1. ADM UIC MOD 2 is my go to. 2. DDM4A1 3. BCM 14.5 4. LWRC All four guns are all great but the ADM just feels better and seems to be the best built. All run an Eotech Exps3:2 and G45 I have B&T suppressor and two surefire RC3 All are great cans
13:56 is extremely relatable lmao, i always tell myself that my gun is done, then i find something i like and that leads down a rabbit hole of completely re doing everything 😂😂
I like your top 3, my three guns for home defense, a Genesis 12 SBM 10.5" Echotech, JK Breacher suppressor / 300blkout high-end build with Holson Green dot, Thunder Chicken suppressor, / 3rd as of right now my MXP K with Modx9 suppressor but will getting a 6.8 blackout with a suppressor that will move into the top 3
My Larue OBR is probably my “FAVORITE” but I love my BCM DD LWRC As well I think ima stick with my four horseman and not replace or add anymore, I honestly don’t need it
I would love to get some more guns when the channel starts making some money. And the Dirty Dave would be dope! I just found that can recently. The SCAR might be a while unless someone sends me one to review. But the Dirty Dave might be something I could scoop in the near future.
I weirdly don't like any of the Aimpoint optics.. Just never been able to jive with them. I much prefer EOTechs or a nice LPVO. I've been looking at the Knights Armament guns a lot recently.. Trying to decide what to get. Both my ARs are just shitty low-mid-tier guns that I've shot the piss out of for the last 8 years (only came to the US 8 years back) but I really want to get one I can trust. Love how your AR is setup man, looks sick.
Yea, everybody has their preferences for sure. I don't really care for a lot of their optics with the exception of the ACRO that I do like. If I were to make any suggestions for what KAC to go for, I'd say the CQB is my top pick for sure. It's got enough reach for me personally. It's compact enough to be a truck gun. And it's a very well-balanced and smooth shooting gun. If you're into LPVOs more, you may wanna go for the 14.5, though. It's hard to find but worth the money from what I hear. It's on my list to get soon. If you don't mind the extra length, the 16in SR 15 uppers are almost always available for significantly less than the CQB and 14.5. Make sure you get the 3.2 whatever you decide to go with 👌🏻
You should really check out a super duty 11.5 one of these days. Mine has about as many rounds thru it as your sr15 upper. No malfunctions and also has been suppressed most of its life
I like your shotgun... I ❤ Knight's Armament Co... and I came up with the suggestion for their company slogan... "When your life is on the line... Only the Finest will do..."
I have a gen 12 too it doesnt take fiocchi, its a malfunction every round. I have actually shot every brand through it. Not as reliable as people think and no i didnt get a lemon just honesty.
@ Fiocchi shooting dynamics 2-3/4 7/8 8oz. Reached out to Genesis as well they confirmed fiocchi isnt a good match. Granted i only had it 2 weeks and shot just a bit over 1k rounds really wish mine took fiocchi. Going to make a vid about federal vs fiocchi in it because even some federal gave me a hiccup or two.
Per your comments on the Knight SR-15, you mentioned that the lower is unimportant to your build other than a collectability standpoint. I am going to build a new ARP and wanted to know if it's really worth my money to spend on a different lower other than PSA or possibly one of those cheap polymer lowers. I was about to buy a Complete PSA lower and mate it to a better upper receiver but let me know your thoughts, is the brand of lower actually important if it's a just a standard Milspec M4 lower?
In my opinion the stripped lower is probably the least important part when it comes to the overall functionality of the gun. I have bought PSA lowers in the past and never had any issues. That being said there are for sure some "gucci" ambi lowers that I much prefer over a standard mil spec. However, If you are on a budget I wouldn't spend the money on a lower rather spend it on a good solid upper with a good trigger/ buffer and spring setup with a good optic. I wouldn't necessarily go any cheaper than PSA lower, like don't go out on amazon buying gun parts lol. But you should be solid on a PSA or standard mil spec lower. Aero Precision makes some nice ones as well that are also inexpensive.
@0nlynate If you're after gas mitigation but not at the sacrifice of sound suppression, the WB is a great option. It's not the quietest thing out there, but it is fantastic at back pressure. And the flow 556k is the best at gas just a bit better than the WB, but it's not very quiet.
So, granted, I only have a sample size of 1, but in the only visible brightness setting, I believe it was 9 or 10 outside. There was a gigantic red ring around the outside that was extremely distracting. Likely just a bad glue job. But in my humble opinion, it's not a problem I expected with one of the most expensive dots on the market. Maybe I just have ADHD but I couldn't get over it. My cheaper Trijicon MRO never had that problem. The ACRO I absolutely love, and now with the C-2 I see no reason to buy a T2 personally.
Simple hand saw from harbor freight. Something with fine teeth so it slides easier, not big huge teeth for wood. Then I sand it down a little bit and you're good to go. Works best if you have a vice to mount and hold the grip or the upper with the grip installed.
@barry20181 Yea I also liked how tight the fitment was 🤌🏻 And I'm not sure about that Hux on the Benelli. When all else fails, I always check reddit. The odds are that somebody has thought of it before or tried it.
I only had a sample size of one in all fairness but mine had a gigantic red ring around the outside at the lowest visible brightness level, and that was outside as well. Likely a defect and simply a shitty glue job but not what I expected from one of the most expensive red dots on the market. The ACRO however is my favorite red dot.
1. ADM UIC MOD 2 is my go to.
2. DDM4A1
3. BCM 14.5
4. LWRC
All four guns are all great but the ADM just feels better and seems to be the best built. All run an Eotech Exps3:2 and G45
I have B&T suppressor and two surefire RC3
All are great cans
13:56 is extremely relatable lmao, i always tell myself that my gun is done, then i find something i like and that leads down a rabbit hole of completely re doing everything 😂😂
I appreciate the end of the video Tyler, that really means a lot. Keep up the hard grind brother
I appreciate you watching all the way until the end! Thank you man 🙏🏻
Excellent picks my dude, that mp5 really gets my motor running
WHAT?! You don't have the Tommy Built on this list? 🤣
😭
🤣💀
I read your comment as “you HAVE a Tommy Built on that list?!” haha
😂🎉
Cause they loom good, but are complete disasters as far as reliability if you actually use your guns
I like your top 3, my three guns for home defense, a Genesis 12 SBM 10.5" Echotech, JK Breacher suppressor / 300blkout high-end build with Holson Green dot, Thunder Chicken suppressor, / 3rd as of right now my MXP K with Modx9 suppressor but will getting a 6.8 blackout with a suppressor that will move into the top 3
What a killer setup man! That's awesome! MPX is sick I want to get one eventually. What's your go to light setup?
My Larue OBR is probably my “FAVORITE” but I love my
BCM
DD
LWRC
As well I think ima stick with my four horseman and not replace or add anymore, I honestly don’t need it
You’da man Tyler…. Even if you are a Jar Head 😂!
⚓️ Anchors away 💨
Thank you for your service
@@richiev74100 🙏🏻🇺🇲
Great vid keep it up broski
Thank you!!
everyone should try the K2 XL grip, I think you would like it
Would love it if you could get your hands on a 300blk scar 15p, I’m amazed I can’t find any videos on it. Also the cat dirty Dave
I would love to get some more guns when the channel starts making some money. And the Dirty Dave would be dope! I just found that can recently. The SCAR might be a while unless someone sends me one to review. But the Dirty Dave might be something I could scoop in the near future.
I weirdly don't like any of the Aimpoint optics.. Just never been able to jive with them. I much prefer EOTechs or a nice LPVO. I've been looking at the Knights Armament guns a lot recently.. Trying to decide what to get. Both my ARs are just shitty low-mid-tier guns that I've shot the piss out of for the last 8 years (only came to the US 8 years back) but I really want to get one I can trust. Love how your AR is setup man, looks sick.
Yea, everybody has their preferences for sure. I don't really care for a lot of their optics with the exception of the ACRO that I do like.
If I were to make any suggestions for what KAC to go for, I'd say the CQB is my top pick for sure. It's got enough reach for me personally. It's compact enough to be a truck gun. And it's a very well-balanced and smooth shooting gun. If you're into LPVOs more, you may wanna go for the 14.5, though. It's hard to find but worth the money from what I hear. It's on my list to get soon. If you don't mind the extra length, the 16in SR 15 uppers are almost always available for significantly less than the CQB and 14.5. Make sure you get the 3.2 whatever you decide to go with 👌🏻
@@JuiceyMedia1 The SR-15 is what I was looking at but I wouldn't mind something that's 11.5 - 14.5. Thanks for the tips man. Subbed.
@@DeimosPC No problem! Can't go wrong with either of those. I appreciate it! 🙏🏻
Great video, refreshing change up
Thank you! Glad you liked it! 🙏🏻 Might have to do another
Great choice in weapons, dude. Buy once cry once.
My KAC 11.5 is sub moa with decent ammo... It's set up very similar to yours and is also my go-to gun.
You should really check out a super duty 11.5 one of these days. Mine has about as many rounds thru it as your sr15 upper. No malfunctions and also has been suppressed most of its life
Yea, a Geissele is for sure on my buy list. They make great guns 🤌🏻
I like your shotgun... I ❤ Knight's Armament Co... and I came up with the suggestion for their company slogan... "When your life is on the line... Only the Finest will do..."
Commonsense builds, there should be more of this - premium where you need it, std everywhere else.
Thanks guys! 🙏
Very nice !
Thank you!
Semper Fi, fellow belleau woodsman!
Hey man Motor T is still important at the end of the day. Happy birthday
How else would the troops get anywhere?
the homie! 😎
Tyler, first: Nice video! and second: Do you know the exact length of the handguard? Because in the official website they does not specify it.
@Bistuer Hey thanks man! What handguard are you asking about?
@JuiceyMedia1 Sorry, the Knights Armament one!
@Bistuer Oh I believe it's 11 inches. It's the URX 4 that comes with the CQB.
@JuiceyMedia1 Thanks Juicey, hope you can keep up with this great quality videos!
@Bistuer Thanks man! I plan to 🙏🏻
nice vid, well paced. well your opinion started with a KAC, so at least you have good taste. lol subscribed
The gen 12 recommendation service interval is like 912 rounds
@NoStepOnNeck yea I'm going to see how long it'll last no cleaning
Great vid! But I gotta know about your swivel rocking chair. Got a link for it? Has it held up for how long you've had it?
I have a gen 12 too it doesnt take fiocchi, its a malfunction every round. I have actually shot every brand through it. Not as reliable as people think and no i didnt get a lemon just honesty.
@MyShadowSide What Fiocchi doesn't run in it? I'll see if I can replicate it in mine. I'm using Defense Dynamics low recoil buck and it eats it up.
@ Fiocchi shooting dynamics 2-3/4 7/8 8oz. Reached out to Genesis as well they confirmed fiocchi isnt a good match. Granted i only had it 2 weeks and shot just a bit over 1k rounds really wish mine took fiocchi. Going to make a vid about federal vs fiocchi in it because even some federal gave me a hiccup or two.
Hello Grandpa Juicey!
🤣
sweet machines 👍👍👍 do you have a ammo sponsor? 600 rounds per week ain't cheap lol keep the vids coming 🇺🇸
Per your comments on the Knight SR-15, you mentioned that the lower is unimportant to your build other than a collectability standpoint. I am going to build a new ARP and wanted to know if it's really worth my money to spend on a different lower other than PSA or possibly one of those cheap polymer lowers. I was about to buy a Complete PSA lower and mate it to a better upper receiver but let me know your thoughts, is the brand of lower actually important if it's a just a standard Milspec M4 lower?
If the lower is in spec, they’re all the same. Rock that PSA lower and save some cash on the build to put somewhere else
In my opinion the stripped lower is probably the least important part when it comes to the overall functionality of the gun. I have bought PSA lowers in the past and never had any issues. That being said there are for sure some "gucci" ambi lowers that I much prefer over a standard mil spec. However, If you are on a budget I wouldn't spend the money on a lower rather spend it on a good solid upper with a good trigger/ buffer and spring setup with a good optic. I wouldn't necessarily go any cheaper than PSA lower, like don't go out on amazon buying gun parts lol. But you should be solid on a PSA or standard mil spec lower. Aero Precision makes some nice ones as well that are also inexpensive.
Man i love that first rifle can you drop the full build specs for it?
He verbalized it bro
Now go to Piece of Mind Guns and get the CAT AlleyCat 9mm for that MP5
That would be sick, I know it's dumb quiet it's just so long of a can. I wanted to keep the build compact.
What’s the front hand stop your running all both guns ??
That's also an Arisaka it's just their Handstop. Bought it a long time ago. I'm not sure if they're still available, but it's a solid product 👌🏻
hey boss- torn on 556k or cat wb - Is the cat wb the real deal? Coming from an RC2
@0nlynate If you're after gas mitigation but not at the sacrifice of sound suppression, the WB is a great option. It's not the quietest thing out there, but it is fantastic at back pressure. And the flow 556k is the best at gas just a bit better than the WB, but it's not very quiet.
@ thank for the reply! Id be running it on a sr15 11.5 as well. I think im gonna go CAT. Thanks so much!
@0nlynate No problem! Idk if you have a store in mind yet, but Bauer Precision has them in stock still in the same configuration I got mine.
@ I was looking at that! Are you running the spooky 1? That’s what I’d do to
@0nlynate Yep I'm running the factory QD spooky mount.
Oh thank god I was going through withdrawals 😅
🤣❤
CAT clan. We are a superior race. WB TI
@@Nfoust for sure some killer products 🤌🏻
How come you don’t poke the t2?
So, granted, I only have a sample size of 1, but in the only visible brightness setting, I believe it was 9 or 10 outside. There was a gigantic red ring around the outside that was extremely distracting. Likely just a bad glue job. But in my humble opinion, it's not a problem I expected with one of the most expensive dots on the market. Maybe I just have ADHD but I couldn't get over it. My cheaper Trijicon MRO never had that problem. The ACRO I absolutely love, and now with the C-2 I see no reason to buy a T2 personally.
What did you use to cut ur b5 grip?
Simple hand saw from harbor freight. Something with fine teeth so it slides easier, not big huge teeth for wood. Then I sand it down a little bit and you're good to go. Works best if you have a vice to mount and hold the grip or the upper with the grip installed.
is your CAT WB the Hub or QD version?
I got the QD
Ok. Thank you. I like how it fits super tight to the hand guard. I’m going to take my CGS sci six off my SR15 and switch to this.
Can I put that Huxwrx Suppressor on my Benelli M4 SBS?
@barry20181 Yea I also liked how tight the fitment was 🤌🏻 And I'm not sure about that Hux on the Benelli. When all else fails, I always check reddit. The odds are that somebody has thought of it before or tried it.
Ok. Thank you.
title should be top 3 ar15s I own lol
Lol yea they kind of are all ARish now that you point it out 😂 Same same but different.
2nd one is not an ar
First gun you bought 5 years ago so I guess you’re 23. Mine was a Chinese sks for $100 in high school.
@turboMATRIX03 haha nah man the first gun I bought myself was 9 years ago. It was a glock, my first AR was about 5 years ago.
AK 47 the best. Go2 gun!
Why don’t you like the T2?
I only had a sample size of one in all fairness but mine had a gigantic red ring around the outside at the lowest visible brightness level, and that was outside as well. Likely a defect and simply a shitty glue job but not what I expected from one of the most expensive red dots on the market. The ACRO however is my favorite red dot.
what picatinny rail mount is in the sp5?
thats a b&t mount
MP7 ?
When HK releases the civilian version, you bet I'll be on that shit like Oprah on a ham.
@ get ready to sell your organs for it 😂
I had a clone mp5 (century duhh) and it was absolute garbage, nothing but problems for thousands of rounds.
You look like scrim.
@taylorfreeman5504 Lol, not the first time I've heard that. I listen to those guys, so I'll take it as a compliment 🙏🏻🤙🏻
@@JuiceyMedia1 not a bad thing I’ve just never seen your channel and had to look a couple times lol.
Helmet covering?
Stolen Valor?????? WTF???????????
I think they misunderstood the post or thought it wasn't me lol
second
🙏
You are actually the last comment when one selects “Newest” order = you are the first comment.
@@J.Young808 kid its a joke who cares
Knights gheeeeeeeeeyyyyyyyyyy
Why don’t you like the T2?