How To: Toyota Tundra Door Panel Removal and Door Handle Swap - Smart Key / Keyless Entry Guide
ฝัง
- เผยแพร่เมื่อ 1 ก.ค. 2024
- It's time for a swap! We picked up a 2021 Toyota Tundra and are ditching the chrome door handles to go color-matched. We have the Smart Key aka Keyless Entry on this truck so swapping the front handles requires a little bit of surgery and pulling of the door panel.
We'll walk you through the entire process of removing the door panel and swapping out the smart key handles!
SUBSCRIBE: bit.ly/2FMDw4i
Link to other Hotshot Offroad Goodies: bit.ly/3hKqG7f
Sections:
0:00 Intro
0:34 Tools
2:45 Door Panel Removal Steps and Process
9:45 Door Handle Swap
14:12 Reinstallation of Door Handle and Panel
19:34 Closing Remarks - ยานยนต์และพาหนะ
Great video, made it a breeze. I just pulled the plastic back though, it was super easy and stuck right back in place.
thanks
More than one way to get it done I suppose! We always knew that stuff to be pretty tough so it’s good to know.
Just knocked this out smoothly/quickly because of this video. Thanks for posting!
Glad it helped! We know there's not a ton of people who are willing to undertake this mod, but it certainly makes a big change in how things look.
Great Job!
Well done!
Thanks for this man!
Absolutely! Hope it helped!
Great video
Thanks! Hopefully it helped you out if you are doing this swap!
@@hotshotoffroad It totally helped. Went smoothly as to your detailed instruction. Great job.
Awesome 👌
Hopefully it helped out!
@@hotshotoffroad Your guidance was perfect , thank You for the detail video.
Colton,
Any chance you would be willing to post the part numbers for the door handles you installed? It would be really helpful. Thanks.
Absolutely! These were ordered through Sparks Parts. The part number they show on their website is PKKITCRSE. Here is a direct link as well.
www.sparksparts.com/p-tundra-smart-entry-handle-kit-crewmax-pkkitcrse
Thank you for the great video , most don't show the wired Keyless entry handles ! Best informed video I have seen , very helpful ! Great job , BUT YOU NEVER ADDRESSED THE LEFT HAND DRIVER'S DOOR W/ LOCK ???!!!! IT IS CLEARLY A DIFFERENT ANIMAL
Oh! The door lock part is actually really easy. The cap just pops off and swaps over. Apologies for forgetting about it though!
Awsome video on how to remove door panel. My question is, what yr is your tundra? I have a 2021 Platinum with cheesy chrome door handles looking to color match, but the local dealership says color match option not available for 21, which I have a hard time believing.
This truck is a 2021 as well. Here is where I picked my handles up from, and regardless of your color you should be able to source them here. I'm assuming you have Smart Entry with your Platinum. www.sparksparts.com/p-tundra-smart-entry-handle-kit-crewmax-pkkitcrse
@@hotshotoffroad Thanks for the reply!!, and again great job with video!!
You're quite welcome, and happy to help!
Where did you find the smart key handles? I’ve been searching the internet and can’t find. I have the same 2021 Tundra in magnetic grey metallic
I picked them up from a company called Sparks Parts. You can google them, and should be able to find painted smartkey handles there!
How do the rear door handles change out? I presume easier since no wire connection.
Quite easy! Same as the front except for not having to pull the door trim. A single bolt inside the door jamb and it comes right out.
WHERE DID YOU ORDER THEM FROM?
They were purchased from Sparks Parts. A Google search should pull them up for ya!