Whirlpool Washer Not Spinning - Easy Fix
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2023
- Whirlpool washer not spinning and the easy way to fix it. If you have a Whirlpool, Maytag, Kenmore, or Roper washer that looks similar to what you see in this video, there is an easy fix to a no spin problem. Usually if the washer is filling, agitating, and draining but not spinning, the culprit is the shift actuator which switches the washer from agitating to final spin. In this video I show you how to replace the shift actuator to get your washing machine up and running again! Here are the parts I ordered on Amazon for this fix. I also ordered a clutch kit just in case but never ended up using it:
Shift Actuator: amzn.to/3sPkUZM
Pulley Clutch Kit: amzn.to/48eumpJ
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Check out these playlists for more repair videos:
🔌 • Dryer Playlist
🧺 • Washer Playlist
🔥 • Furnace Playlist
❄️ • Air Conditioner Playlist
💧 • Water Heater Playlist
🛠️ • HVAC Tools
🔋 • Capacitor Playlist
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🔦 Awesome Camo Flashlight: amzn.to/33uMECU
🛒 Full Amazon Tools List: amzn.to/2Q3QTOA
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🅿️ Want to Support This Channel? You can donate via PayPal:
www.paypal.com/cgi-bin/webscr...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
📷 Interested in What Gear I use to Film my Videos?
Sony A7SIII: amzn.to/3oqIGDC
Sigma 24-70mm Lens: amzn.to/3t9ZYID
GoPro HERO 8: amzn.to/2Pi0JQO
Extra Batteries: amzn.to/3c8QBj1
Memory Card (2): amzn.to/34rcwQ1
60" Tripod: amzn.to/2mLXrU0
Bird-Eye View Tripod: amzn.to/3b3RWYy
Rode VideoMicro Microphone: amzn.to/2Ol9KDp
Rode Wireless Go Microphone: amzn.to/3ed5Wkv
Neewer Halo Light (2): amzn.to/2LTANUK
Viltrox LED Light Panel: amzn.to/39ZbSu4
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🙏 We would greatly appreciate it if you considered supporting our channel while shopping on Amazon by buying anything you need on Amazon after clicking on one of the links above. This gives us a small commission at no additional cost to you and helps us continue producing more videos! Thanks a million for your support!!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
⚠️ Disclaimer:
This video is for educational purposes. All appliance and HVAC repair work should be done by a trained professional. Word of Advice TV is not responsible for any possible damages or injuries caused by the use or misuse of the provided information.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
📥 SPONSORS / Collabs:
Would you like to partner with Word of Advice TV? 🤝
Email: WordofAdviceTV@gmail.com ✍️
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
#furnace #airconditioner #appliancerepair #heating #airconditioning #hvac #wordofadvicetv #washer #laundry #washingmachine
![หมานแต่ผัวเขา - แสตมป์ โตเกียวมิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/m0g1TSBJPgo/mqdefault.jpg)
➡ Other helpful videos:
How to Order Appliance Parts:
th-cam.com/video/jukoV43DrDw/w-d-xo.html
Top 10 Washer Problems:
th-cam.com/video/lC5eqysbdsk/w-d-xo.html
How to Use a Washing Machine:
th-cam.com/video/Q6JHQK696AE/w-d-xo.html
How to Reset Washer Motor:
th-cam.com/video/3ed8Z1802t4/w-d-xo.html
Most Common Washer Fix:
th-cam.com/video/KmPlBZ5nT1Q/w-d-xo.html
How to Replace Washer Door Switch:
th-cam.com/video/gSLBiHx9VC0/w-d-xo.html
How to Take Apart GE Washer:
th-cam.com/video/D5hr12xcOHo/w-d-xo.html
What Appliance Brand is Best:
th-cam.com/video/ddy06-ssC8w/w-d-xo.html
Hope you’ll do some videos on dryers too!
@febobartoli
I do have some but it would be good to make a few more. Thanks!
I'm an apartment renter and was about ready to buy my own washing machine until I Googled this video. It works perfectly after recalibrating the settings. Thank you.
I'm old enough to remember when appliances didn't break every few years.
Slava ukraine
Thank you so much for posting this video. I have a Whirlpool washer which is three and a half years old. During a wash cycle,
it stopped spinning and made the loudest, horrible, grinding noise I have ever heard. It was out of warranty so Whirlpool, of course, wouldn't offer any help or advice. Oh, they did offer 10% off if I bought another one! Fat chance of ever buying a
Whirlpool again. I have called a serviceman so I'm hoping he can repair it. Thank you again.
This channel is gold, from the repair tips to math tricks, thank you for this 🙏🏼
I just bought my whirl pool washer, the 2 in 1. It washes but doesn’t drain the water completely and leaves my cloths wet after the cycle finishes, but if I switch it to drain and spin it completes the cycle and leaves them dry. What could be the problem ?
Man who did that plumbing - handy man at its finest
very helpful, instructions and sound are very clear. thank you!
Its kind of coincidence that i just did the same with my washer about two weeks ago and now i came across with this video. Thanks jay for sharing your knowledge.
Oh wow, isn't it crazy how that happens! I've had that before too, where I just talked about or did something and then other people start mentioning the same thing.
thanks Jay on the tips on the washer have a great rest of the weekend be safe
Thank you! May you have an amazing rest of the week as well!
Always love your videos brother! Thx
My sister asked grandma for her washer and dryer when she was in her death bed sorta. I asked why and my sister said because grandma has had them for EVER and they never broke or wore out. That was 2017 and they still run great.
You always have good content and ending quizzes, thanks
Glad to hear that! Thank you!
Great Video as always. Thank you for sharing. Have a nice weekend.
Thank you sir! I appreciate you stopping by, have a fabulous rest of the week as well!
Thanks for sharing this ❤
WOW .. interesting to see what goes on with such new fangled clothes washer. I bought my latest clothes washer in Oct 2002 and it is still good; I did have to replace lid switch a few years ago with help of youtube and the blessing of being able to find the needed part. I so appreciate you Jay, and others like you who help people by sharing How To Repair videos on just everything. TY
May your washer last you at least another 20 years!! Thank you for stopping by and leaving a comment, have an amazing rest of the week!
Very helpful thanks
Thanks Jay for the great teaching today 👍 and the four outa 3 , could of thought 4 outa 2😊 lol, and enjoyed the math trick today. God bless you and yours ✝️🇺🇸
You bet! Thanks for stopping by for the new video, glad you liked the math trick! We receive the blessing and may the Lord abundantly bless you and yours as well!
Very Useful, Thank You Very Much.
You're welcome! Glad you found the video helpful!
Great video! This was so easy that I could do it by myself. Thanks Jay! And I love math jokes!
Thank you! 🙂 Oh for sure you would be able to do this one yourself, no problem. Glad you liked the joke! Have a marvelous rest of the week!
At 4:13 in the video, 4 out of 3 people know you turned the knob clockwise.
Hahaha oh dear, I didn't even notice that I said that wrong! Hopefully 4 out of 3 people didn't catch that. 😇
Thanks. Love your content . Helps me alot
You're welcome! Glad to hear you love the content and find it helpful. Have a fantastic rest of the week!
Bud, you said counter clockwise. I’m no genius but I do believe you rotated the knob clockwise. 😑 other than that, pretty helpful video. Preciate ya.
We have a washing machine about 2 years ago it was flooded so we just stored it, tried it today it still works. Its also a whirlpool. Is it safe to use? Don't really know much about em but I could open the inside
I hope the fires didn’t affect u. And I hope u r staying busy. With your skill set u would b busy anywhere. Even Pineapple Paradise. Say hello to your faithful camera person. Who does the editing? Great as always
The fires fortunately have not gotten to Big Island, at least no big ones. Thank you for the concern! Will pass on your greetings to my wife and thank you! I still do the video editing myself. 🙂
Hi, what is the best way to tell if it is the actuator or the motor coupler? Thanks!
Good vid. Thank you sir
You're welcome! Thank you for stopping by, have a marvelous rest of the week!
Fixed my washer problem
Love to hear that! May it run problem-free for many years now.
How can you check it with ohm meter?
Awesome 👍👍👍
Thanks Harry!! You're as legendary as always!
Thank you sir
You're welcome sir! Thank you for stopping by!
I have the same washer but a different problem. The drum does spin but tends to bang the sides of the washer. Even if the load is perfectly balanced is still bangs. Even when empty there appears to be too much play with the drum. You can easily push it from side to side. Any suggestions? Thanks.
nice video
Need help:
🛑 I have a 8 yr old Whirlpool Bravos MCT dryer that randomly stops drying. I have to wait 2-3 minutes until I can have it start up again. I replaced the thermostat 2 yrs ago. New belt last year.
Any suggestions are appreciated!
Can I reset it while there's clothes inside. (2nd hand washer) It's been stuck on Sensing fill. No new piece but is it worth a try to reset it?
Thanks Jay, loves your videos! How can you find different recalibration mode setting for different manufacturers? It seems nowadays manufacturers hide all these setting & informations to keep do it yourselfers away from fixing various appliance problems.
You're welcome! I agree, it does seem like they purposely hide it away. Most of the time the "secret service manual" will be hidden either in the back of the washer, behind the back cover panel or it will be taped on the inside of the washer in the front corner. You would need to disassemble and lift the top to get to it.
Had same issue twice. No spin and wash light on. Found mouse nest under transmission pan where the shift actuator is mounted. The actuator has a speed sensor and the mouse nest was preventing the sensor from reading correctly.
Does the calibration step apply to older models. Mine doesn't have any kind of lights
It varies from model to model but if yours does not have any lights there are probably no recalibration procedures besides just unplugging it for 30 seconds and plugging it back in.
how can I tell if its this part , or the clutch , or motor is burnt on this style of washer?
I think I might have cleaned that cover while I was down there
I really should have but I knew that they were soon going to get a new laundry set anyway so I didn't make the extra effort.
Where can i buy that part?
What if it doesn't drain? It gets to the point where it should drain and stops there. I can force it to drain by setting it on Drain and Spin and restarting. But it still doesn't spin. Again I set it to Drain and Spin and restart again and it spins out. Is it still the same part?
How can I test the actuator?
Is it possible for something to get stuck in the motor? My apartment complex are stating that I have to pay $800 They’re saying that a toy car got stuck in there and I don’t know how that’s possible.
Are all Whirlpool the same.because i can't find that part on My machine
Recalibration sequence:
1) Set back where it was turn on and wait at least 30sec
2) Twist dial counterclockwise one full rotation back to normal
3) Turn three clicks the right
4) Turn one click to left
5) Turn one click back the right
*All must be complete within 3 sec.
LIGHTS FLASHING WILL INDICATE CALIBRATION UNDERWAY
👍
We have replaced this part twice and recalibrated but it still won't spin.
you turn the knob clock wise not counter but otherwise i really liked your video
Just swapped mine but still not spinning 😐
My washer do the spin cycle just when it’s selected but not in normal cycle
I did this and it still will not spin. Help!
One can use a car jack to tip it back
😃👍👍👍
🙂🙏👍♥
This washer has bad suspension rods, The tub was wobbling
My washer only works when is tilt
I've replaced this part and the clutch kit and my whirlpool washer will not spin.
Hey buddy I wrote a long message it may have went to spam
Hi David! Good to hear from you! I was away on a trip so I only got around to answering comments right now. I checked my spam and held for review folders but unfortunately the long message is nowhere to be found. ☹ Sorry about that. I hope you are doing well, greetings and love from Hawaii!! God bless you and yours!
Stuck on sensing
ME TOO Hun...reason is U HV SPEND MORE $!!!!!!
You said 3 clicks counter clockwise, then actually turned 3 clockwise to “rinse”…
Yeah.. Kind of tripped over my tongue there. 😅
@@WordofAdviceTV of course my issue doesn’t seem to be anything stripped out. Ive taken out and cleaned plate. The gears dont seem to damaged and the actuator feels to be good (the machine is only a couple years old). However, it sounds as if the noise is coming from electric motor. It spins, but makes a god-offal noise and tub doesnt spin… 🤔
Great vid Jay ... And as for math , it just didn't add up for me either Aloha my Friend
Thank you Eddy! Haha yeah, math can be tricky. 😄 Hope you are doing well my friend, aloha from Hawaii!! May God bless you and yours!!
This channel is gold, from the repair tips to math tricks, thank you for this 🙏🏼
Hey buddy I wrote a long message it may have went to spam
I got this message and the other one I replied to but not your long one.