THANK YOU FOR ANSWERING THE QUESTION IVE BEEN ASKING FOR MONTHS NOW OMG. i knew you’d get negative camber from just swapping factory UCAs. just got another 93 coupe
I didn’t want to like this video! I know how hard it is to let go of a car you love! I still remember the first time I seen Stella at EIG. I remember thinking “Damn nice CB7!” Sad day! But on to bigger and better things! Can wait to see what you do with the coupe! 💯
Hey so I have a f23a4 bottom end with f22a6 head, f22a6 intake manifold and the 1990 5 speed in my 1990 ex, my current ecu is going out and wanna switch over to a stand alone ecu or chipped ecu with a base tune so I can learn to tune my own car as I build a similar N/A build as what you have. Currently my ecu is taking a major crap and locks the rpm at 3k (acts like it’s hitting rev limiter) once in a while and also I have issues with it now misfiring at idle. Also my speedometer stopped working, I did pistons, rings, bearings, gaskets and seals on the f23 bottom end and replaced the fuel injectors, fuel pump, and fuel filter too. I don’t get why the engine is running so bad and I’ve been told it’s my ecu going out also no check engine light at all…
Try a known good stock ECU or like you may already know switch to chippable ecu & get it tuned. Best of luck, I like the OEM build, I'm doing similar f23 bottom, f22a head, h23 intake manifold(maybe a k rbc) and b series trans
Tein Super streets or performance! You can lay the car on the ground if you wanted too! You can also get the EDSC Damper control! To control roll over from the cock pit. I’ve had a dozen different suspensions since 2000 and Teins are by far the best in affordable fully adjustable coil overs,i promise you! BTW It sucks this happened! All that work! I feel you my man!
I’m just starting my build on my cb7 93 accord 5 speed just looking for some tips to make it a little quicker and these videos on suspension are helping me a lot being as all the same parts are original with 245 k on the body
godspeed megan racing and truheart all make upper control arms that are fully adjustable. I did research and any of the 90-97 suspension parts should fit.
also a more basic brake upgrade for those of you who dont know the wagon has larger calipers and rotors and pads too. I did a break swap to a coupe from a wagon and found this out.
@@JaayPeeBuilt i think it may i dont recall it was on my first accord none the less going from stock to the wagon breaks made a huge difference. im also looking into swapping my interior with the 96 acura cl leather package!
THANK YOU FOR ANSWERING THE QUESTION IVE BEEN ASKING FOR MONTHS NOW OMG. i knew you’d get negative camber from just swapping factory UCAs. just got another 93 coupe
Oh yeah for sure easy way to add -camber
I didn’t want to like this video! I know how hard it is to let go of a car you love! I still remember the first time I seen Stella at EIG. I remember thinking “Damn nice CB7!” Sad day! But on to bigger and better things! Can wait to see what you do with the coupe! 💯
Thank you I want to keep the cb7 chassis community alive🙏🏾🙏🏾🙏🏾🤞🏾💯
Hey so I have a f23a4 bottom end with f22a6 head, f22a6 intake manifold and the 1990 5 speed in my 1990 ex, my current ecu is going out and wanna switch over to a stand alone ecu or chipped ecu with a base tune so I can learn to tune my own car as I build a similar N/A build as what you have. Currently my ecu is taking a major crap and locks the rpm at 3k (acts like it’s hitting rev limiter) once in a while and also I have issues with it now misfiring at idle. Also my speedometer stopped working, I did pistons, rings, bearings, gaskets and seals on the f23 bottom end and replaced the fuel injectors, fuel pump, and fuel filter too. I don’t get why the engine is running so bad and I’ve been told it’s my ecu going out also no check engine light at all…
Try a known good stock ECU or like you may already know switch to chippable ecu & get it tuned. Best of luck, I like the OEM build, I'm doing similar f23 bottom, f22a head, h23 intake manifold(maybe a k rbc) and b series trans
Tein Super streets or performance! You can lay the car on the ground if you wanted too! You can also get the EDSC Damper control!
To control roll over from the cock pit.
I’ve had a dozen different suspensions since 2000 and Teins are by far the best in affordable fully adjustable coil overs,i promise you!
BTW It sucks this happened! All that work!
I feel you my man!
I’m just starting my build on my cb7 93 accord 5 speed just looking for some tips to make it a little quicker and these videos on suspension are helping me a lot being as all the same parts are original with 245 k on the body
godspeed megan racing and truheart all make upper control arms that are fully adjustable. I did research and any of the 90-97 suspension parts should fit.
I have a 92 CB7 Sedan with an F20B (Hondata ECU) and 5 speed MT W/LSD. Needs a tune, tune up, and fluids changed to be good to go.
Damn that’s dope bet it’s a ripper
@@JaayPeeBuilt It's sitting in the driveway at the moment, I'm actually looking for a home for it since I rarely use it.
@@dean07252000 where u from?
@@xannyphantom4164 Out by Fort Hood, TX
also a more basic brake upgrade for those of you who dont know the wagon has larger calipers and rotors and pads too. I did a break swap to a coupe from a wagon and found this out.
They come with 2 piston calipers right? I think the odyssey calipers are also around the same size.
@@JaayPeeBuilt i think it may i dont recall it was on my first accord none the less going from stock to the wagon breaks made a huge difference. im also looking into swapping my interior with the 96 acura cl leather package!
I'm struggling and I'm only trynna find a shifter cable 😭😭😭
When I ripped mine yearsss ago I couldn’t find cables. So I started running the ktuned shifter with the ktuned race cables
How much did you get for the sedan?
Not much at all…. Just wanted it gone:(
So what r u going to do with the F22/23 now ?
It’s going in my cb7 coupe
ITB F22a / F23a Engine Teardown - How Was it Running - EP. 47 - 92 Honda Accord
th-cam.com/video/8oGvFrjGZwo/w-d-xo.html
Rip to the sedan I had one catch fire after swapping it haha, the engine saved another car so its all good.
Damn that’s tragic
Same h22 swap bo fan relay but im back with a sedan an a coupe
Did you miss the rear window visor?
Yeah it was just a cheap eBay one and for some reason I don’t really like them on the coupes so ehhh I just let it go
@@JaayPeeBuilt I have everything you need for that car. Glass trim really anything like that.
Bro let it go with the rear window visor 😢 pretty hard to find right now
Struggle city