pretty good as the bolt will dig into it a lot. If you have an extra hand and feel like fighting with it you can place a piece of metal between the bolt and the knuckle which will protect the knuckle. Old, worn down brake pads work well for this kind of thing. But aside from making a few dents and divots in the knuckle it won't cause any actual damage if you press directly against it with a bolt.
Lisle makes a really cool tool for doing stuff like this. I have it and I love it but you gotta ask yourself how many times you'll use it.
www.lislecorp.com/specialty-tools/40100-hub-remover
USE OEM REPLACEMENT PARTS SON !!!!!!!!!!!!!!!!!!