You should also check out the FlexRC Colugo 3" particularly if you're going to build yourself. I think it's TPU accessories and mounting of the air unit are even better than the DC3. I think using iFlights DJI 20x20 stack with it is the best all around setup.
I've been loving my DC3 since I rec'd it 2 weeks ago. Worth every penny. I contaced IFlight in regards to provides STL files to print spare TPU parts.. They basically said NO FYI.. I'm using a 750mah 4s pack and the total weight is 259 grams.. FAA be damned :)
heya. Im interested in this drone and have no idea about fpv. In Europe we must register every drone (even 250 ones)... another user uses a 650 4S lipo and has a 249gr weight.. can you lower the weight even more to fix a 11gram strabo light and register plate?
Do you recommend this as a good 'starter' quad for someone new to the sport? Are the alternate antenna you've mounted really necessary? Also, I want to use the DJI radio...in that case, what set-up do you recommend? thanks!
You can just press the record button on the goggles. You have the option in the goggles menu to record to air unit only, goggles only, or both at the same time.
The frame. I prefer H frames over dead cats because they're easier to tune and feel more locked in on the roll axis. I just picked up the H3, there's a quick review of it on my channel.
Hi. Thanks for your rewiew. I am interested in this frame but I am hearing criticism that it is not very resistant to shocks and immediately breaks. Can you give me your opinion? Thank you
I want one so bad so I'm saving up my money. I have only been flying fpv for the last 5 months. I haven't invested in fatshark goggles (I fly with the ev800d). So as a person just getting into FPV, I'm going straight to digital.
Im in the same boat. EV800d. Running a qx7 w/ upgraded gimbals. Glad i didnt invest in subpar analog goggles for crazy money compared to HD. Been flying for almost 4 months. I am considering waiting to see what competition comes out with (mostly because I shouldnt spend the cash on this system yet) lol
@MAD GRUMPYMAN It is heavy duty compared to other camera/vtx and reliability/quality is also much higher than what you're used to. I've crashed the acrobrat/dc3 and knocked my goggles off the table with my plane, antenna cover popped right back on and nothing broke.
I am planning on running a 4S LIPO with this, what would be the recommended capacity? I plan to use it for cinematic, running 1404 motors and want to maximise flight times.
I don't have the DJI system, but this frame was pretty cheap from my local vendor. I have a GepRC Cinestyle which unfortunately broke an arm some time back. So, because I don't have time to wait for shipping from Banggood, I ordered the DC3. The frame is quite well designed and all, but I have two major gripes. The first is the camera protection, or complete lack thereof. The camera sticks *way* out of the front of the frame. Any camera will break in a head-on collision. The TPU cameramounts can be re-designed so it sticks further out forward - but you'd have to print that yourself. Secondly, the top plate is only about one millimeter thick. I can't imagine that will hold up in a crash either. There are three pairs of vertical standoffs, which mounts the plate quite stiffly - but you can literally bend the plate between these standoffs. I haven't transplanted my quad to this frame yet, because I'm trying to work out how to avoid pulverizing my electronics the next time I crash. If the Armattan Gecko frame had not had M3 bolts, I would've gotten that instead of this frame.
How does this compare to the GEPRC Cinepro?? It looks like it flys great. I really want to get a 3 inch and have been unsure what to get. Cygnet3, Cinepro or the New Cinestyle(Basically a Cygnet3 Pro with a Tarsier 4k)? I can't find any reviews on the Cinestyle but from the videos GEP put out, it looks awesome. Now this has made me even more unsure. HELP...
Just built mine with the same specs. I noticed the air unit in the drone gets pretty hot when I was setting up the drone. Is this normal and does your do it.
Hi Justin Great video and review of the DJI DC 3HD , I don't know I know everyone is saying that the DJI system can't be beat. I have eight different quads and most are micros, I do have a Chameleon but that's it, Right now I can't see purchasing it I would like to see that the Google's could except 5.8ghz so we can still fly the rest of our quads. Thanks again for the info and advice on the DJI system and Iflight DC3.
Hey DC, please help me out here.. I'm wanting the NewBeeDrone 3in Whirligig frame that holds the heavy DJI Air unit.. What motors would you recommend?! Thank you
Hello! Thanks for the review !! I am new to FPV and I have questions.. If I buy the crossfire (long range) version of this quad, what else I need, to bind it with the Taranis X9D Plus 2019 ?? And could you provide links please if possible ? And if I chose no long range so what version I should choose to bind with my Taranis?
Great rewiev. I just bought the frame. Then i moved all my stuff from a "analog-Frame" on it. I attached the DJ-System on top by zipties XD. But it worked. On this frame with the same electronic, the quad fly's a lot smoother. (Hobywing xrotor nano combo
Ordered one a week ago. Nice review, although I doubt IFlight pays the Air Units the same as we do when they buy in bulk from DJI. I would say less. than half? I’m sure they make their sweet profit. Nothing wrong with that if it flies as you show.
Justin - check out the FlexRC Colugo 3" for DJI. I think it's even nicer than this frame and is very similar, has great TPU accessories and mounting for DJI stuff in it. I bought mine as a BnF from FlexRC but I'm actually rebuilding it using... the iFlight dual gyro F7 PnP 20x20 stack for DJI! Best of both worlds!
Awesome flying and video. Also love that quad. My only concern is all the RF with all those antenna pushing 5.8ghz frequency into your forehead. It can't be a good thing. But I love FPV myself. I guess you only live once and have to enjoy life. Great video👍👍👍
700mw is twice the RF of a cellular device at 0.35 watts or 0.4w close to center. Probably years from now when a kid asks "mommy is that a monster" no son he just used DJI goggles in the past.
@@dronecamps How much is the goggles is receiving from the 700mw that the transmitter is pushing out back to the goggles with four antennas.🤔🤔🤔🤔. Wouldn't it still be the same.
@@dronecamps so how is the 2 way communication working when only 1 way is able to achieve greater distance than the way back. If that is true than you would only have 2 way communication nearby ? Doesnt sound practical either. And now i wonder, does it transmit with an internal antenna or something or is something on the outside dedicated for it?
Hello, I’m new to FPV droning I’ve just purchased the DJI FPV Goggles & the DJI Controller, I’ve also just got the iFlight DC3 (including the camera setup) I’ve done no upgrades to any of the equipment, everything is stock. What battery would you recommend...? I’ve been watching videos on this but people say different things. I’ve got in my Amazon basket a few batteries in the 4S - 1500mah / 1800mah & 75c / 90c But is that the correct range of stats I should be looking at for the DC3..? Also is there any upgrades you would recommend to any of the equipment, I noticed you have different antennas on your DJI FPV Goggles, should I be upgrading them...? I’ve also seen people upgrade the red antennas on the DC3 drone for longer antennas. I’ve had my DJI Mavic 2 Pro & Mavic Mini for a while & I wanted to get into more FPV so I decided to go full in & buy the full setup but now I need some advice.
@@maxibtc Yea mostly because of the DJI system, but I also love how it flies and how quiet/smooth it is. Ive had my 349 since january and it was never tuned this good even using andyrc's pids. The 349 was a little faster but didn't feel as locked in as the DC3.
Let the HD Price competition start... my CX3 needs an HD brother. Great review. Reminded me of the Cygnet3 which I fell in love with. You should get out there by the coast again for an 3” HD head to head review!
Hello Justin, I'm a big fan of your TH-cam channel Drone Camps RC. I come from East Germany. I follow all of your videos with great interest about Race Copter. I then bought the iFlight Nazgul5 227mm 4S 5 inch FPV Racing drone from Banggood. Now I am looking for a 3 "Race unde Video Copter and have your video about the GepRc Run HD3 and 3 "QUAD OF THE YEAR - iFlight DC3 DJI Digital Quad seen. I just want to fly some freestyle and make some videos from the flight, but I just want to use the DJI video system. No additional camera. Can you help me please, Who takes the better shots? Which of the two had the longer flight times with a 4S 850mAh LiPo? I would be very happy to receive an answer from you. Best regards Mike Sorry for my bad english
@@dronecamps motors must turn the other way then cause all my other quads have to blades the other way round I only ask as I have one but not flown it yet waiting for my goggles
Sometimes they do a “props out” setup. The way you saw mine were they way they should fly in the stock setup. You can double check motor direction type in Betaflight on the config page. 👍🏻
I have this quadcopter. I have not touched the flight controller firmware. I did however decide to update my dji air unit to 1.0.4. Upon doing so, now I am no longer able to arm my quad. I get the green light on both the air unit as well as the transmitter indicating they are still bound to each other. Any ideas what might be wrong?
Quick update on this. I didn't realize that the DC3 was set to use s-bus baud fast out of the box. When I updated the DJI firmware on my devices, DJI forgot that it had been set to this previously. After doing some research I was eventually able to discover that there's a setting for this s-bus baud fast in the DJI headset itself that must be set... Upon setting this, my quadcopter is ready to rip again. Whew! Wish dji kept that setting during firmware update...or perhaps prompted if you wish to carry over your old settings into the latest firmware
IM HAVING YAW TWITCHING PROBLEMS WITH THIS QUAD . IT FLYS FOR A MINUTE OR SO THEN GOES INTO A VERY BAD YAW TWITCH . MADE ME SICK TO MY STOMACH . ANY IDEAS WHAT COULD BE GOING ON ? EYE TROUBLE I USE CAPS . WATCH YOU ALL THE TIME .
Drone Camps RC Hey I order the dc3 from banggood and selected the one without the receiver...I heard the one without the receiver wont work with my DJI transmitter and goggles.. is this true?
I'm so tired of hearing about the dji hd fad the channel is excellent and the information is always top notch I just can't & won't do another dji HD vid I'm not sold and I'm less then interested. But thank you for keeping up with the rest of the hobby your killing it, grate work! 🍻cheers🥃
50kT honestly I think it’s supposed to be that way, it seems to provide a channel for the wires as well as some buffering for the antennas. Only problem is if an antenna comes loose you have to basically take it apart to readjust them, but hey at least they aren’t falling off in a crash
Is the latency of the air unit of dji is 50ms..is it not much for a fast speed flier.. Good and low latencies are 35ms and under.. What do u have to say on this... Also will occusync air unit will do too? Will DJI goggles RE be ok on this?
Analog Cameras have 12-35ms latency (Oscar liang tests). When ur name is Mr.Steele, this will not work for you. For the rest of the World. Go for it and enjoy 😄
1408 with 2400 kg and 6s battery at 1000 mha you will get 9 minutes plus flight time on a 3 inch or a 4 inch. If you wont to see it just let me know and I will put one on my channel.
Maybe i can get used digital gear in a year or two!!! Looks like a blast and is what i have been waiting for!! I hate when my fat sharks break up when flying!! But i have no problem waiting a year or two. Maybe by that time i can learn acro and start flying more and working less!!! I need to make changes in my life!!! My job is driving me to a metal break down again!!! Working all night and all day for days takes a toll on your body mind and soul!!!! Im finding that im so depressed after work that i cant even fly. I want to see a doc but dnt like antidepressants or anything like that. But i really need 2 do something so i can enjoy life again!!!. But im going down a bad path again. Only thing is now i have a beautiful daughter anb i just need a break!!! Something in my life must change or im afraid i might go crazy!!! Im going 2 save up get a good laptop and start a channel for my daughter in a year ot two!!! Its the only thing keeping me from going crazy!!! The thought that my daughter could have a successful TH-cam toy review channel is a dream i really hope works out!!!! Then i could say no to work calls i dnt want to do if im working all night and have 2 work. the whole day the next day on no sleep its killing me!!! My dream is 2 make her a channel that somehow can make money so i can spend everyday with her!!! Well we all can dream!! I hope in a year or 2 that will all work out but i wont hold my breath lol!!! Thanks 4 Another. GREAT REVIEW!!!! 👍😀👍
DRONE review man of all drones Hey brother! I am a father of two small boys too and don’t get to fly enough but I am passionate about FPV. Don’t let work pull you down. Try to look for something else. Making money on TH-cam is not easy. As fathers we some times have to grind it out for our kids. Work hard, play hard (FPV). Use FPV to escape like me. Just finished up my hobby room to start building quads. Try to stay away from meds, FPV is our drug! And Dude! Go to an open field and just do acro! You just need enough space when taking off, once in the air you will get the hang of it quickly, promise! Best tip for me: always remember to fly forward, drifting back is dangerous for your quad in FPV 🤣Happy flying buddy and give your daughter a big hug! ✌🏻 😊
NEW // : 7% Off purchases is Coupon code use : DroneCampsRC
Thanks for the code! Just purchased this quad with DJI fpv system. Now the waiting begins... ☺️
argh coupon not working anymore :D
Was gonna buy the HD1 after work
So glad I seen your review
I dont want props in view
Thanks for such honest reviews
You should also check out the FlexRC Colugo 3" particularly if you're going to build yourself. I think it's TPU accessories and mounting of the air unit are even better than the DC3. I think using iFlights DJI 20x20 stack with it is the best all around setup.
@@protonus thanks brother
I'll check it out
could you please share the pids you got on it? rpm filtering on? i got really bad wobbles on mine by default
I've been loving my DC3 since I rec'd it 2 weeks ago. Worth every penny. I contaced IFlight in regards to provides STL files to print spare TPU parts.. They basically said NO FYI.. I'm using a 750mah 4s pack and the total weight is 259 grams.. FAA be damned :)
heya. Im interested in this drone and have no idea about fpv. In Europe we must register every drone (even 250 ones)... another user uses a 650 4S lipo and has a 249gr weight.. can you lower the weight even more to fix a 11gram strabo light and register plate?
Do you recommend this as a good 'starter' quad for someone new to the sport? Are the alternate antenna you've mounted really necessary? Also, I want to use the DJI radio...in that case, what set-up do you recommend? thanks!
strted quad.........build your first one........so when you crash and break the kwad you know how to fix it because you will crash.....often
Thanks Justin, really looking forward to your review of the 5 inch
The DJI gear comes out to EXACTLY the same price as the best analog equiv. Pick one- 10 to 15 ms latency drop or snow at every corner.
Is the iflight dc3 still the best 3 inch DJI quad or should I get something else?
Great review
Iflight just released their H frame version which shares they exact same specs of the the dc3.
A question, can it free style with minimal amp draw if 2203.5/ 2004 motor is used?
I noticed you are not using DJI controller, then how did you start the recording for the onboard air unit? Thanks!
You can just press the record button on the goggles. You have the option in the goggles menu to record to air unit only, goggles only, or both at the same time.
what antennas do you use at the goggles and (if it´s easy here to explain) why
Great little quad, good review👍👌
What's the difference between the iFlight Titan H3 HD and this one?
The frame. I prefer H frames over dead cats because they're easier to tune and feel more locked in on the roll axis. I just picked up the H3, there's a quick review of it on my channel.
PLEASE !! What cheap googles and transmitter reccomended? THANKS
does the drone send information about gps location and stuff? regular dji drones do
"Don't everybody get all paranoid at once. " lol!
Hi.
Thanks for your rewiew. I am interested in this frame but I am hearing criticism that it is not very resistant to shocks and immediately breaks. Can you give me your opinion? Thank you
How is the Flighttime with 4s 450mAh and 4s 850 mAh ?
4 mins to 8-10mins
I want one so bad so I'm saving up my money. I have only been flying fpv for the last 5 months. I haven't invested in fatshark goggles (I fly with the ev800d).
So as a person just getting into FPV, I'm going straight to digital.
Im in the same boat. EV800d. Running a qx7 w/ upgraded gimbals. Glad i didnt invest in subpar analog goggles for crazy money compared to HD. Been flying for almost 4 months. I am considering waiting to see what competition comes out with (mostly because I shouldnt spend the cash on this system yet) lol
@MAD GRUMPYMAN It is heavy duty compared to other camera/vtx and reliability/quality is also much higher than what you're used to. I've crashed the acrobrat/dc3 and knocked my goggles off the table with my plane, antenna cover popped right back on and nothing broke.
I am planning on running a 4S LIPO with this, what would be the recommended capacity? I plan to use it for cinematic, running 1404 motors and want to maximise flight times.
20:00 Could you put some sticky foam pads on the nose to protect the camera in case of a frontal crash?
What motors are you running? Is this the BNF version or did you build the frame?
Looking at that or the dc5 what would you recommend? Have you tune this??? Thanks
how can you send it with crossfire? I am puzzled - if you a dji set on?
You can fly miles on 700mw.
Drone Camps RC thanks. I meant are you using a crossfire TBs module and a dji fpv?
Yes on 2 different quads
Looking at this or the DC5.. thanks!
I don't have the DJI system, but this frame was pretty cheap from my local vendor. I have a GepRC Cinestyle which unfortunately broke an arm some time back. So, because I don't have time to wait for shipping from Banggood, I ordered the DC3. The frame is quite well designed and all, but I have two major gripes. The first is the camera protection, or complete lack thereof. The camera sticks *way* out of the front of the frame. Any camera will break in a head-on collision. The TPU cameramounts can be re-designed so it sticks further out forward - but you'd have to print that yourself. Secondly, the top plate is only about one millimeter thick. I can't imagine that will hold up in a crash either. There are three pairs of vertical standoffs, which mounts the plate quite stiffly - but you can literally bend the plate between these standoffs. I haven't transplanted my quad to this frame yet, because I'm trying to work out how to avoid pulverizing my electronics the next time I crash. If the Armattan Gecko frame had not had M3 bolts, I would've gotten that instead of this frame.
How does this compare to the GEPRC Cinepro?? It looks like it flys great. I really want to get a 3 inch and have been unsure what to get. Cygnet3, Cinepro or the New Cinestyle(Basically a Cygnet3 Pro with a Tarsier 4k)? I can't find any reviews on the Cinestyle but from the videos GEP put out, it looks awesome. Now this has made me even more unsure. HELP...
can you fit a gopro hero 8 on the front of that bad boy
Just built mine with the same specs. I noticed the air unit in the drone gets pretty hot when I was setting up the drone. Is this normal and does your do it.
Air unit gets very hot fast working on quad on bench, I use a fan to cool.
Hi Justin Great video and review of the DJI DC 3HD , I don't know I know everyone is saying that the DJI system can't be beat. I have eight different quads and most are micros, I do have a Chameleon but that's it, Right now I can't see purchasing it I would like to see that the Google's could except 5.8ghz so we can still fly the rest of our quads. Thanks again for the info and advice on the DJI system and Iflight DC3.
Hey DC, please help me out here.. I'm wanting the NewBeeDrone 3in Whirligig frame that holds the heavy DJI Air unit.. What motors would you recommend?! Thank you
Hello! Thanks for the review !! I am new to FPV and I have questions..
If I buy the crossfire (long range) version of this quad, what else I need, to bind it with the Taranis X9D Plus 2019 ?? And could you provide links please if possible ?
And if I chose no long range so what version I should choose to bind with my Taranis?
What PIDs do you have on this. Can we have
Great rewiev. I just bought the frame. Then i moved all my stuff from a "analog-Frame" on it. I attached the DJ-System on top by zipties XD. But it worked. On this frame with the same electronic, the quad fly's a lot smoother. (Hobywing xrotor nano combo
Ordered one a week ago. Nice review, although I doubt IFlight pays the Air Units the same as we do when they buy in bulk from DJI. I would say less. than half? I’m sure they make their sweet profit. Nothing wrong with that if it flies as you show.
Justin - check out the FlexRC Colugo 3" for DJI. I think it's even nicer than this frame and is very similar, has great TPU accessories and mounting for DJI stuff in it. I bought mine as a BnF from FlexRC but I'm actually rebuilding it using... the iFlight dual gyro F7 PnP 20x20 stack for DJI! Best of both worlds!
Have you tried the neo extreme 150c battery ??
Awesome flying and video. Also love that quad. My only concern is all the RF with all those antenna pushing 5.8ghz frequency into your forehead. It can't be a good thing. But I love FPV myself. I guess you only live once and have to enjoy life. Great video👍👍👍
700mw is twice the RF of a cellular device at 0.35 watts or 0.4w close to center. Probably years from now when a kid asks "mommy is that a monster" no son he just used DJI goggles in the past.
@@boratsagdiyev1586 🤣😂😂🤣😂 LMAO 😂
Guys the goggles don’t transmit 700mw. The transmitter does. You don’t have 700mw on your forehead. That’s the receiver side.
@@dronecamps How much is the goggles is receiving from the 700mw that the transmitter is pushing out back to the goggles with four antennas.🤔🤔🤔🤔. Wouldn't it still be the same.
@@dronecamps so how is the 2 way communication working when only 1 way is able to achieve greater distance than the way back. If that is true than you would only have 2 way communication nearby ? Doesnt sound practical either. And now i wonder, does it transmit with an internal antenna or something or is something on the outside dedicated for it?
Hello, I’m new to FPV droning
I’ve just purchased the DJI FPV Goggles & the DJI Controller, I’ve also just got the iFlight DC3 (including the camera setup) I’ve done no upgrades to any of the equipment, everything is stock.
What battery would you recommend...?
I’ve been watching videos on this but people say different things.
I’ve got in my Amazon basket a few batteries in the 4S - 1500mah / 1800mah & 75c / 90c
But is that the correct range of stats I should be looking at for the DC3..?
Also is there any upgrades you would recommend to any of the equipment, I noticed you have different antennas on your DJI FPV Goggles, should I be upgrading them...? I’ve also seen people upgrade the red antennas on the DC3 drone for longer antennas.
I’ve had my DJI Mavic 2 Pro & Mavic Mini for a while & I wanted to get into more FPV so I decided to go full in & buy the full setup but now I need some advice.
Those batteries are way too big bro, you want 650-850mah
Where is the bind button please??? I have the crossfire version!!! Please help!
"Quad of the year", again, so far, yet. More coming. Nice rig.
3”....
@@dronecamps Do you prefer it over the Diatone 349?
@@maxibtc I have both and obviously prefer the DC3
@@hildy2222 really? But because the dji system or why?
@@maxibtc Yea mostly because of the DJI system, but I also love how it flies and how quiet/smooth it is. Ive had my 349 since january and it was never tuned this good even using andyrc's pids. The 349 was a little faster but didn't feel as locked in as the DC3.
I just recieved my DC 3 today. What reciever is on your DC3?
Awesome! XM+ on mine Arlie. Happy Thanksgiving 🍁🍽🦃!
Thank you. Happy Thanksgiving to you and your family too.
Let the HD Price competition start... my CX3 needs an HD brother. Great review. Reminded me of the Cygnet3 which I fell in love with. You should get out there by the coast again for an 3” HD head to head review!
Yes man!
My daily fliers at the diatone gtr 369 and 339 cube
I need to rip!
Will the DC3 do it for me?
Awesome, i bought one already, can i copy your pids and rates thank you..
Can you use the Dji Racing edition Google's with this new Air unit? Ty
I'm not sure. I dont have them my friend. Someone else might know here?
Hello Justin,
I'm a big fan of your TH-cam channel
Drone Camps RC.
I come from East Germany.
I follow all of your videos with great interest
about Race Copter.
I then bought the iFlight Nazgul5 227mm 4S 5 inch FPV Racing drone from Banggood.
Now I am looking for a 3 "Race unde Video Copter
and have your video about the GepRc Run HD3 and
3 "QUAD OF THE YEAR - iFlight DC3 DJI Digital Quad seen.
I just want to fly some freestyle and make some videos from the flight, but I just want to use the DJI video system.
No additional camera.
Can you help me please,
Who takes the better shots?
Which of the two had the longer flight times with a 4S 850mAh LiPo?
I would be very happy to receive an answer from you.
Best regards Mike
Sorry for my bad english
Hi did you have to change the props ? as they appear to be the wrong way around
No
@@dronecamps motors must turn the other way then cause all my other quads have to blades the other way round
I only ask as I have one but not flown it yet waiting for my goggles
Sometimes they do a “props out” setup. The way you saw mine were they way they should fly in the stock setup. You can double check motor direction type in Betaflight on the config page. 👍🏻
Does theAir Unit comes soldered to the FC with all BETAFLIGHT options?
It comes plugged into the FC
I have this quadcopter. I have not touched the flight controller firmware. I did however decide to update my dji air unit to 1.0.4. Upon doing so, now I am no longer able to arm my quad. I get the green light on both the air unit as well as the transmitter indicating they are still bound to each other. Any ideas what might be wrong?
Quick update on this. I didn't realize that the DC3 was set to use s-bus baud fast out of the box. When I updated the DJI firmware on my devices, DJI forgot that it had been set to this previously. After doing some research I was eventually able to discover that there's a setting for this s-bus baud fast in the DJI headset itself that must be set... Upon setting this, my quadcopter is ready to rip again. Whew! Wish dji kept that setting during firmware update...or perhaps prompted if you wish to carry over your old settings into the latest firmware
Any issues with the DJI Air Unit overheating?
None so far
Does the DC3 come with blue camo motors now?
Mine did.. I ordered direct from Iflight
dcollea I ordered mine from iFlight too.. I ordered it over a week ago and it still says “processing”
How long did it take to get your quad?
If dji had box goggles with wide field of view that gives awesome immersion... I'd buy into this tomorrow.
dji view is wide enough,,,it frickin awesome,,,go buy it
Great video I’m buying one uk 🇬🇧
How can i use 4s battery with x60 this quad have xt30 ??
Adapters are $2
The link for this quad on bangood is a f4. Can you please post the link for the f7? And great video. Made want to buy it.
I just ordered the F4 version...maybe banggood with send the F7 ?
The dji fpv system have a osd ?
Right now only battery voltage and video link quality but its been confirmed DJI is adding more soon.
@@hildy2222 tks
+1 on "props in view looks cool"
IM HAVING YAW TWITCHING PROBLEMS WITH THIS QUAD . IT FLYS FOR A MINUTE OR SO THEN GOES INTO A VERY BAD YAW TWITCH . MADE ME SICK TO MY STOMACH . ANY IDEAS WHAT COULD BE GOING ON ? EYE TROUBLE I USE CAPS . WATCH YOU ALL THE TIME .
I have exactly the same. So far this is a dud quad.
@@Ben-dw8ts Its the gyro . Iflight/rdq's replaced my fc and now it works great . The fc has a v2 now .
You made me order one......damn you!
You’ll 🥰 it. 🙏🏼
Drone Camps RC
No doubt.
Drone Camps RC
Hey I order the dc3 from banggood and selected the one without the receiver...I heard the one without the receiver wont work with my DJI transmitter and goggles.. is this true?
I'm so tired of hearing about the dji hd fad the channel is excellent and the information is always top notch I just can't & won't do another dji HD vid I'm not sold and I'm less then interested. But thank you for keeping up with the rest of the hobby your killing it, grate work!
🍻cheers🥃
DC3 or DC5 ? Cant decide!
🤔
Could you also mount a go pro on this and have it fly well?
Boy can this guy fly
I'm torn between the Titan 5D and 3D
The next leap in FPV :D
I got mine and it’s funny I guess they installed my air unit upside down or something, they have it sitting on the bottom rather than floating
crap hope mine doesnt come that way
50kT honestly I think it’s supposed to be that way, it seems to provide a channel for the wires as well as some buffering for the antennas. Only problem is if an antenna comes loose you have to basically take it apart to readjust them, but hey at least they aren’t falling off in a crash
Is the latency of the air unit of dji is 50ms..is it not much for a fast speed flier.. Good and low latencies are 35ms and under.. What do u have to say on this...
Also will occusync air unit will do too? Will DJI goggles RE be ok on this?
This system runs for me on 20-25ms
Analog Cameras have 12-35ms latency (Oscar liang tests). When ur name is Mr.Steele, this will not work for you. For the rest of the World. Go for it and enjoy 😄
hey man,
i ordered the props you advertise for this quad
Recommended 3" Props : @t
they don't fit ..
And battery he recommends has different connector :) Find one review where he said he didn't liked the drone. I dare you.
1408 with 2400 kg and 6s battery at 1000 mha you will get 9 minutes plus flight time on a 3 inch or a 4 inch. If you wont to see it just let me know and I will put one on my channel.
Thought the camera worked with Fatshark goggles
spooner Fpv nope
🙌🙌🙌🙌
I wonder who actually gets into the hobby with the dji goggles..
I used to wonder who gets into the hobby with a $1400 Phantom. A lot actually.
A friend that saw me flying analog, is starting now with DJI. I’m so very tempted to sell the HDOs until they still have some value.
Maybe I didn't expect so, because I'm no adult that can spend tons on about anything
I just did....
Me as well
Maybe i can get used digital gear in a year or two!!! Looks like a blast and is what i have been waiting for!! I hate when my fat sharks break up when flying!! But i have no problem waiting a year or two. Maybe by that time i can learn acro and start flying more and working less!!! I need to make changes in my life!!! My job is driving me to a metal break down again!!! Working all night and all day for days takes a toll on your body mind and soul!!!! Im finding that im so depressed after work that i cant even fly. I want to see a doc but dnt like antidepressants or anything like that. But i really need 2 do something so i can enjoy life again!!!. But im going down a bad path again. Only thing is now i have a beautiful daughter anb i just need a break!!! Something in my life must change or im afraid i might go crazy!!! Im going 2 save up get a good laptop and start a channel for my daughter in a year ot two!!! Its the only thing keeping me from going crazy!!! The thought that my daughter could have a successful TH-cam toy review channel is a dream i really hope works out!!!! Then i could say no to work calls i dnt want to do if im working all night and have 2 work. the whole day the next day on no sleep its killing me!!! My dream is 2 make her a channel that somehow can make money so i can spend everyday with her!!! Well we all can dream!! I hope in a year or 2 that will all work out but i wont hold my breath lol!!! Thanks 4
Another. GREAT REVIEW!!!!
👍😀👍
DRONE review man of all drones Hey brother! I am a father of two small boys too and don’t get to fly enough but I am passionate about FPV. Don’t let work pull you down. Try to look for something else. Making money on TH-cam is not easy. As fathers we some times have to grind it out for our kids. Work hard, play hard (FPV). Use FPV to escape like me. Just finished up my hobby room to start building quads. Try to stay away from meds, FPV is our drug! And Dude! Go to an open field and just do acro! You just need enough space when taking off, once in the air you will get the hang of it quickly, promise! Best tip for me: always remember to fly forward, drifting back is dangerous for your quad in FPV 🤣Happy flying buddy and give your daughter a big hug! ✌🏻 😊
I dont like the position of the cam. Its to much out so one crash to the nose and u need a new cam.
Does DJI pay you?
Pay me? Fuck no. They don't pay anyone. That’s like saying Apple Pays me. In my dreams.
$$$$
can you fit a gopro hero 8 on the front of that bad boy