Tutorial How To Repair Replace Beats By Dre Studio 3 Not Charging Charger Port
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Send your device in for repair and have the repair ninjas at JoesGE fix it for you 👉bit.ly/2wwrMdQ
Are you a repair ninja? Buy the parts here 👉www.joesge.com/products/beats-studio-3-wireless-charge-charging-charger-port-ic-pcb-repair-kit-parts
Steps to fix your device.
1. Remove the muff
2. Remove the tape from the muff
3. Unscrew the 5 speaker screws
4. Remove the rubber piece from the charger port
5. Heat up the wires and get them out of your way
6. Unsolder the charger port
7. Heat up the charger port and remove it
8. Put in the new charger port
9. Solder in the new charger port
10. Put the speaker back on
11. Screw on the 5 speaker screws
12. Put on the new muff tape [ bit.ly/2GbwUtL ]
13. Put the muff back on
14. Get back to jamming out 🎵
Feel free to reach out to our radical animal-friendly support team with any questions your brain has developed during the watching or pre-gaming of this video:
www.JoesGE.com 📲
Support@JoesGE.com 📩
360.362.1722 📞 (Text or Call)
If you are tired of pre-gaming or talking with our radical animal-friendly support team and find yourself pondering the meaning of electronics as a whole, you can ponder them deeper by checking us out on these platforms for social-ish activity:
Snapchat @joesge
Instagram @joesge
Facebook @joesge
-
JoesGE.com is a pretty cool place (depending who you talk to it might be more than pretty cool. But hey, I'm just writing this down so that it says something down here, because that's more professional right?) and if you're still reading along at this point you might as well sit down and grab some popcorn because this is about to trail on about how we are this premiere repair service located in Washington State North of Seattle in basically the "Armpit of the US" near Mt Baker (Mt Baker has the world record for most snowfall at 1,140 inches in a season). Even though it can smell bad around here we love the fresh air and being near the post office and in a quiet sleepy mountain town certainly gives us much closer access to Team Turtle and Team Beaver (Watch our "Who, what, when and where is JoesGE?" video if you don't get the reference).
All this to basically say that we are all addicted to coffee and stay in the warehouse for ridiculously long hours in order to keep up with the demands of the youth for these two-sided head audio devices and speakers that float when you throw them in the ocean or in your bathtub to test if they actually float. On top of that, we do like it when less stuff ends up in landfills so we hoard everything on shelves with wheels so that we pollute less, it just sits in our warehouse losing molecules slowly over time degrading to become smaller and smaller.
If you are still reading at this point you deserve an award, or a high five, or something because you must either be the most patient person on the planet, or you read blogs frequently. And if the latter is the case, then this whole thing must seem pretty short so let's keep going.
We do some really interesting things here at JoesGE which are frequently documented in our sometimes weekly sometimes never vlogs.
Also, if you are wondering how we keep up with the demands of the people so well, its because 90% of the people that work here are all Russian around getting things done most of the time. Yes, that was a pun, you are welcome. We hope you have a pun-filled day, because who couldn't use a few laughs?
![ผัวเถื่อน - ยูริ โตเกียวมิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/P08ORRVDGl8/mqdefault.jpg)
What size screw driver, I cant find one small enough even got a glasses repair kit.
Great helpful video, thanks.
awesome video. I fixed my expensive head phones. Where did you purchase the tape? I can't seem to find it
Is there a resistance or continuity check for this port to determine this is the issue? Thanks.
I do not know of one
Does the charging port on studio 3 has to be the same part? I accidentally bought the studio 2 charging port on eBay. Will that work?
I do not think those two are compatable.
@@Joesge okay thank you very much
Hi my Beats Studio 3 charging port have a number on them it’s 1743 and I found one online same but different number on them it’s 1750 does the number really matter
I would just get the one off our store. 100% compatible and working.
You can get one here - rb.gy/zpcrox
I have a nfc charger, I wonder if I could dissect the coil and hardwire the coil behind the volume circle 🔎🤔🤺 just lay them down on my chargepad 🙌
Ya think this is possible?
#apple
Awesome video, I try and use blue tape to secure the other pad from moving all willy nilly 😬 too many broken hinges 🤣
Thank You God bless you
You are so welcome!
Wish you were zoomed in more
We've been working on doing that for our most recent videos. Thanks for the comment and suggestion.
Please reply I want to repair it on your website I have beats by Dre studio 2 and my charging port needs replacement what do I choose on problem on your website
Hey, does the studio 3 use the same battery as the studio 2?
Thanks for the comment. Yes, studio 3 and studio 2 headphones both use the same battery.
-David P
How easy would it be just to send them to ur website
Thanks for the comment. If you would like your headphones repaired by a professional you can fill out a repair form and follow the steps to send in your headphones. We offer free shipping and diagnostics. Here is a link to the repair form:
www.joesge.com/pages/repair-services
-David P
Oh my is that heat gun necessary??
I hope there is some one can replace the stupid micro usb charging port with lightning or at least USBC.
We can't do that just yet.
what is the order of the cable cores? Left to right
Hello, thanks for commenting. Please email us at support@joesge.com and we will be able to better help you there.