@@JaayPeeBuilt oh, your down there with deadbeat garage awesome, that tree tree was nice as hell to though lol. It reminded me of my old one I planted back in utah lol. Love the videos bro. Hope to see more nice scenery along with the coupe
gotta give props for even remembering where everything goes 😂 Good job looking forward for all the future videos and Definitely gonna reference the old ones
stoked to find a current build. building mine now, should have done it when i was younger and parts were available. finding parts for this car is getting difficult. looking for a f22a engine is seeming impossible
I happened to notice your exhaust laying on the ground. if you get a chance could you grab a measurement of the two pipes that come off the manifold. looking for a center to center measurement. and stock is 1.75 per tube correct?
Quick tip for lower ball joints, if you leave the coilover/stock suspension in and then Jack it up like you did, the pressure of the spring will push down on the lca and make it easier to pop free
Approximately how much time would it take to pull an engine out of stock setup ? obviously you're familiar with doing it but roughly what do you think ?
I have yonakas in my cb7, they're basically identical to f&f coilovers but cost less. I've had mine for over 6 years, no problems and they ride great. I'd like to try some fortune auto coilovers eventually
@@JaayPeeBuilt forsure yeah mine I had to bore them out as well but idk why I’ve heard that rpf1s don’t clear the Rl caliper set up. I was thinking 17x8 35 or the 17x8 45 which will basically sit same as my tl wheels. Same specs pretty much.
@@cb7bakes ef UCA’s…. ESP is pretty much the only company that makes adjustable UCA’s specifically for the CB ,CD chassis… but they’re big and I’ve heard bad things about them…
Yo! I found this extremely helpful. I was in a wreck myself in my cb7 and I’m currently rebuilding my front suspension. Keep up the great content 🤝🏾
Damn sorry to hear that hope it’s coming along well! And thanks I appreciate it
You got nice grass bro!! I'm jelly!! I wish I had that and a driveway to work on my car lol
It’s fake grass… grass is too hard to keep up with here in Phoenix😂😂
@@JaayPeeBuilt oh, your down there with deadbeat garage awesome, that tree tree was nice as hell to though lol. It reminded me of my old one I planted back in utah lol. Love the videos bro. Hope to see more nice scenery along with the coupe
gotta give props for even remembering where everything goes 😂
Good job looking forward for all the future videos
and Definitely gonna reference the old ones
At this point I’ve taken cb7’s apart so much I have to know hahaha
love this channel thank you
Loving the revival of the cb7. Sorry all the hard work in the sedan has ended but the coupe is looking great.
Yeah it’s just a huuuuuuuuge setback
stoked to find a current build. building mine now, should have done it when i was younger and parts were available. finding parts for this car is getting difficult. looking for a f22a engine is seeming impossible
Yeah Fr… better off finding a cb7 donor and get the engine out of that
I happened to notice your exhaust laying on the ground.
if you get a chance could you grab a measurement of the two pipes that come off the manifold.
looking for a center to center measurement.
and stock is 1.75 per tube correct?
What are your upper control arms called or where did you get them from
nice video!
What car are those control arms for?
Quick tip for lower ball joints, if you leave the coilover/stock suspension in and then Jack it up like you did, the pressure of the spring will push down on the lca and make it easier to pop free
That’s what I did…. but that isn’t enough most of the time… old ball joints that haven’t been separated in a long time will need more than that
@@JaayPeeBuilt sometimes yes, just part of the game…
What ucas do you use bro ?? I just lowered my car and I can’t find any
Approximately how much time would it take to pull an engine out of stock setup ?
obviously you're familiar with doing it but roughly what do you think ?
Give yourself like 8-10 hours
How much camber do you run with those s2 uca when they are maxed out?
I think -1.5 to -1.8 I can’t remember off the top of my head
what upper control arms are those
?
I have all you're windows sun roof trim ect..
Dope👌🏼.
How do you like those coilovers? I am debating on whether to get those for my cd5 or get Ktuned
They serve red me really well… but I’m looking into ksports next
I have yonakas in my cb7, they're basically identical to f&f coilovers but cost less. I've had mine for over 6 years, no problems and they ride great. I'd like to try some fortune auto coilovers eventually
@@JaayPeeBuilt fo sho cool thanks man
@@оначертовасука oh I’ve heard of yonakas. Fo sho man thanks. I think im leaning towards the Ktuned. But I’ll check out those coilovers you mentioned
How you doing bro? Quick question what specs are those enkei and have you tried running them with no spacer? Do they clear the Rl calipers? Thank you
They’re 17x8 +45 and they clear the calipers by like a mm with no spacers
@@JaayPeeBuilt thank you very much bro. Running 350z brembo Edition rotor right?
@@alanbatista87 yessir but I had to get the center bored over to fit the odyssey knuckles if I remember correctly 71.2mm center bore
@@JaayPeeBuilt forsure yeah mine I had to bore them out as well but idk why I’ve heard that rpf1s don’t clear the Rl caliper set up. I was thinking 17x8 35 or the 17x8 45 which will basically sit same as my tl wheels. Same specs pretty much.
What UCAs are those?
skunk2
@@JaayPeeBuilt are they the EF/DA ones? Or they made for CB
@@cb7bakes ef UCA’s…. ESP is pretty much the only company that makes adjustable UCA’s specifically for the CB ,CD chassis… but they’re big and I’ve heard bad things about them…
@@JaayPeeBuilt looking to use them as well anything you had to do to run them?
What’s your opinion on those UCA’s? How did the car handle?
Love the cb7 content bro! Do you have any plans for the tail lights on the sedan? If not I would love to buy them from you, lmk 👍🏼
They’re already on the coupe
@@JaayPeeBuilt you wanna sell the 90’s 1’s? Lol
@@juandet313 they’re already sold:(