I can see it now: "And we are here in the cruise ship kitchen with my dad, and today, we're fixing the ice cream machine before the passengers riot." *cue intro music*
Good for you, I almost never took a vacation and man it's so nice when you just do whatever with friends and family 👍 Escalade should be getting really close now...
I've just cut the O2 off above the "nut" and then used a 3/4" breaker bar and socket. Then I'll run an O2 tap through to make sure the threads are good.
You should get a shop like this with a lift. Perfect. Or like VGG. Nothing too huge, just enough to keep warm in the winter and cool in the summer without a $10k power bill
I used to drive taxi in Anchorage, Alaska. I met many people that did the cruises, most said the should have rented an RV and drove around Alaska at your own pace, instead of look here, look there and were moving. Miss Alaska, don't really miss the snow anymore. A bear eating blueberries on the side of the road and a police officer sitting there so people wont get out to take pictures and become part of the food chain.
Hi JR, I have been missing you but you deserve any time off you want to take, you are one of the hardest working guys on TH-cam. Glad you took a little vacation, sorry it didn't go good, but hopefully wasn't as bad as I'm thinking it was. I can't wait for the video on it. Glad you are back and somewhat rested. I like the lights, it really brightens up the place. Now back to watching the new video. Thanks for your content, it's always fun and unpredictable. 😀✌❤
Oh you can definitely do that oil pressure sender with the intake on, and it absolutely SUCKS. The sensor itself isn't bad. Blindly unclipping that plug is a nightmare.
@@deandeanmunoz I was about to say. I did it on my 5.3 Avalanche and besides being scared of dropping the darn thing somewhere never to be found again, the itchy ground up knuckles made it fun for a few days after. But overall, you are spot on, it can be done no problem, but the itchy factor is a real thing!
Same here. I enjoyed the wildlife and seas, but one port town is the same as the next, plus the port excursions are over priced. I did like the Juno museum, botanical gardens and salmon hatchery.
Self care and taking time to recharge is very important. You work insanely hard, JR, and deserve more than just a few days off every few years. Don't forget to pamper yourself too! :) I hope you enjoyed the trip overall! And welcome back.
JR I went through this on my Ls1 motor recently and had to do it the hard way by oulling the tc after the crank bolt came loose. I was so lucky that I had a set of my dad's old craftsman narrow wrenches that allowed me to get up in there and take the flex plate bolts off. I always though those wrenches were silly to have around but amazingly they saved the day, lol.
I've always just used a propane torch and a little 8" pipe wrench to remove O2 sensors from rusty vehicles in Minnesota and I've never had any trouble.
The last video briefly mentioned the new shop but it seems like there wasn't too many details. Westen recently unveiled his new shop and I was hoping to learn more about your new place and the larger strategy going forward like how you did with your first shop. Your first shop unveiling was really interesting and your vision was engaging.
The oil pressure sensor replacement with the intake on is not that bad i pulled the oil screen out of mine when having issues with dod before i deleated it completely
Huge thumbs up John Ross ! Just delighted that You took a break ! So well deserved my friend who I’ve never met . Lol . Alaska is on my bucket list ! Have a great week . Awesome video btw
Buncha entitled whiners here, you deserve a break, JR. You're absolutely right, 4 years of almost non-stop videos and HOW DARE YOU take a cruise!? Get over yourselves, people. JR is one of the hardest working automotive TH-camrs on the platform as far as I'm concerned. Go watch others that never finish projects or take weeks/months between videos if that's more your speed.
JR, my wife bought me an inductive bolt heater for Christmas a couple years ago. Came with a nice selection of coils, it was nowhere near $600 from Amazon. Definitely a timesaver!
@JR hey I have a 2007 caddy Escalade and engine locked up so I was seeing what cheap engine should I put in it and where should I get it from please help
There’s a corded inductor for less than $200. Also, cut the o2 sensor wire and put a box end wrench on it and just replace the sensor. Try impacting the exhaust bolts/nuts IN before backing them out.
I did a 10 day transatlantic cruise on the Celebrity Edge and folks... It was like spending 10 days in an assisted living facility! I swear the average age on this boat was in the mid 70's! Now I don't mind being around older people, but for christs sake~! Half the people on board literally had mobility issues. While it was a nice cruise overall, there was NO partying worth mentioning. Any cruise longer than a week gets seriously geriatric, and Celebrity is a bit staid overall....
Hey I got the $175 1200w induction coil off amazon and it works great. I ordered the 10pc coil kit also which is $40 but I haven't even bent up the ones that came with it yet. The $600 inductor might be more compact but it does the same thing. oh and the 10pc coil kit is $200 for it. (they look the same as the $40 ones) lol
Jr., I lived in Alaska for 16 years, next time just fly to Anchorage and rent a vehicle and see Alaska the best way. You can see Denali Park , Kenai, Seward, Homer, Fairbanks, Glanallen, Valdez, Fairbanks, and much more. Some People take the Ferry from Seattle to Whittier then travel to Anchorage. You can also hire a bush pilot from Lake Spenard or Merril Field and fly over the state. The crusies are a great way to support everyone but Alaskans.
If you think 4-500$ is bad for a bottle of r134a, over here I Norway it’s 1500$ for the same bottle. 300$for the gas and 1200$ in environment fees… if you got it over there its a new compatible gas that’s way cheaper. It’s called r456a.
I'm not usually the safety Nazi, but you need to block those tires in case one of the jacks lets go. A few blocks of wood could avert a serious accident. (I actually had it happen to a good friend of mine. It crushed his head. Yuck!)
I went on an 8 day to the Bahamas last year. I gained 10-15 lbs with all you could eat and drink! We also were trying to figure out how we could live on a cruise ship without our 3 kids. 😂
Hey JR, is there anyway you'd be interested in selling one of the fuel rail crossover pipes? I cannot find one anywhere that isn't just a complete fuel rail which I don't really need lol
@@WatchJRGo I get why you can't tell people because there's crazies out there and even with a Ring doorbell and a security system there's still nothing like being around your house for security. Many people fail to use the best security system their house has --- parking in your garage. Most my neighbors have no idea if I'm home or not because I always park my car in the garage.
Your dad can probably make one of those inductive bolt heaters out of crap left over from rebuilding that ice cream machine.
THIS. Not only would Jr get a new tool, we'd all learn something along the way.
Could add a patent design and sell his version cheaper also make money.
JR with your energy, I'm surprised you weren't helping the crew in the engine room of the cruise ship. 😂
lol..thats so true..
I can see it now: "And we are here in the cruise ship kitchen with my dad, and today, we're fixing the ice cream machine before the passengers riot." *cue intro music*
Good for you, I almost never took a vacation and man it's so nice when you just do whatever with friends and family 👍 Escalade should be getting really close now...
I've just cut the O2 off above the "nut" and then used a 3/4" breaker bar and socket. Then I'll run an O2 tap through to make sure the threads are good.
You should get a shop like this with a lift. Perfect. Or like VGG. Nothing too huge, just enough to keep warm in the winter and cool in the summer without a $10k power bill
I guess an 8 day cruise ship tour might be better than a 3 hour tour that turns into a 3 year stay on Gilligan's Island...
Would have only been 2 weeks if they had killed Gilligan lol
@@deanwinchester7179😂I remember thinking that as a kid.
3 yr stay with MaryAnn doesn't sound so bad.
3yr stay with ginger, I can hear the motor boat running, always nice to see 😊
@@alanrussell6678 Mary Ann wasn't tough on the eyes either, wonder if anyone held her bye her ponytails in 3yrs , LoL
I used to drive taxi in Anchorage, Alaska. I met many people that did the cruises, most said the should have rented an RV and drove around Alaska at your own pace, instead of look here, look there and were moving. Miss Alaska, don't really miss the snow anymore. A bear eating blueberries on the side of the road and a police officer sitting there so people wont get out to take pictures and become part of the food chain.
Hi JR, I have been missing you but you deserve any time off you want to take, you are one of the hardest working guys on TH-cam. Glad you took a little vacation, sorry it didn't go good, but hopefully wasn't as bad as I'm thinking it was. I can't wait for the video on it. Glad you are back and somewhat rested. I like the lights, it really brightens up the place. Now back to watching the new video. Thanks for your content, it's always fun and unpredictable. 😀✌❤
Oh you can definitely do that oil pressure sender with the intake on, and it absolutely SUCKS. The sensor itself isn't bad. Blindly unclipping that plug is a nightmare.
This is 100% true.
And the fiberglass firewall makes for fun itchy spots on your arm for a day or two
Easier to pull the intake. Good time to also torque the vlom plate bolts.
@@deandeanmunoz I was about to say. I did it on my 5.3 Avalanche and besides being scared of dropping the darn thing somewhere never to be found again, the itchy ground up knuckles made it fun for a few days after. But overall, you are spot on, it can be done no problem, but the itchy factor is a real thing!
We’ve taken three cruises. I could never do an 8 day cruise through. By day 5 I’m ready to jump overboard.
5 is a good cut off 💯
Same here. I enjoyed the wildlife and seas, but one port town is the same as the next, plus the port excursions are over priced. I did like the Juno museum, botanical gardens and salmon hatchery.
Welcome back JR!
Self care and taking time to recharge is very important. You work insanely hard, JR, and deserve more than just a few days off every few years. Don't forget to pamper yourself too! :)
I hope you enjoyed the trip overall! And welcome back.
Please get on the Camaro soon dude, that’s the project I’m really waiting for!! ❤
JR I went through this on my Ls1 motor recently and had to do it the hard way by oulling the tc after the crank bolt came loose. I was so lucky that I had a set of my dad's old craftsman narrow wrenches that allowed me to get up in there and take the flex plate bolts off. I always though those wrenches were silly to have around but amazingly they saved the day, lol.
"We" went on a cruise?? How did I miss that?
Take an old kettle and use the metal element as a bolt heater, it would work as youlll control the heat and power.
Even an old coffee maker.
That charger is awesome !
Good on you for having a break , I’m going back to work after having a month off , I don’t like cruise’s
I've always just used a propane torch and a little 8" pipe wrench to remove O2 sensors from rusty vehicles in Minnesota and I've never had any trouble.
600 bucks for that induction heater coil thing? 😲 That's nuts!
Autozone has r134a for 289 a tank I got one this week for work in nc
Hope you enjoyed the relaxation! Been w ya before FT YT so here for anything Cheers 🍻
The last video briefly mentioned the new shop but it seems like there wasn't too many details. Westen recently unveiled his new shop and I was hoping to learn more about your new place and the larger strategy going forward like how you did with your first shop. Your first shop unveiling was really interesting and your vision was engaging.
Even if you love a job you gotta take time away to rest and recharge
Are you going to pull the pan to see the carnage?
The oil pressure sensor replacement with the intake on is not that bad i pulled the oil screen out of mine when having issues with dod before i deleated it completely
Huge thumbs up John Ross ! Just delighted that
You took a break ! So well deserved my friend who
I’ve never met . Lol . Alaska is on my bucket list !
Have a great week . Awesome video btw
Vic's like... SIX HUNDRED DOLLARS?! lolololol
Holy hell those lights are insane. I need sunglasses to watch the video
Buncha entitled whiners here, you deserve a break, JR. You're absolutely right, 4 years of almost non-stop videos and HOW DARE YOU take a cruise!? Get over yourselves, people. JR is one of the hardest working automotive TH-camrs on the platform as far as I'm concerned. Go watch others that never finish projects or take weeks/months between videos if that's more your speed.
Dude - I need lights like that
I put the link in the last video... but it's legit too bright, I have to add the dimming 😎
Yo Randy!
JR, my wife bought me an inductive bolt heater for Christmas a couple years ago. Came with a nice selection of coils, it was nowhere near $600 from Amazon. Definitely a timesaver!
RIP Eric's mullet!
@JR hey I have a 2007 caddy Escalade and engine locked up so I was seeing what cheap engine should I put in it and where should I get it from please help
Another reason I prefer workin on Toyotas and Hondas lol 😂 my 4Runner and my Camry are a breeze compared to big chungus here.
A fellow Toyota owner agrees. 💯👍😉
If you have the oxygen sensor red hot, you are heating the wrong thing!! Heat the nut it screws into, come on John.
Just take a sawzall to the crank that damn flywheel will spin freely then
Let's f'n go! Been missing the quality content!
I sure miss the old shop and you need a Lyft
You should eat fresh ice cream while working
Where can 2003 Escalade 6.0 motor fit on? What style/year truck?
There’s a corded inductor for less than $200.
Also, cut the o2 sensor wire and put a box end wrench on it and just replace the sensor.
Try impacting the exhaust bolts/nuts IN before backing them out.
JR their are two kinds of people: Those who love cruises and those who don't. You and I are firmly in the latter.
Those old speakers in the background are sweet! What are they?
Old pioneers 🍻
yeah, you probably need a vacation to decompress from your vacation! lol
I did a 10 day transatlantic cruise on the Celebrity Edge and folks...
It was like spending 10 days in an assisted living facility! I swear the average age on this boat was in the mid 70's! Now I don't mind being around older people, but for christs sake~! Half the people on board literally had mobility issues. While it was a nice cruise overall, there was NO partying worth mentioning.
Any cruise longer than a week gets seriously geriatric, and Celebrity is a bit staid overall....
Haha, it is 100% a floating retirement home!! 🚢
Hey I got the $175 1200w induction coil off amazon and it works great. I ordered the 10pc coil kit also which is $40 but I haven't even bent up the ones that came with it yet. The $600 inductor might be more compact but it does the same thing. oh and the 10pc coil kit is $200 for it. (they look the same as the $40 ones) lol
Man what a monster job to do without a lift!
JR, I'm doing a 7 day Alaska cruise from Vancouver in early August. Where do you do an 8 day from? Seattle?
Yup, Seattle to Alaska and back through Canada 🍻
@WatchJRGo leaving on the same 8 day royal Caribbean cruise today from Seattle...lol
Jr., I lived in Alaska for 16 years, next time just fly to Anchorage and rent a vehicle and see Alaska the best way. You can see Denali Park , Kenai, Seward, Homer, Fairbanks, Glanallen, Valdez, Fairbanks, and much more. Some People take the Ferry from Seattle to Whittier then travel to Anchorage. You can also hire a bush pilot from Lake Spenard or Merril Field and fly over the state. The crusies are a great way to support everyone but Alaskans.
can you access the manifold bolts through the fender well?
If you think 4-500$ is bad for a bottle of r134a, over here I Norway it’s 1500$ for the same bottle. 300$for the gas and 1200$ in environment fees… if you got it over there its a new compatible gas that’s way cheaper. It’s called r456a.
If theirs no holes in the block rebuild it with forged rods and putt a super charger on it
I know this takes more time but remove the head and oil pan and pull the cylinder and rod
Hello JR 👋
So is the house shop search on the back , back burner now!??
Who's shop are you in now? Is that one temporary or available for many future videos?
Let’s gooooo boys he bac! But he also use jack 😂❤❤❤❤❤❤❤❤❤
Have to use the jack when the motor is wac 😂
@@WatchJRGo 😂
Always take your vacations
R134 is expensive but R1234YF is insanely expensive.
Wrenching in Crocs must be the new thing...
Lights….and mad, mad echo!
Did you ever finish swapping in the seats in the Escalade?
Wtf man you can't just take off like that. I've been calling every hospital. And your eating ice cream with hoovies
lol this had me rolling
The Caddy is putting up a good fight.
Is Motool better than Royal Purple HPR ?
I'm not usually the safety Nazi, but you need to block those tires in case one of the jacks lets go. A few blocks of wood could avert a serious accident. (I actually had it happen to a good friend of mine. It crushed his head. Yuck!)
Chevy renew/ live again. Nice.
Who else remembers when JR could do an engine swap in one video those were the days
Where is the Lift John - When wil it arrive? 🙃😉
Good Evening John Ross
It's time for new shirt designs. 😊
I went on an 8 day to the Bahamas last year. I gained 10-15 lbs with all you could eat and drink! We also were trying to figure out how we could live on a cruise ship without our 3 kids. 😂
What caused the engine to lockup ? I missed the other video(s) about the Escalade.
Good luck
I have to have one of those battery chargers!
Just buy a miniductor already, they are such a gamechanger
Eric needs a channel called Watch Eric Help JR Go 😬
Always good to watch you guys wrenching
Hey JR, is there anyway you'd be interested in selling one of the fuel rail crossover pipes? I cannot find one anywhere that isn't just a complete fuel rail which I don't really need lol
Nice job, not that easy👍
I had a feeling that you were taking a vacation.
It was about time 🍻
@@WatchJRGo I get why you can't tell people because there's crazies out there and even with a Ring doorbell and a security system there's still nothing like being around your house for security. Many people fail to use the best security system their house has --- parking in your garage. Most my neighbors have no idea if I'm home or not because I always park my car in the garage.
@@Cartier_specialist Doesn't help when he put it on Twitter though lol
5:10 I see what you did there!
Holy bright
Those jack stands look kinda sketchy! And, it looks like your creeper has seen better days. Is a lift in the near future?
Acoustic panels needed stat.
Should have used the Golden Ratchet, that would've got the bolts out.
If you have a smaller shop - are you making more money - not burning through utilities from your old HUGE (Largest on TH-cam) shop?
Oh yeah, this is way better 🍻
When you going to have your own shop again. Update
When are you going to get another shop JR?
How do you gauge video progress without a train schedule now?
You had it to a rhythm at the old shop..lol
in tagalog (filipino) wala means "nothing"...in french Voila (with a hard v) means "there (here) it is"
You know once you get it out we want to see what lies under the oil pan!
You can pull the trans out with it and not damage anything!
@watchjrgo3 Selected for what haha
I DO THOSE OIL SENDING UNITS IN 15 MINUTES
Try 1234yf 🤣🤣
So expensive, not to mention a totally different recovery machine
Gabe could loosen that with 2 fingers
Awesome!!
I hope you mostly enjoyed your cruise. 😬
Can we get a shop update?
is the new shop at dads business
Is this your new shop, Have I missed something on a video ?